Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)

Failing for the past 80 builds (Since #2318 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=21733): Process ended prematurely: osmo-stp_10.42.42.5(pid=21733) [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21733)]

Standard Output

----------------------------------------------
trial-2397 gprs:trx-b200 cs_paging_gprs_active.py
----------------------------------------------
01:02:42.012431 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.023441 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
01:02:42.162029 tst         cs_paging_gprs_active.py: using LAC 37460
01:02:42.280595 tst         cs_paging_gprs_active.py: using RAC 230
01:02:42.399951 tst         cs_paging_gprs_active.py: using CellId 37460
01:02:42.520540 tst         cs_paging_gprs_active.py: using BVCI 37461
01:02:42.543419 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.554396 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.565041 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.575590 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.586660 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.597682 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.608826 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.619821 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:42.631011 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
01:02:42.751230 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
01:02:43.030129 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
01:02:43.155983 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:02:43.468266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21723): Launched
01:02:43.728163 run iperf3-srv_10.42.42.10(pid=21724): Launched
01:02:43.911738 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
01:02:44.036191 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:02:44.348045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Launched
01:02:44.606529 run iperf3-srv_10.42.42.10(pid=21726): Launched
01:02:44.789286 tst      cs_paging_gprs_active.py:38: start network...
01:02:44.913480 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:02:45.394593 run         create_hlr_db(pid=21727): Launched
01:02:45.567765 bus                        /sierra_2: Setting Powered False
01:02:46.642451 run         create_hlr_db(pid=21727): Terminated: ok {rc=0}
01:02:47.091731 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21729): Launched
01:02:47.418999 run   osmo-hlr_10.42.42.2(pid=21730): Launched
01:02:47.541575 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:02:48.104888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21732): Launched
01:02:48.428867 run   osmo-stp_10.42.42.5(pid=21733): Launched
01:02:48.546292 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:02:49.111941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21735): Launched
01:02:49.228004 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:02:49.512243 run              patchelf(pid=21736): Launched
01:02:49.703413 run   osmo-stp_10.42.42.5(pid=21733): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21733)]
01:02:49.843210 run   osmo-stp_10.42.42.5(pid=21733): stdout: 
| (launched: 2022-12-14_01:02:48.268776)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:49.983108 run   osmo-stp_10.42.42.5(pid=21733): stderr: 
| �[0;m�[38;5;43m20221214010248456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214010248456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214010248457 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214010248457 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214010248457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214010248458 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214010248458 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:50.117614 run   osmo-stp_10.42.42.5(pid=21733): stdout: 
| (launched: 2022-12-14_01:02:48.268776)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:50.250961 run   osmo-stp_10.42.42.5(pid=21733): stderr: 
| �[0;m�[38;5;43m20221214010248456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214010248456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214010248457 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214010248457 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214010248457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214010248458 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214010248458 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:50.406402 run              patchelf(pid=21736): Terminating (SIGINT)
01:02:50.588779 run              patchelf(pid=21736): Terminated: ok {rc=0}
01:02:50.622229 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21733): Process ended prematurely: osmo-stp_10.42.42.5(pid=21733) [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21733)]  [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py:38]
01:02:50.632121 tst      cs_paging_gprs_active.py:38: Test FAILED (8.7 sec)
01:02:50.695262 run   osmo-hlr_10.42.42.2(pid=21730): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21730)]
01:02:50.746280 run   osmo-hlr_10.42.42.2(pid=21730): stdout: 
| (launched: 2022-12-14_01:02:47.259076) 
01:02:50.798051 run   osmo-hlr_10.42.42.2(pid=21730): stderr: 
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214010247452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214010247465 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214010247473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214010247474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214010247474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:02:50.842393 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21723): Terminating (SIGTERM)
01:02:50.883873 run iperf3-srv_10.42.42.10(pid=21724): Terminating (SIGTERM)
01:02:50.925742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Terminating (SIGTERM)
01:02:50.967646 run iperf3-srv_10.42.42.10(pid=21726): Terminating (SIGTERM)
01:02:51.009456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21729): Terminating (SIGTERM)
01:02:51.051233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21732): Terminating (SIGTERM)
01:02:51.093447 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21735): Terminating (SIGTERM)
01:02:51.103094 ---      ParallelTerminationStrategy: PID 21723 died...
01:02:51.159353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21723): Terminated: ok {rc=0}
01:02:51.169472 ---      ParallelTerminationStrategy: PID 21724 died...
01:02:51.225187 run iperf3-srv_10.42.42.10(pid=21724): Terminated {rc=256}
01:02:51.234995 ---      ParallelTerminationStrategy: PID 21725 died...
01:02:51.290239 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Terminated: ok {rc=0}
01:02:51.300177 ---      ParallelTerminationStrategy: PID 21726 died...
01:02:51.355723 run iperf3-srv_10.42.42.10(pid=21726): Terminated {rc=256}
01:02:51.365998 ---      ParallelTerminationStrategy: PID 21729 died...
01:02:51.421456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21729): Terminated: ok {rc=0}
01:02:51.431402 ---      ParallelTerminationStrategy: PID 21732 died...
01:02:51.487031 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21732): Terminated: ok {rc=0}
01:02:51.497177 ---      ParallelTerminationStrategy: PID 21735 died...
01:02:51.553164 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21735): Terminated: ok {rc=0}
01:02:51.640716 bus                          /gobi_0: Setting Powered False
01:02:52.746884 bus                          /gobi_0: Setting Powered False
01:02:53.857860 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
    setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21733): Process ended prematurely: osmo-stp_10.42.42.5(pid=21733) [trial-2397↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21733)]