Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22826): Process ended prematurely: osmo-stp_10.42.42.5(pid=22826) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22826)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:14:38.174530 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.186313 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:14:38.356747 tst cs_paging_gprs_active.py: using LAC 37522 01:14:38.489738 tst cs_paging_gprs_active.py: using RAC 37 01:14:38.616563 tst cs_paging_gprs_active.py: using CellId 37522 01:14:38.743662 tst cs_paging_gprs_active.py: using BVCI 37523 01:14:38.769169 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.780776 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.792422 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.804060 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.815758 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.827589 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.839614 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.851484 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:38.863545 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:14:38.982165 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:14:39.283486 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:14:39.421333 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:14:39.766684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22816): Launched 01:14:40.054289 run iperf3-srv_10.42.42.10(pid=22817): Launched 01:14:40.257777 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:14:40.396092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:14:40.741894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22818): Launched 01:14:41.028575 run iperf3-srv_10.42.42.10(pid=22819): Launched 01:14:41.231361 tst cs_paging_gprs_active.py:38: start network... 01:14:41.369528 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:14:41.889870 run create_hlr_db(pid=22820): Launched 01:14:42.080428 bus /gobi_6: Setting Powered False 01:14:43.100613 run create_hlr_db(pid=22820): Terminated: ok {rc=0} 01:14:43.514057 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22822): Launched 01:14:43.821689 run osmo-hlr_10.42.42.2(pid=22823): Launched 01:14:43.934837 run osmo-stp_10.42.42.5: Starting osmo-stp 01:14:44.467210 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22825): Launched 01:14:44.773516 run osmo-stp_10.42.42.5(pid=22826): Launched 01:14:44.885049 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:14:45.421276 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22828): Launched 01:14:45.530150 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:14:45.798941 run patchelf(pid=22829): Launched 01:14:46.000934 run osmo-stp_10.42.42.5(pid=22826): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22826)] 01:14:46.181734 run osmo-stp_10.42.42.5(pid=22826): stdout: | (launched: 2022-12-14_01:14:44.622814) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:46.317163 run osmo-stp_10.42.42.5(pid=22826): stderr: | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214011444794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:46.446448 run osmo-stp_10.42.42.5(pid=22826): stdout: | (launched: 2022-12-14_01:14:44.622814) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:46.574345 run osmo-stp_10.42.42.5(pid=22826): stderr: | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214011444794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214011444794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214011444795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:46.724016 run patchelf(pid=22829): Terminating (SIGINT) 01:14:46.899431 run patchelf(pid=22829): Terminated: ok {rc=0} 01:14:46.931994 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22826): Process ended prematurely: osmo-stp_10.42.42.5(pid=22826) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22826)] [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:14:46.941963 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:14:47.003344 run osmo-hlr_10.42.42.2(pid=22823): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22823)] 01:14:47.053341 run osmo-hlr_10.42.42.2(pid=22823): stdout: | (launched: 2022-12-14_01:14:43.669700) 01:14:47.104155 run osmo-hlr_10.42.42.2(pid=22823): stderr: | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214011443843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214011443867 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214011443876 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214011443877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214011443877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:14:47.147490 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22816): Terminating (SIGTERM) 01:14:47.189774 run iperf3-srv_10.42.42.10(pid=22817): Terminating (SIGTERM) 01:14:47.232144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22818): Terminating (SIGTERM) 01:14:47.273458 run iperf3-srv_10.42.42.10(pid=22819): Terminating (SIGTERM) 01:14:47.314009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22822): Terminating (SIGTERM) 01:14:47.353827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22825): Terminating (SIGTERM) 01:14:47.393341 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22828): Terminating (SIGTERM) 01:14:47.402526 --- ParallelTerminationStrategy: PID 22816 died... 01:14:47.456024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22816): Terminated: ok {rc=0} 01:14:47.465906 --- ParallelTerminationStrategy: PID 22817 died... 01:14:47.519238 run iperf3-srv_10.42.42.10(pid=22817): Terminated {rc=256} 01:14:47.528697 --- ParallelTerminationStrategy: PID 22818 died... 01:14:47.581869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22818): Terminated: ok {rc=0} 01:14:47.591331 --- ParallelTerminationStrategy: PID 22819 died... 01:14:47.644436 run iperf3-srv_10.42.42.10(pid=22819): Terminated {rc=256} 01:14:47.653987 --- ParallelTerminationStrategy: PID 22822 died... 01:14:47.707353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22822): Terminated: ok {rc=0} 01:14:47.716891 --- ParallelTerminationStrategy: PID 22825 died... 01:14:47.769991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22825): Terminated: ok {rc=0} 01:14:47.779915 --- ParallelTerminationStrategy: PID 22828 died... 01:14:47.833119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22828): Terminated: ok {rc=0} 01:14:47.922646 bus /gobi_0: Setting Powered False 01:14:49.026722 bus /gobi_0: Setting Powered False 01:14:50.138794 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22826): Process ended prematurely: osmo-stp_10.42.42.5(pid=22826) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22826)]