Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 259 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]

Standard Output

----------------------------------------------
trial-2397 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
01:45:58.171970 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.183661 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
01:45:58.331627 tst                        iperf3.py: using LAC 37689
01:45:58.451090 tst                        iperf3.py: using RAC 204
01:45:58.570218 tst                        iperf3.py: using CellId 37689
01:45:58.687762 tst                        iperf3.py: using BVCI 37690
01:45:58.710852 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.721922 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.732797 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.743583 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.754485 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.765328 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.776092 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.786788 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:45:58.797803 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
01:45:59.092497 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:45:59.227985 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:45:59.565726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Launched
01:45:59.847165 run iperf3-srv_10.42.42.10(pid=25559): Launched
01:46:00.046491 tst                      iperf3.py:8: start network...
01:46:00.182161 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:46:00.690837 run         create_hlr_db(pid=25560): Launched
01:46:00.881123 bus                          /gobi_6: Setting Powered False
01:46:01.909256 run         create_hlr_db(pid=25560): Terminated: ok {rc=0}
01:46:02.391098 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Launched
01:46:02.714986 run   osmo-hlr_10.42.42.2(pid=25563): Launched
01:46:02.834862 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:46:03.398722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Launched
01:46:03.722889 run   osmo-stp_10.42.42.5(pid=25566): Launched
01:46:03.840302 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:46:04.406703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Launched
01:46:04.522402 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:46:04.807106 run              patchelf(pid=25569): Launched
01:46:04.997579 run   osmo-stp_10.42.42.5(pid=25566): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]
01:46:05.136567 run   osmo-stp_10.42.42.5(pid=25566): stdout: 
| (launched: 2022-12-14_01:46:03.563407)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:46:05.275799 run   osmo-stp_10.42.42.5(pid=25566): stderr: 
| �[0;m�[38;5;43m20221214014603753 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214014603754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214014603754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214014603754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:46:05.409680 run   osmo-stp_10.42.42.5(pid=25566): stdout: 
| (launched: 2022-12-14_01:46:03.563407)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:46:05.542257 run   osmo-stp_10.42.42.5(pid=25566): stderr: 
| �[0;m�[38;5;43m20221214014603753 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214014603754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214014603754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214014603754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214014603755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:46:05.696922 run              patchelf(pid=25569): Terminating (SIGINT)
01:46:05.879244 run              patchelf(pid=25569): Terminated: ok {rc=0}
01:46:05.912720 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
01:46:05.922855 tst                      iperf3.py:8: Test FAILED (7.8 sec)
01:46:05.986145 run   osmo-hlr_10.42.42.2(pid=25563): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25563)]
01:46:06.037624 run   osmo-hlr_10.42.42.2(pid=25563): stdout: 
| (launched: 2022-12-14_01:46:02.555411) 
01:46:06.089668 run   osmo-hlr_10.42.42.2(pid=25563): stderr: 
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214014602751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214014602763 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214014602771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214014602772 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214014602772 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:46:06.134395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Terminating (SIGTERM)
01:46:06.176582 run iperf3-srv_10.42.42.10(pid=25559): Terminating (SIGTERM)
01:46:06.218879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Terminating (SIGTERM)
01:46:06.261106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Terminating (SIGTERM)
01:46:06.303255 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Terminating (SIGTERM)
01:46:06.312922 ---      ParallelTerminationStrategy: PID 25558 died...
01:46:06.369541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25558): Terminated: ok {rc=0}
01:46:06.379661 ---      ParallelTerminationStrategy: PID 25559 died...
01:46:06.435660 run iperf3-srv_10.42.42.10(pid=25559): Terminated {rc=256}
01:46:06.446027 ---      ParallelTerminationStrategy: PID 25562 died...
01:46:06.501549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25562): Terminated: ok {rc=0}
01:46:06.511467 ---      ParallelTerminationStrategy: PID 25565 died...
01:46:06.567285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25565): Terminated: ok {rc=0}
01:46:06.577404 ---      ParallelTerminationStrategy: PID 25568 died...
01:46:06.633618 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25568): Terminated: ok {rc=0}
01:46:06.722165 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25566): Process ended prematurely: osmo-stp_10.42.42.5(pid=25566) [trial-2397↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25566)]