Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)

Failing for the past 260 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1658): Process ended prematurely: osmo-stp_10.42.42.5(pid=1658) [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1658)]

Standard Output

----------------------------------------------
trial-2398 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
03:12:00.785125 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:00.797491 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
03:12:00.957158 tst                        iperf3.py: using LAC 38145
03:12:01.087265 tst                        iperf3.py: using RAC 150
03:12:01.208824 tst                        iperf3.py: using CellId 38145
03:12:01.362691 tst                        iperf3.py: using BVCI 38146
03:12:01.393857 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.407133 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.419699 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.432309 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.445870 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.459613 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.472634 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.485452 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:12:01.498785 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
03:12:01.804024 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
03:12:01.934807 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
03:12:02.267005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1650): Launched
03:12:02.532777 run iperf3-srv_10.42.42.10(pid=1651): Launched
03:12:02.718674 tst                      iperf3.py:8: start network...
03:12:02.845537 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:12:03.335194 run          create_hlr_db(pid=1652): Launched
03:12:03.510776 bus                          /gobi_6: Setting Powered False
03:12:04.531598 run          create_hlr_db(pid=1652): Terminated: ok {rc=0}
03:12:04.935717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1654): Launched
03:12:05.240320 run    osmo-hlr_10.42.42.2(pid=1655): Launched
03:12:05.351178 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:12:05.880266 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1657): Launched
03:12:06.184892 run    osmo-stp_10.42.42.5(pid=1658): Launched
03:12:06.295576 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:12:06.825457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1660): Launched
03:12:06.933687 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:12:07.199694 run               patchelf(pid=1661): Launched
03:12:07.377511 run    osmo-stp_10.42.42.5(pid=1658): ERR: Terminated: ERROR {rc=1}  [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1658)]
03:12:07.507572 run    osmo-stp_10.42.42.5(pid=1658): stdout: 
| (launched: 2022-12-14_03:12:06.035275)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:12:07.638274 run    osmo-stp_10.42.42.5(pid=1658): stderr: 
| �[0;m�[38;5;43m20221214031206206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214031206206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214031206207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214031206207 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:12:07.763975 run    osmo-stp_10.42.42.5(pid=1658): stdout: 
| (launched: 2022-12-14_03:12:06.035275)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:12:07.889075 run    osmo-stp_10.42.42.5(pid=1658): stderr: 
| �[0;m�[38;5;43m20221214031206206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214031206206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214031206207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214031206207 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031206208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:12:08.035201 run               patchelf(pid=1661): Terminating (SIGINT)
03:12:08.207415 run               patchelf(pid=1661): Terminated: ok {rc=0}
03:12:08.239160 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1658): Process ended prematurely: osmo-stp_10.42.42.5(pid=1658) [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1658)]  [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
03:12:08.248453 tst                      iperf3.py:8: Test FAILED (7.5 sec)
03:12:08.308507 run    osmo-hlr_10.42.42.2(pid=1655): ERR: Terminated: ERROR {rc=237}  [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1655)]
03:12:08.357241 run    osmo-hlr_10.42.42.2(pid=1655): stdout: 
| (launched: 2022-12-14_03:12:05.090740) 
03:12:08.406705 run    osmo-hlr_10.42.42.2(pid=1655): stderr: 
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214031205266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214031205297 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214031205307 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214031205308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214031205308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:12:08.448858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1650): Terminating (SIGTERM)
03:12:08.488636 run iperf3-srv_10.42.42.10(pid=1651): Terminating (SIGTERM)
03:12:08.528257 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1654): Terminating (SIGTERM)
03:12:08.567688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1657): Terminating (SIGTERM)
03:12:08.607222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1660): Terminating (SIGTERM)
03:12:08.616474 ---      ParallelTerminationStrategy: PID 1650 died...
03:12:08.669906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1650): Terminated: ok {rc=0}
03:12:08.679581 ---      ParallelTerminationStrategy: PID 1651 died...
03:12:08.732309 run iperf3-srv_10.42.42.10(pid=1651): Terminated {rc=256}
03:12:08.741946 ---      ParallelTerminationStrategy: PID 1654 died...
03:12:08.794692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1654): Terminated: ok {rc=0}
03:12:08.804264 ---      ParallelTerminationStrategy: PID 1657 died...
03:12:08.856904 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1657): Terminated: ok {rc=0}
03:12:08.866550 ---      ParallelTerminationStrategy: PID 1660 died...
03:12:08.919280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1660): Terminated: ok {rc=0}
03:12:09.006607 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1658): Process ended prematurely: osmo-stp_10.42.42.5(pid=1658) [trial-2398↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1658)]