Skip to content

Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 258 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15158): Process ended prematurely: osmo-stp_10.42.42.5(pid=15158) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15158)]

Standard Output

----------------------------------------------
trial-2396 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
23:52:41.810822 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:41.822816 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
23:52:41.964390 tst                          ping.py: using LAC 37098
23:52:42.088455 tst                          ping.py: using RAC 123
23:52:42.204402 tst                          ping.py: using CellId 37098
23:52:42.319039 tst                          ping.py: using BVCI 37099
23:52:42.341483 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.352671 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.363413 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.373989 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.384892 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.395982 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.407427 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:42.418580 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
23:52:42.706342 tst                       ping.py:19: start network...
23:52:42.837163 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:52:43.330908 run         create_hlr_db(pid=15152): Launched
23:52:43.515145 bus                          /gobi_6: Setting Powered False
23:52:44.526127 run         create_hlr_db(pid=15152): Terminated: ok {rc=0}
23:52:44.950729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15154): Launched
23:52:45.265183 run   osmo-hlr_10.42.42.2(pid=15155): Launched
23:52:45.382999 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:52:45.974203 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15157): Launched
23:52:46.378632 run   osmo-stp_10.42.42.5(pid=15158): Launched
23:52:46.641321 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:52:47.210683 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15160): Launched
23:52:47.316380 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:52:47.573698 run              patchelf(pid=15161): Launched
23:52:47.746569 run   osmo-stp_10.42.42.5(pid=15158): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15158)]
23:52:47.873065 run   osmo-stp_10.42.42.5(pid=15158): stdout: 
| (launched: 2022-12-13_23:52:46.129485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:52:47.999556 run   osmo-stp_10.42.42.5(pid=15158): stderr: 
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213235246419 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:52:48.121752 run   osmo-stp_10.42.42.5(pid=15158): stdout: 
| (launched: 2022-12-13_23:52:46.129485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:52:48.243176 run   osmo-stp_10.42.42.5(pid=15158): stderr: 
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213235246419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213235246419 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235246422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:52:48.383542 run              patchelf(pid=15161): Terminating (SIGINT)
23:52:48.549165 run              patchelf(pid=15161): Terminated: ok {rc=0}
23:52:48.579351 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15158): Process ended prematurely: osmo-stp_10.42.42.5(pid=15158) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15158)]  [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
23:52:48.588059 tst                       ping.py:22: Test FAILED (6.8 sec)
23:52:48.648367 run   osmo-hlr_10.42.42.2(pid=15155): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15155)]
23:52:48.697431 run   osmo-hlr_10.42.42.2(pid=15155): stdout: 
| (launched: 2022-12-13_23:52:45.110754) 
23:52:48.747156 run   osmo-hlr_10.42.42.2(pid=15155): stderr: 
| �[0;m�[1;31m20221213235245307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213235245307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213235245308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213235245308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213235245308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213235245308 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213235245320 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213235245329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213235245329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213235245329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:52:48.789437 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15154): Terminating (SIGTERM)
23:52:48.829311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15157): Terminating (SIGTERM)
23:52:48.869426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15160): Terminating (SIGTERM)
23:52:48.878769 ---      ParallelTerminationStrategy: PID 15154 died...
23:52:48.932368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15154): Terminated: ok {rc=0}
23:52:48.942145 ---      ParallelTerminationStrategy: PID 15157 died...
23:52:48.995389 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15157): Terminated: ok {rc=0}
23:52:49.005208 ---      ParallelTerminationStrategy: PID 15160 died...
23:52:49.058383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15160): Terminated: ok {rc=0}
23:52:49.146384 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15158): Process ended prematurely: osmo-stp_10.42.42.5(pid=15158) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15158)]