Skip to content

Failed

gprs:trx-lms+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)

Failing for the past 261 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8474): Process ended prematurely: osmo-stp_10.42.42.5(pid=8474) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8474)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-lms+mod-bts0-dynts-ipa ping.py
----------------------------------------------
04:25:59.079126 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.090854 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
04:25:59.245267 tst                          ping.py: using LAC 38533
04:25:59.362767 tst                          ping.py: using RAC 28
04:25:59.478638 tst                          ping.py: using CellId 38533
04:25:59.600058 tst                          ping.py: using BVCI 38534
04:25:59.622817 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.633689 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.644361 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.654988 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.665960 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.676784 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.687646 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:25:59.698480 tst  gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
04:25:59.970538 tst                       ping.py:19: start network...
04:26:00.092929 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:26:00.570319 run          create_hlr_db(pid=8468): Launched
04:26:00.756734 bus                          /gobi_6: Setting Powered False
04:26:01.832811 run          create_hlr_db(pid=8468): Terminated: ok {rc=0}
04:26:02.273986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8470): Launched
04:26:02.572047 run    osmo-hlr_10.42.42.2(pid=8471): Launched
04:26:02.683148 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:26:03.201827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8473): Launched
04:26:03.500769 run    osmo-stp_10.42.42.5(pid=8474): Launched
04:26:03.607613 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:26:04.127933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8476): Launched
04:26:04.232795 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:26:04.492662 run               patchelf(pid=8477): Launched
04:26:04.666337 run    osmo-stp_10.42.42.5(pid=8474): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8474)]
04:26:04.792751 run    osmo-stp_10.42.42.5(pid=8474): stdout: 
| (launched: 2022-12-14_04:26:03.351920)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:26:04.919658 run    osmo-stp_10.42.42.5(pid=8474): stderr: 
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214042603523 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:26:05.041986 run    osmo-stp_10.42.42.5(pid=8474): stdout: 
| (launched: 2022-12-14_04:26:03.351920)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:26:05.163155 run    osmo-stp_10.42.42.5(pid=8474): stderr: 
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214042603522 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214042603523 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214042603523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:26:05.304075 run               patchelf(pid=8477): Terminating (SIGINT)
04:26:05.469162 run               patchelf(pid=8477): Terminated: ok {rc=0}
04:26:05.499395 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8474): Process ended prematurely: osmo-stp_10.42.42.5(pid=8474) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8474)]  [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22]
04:26:05.508055 tst                       ping.py:22: Test FAILED (6.4 sec)
04:26:05.568324 run    osmo-hlr_10.42.42.2(pid=8471): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8471)]
04:26:05.617439 run    osmo-hlr_10.42.42.2(pid=8471): stdout: 
| (launched: 2022-12-14_04:26:02.425373) 
04:26:05.667129 run    osmo-hlr_10.42.42.2(pid=8471): stderr: 
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214042602601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214042602613 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214042602622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214042602622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214042602622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:26:05.709547 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8470): Terminating (SIGTERM)
04:26:05.749423 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8473): Terminating (SIGTERM)
04:26:05.789509 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8476): Terminating (SIGTERM)
04:26:05.798843 ---      ParallelTerminationStrategy: PID 8470 died...
04:26:05.852594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8470): Terminated: ok {rc=0}
04:26:05.862453 ---      ParallelTerminationStrategy: PID 8473 died...
04:26:05.915930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8473): Terminated: ok {rc=0}
04:26:05.925771 ---      ParallelTerminationStrategy: PID 8476 died...
04:26:05.978800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8476): Terminated: ok {rc=0}
04:26:06.067171 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8474): Process ended prematurely: osmo-stp_10.42.42.5(pid=8474) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8474)]