Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 261 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8920): Process ended prematurely: osmo-stp_10.42.42.5(pid=8920) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8920)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
04:32:22.453603 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:22.465718 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
04:32:22.601050 tst                        iperf3.py: using LAC 38568
04:32:22.720377 tst                        iperf3.py: using RAC 63
04:32:22.839590 tst                        iperf3.py: using CellId 38568
04:32:22.958968 tst                        iperf3.py: using BVCI 38569
04:32:22.981929 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:22.993236 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.004077 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.014944 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.025729 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.036439 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.047276 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.058011 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:32:23.068892 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
04:32:23.349111 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
04:32:23.473835 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:32:23.785053 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8912): Launched
04:32:24.042434 run iperf3-srv_10.42.42.10(pid=8913): Launched
04:32:24.224098 tst                      iperf3.py:8: start network...
04:32:24.348431 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:32:24.831174 run          create_hlr_db(pid=8914): Launched
04:32:25.002406 bus                          /gobi_6: Setting Powered False
04:32:26.024305 run          create_hlr_db(pid=8914): Terminated: ok {rc=0}
04:32:26.422358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8916): Launched
04:32:26.721643 run    osmo-hlr_10.42.42.2(pid=8917): Launched
04:32:26.830745 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:32:27.349798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8919): Launched
04:32:27.648334 run    osmo-stp_10.42.42.5(pid=8920): Launched
04:32:27.756268 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:32:28.275267 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8922): Launched
04:32:28.381066 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:32:28.641518 run               patchelf(pid=8923): Launched
04:32:28.816230 run    osmo-stp_10.42.42.5(pid=8920): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8920)]
04:32:28.944111 run    osmo-stp_10.42.42.5(pid=8920): stdout: 
| (launched: 2022-12-14_04:32:27.501527)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:32:29.072313 run    osmo-stp_10.42.42.5(pid=8920): stderr: 
| �[0;m�[38;5;43m20221214043227672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214043227672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214043227673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214043227673 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:32:29.196095 run    osmo-stp_10.42.42.5(pid=8920): stdout: 
| (launched: 2022-12-14_04:32:27.501527)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:32:29.318847 run    osmo-stp_10.42.42.5(pid=8920): stderr: 
| �[0;m�[38;5;43m20221214043227672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214043227672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214043227673 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214043227673 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214043227674 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:32:29.462489 run               patchelf(pid=8923): Terminating (SIGINT)
04:32:29.630241 run               patchelf(pid=8923): Terminated: ok {rc=0}
04:32:29.661104 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8920): Process ended prematurely: osmo-stp_10.42.42.5(pid=8920) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8920)]  [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
04:32:29.670402 tst                      iperf3.py:8: Test FAILED (7.3 sec)
04:32:29.729485 run    osmo-hlr_10.42.42.2(pid=8917): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8917)]
04:32:29.777799 run    osmo-hlr_10.42.42.2(pid=8917): stdout: 
| (launched: 2022-12-14_04:32:26.573903) 
04:32:29.826992 run    osmo-hlr_10.42.42.2(pid=8917): stderr: 
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214043226749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214043226766 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214043226775 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214043226776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214043226776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:32:29.869033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8912): Terminating (SIGTERM)
04:32:29.908079 run iperf3-srv_10.42.42.10(pid=8913): Terminating (SIGTERM)
04:32:29.947374 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8916): Terminating (SIGTERM)
04:32:29.986699 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8919): Terminating (SIGTERM)
04:32:30.026221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8922): Terminating (SIGTERM)
04:32:30.035378 ---      ParallelTerminationStrategy: PID 8912 died...
04:32:30.088355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8912): Terminated: ok {rc=0}
04:32:30.098020 ---      ParallelTerminationStrategy: PID 8913 died...
04:32:30.150484 run iperf3-srv_10.42.42.10(pid=8913): Terminated {rc=256}
04:32:30.159952 ---      ParallelTerminationStrategy: PID 8916 died...
04:32:30.212431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8916): Terminated: ok {rc=0}
04:32:30.222016 ---      ParallelTerminationStrategy: PID 8919 died...
04:32:30.274789 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8919): Terminated: ok {rc=0}
04:32:30.284415 ---      ParallelTerminationStrategy: PID 8922 died...
04:32:30.337223 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8922): Terminated: ok {rc=0}
04:32:30.425356 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8920): Process ended prematurely: osmo-stp_10.42.42.5(pid=8920) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8920)]