Skip to content

Failed

gprs:oc2g.ping_idle_ping.py (from gprs_oc2g)

Failing for the past 257 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5026): Process ended prematurely: osmo-stp_10.42.42.5(pid=5026) [trial-2395↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5026)]

Standard Output

----------------------------------------------
trial-2395 gprs:oc2g ping_idle_ping.py
----------------------------------------------
21:59:03.061410 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.073417 tst                        gprs:oc2g: Using 1 x bts (candidates: 1)
21:59:03.202543 tst                ping_idle_ping.py: using LAC 36496
21:59:03.327161 tst                ping_idle_ping.py: using RAC 31
21:59:03.452304 tst                ping_idle_ping.py: using CellId 36496
21:59:03.578085 tst                ping_idle_ping.py: using BVCI 36497
21:59:03.602718 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.613643 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.624444 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.635200 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.646275 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.657358 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.668476 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
21:59:03.679606 tst                        gprs:oc2g: Using 1 x modem (candidates: 4)
21:59:03.955534 tst             ping_idle_ping.py:24: start network...
21:59:04.080584 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:59:04.563683 run          create_hlr_db(pid=5020): Launched
21:59:04.736366 bus                          /gobi_6: Setting Powered False
21:59:05.757906 run          create_hlr_db(pid=5020): Terminated: ok {rc=0}
21:59:06.186309 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5022): Launched
21:59:06.508268 run    osmo-hlr_10.42.42.2(pid=5023): Launched
21:59:06.627738 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:59:07.185666 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5025): Launched
21:59:07.508704 run    osmo-stp_10.42.42.5(pid=5026): Launched
21:59:07.625783 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:59:08.188792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5028): Launched
21:59:08.303619 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:59:08.584195 run               patchelf(pid=5029): Launched
21:59:08.772281 run    osmo-stp_10.42.42.5(pid=5026): ERR: Terminated: ERROR {rc=1}  [trial-2395↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5026)]
21:59:08.910143 run    osmo-stp_10.42.42.5(pid=5026): stdout: 
| (launched: 2022-12-13_21:59:07.349088)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:59:09.047750 run    osmo-stp_10.42.42.5(pid=5026): stderr: 
| �[0;m�[38;5;43m20221213215907543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213215907544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213215907544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213215907544 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:59:09.181932 run    osmo-stp_10.42.42.5(pid=5026): stdout: 
| (launched: 2022-12-13_21:59:07.349088)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:59:09.314291 run    osmo-stp_10.42.42.5(pid=5026): stderr: 
| �[0;m�[38;5;43m20221213215907543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213215907544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213215907544 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213215907544 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213215907545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:59:09.467993 run               patchelf(pid=5029): Terminating (SIGINT)
21:59:09.648052 run               patchelf(pid=5029): Terminated: ok {rc=0}
21:59:09.680610 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=5026): Process ended prematurely: osmo-stp_10.42.42.5(pid=5026) [trial-2395↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5026)]  [trial-2395↪gprs:oc2g↪ping_idle_ping.py:27]
21:59:09.689934 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
21:59:09.753292 run    osmo-hlr_10.42.42.2(pid=5023): ERR: Terminated: ERROR {rc=237}  [trial-2395↪gprs:oc2g↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5023)]
21:59:09.804854 run    osmo-hlr_10.42.42.2(pid=5023): stdout: 
| (launched: 2022-12-13_21:59:06.349797) 
21:59:09.856912 run    osmo-hlr_10.42.42.2(pid=5023): stderr: 
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213215906547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213215906559 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213215906567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213215906568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213215906568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:59:09.901651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5022): Terminating (SIGTERM)
21:59:09.943413 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5025): Terminating (SIGTERM)
21:59:09.985510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5028): Terminating (SIGTERM)
21:59:09.995376 ---      ParallelTerminationStrategy: PID 5022 died...
21:59:10.052083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5022): Terminated: ok {rc=0}
21:59:10.062349 ---      ParallelTerminationStrategy: PID 5025 died...
21:59:10.119496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5025): Terminated: ok {rc=0}
21:59:10.129997 ---      ParallelTerminationStrategy: PID 5028 died...
21:59:10.186285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5028): Terminated: ok {rc=0}
21:59:10.273918 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5026): Process ended prematurely: osmo-stp_10.42.42.5(pid=5026) [trial-2395↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5026)]