Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)

Failing for the past 76 builds (Since #2318 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20129): Process ended prematurely: osmo-stp_10.42.42.5(pid=20129) [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20129)]

Standard Output

----------------------------------------------
trial-2393 gprs:trx-b200 cs_paging_gprs_active.py
----------------------------------------------
19:00:57.746370 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:57.757545 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
19:00:57.901958 tst         cs_paging_gprs_active.py: using LAC 35616
19:00:58.027196 tst         cs_paging_gprs_active.py: using RAC 171
19:00:58.154557 tst         cs_paging_gprs_active.py: using CellId 35616
19:00:58.280188 tst         cs_paging_gprs_active.py: using BVCI 35617
19:00:58.304854 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.316088 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.327070 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.337995 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.349124 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.360188 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.371504 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.382788 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
19:00:58.394138 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
19:00:58.509450 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
19:00:58.795950 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
19:00:58.923363 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:00:59.237084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Launched
19:00:59.497979 run iperf3-srv_10.42.42.10(pid=20120): Launched
19:00:59.683208 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
19:00:59.809654 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:01:00.123117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20121): Launched
19:01:00.383563 run iperf3-srv_10.42.42.10(pid=20122): Launched
19:01:00.568459 tst      cs_paging_gprs_active.py:38: start network...
19:01:00.694533 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:01:01.222055 run         create_hlr_db(pid=20123): Launched
19:01:01.401595 bus                        /sierra_2: Setting Powered False
19:01:02.427380 run         create_hlr_db(pid=20123): Terminated: ok {rc=0}
19:01:02.834118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20125): Launched
19:01:03.137064 run   osmo-hlr_10.42.42.2(pid=20126): Launched
19:01:03.257346 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:01:03.785421 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20128): Launched
19:01:04.087296 run   osmo-stp_10.42.42.5(pid=20129): Launched
19:01:04.196524 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:01:04.723654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20131): Launched
19:01:04.831830 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:01:05.095621 run              patchelf(pid=20132): Launched
19:01:05.275021 run   osmo-stp_10.42.42.5(pid=20129): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20129)]
19:01:05.406134 run   osmo-stp_10.42.42.5(pid=20129): stdout: 
| (launched: 2022-12-13_19:01:03.938864)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:01:05.536126 run   osmo-stp_10.42.42.5(pid=20129): stderr: 
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213190104106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:01:05.661987 run   osmo-stp_10.42.42.5(pid=20129): stdout: 
| (launched: 2022-12-13_19:01:03.938864)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:01:05.786551 run   osmo-stp_10.42.42.5(pid=20129): stderr: 
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213190104106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213190104106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213190104107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:01:05.931529 run              patchelf(pid=20132): Terminating (SIGINT)
19:01:06.100817 run              patchelf(pid=20132): Terminated: ok {rc=0}
19:01:06.131925 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20129): Process ended prematurely: osmo-stp_10.42.42.5(pid=20129) [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20129)]  [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py:38]
19:01:06.141585 tst      cs_paging_gprs_active.py:38: Test FAILED (8.4 sec)
19:01:06.201205 run   osmo-hlr_10.42.42.2(pid=20126): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20126)]
19:01:06.249770 run   osmo-hlr_10.42.42.2(pid=20126): stdout: 
| (launched: 2022-12-13_19:01:02.988152) 
19:01:06.298903 run   osmo-hlr_10.42.42.2(pid=20126): stderr: 
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213190103162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213190103175 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213190103183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213190103184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213190103184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:01:06.340942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Terminating (SIGTERM)
19:01:06.380491 run iperf3-srv_10.42.42.10(pid=20120): Terminating (SIGTERM)
19:01:06.420087 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20121): Terminating (SIGTERM)
19:01:06.459555 run iperf3-srv_10.42.42.10(pid=20122): Terminating (SIGTERM)
19:01:06.499244 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20125): Terminating (SIGTERM)
19:01:06.538835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20128): Terminating (SIGTERM)
19:01:06.578808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20131): Terminating (SIGTERM)
19:01:06.587960 ---      ParallelTerminationStrategy: PID 20119 died...
19:01:06.641324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20119): Terminated: ok {rc=0}
19:01:06.650840 ---      ParallelTerminationStrategy: PID 20120 died...
19:01:06.703365 run iperf3-srv_10.42.42.10(pid=20120): Terminated {rc=256}
19:01:06.712681 ---      ParallelTerminationStrategy: PID 20121 died...
19:01:06.765044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20121): Terminated: ok {rc=0}
19:01:06.774461 ---      ParallelTerminationStrategy: PID 20122 died...
19:01:06.827049 run iperf3-srv_10.42.42.10(pid=20122): Terminated {rc=256}
19:01:06.836452 ---      ParallelTerminationStrategy: PID 20125 died...
19:01:06.888813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20125): Terminated: ok {rc=0}
19:01:06.898243 ---      ParallelTerminationStrategy: PID 20128 died...
19:01:06.950622 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20128): Terminated: ok {rc=0}
19:01:06.960123 ---      ParallelTerminationStrategy: PID 20131 died...
19:01:07.012624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20131): Terminated: ok {rc=0}
19:01:07.099927 bus                          /gobi_0: Setting Powered False
19:01:08.203192 bus                          /gobi_0: Setting Powered False
19:01:09.312793 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
    setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20129): Process ended prematurely: osmo-stp_10.42.42.5(pid=20129) [trial-2393↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20129)]