Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5044): Process ended prematurely: osmo-stp_10.42.42.5(pid=5044) [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5044)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:59:12.380007 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.391213 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:59:12.520791 tst cs_paging_gprs_active.py: using LAC 36497 21:59:12.644929 tst cs_paging_gprs_active.py: using RAC 32 21:59:12.764258 tst cs_paging_gprs_active.py: using CellId 36497 21:59:12.881495 tst cs_paging_gprs_active.py: using BVCI 36498 21:59:12.904330 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.915049 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.925574 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.935945 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.946211 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.956393 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.966935 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.977193 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:12.987765 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:13.109956 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:13.387242 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:59:13.513771 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:13.823194 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5034): Launched 21:59:14.079232 run iperf3-srv_10.42.42.10(pid=5035): Launched 21:59:14.261973 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:59:14.385492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:14.694803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5036): Launched 21:59:14.951275 run iperf3-srv_10.42.42.10(pid=5037): Launched 21:59:15.133037 tst cs_paging_gprs_active.py:38: start network... 21:59:15.257282 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:59:15.736775 run create_hlr_db(pid=5038): Launched 21:59:15.910182 bus /gobi_6: Setting Powered False 21:59:16.931668 run create_hlr_db(pid=5038): Terminated: ok {rc=0} 21:59:17.351641 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5040): Launched 21:59:17.653263 run osmo-hlr_10.42.42.2(pid=5041): Launched 21:59:17.772459 run osmo-stp_10.42.42.5: Starting osmo-stp 21:59:18.298591 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5043): Launched 21:59:18.601651 run osmo-stp_10.42.42.5(pid=5044): Launched 21:59:18.721151 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:59:19.244896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5046): Launched 21:59:19.351273 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:59:19.612212 run patchelf(pid=5047): Launched 21:59:19.787016 run osmo-stp_10.42.42.5(pid=5044): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5044)] 21:59:19.915041 run osmo-stp_10.42.42.5(pid=5044): stdout: | (launched: 2022-12-13_21:59:18.450101) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:20.043201 run osmo-stp_10.42.42.5(pid=5044): stderr: | �[0;m�[38;5;43m20221213215918621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215918621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215918622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215918622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215918624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215918625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215918625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:20.167168 run osmo-stp_10.42.42.5(pid=5044): stdout: | (launched: 2022-12-13_21:59:18.450101) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:20.290602 run osmo-stp_10.42.42.5(pid=5044): stderr: | �[0;m�[38;5;43m20221213215918621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215918621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215918622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215918622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215918624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215918625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215918625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:20.433455 run patchelf(pid=5047): Terminating (SIGINT) 21:59:20.600489 run patchelf(pid=5047): Terminated: ok {rc=0} 21:59:20.631329 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5044): Process ended prematurely: osmo-stp_10.42.42.5(pid=5044) [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5044)] [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:59:20.640428 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 21:59:20.699859 run osmo-hlr_10.42.42.2(pid=5041): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5041)] 21:59:20.748254 run osmo-hlr_10.42.42.2(pid=5041): stdout: | (launched: 2022-12-13_21:59:17.504094) 21:59:20.797521 run osmo-hlr_10.42.42.2(pid=5041): stderr: | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213215917679 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213215917691 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213215917700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213215917700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213215917701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:59:20.839480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5034): Terminating (SIGTERM) 21:59:20.878911 run iperf3-srv_10.42.42.10(pid=5035): Terminating (SIGTERM) 21:59:20.918406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5036): Terminating (SIGTERM) 21:59:20.957653 run iperf3-srv_10.42.42.10(pid=5037): Terminating (SIGTERM) 21:59:20.997027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5040): Terminating (SIGTERM) 21:59:21.036323 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5043): Terminating (SIGTERM) 21:59:21.075773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5046): Terminating (SIGTERM) 21:59:21.084821 --- ParallelTerminationStrategy: PID 5034 died... 21:59:21.137603 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5034): Terminated: ok {rc=0} 21:59:21.147133 --- ParallelTerminationStrategy: PID 5035 died... 21:59:21.199465 run iperf3-srv_10.42.42.10(pid=5035): Terminated {rc=256} 21:59:21.208864 --- ParallelTerminationStrategy: PID 5036 died... 21:59:21.261221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5036): Terminated: ok {rc=0} 21:59:21.270658 --- ParallelTerminationStrategy: PID 5037 died... 21:59:21.323339 run iperf3-srv_10.42.42.10(pid=5037): Terminated {rc=256} 21:59:21.332606 --- ParallelTerminationStrategy: PID 5040 died... 21:59:21.385202 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5040): Terminated: ok {rc=0} 21:59:21.394557 --- ParallelTerminationStrategy: PID 5043 died... 21:59:21.447106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5043): Terminated: ok {rc=0} 21:59:21.456411 --- ParallelTerminationStrategy: PID 5046 died... 21:59:21.509011 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5046): Terminated: ok {rc=0} 21:59:21.597068 bus /gobi_0: Setting Powered False 21:59:22.700731 bus /gobi_0: Setting Powered False 21:59:23.810773 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5044): Process ended prematurely: osmo-stp_10.42.42.5(pid=5044) [trial-2395↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5044)]