Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)

Failing for the past 257 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10564): Process ended prematurely: osmo-stp_10.42.42.5(pid=10564) [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10564)]

Standard Output

----------------------------------------------
trial-2395 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py
----------------------------------------------
22:55:13.075727 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.087122 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
22:55:13.231078 tst                        iperf3.py: using LAC 36795
22:55:13.348283 tst                        iperf3.py: using RAC 75
22:55:13.467121 tst                        iperf3.py: using CellId 36795
22:55:13.584286 tst                        iperf3.py: using BVCI 36796
22:55:13.607528 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.618462 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.629124 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.639686 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.650362 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.661092 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.671783 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.682337 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
22:55:13.693068 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
22:55:13.970794 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
22:55:14.097191 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:55:14.411848 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10556): Launched
22:55:14.673354 run iperf3-srv_10.42.42.10(pid=10557): Launched
22:55:14.858765 tst                      iperf3.py:8: start network...
22:55:14.985226 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:55:15.472343 run         create_hlr_db(pid=10558): Launched
22:55:15.647050 bus                          /gobi_6: Setting Powered False
22:55:16.724124 run         create_hlr_db(pid=10558): Terminated: ok {rc=0}
22:55:17.204129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10560): Launched
22:55:17.532774 run   osmo-hlr_10.42.42.2(pid=10561): Launched
22:55:17.656021 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:55:18.222749 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10563): Launched
22:55:18.548422 run   osmo-stp_10.42.42.5(pid=10564): Launched
22:55:18.667219 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:55:19.232627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10566): Launched
22:55:19.348567 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:55:19.631021 run              patchelf(pid=10567): Launched
22:55:19.821512 run   osmo-stp_10.42.42.5(pid=10564): ERR: Terminated: ERROR {rc=1}  [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10564)]
22:55:19.960076 run   osmo-stp_10.42.42.5(pid=10564): stdout: 
| (launched: 2022-12-13_22:55:18.388232)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:55:20.099024 run   osmo-stp_10.42.42.5(pid=10564): stderr: 
| �[0;m�[38;5;43m20221213225518582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213225518582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213225518583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213225518583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213225518583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213225518583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213225518584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:55:20.233719 run   osmo-stp_10.42.42.5(pid=10564): stdout: 
| (launched: 2022-12-13_22:55:18.388232)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:55:20.366975 run   osmo-stp_10.42.42.5(pid=10564): stderr: 
| �[0;m�[38;5;43m20221213225518582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213225518582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213225518583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213225518583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213225518583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213225518583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213225518584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:55:20.522306 run              patchelf(pid=10567): Terminating (SIGINT)
22:55:20.704403 run              patchelf(pid=10567): Terminated: ok {rc=0}
22:55:20.737935 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10564): Process ended prematurely: osmo-stp_10.42.42.5(pid=10564) [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10564)]  [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8]
22:55:20.748295 tst                      iperf3.py:8: Test FAILED (7.7 sec)
22:55:20.811809 run   osmo-hlr_10.42.42.2(pid=10561): ERR: Terminated: ERROR {rc=237}  [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10561)]
22:55:20.863169 run   osmo-hlr_10.42.42.2(pid=10561): stdout: 
| (launched: 2022-12-13_22:55:17.370838) 
22:55:20.915149 run   osmo-hlr_10.42.42.2(pid=10561): stderr: 
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213225517571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213225517582 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213225517590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213225517590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213225517590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:55:20.959525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10556): Terminating (SIGTERM)
22:55:21.001350 run iperf3-srv_10.42.42.10(pid=10557): Terminating (SIGTERM)
22:55:21.043051 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10560): Terminating (SIGTERM)
22:55:21.084713 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10563): Terminating (SIGTERM)
22:55:21.126493 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10566): Terminating (SIGTERM)
22:55:21.136147 ---      ParallelTerminationStrategy: PID 10556 died...
22:55:21.192441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10556): Terminated: ok {rc=0}
22:55:21.202655 ---      ParallelTerminationStrategy: PID 10557 died...
22:55:21.258554 run iperf3-srv_10.42.42.10(pid=10557): Terminated {rc=256}
22:55:21.268544 ---      ParallelTerminationStrategy: PID 10560 died...
22:55:21.324631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10560): Terminated: ok {rc=0}
22:55:21.334718 ---      ParallelTerminationStrategy: PID 10563 died...
22:55:21.390710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10563): Terminated: ok {rc=0}
22:55:21.400764 ---      ParallelTerminationStrategy: PID 10566 died...
22:55:21.456982 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10566): Terminated: ok {rc=0}
22:55:21.543754 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10564): Process ended prematurely: osmo-stp_10.42.42.5(pid=10564) [trial-2395↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10564)]