Skip to content

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 68 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28383): Process ended prematurely: osmo-stp_10.42.42.5(pid=28383) [trial-2398↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28383)]

Standard Output

----------------------------------------------
trial-2398 gprs:sysmo ping_idle_ping.py
----------------------------------------------
02:14:22.964852 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:22.976409 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
02:14:23.098858 tst                ping_idle_ping.py: using LAC 37837
02:14:23.220737 tst                ping_idle_ping.py: using RAC 97
02:14:23.335469 tst                ping_idle_ping.py: using CellId 37837
02:14:23.450441 tst                ping_idle_ping.py: using BVCI 37838
02:14:23.473190 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.483493 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.493823 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.503968 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.514050 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.524180 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.534473 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:23.544744 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
02:14:23.825536 tst             ping_idle_ping.py:24: start network...
02:14:23.948182 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:14:24.421283 run         create_hlr_db(pid=28377): Launched
02:14:24.590922 bus                          /gobi_6: Setting Powered False
02:14:25.611804 run         create_hlr_db(pid=28377): Terminated: ok {rc=0}
02:14:26.008409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28379): Launched
02:14:26.304868 run   osmo-hlr_10.42.42.2(pid=28380): Launched
02:14:26.412074 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:14:26.924228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28382): Launched
02:14:27.220059 run   osmo-stp_10.42.42.5(pid=28383): Launched
02:14:27.327513 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:14:27.844647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28385): Launched
02:14:27.949732 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:14:28.208468 run              patchelf(pid=28386): Launched
02:14:28.381322 run   osmo-stp_10.42.42.5(pid=28383): ERR: Terminated: ERROR {rc=1}  [trial-2398↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28383)]
02:14:28.507658 run   osmo-stp_10.42.42.5(pid=28383): stdout: 
| (launched: 2022-12-14_02:14:27.074045)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:28.634193 run   osmo-stp_10.42.42.5(pid=28383): stderr: 
| �[0;m�[38;5;43m20221214021427243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214021427244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214021427244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214021427244 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:28.756447 run   osmo-stp_10.42.42.5(pid=28383): stdout: 
| (launched: 2022-12-14_02:14:27.074045)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:28.877967 run   osmo-stp_10.42.42.5(pid=28383): stderr: 
| �[0;m�[38;5;43m20221214021427243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214021427244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214021427244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214021427244 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214021427245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:29.019585 run              patchelf(pid=28386): Terminating (SIGINT)
02:14:29.186830 run              patchelf(pid=28386): Terminated: ok {rc=0}
02:14:29.217242 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28383): Process ended prematurely: osmo-stp_10.42.42.5(pid=28383) [trial-2398↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28383)]  [trial-2398↪gprs:sysmo↪ping_idle_ping.py:27]
02:14:29.225654 tst             ping_idle_ping.py:27: Test FAILED (6.2 sec)
02:14:29.285056 run   osmo-hlr_10.42.42.2(pid=28380): ERR: Terminated: ERROR {rc=237}  [trial-2398↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28380)]
02:14:29.333384 run   osmo-hlr_10.42.42.2(pid=28380): stdout: 
| (launched: 2022-12-14_02:14:26.158596) 
02:14:29.382351 run   osmo-hlr_10.42.42.2(pid=28380): stderr: 
| �[0;m�[1;31m20221214021426333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214021426333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214021426333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214021426333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214021426334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214021426334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214021426355 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214021426365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214021426365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214021426365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:14:29.423913 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28379): Terminating (SIGTERM)
02:14:29.463032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28382): Terminating (SIGTERM)
02:14:29.502093 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28385): Terminating (SIGTERM)
02:14:29.511097 ---      ParallelTerminationStrategy: PID 28379 died...
02:14:29.563534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28379): Terminated: ok {rc=0}
02:14:29.572837 ---      ParallelTerminationStrategy: PID 28382 died...
02:14:29.625035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28382): Terminated: ok {rc=0}
02:14:29.634411 ---      ParallelTerminationStrategy: PID 28385 died...
02:14:29.686332 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28385): Terminated: ok {rc=0}
02:14:29.769536 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28383): Process ended prematurely: osmo-stp_10.42.42.5(pid=28383) [trial-2398↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28383)]