Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 258 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]

Standard Output

----------------------------------------------
trial-2396 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
00:23:08.358570 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.370185 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
00:23:08.528665 tst                        iperf3.py: using LAC 37261
00:23:08.648681 tst                        iperf3.py: using RAC 31
00:23:08.769534 tst                        iperf3.py: using CellId 37261
00:23:08.888252 tst                        iperf3.py: using BVCI 37262
00:23:08.911318 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.922281 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.932925 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.943593 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.954788 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.966121 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.977572 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:08.988723 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:23:09.000045 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
00:23:09.294460 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:23:09.429606 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:23:09.764163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18405): Launched
00:23:10.041254 run iperf3-srv_10.42.42.10(pid=18406): Launched
00:23:10.239533 tst                      iperf3.py:8: start network...
00:23:10.374743 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:23:10.887835 run         create_hlr_db(pid=18407): Launched
00:23:11.074419 bus                          /gobi_6: Setting Powered False
00:23:12.086006 run         create_hlr_db(pid=18407): Terminated: ok {rc=0}
00:23:12.496457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Launched
00:23:12.798941 run   osmo-hlr_10.42.42.2(pid=18410): Launched
00:23:12.909203 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:23:13.431272 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Launched
00:23:13.731602 run   osmo-stp_10.42.42.5(pid=18413): Launched
00:23:13.840564 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:23:14.364033 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Launched
00:23:14.471333 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:23:14.734924 run              patchelf(pid=18416): Launched
00:23:14.911218 run   osmo-stp_10.42.42.5(pid=18413): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]
00:23:15.040384 run   osmo-stp_10.42.42.5(pid=18413): stdout: 
| (launched: 2022-12-14_00:23:13.584153)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:23:15.169728 run   osmo-stp_10.42.42.5(pid=18413): stderr: 
| �[0;m�[38;5;43m20221214002313756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214002313756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214002313757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214002313757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:23:15.294420 run   osmo-stp_10.42.42.5(pid=18413): stdout: 
| (launched: 2022-12-14_00:23:13.584153)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:23:15.417974 run   osmo-stp_10.42.42.5(pid=18413): stderr: 
| �[0;m�[38;5;43m20221214002313756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214002313756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214002313757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214002313757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214002313758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:23:15.562283 run              patchelf(pid=18416): Terminating (SIGINT)
00:23:15.731647 run              patchelf(pid=18416): Terminated: ok {rc=0}
00:23:15.762754 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]  [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
00:23:15.771843 tst                      iperf3.py:8: Test FAILED (7.4 sec)
00:23:15.838785 run   osmo-hlr_10.42.42.2(pid=18410): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18410)]
00:23:15.905872 run   osmo-hlr_10.42.42.2(pid=18410): stdout: 
| (launched: 2022-12-14_00:23:12.650101) 
00:23:15.970328 run   osmo-hlr_10.42.42.2(pid=18410): stderr: 
| �[0;m�[1;31m20221214002312827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214002312828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214002312828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214002312828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214002312828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214002312828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214002312840 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214002312849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214002312850 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214002312850 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:23:16.017303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18405): Terminating (SIGTERM)
00:23:16.064225 run iperf3-srv_10.42.42.10(pid=18406): Terminating (SIGTERM)
00:23:16.110163 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Terminating (SIGTERM)
00:23:16.156556 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Terminating (SIGTERM)
00:23:16.204106 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Terminating (SIGTERM)
00:23:16.215102 ---      ParallelTerminationStrategy: PID 18405 died...
00:23:16.277243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18405): Terminated: ok {rc=0}
00:23:16.289371 ---      ParallelTerminationStrategy: PID 18406 died...
00:23:16.348207 run iperf3-srv_10.42.42.10(pid=18406): Terminated {rc=256}
00:23:16.359296 ---      ParallelTerminationStrategy: PID 18409 died...
00:23:16.419161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18409): Terminated: ok {rc=0}
00:23:16.430699 ---      ParallelTerminationStrategy: PID 18412 died...
00:23:16.491253 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18412): Terminated: ok {rc=0}
00:23:16.502465 ---      ParallelTerminationStrategy: PID 18415 died...
00:23:16.562518 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18415): Terminated: ok {rc=0}
00:23:16.661542 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18413): Process ended prematurely: osmo-stp_10.42.42.5(pid=18413) [trial-2396↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18413)]