Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 258 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=13868): Process ended prematurely: osmo-stp_10.42.42.5(pid=13868) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13868)]

Standard Output

----------------------------------------------
trial-2396 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
23:38:13.846155 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:13.858603 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:38:14.009185 tst                        iperf3.py: using LAC 37020
23:38:14.134700 tst                        iperf3.py: using RAC 45
23:38:14.255373 tst                        iperf3.py: using CellId 37020
23:38:14.373910 tst                        iperf3.py: using BVCI 37021
23:38:14.396746 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.407908 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.419123 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.430138 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.441073 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.451911 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.463564 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.474535 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:14.485644 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:38:14.776897 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
23:38:14.910098 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:38:15.240039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13860): Launched
23:38:15.513748 run iperf3-srv_10.42.42.10(pid=13861): Launched
23:38:15.709551 tst                      iperf3.py:8: start network...
23:38:15.855067 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:38:16.417009 run         create_hlr_db(pid=13862): Launched
23:38:16.605847 bus                          /gobi_6: Setting Powered False
23:38:17.623337 run         create_hlr_db(pid=13862): Terminated: ok {rc=0}
23:38:18.046922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13864): Launched
23:38:18.365925 run   osmo-hlr_10.42.42.2(pid=13865): Launched
23:38:18.486420 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:38:19.039817 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13867): Launched
23:38:19.358418 run   osmo-stp_10.42.42.5(pid=13868): Launched
23:38:19.474468 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:38:20.029067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13870): Launched
23:38:20.143725 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:38:20.421119 run              patchelf(pid=13871): Launched
23:38:20.608073 run   osmo-stp_10.42.42.5(pid=13868): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13868)]
23:38:20.745139 run   osmo-stp_10.42.42.5(pid=13868): stdout: 
| (launched: 2022-12-13_23:38:19.202199)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:20.882407 run   osmo-stp_10.42.42.5(pid=13868): stderr: 
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213233819395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:21.014730 run   osmo-stp_10.42.42.5(pid=13868): stdout: 
| (launched: 2022-12-13_23:38:19.202199)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:21.146514 run   osmo-stp_10.42.42.5(pid=13868): stderr: 
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213233819394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213233819395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213233819395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:21.299451 run              patchelf(pid=13871): Terminating (SIGINT)
23:38:21.479435 run              patchelf(pid=13871): Terminated: ok {rc=0}
23:38:21.512441 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13868): Process ended prematurely: osmo-stp_10.42.42.5(pid=13868) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13868)]  [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
23:38:21.522625 tst                      iperf3.py:8: Test FAILED (7.7 sec)
23:38:21.585571 run   osmo-hlr_10.42.42.2(pid=13865): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13865)]
23:38:21.636782 run   osmo-hlr_10.42.42.2(pid=13865): stdout: 
| (launched: 2022-12-13_23:38:18.209416) 
23:38:21.688604 run   osmo-hlr_10.42.42.2(pid=13865): stderr: 
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213233818407 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213233818420 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213233818430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213233818430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213233818430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:38:21.732884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13860): Terminating (SIGTERM)
23:38:21.774474 run iperf3-srv_10.42.42.10(pid=13861): Terminating (SIGTERM)
23:38:21.816612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13864): Terminating (SIGTERM)
23:38:21.858644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13867): Terminating (SIGTERM)
23:38:21.900907 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13870): Terminating (SIGTERM)
23:38:21.910511 ---      ParallelTerminationStrategy: PID 13860 died...
23:38:21.966598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13860): Terminated: ok {rc=0}
23:38:21.976651 ---      ParallelTerminationStrategy: PID 13861 died...
23:38:22.032549 run iperf3-srv_10.42.42.10(pid=13861): Terminated {rc=256}
23:38:22.042621 ---      ParallelTerminationStrategy: PID 13864 died...
23:38:22.098291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13864): Terminated: ok {rc=0}
23:38:22.108454 ---      ParallelTerminationStrategy: PID 13867 died...
23:38:22.163947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13867): Terminated: ok {rc=0}
23:38:22.174018 ---      ParallelTerminationStrategy: PID 13870 died...
23:38:22.229672 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13870): Terminated: ok {rc=0}
23:38:22.316094 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13868): Process ended prematurely: osmo-stp_10.42.42.5(pid=13868) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13868)]