Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6242): Process ended prematurely: osmo-stp_10.42.42.5(pid=6242) [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6242)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:08:45.601472 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:45.612182 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:08:45.770135 tst cs_paging_gprs_active.py: using LAC 36548 22:08:45.902302 tst cs_paging_gprs_active.py: using RAC 83 22:08:46.025449 tst cs_paging_gprs_active.py: using CellId 36548 22:08:46.168671 tst cs_paging_gprs_active.py: using BVCI 36549 22:08:46.193407 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.205016 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.216540 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.228025 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.239439 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.250947 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.262499 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.273984 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:08:46.285563 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:46.407339 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:08:46.727284 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:08:46.867808 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:47.224337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6232): Launched 22:08:47.507285 run iperf3-srv_10.42.42.10(pid=6233): Launched 22:08:47.708312 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:08:47.845293 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:08:48.182015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6234): Launched 22:08:48.462670 run iperf3-srv_10.42.42.10(pid=6235): Launched 22:08:48.663025 tst cs_paging_gprs_active.py:38: start network... 22:08:48.800112 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:08:49.315606 run create_hlr_db(pid=6236): Launched 22:08:49.505076 bus /gobi_6: Setting Powered False 22:08:50.527005 run create_hlr_db(pid=6236): Terminated: ok {rc=0} 22:08:50.936574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6238): Launched 22:08:51.242144 run osmo-hlr_10.42.42.2(pid=6239): Launched 22:08:51.355179 run osmo-stp_10.42.42.5: Starting osmo-stp 22:08:51.882799 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6241): Launched 22:08:52.187749 run osmo-stp_10.42.42.5(pid=6242): Launched 22:08:52.298878 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:08:52.831199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6244): Launched 22:08:52.939943 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:08:53.206204 run patchelf(pid=6245): Launched 22:08:53.384440 run osmo-stp_10.42.42.5(pid=6242): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6242)] 22:08:53.514610 run osmo-stp_10.42.42.5(pid=6242): stdout: | (launched: 2022-12-13_22:08:52.037916) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:53.645247 run osmo-stp_10.42.42.5(pid=6242): stderr: | �[0;m�[38;5;43m20221213220852209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220852209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220852210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220852210 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220852210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220852211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220852211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:53.771128 run osmo-stp_10.42.42.5(pid=6242): stdout: | (launched: 2022-12-13_22:08:52.037916) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:08:53.895782 run osmo-stp_10.42.42.5(pid=6242): stderr: | �[0;m�[38;5;43m20221213220852209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220852209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220852210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220852210 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220852210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220852211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220852211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:08:54.041406 run patchelf(pid=6245): Terminating (SIGINT) 22:08:54.211524 run patchelf(pid=6245): Terminated: ok {rc=0} 22:08:54.242969 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6242): Process ended prematurely: osmo-stp_10.42.42.5(pid=6242) [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6242)] [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:08:54.252180 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:08:54.311859 run osmo-hlr_10.42.42.2(pid=6239): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6239)] 22:08:54.360660 run osmo-hlr_10.42.42.2(pid=6239): stdout: | (launched: 2022-12-13_22:08:51.091607) 22:08:54.410042 run osmo-hlr_10.42.42.2(pid=6239): stderr: | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220851268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220851280 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220851289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220851289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220851289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:08:54.451976 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6232): Terminating (SIGTERM) 22:08:54.491475 run iperf3-srv_10.42.42.10(pid=6233): Terminating (SIGTERM) 22:08:54.530893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6234): Terminating (SIGTERM) 22:08:54.570203 run iperf3-srv_10.42.42.10(pid=6235): Terminating (SIGTERM) 22:08:54.609526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6238): Terminating (SIGTERM) 22:08:54.648749 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6241): Terminating (SIGTERM) 22:08:54.688192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6244): Terminating (SIGTERM) 22:08:54.697324 --- ParallelTerminationStrategy: PID 6232 died... 22:08:54.750508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6232): Terminated: ok {rc=0} 22:08:54.759950 --- ParallelTerminationStrategy: PID 6233 died... 22:08:54.812341 run iperf3-srv_10.42.42.10(pid=6233): Terminated {rc=256} 22:08:54.821729 --- ParallelTerminationStrategy: PID 6234 died... 22:08:54.874363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6234): Terminated: ok {rc=0} 22:08:54.883840 --- ParallelTerminationStrategy: PID 6235 died... 22:08:54.936127 run iperf3-srv_10.42.42.10(pid=6235): Terminated {rc=256} 22:08:54.945584 --- ParallelTerminationStrategy: PID 6238 died... 22:08:54.997805 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6238): Terminated: ok {rc=0} 22:08:55.007242 --- ParallelTerminationStrategy: PID 6241 died... 22:08:55.059831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6241): Terminated: ok {rc=0} 22:08:55.069408 --- ParallelTerminationStrategy: PID 6244 died... 22:08:55.122458 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6244): Terminated: ok {rc=0} 22:08:55.205788 bus /gobi_0: Setting Powered False 22:08:56.312715 bus /gobi_0: Setting Powered False 22:08:57.421724 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6242): Process ended prematurely: osmo-stp_10.42.42.5(pid=6242) [trial-2395↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6242)]