Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10724): Process ended prematurely: osmo-stp_10.42.42.5(pid=10724) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10724)]
Standard Output
---------------------------------------------- trial-2395 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 22:57:22.436257 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:22.448101 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:22.585856 tst iperf3m4.py: using LAC 36806 22:57:22.702658 tst iperf3m4.py: using RAC 86 22:57:22.819594 tst iperf3m4.py: using CellId 36806 22:57:22.938546 tst iperf3m4.py: using BVCI 36807 22:57:22.961333 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:22.972499 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:22.983635 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:22.994788 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.005964 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.017074 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.028332 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.039364 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:23.050751 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.167111 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.288866 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.407445 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:23.701866 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 22:57:23.836546 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:24.168733 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10710): Launched 22:57:24.444553 run iperf3-srv_10.42.42.10(pid=10711): Launched 22:57:24.641317 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 22:57:24.775388 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:25.107708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10712): Launched 22:57:25.382779 run iperf3-srv_10.42.42.10(pid=10713): Launched 22:57:25.579182 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 22:57:25.712937 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:26.045118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10714): Launched 22:57:26.321091 run iperf3-srv_10.42.42.10(pid=10715): Launched 22:57:26.517677 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 22:57:26.651597 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:26.983179 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10716): Launched 22:57:27.258802 run iperf3-srv_10.42.42.10(pid=10717): Launched 22:57:27.454454 tst iperf3m4.py:8: start network... 22:57:27.588075 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:28.093395 run create_hlr_db(pid=10718): Launched 22:57:28.278934 bus /gobi_6: Setting Powered False 22:57:29.300781 run create_hlr_db(pid=10718): Terminated: ok {rc=0} 22:57:29.703420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10720): Launched 22:57:30.003582 run osmo-hlr_10.42.42.2(pid=10721): Launched 22:57:30.122940 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:30.648750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10723): Launched 22:57:31.007278 run osmo-stp_10.42.42.5(pid=10724): Launched 22:57:31.235504 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:31.890140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10726): Launched 22:57:32.027358 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:32.329787 run patchelf(pid=10727): Launched 22:57:32.520036 run osmo-stp_10.42.42.5(pid=10724): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10724)] 22:57:32.658114 run osmo-stp_10.42.42.5(pid=10724): stdout: | (launched: 2022-12-13_22:57:30.801845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:32.796315 run osmo-stp_10.42.42.5(pid=10724): stderr: | �[0;m�[38;5;43m20221213225731165 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225731165 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225731166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225731166 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225731168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225731168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225731169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:32.930191 run osmo-stp_10.42.42.5(pid=10724): stdout: | (launched: 2022-12-13_22:57:30.801845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:33.062669 run osmo-stp_10.42.42.5(pid=10724): stderr: | �[0;m�[38;5;43m20221213225731165 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225731165 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225731166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225731166 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225731168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225731168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225731169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:33.216054 run patchelf(pid=10727): Terminating (SIGINT) 22:57:33.396451 run patchelf(pid=10727): Terminated: ok {rc=0} 22:57:33.429866 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10724): Process ended prematurely: osmo-stp_10.42.42.5(pid=10724) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10724)] [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 22:57:33.439989 tst iperf3m4.py:8: Test FAILED (11.0 sec) 22:57:33.503955 run osmo-hlr_10.42.42.2(pid=10721): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10721)] 22:57:33.555765 run osmo-hlr_10.42.42.2(pid=10721): stdout: | (launched: 2022-12-13_22:57:29.855928) 22:57:33.608413 run osmo-hlr_10.42.42.2(pid=10721): stderr: | �[0;m�[1;31m20221213225730030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213225730030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213225730030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213225730030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213225730030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213225730031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213225730043 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213225730053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213225730053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213225730053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:33.653063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10710): Terminating (SIGTERM) 22:57:33.695143 run iperf3-srv_10.42.42.10(pid=10711): Terminating (SIGTERM) 22:57:33.737823 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10712): Terminating (SIGTERM) 22:57:33.780251 run iperf3-srv_10.42.42.10(pid=10713): Terminating (SIGTERM) 22:57:33.823074 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10714): Terminating (SIGTERM) 22:57:33.865043 run iperf3-srv_10.42.42.10(pid=10715): Terminating (SIGTERM) 22:57:33.907311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10716): Terminating (SIGTERM) 22:57:33.949127 run iperf3-srv_10.42.42.10(pid=10717): Terminating (SIGTERM) 22:57:33.990935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10720): Terminating (SIGTERM) 22:57:34.032617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10723): Terminating (SIGTERM) 22:57:34.074553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10726): Terminating (SIGTERM) 22:57:34.083743 --- ParallelTerminationStrategy: PID 10710 died... 22:57:34.139990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10710): Terminated: ok {rc=0} 22:57:34.149968 --- ParallelTerminationStrategy: PID 10711 died... 22:57:34.205936 run iperf3-srv_10.42.42.10(pid=10711): Terminated {rc=256} 22:57:34.215767 --- ParallelTerminationStrategy: PID 10712 died... 22:57:34.271693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10712): Terminated: ok {rc=0} 22:57:34.281687 --- ParallelTerminationStrategy: PID 10713 died... 22:57:34.337715 run iperf3-srv_10.42.42.10(pid=10713): Terminated {rc=256} 22:57:34.347720 --- ParallelTerminationStrategy: PID 10714 died... 22:57:34.403851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10714): Terminated: ok {rc=0} 22:57:34.413917 --- ParallelTerminationStrategy: PID 10715 died... 22:57:34.469778 run iperf3-srv_10.42.42.10(pid=10715): Terminated {rc=256} 22:57:34.479716 --- ParallelTerminationStrategy: PID 10716 died... 22:57:34.535774 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10716): Terminated: ok {rc=0} 22:57:34.545831 --- ParallelTerminationStrategy: PID 10717 died... 22:57:34.601833 run iperf3-srv_10.42.42.10(pid=10717): Terminated {rc=256} 22:57:34.611781 --- ParallelTerminationStrategy: PID 10720 died... 22:57:34.668123 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10720): Terminated: ok {rc=0} 22:57:34.678182 --- ParallelTerminationStrategy: PID 10723 died... 22:57:34.734287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10723): Terminated: ok {rc=0} 22:57:34.744300 --- ParallelTerminationStrategy: PID 10726 died... 22:57:34.800631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10726): Terminated: ok {rc=0} 22:57:34.888678 bus /gobi_4: Setting Powered False 22:57:35.995738 bus /gobi_4: Setting Powered False 22:57:37.105156 bus /gobi_1: Setting Powered False 22:57:38.211311 bus /gobi_1: Setting Powered False 22:57:39.323587 bus /gobi_0: Setting Powered False 22:57:40.424798 bus /gobi_0: Setting Powered False 22:57:41.532636 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10724): Process ended prematurely: osmo-stp_10.42.42.5(pid=10724) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10724)]