Skip to content

Failed

gprs:trx-umtrx.ping.py (from gprs_trx-umtrx)

Failing for the past 197 builds (Since #2200 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15090): Process ended prematurely: osmo-stp_10.42.42.5(pid=15090) [trial-2396↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15090)]

Standard Output

----------------------------------------------
trial-2396 gprs:trx-umtrx ping.py
----------------------------------------------
23:51:42.428707 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.440518 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
23:51:42.579333 tst                          ping.py: using LAC 37093
23:51:42.693259 tst                          ping.py: using RAC 118
23:51:42.807306 tst                          ping.py: using CellId 37093
23:51:42.921554 tst                          ping.py: using BVCI 37094
23:51:42.944023 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.954552 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.964845 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.975199 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.985515 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:42.995661 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:43.006039 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
23:51:43.016369 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
23:51:43.284192 tst                       ping.py:19: start network...
23:51:43.405775 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:51:43.876047 run         create_hlr_db(pid=15084): Launched
23:51:44.044680 bus                          /gobi_6: Setting Powered False
23:51:45.066158 run         create_hlr_db(pid=15084): Terminated: ok {rc=0}
23:51:45.483210 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15086): Launched
23:51:45.797020 run   osmo-hlr_10.42.42.2(pid=15087): Launched
23:51:46.048452 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:51:46.631491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15089): Launched
23:51:47.050093 run   osmo-stp_10.42.42.5(pid=15090): Launched
23:51:47.171857 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:51:47.753950 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15092): Launched
23:51:47.866800 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:51:48.140940 run              patchelf(pid=15094): Launched
23:51:48.324912 run   osmo-stp_10.42.42.5(pid=15090): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15090)]
23:51:48.460332 run   osmo-stp_10.42.42.5(pid=15090): stdout: 
| (launched: 2022-12-13_23:51:46.795207)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:51:48.595502 run   osmo-stp_10.42.42.5(pid=15090): stderr: 
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213235147155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:51:48.726429 run   osmo-stp_10.42.42.5(pid=15090): stdout: 
| (launched: 2022-12-13_23:51:46.795207)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:51:48.856071 run   osmo-stp_10.42.42.5(pid=15090): stderr: 
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213235147155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213235147155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213235147156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:51:49.006412 run              patchelf(pid=15094): Terminating (SIGINT)
23:51:49.182317 run              patchelf(pid=15094): Terminated: ok {rc=0}
23:51:49.214318 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15090): Process ended prematurely: osmo-stp_10.42.42.5(pid=15090) [trial-2396↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15090)]  [trial-2396↪gprs:trx-umtrx↪ping.py:22]
23:51:49.223360 tst                       ping.py:22: Test FAILED (6.8 sec)
23:51:49.286131 run   osmo-hlr_10.42.42.2(pid=15087): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-umtrx↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15087)]
23:51:49.337189 run   osmo-hlr_10.42.42.2(pid=15087): stdout: 
| (launched: 2022-12-13_23:51:45.643113) 
23:51:49.388926 run   osmo-hlr_10.42.42.2(pid=15087): stderr: 
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213235145866 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213235145881 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-umtrx/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213235145901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213235145901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213235145901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:51:49.432852 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15086): Terminating (SIGTERM)
23:51:49.475344 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15089): Terminating (SIGTERM)
23:51:49.516690 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15092): Terminating (SIGTERM)
23:51:49.526372 ---      ParallelTerminationStrategy: PID 15086 died...
23:51:49.582505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15086): Terminated: ok {rc=0}
23:51:49.592511 ---      ParallelTerminationStrategy: PID 15089 died...
23:51:49.648379 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15089): Terminated: ok {rc=0}
23:51:49.658299 ---      ParallelTerminationStrategy: PID 15092 died...
23:51:49.713777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15092): Terminated: ok {rc=0}
23:51:49.799279 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15090): Process ended prematurely: osmo-stp_10.42.42.5(pid=15090) [trial-2396↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15090)]