Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6629): Process ended prematurely: osmo-stp_10.42.42.5(pid=6629) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6629)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 04:07:10.038413 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.049621 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:07:10.187773 tst cs_paging_gprs_active.py: using LAC 38434 04:07:10.307285 tst cs_paging_gprs_active.py: using RAC 184 04:07:10.426676 tst cs_paging_gprs_active.py: using CellId 38434 04:07:10.543431 tst cs_paging_gprs_active.py: using BVCI 38435 04:07:10.566369 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.577206 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.587798 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.598498 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.609920 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.621233 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.632643 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.643904 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:07:10.655528 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:07:10.775792 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:07:11.051200 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:07:11.175082 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:07:11.482790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6619): Launched 04:07:11.738605 run iperf3-srv_10.42.42.10(pid=6620): Launched 04:07:11.919828 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:07:12.043061 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:07:12.351035 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6621): Launched 04:07:12.606473 run iperf3-srv_10.42.42.10(pid=6622): Launched 04:07:12.786806 tst cs_paging_gprs_active.py:38: start network... 04:07:12.910193 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:07:13.389022 run create_hlr_db(pid=6623): Launched 04:07:13.559529 bus /gobi_6: Setting Powered False 04:07:14.581865 run create_hlr_db(pid=6623): Terminated: ok {rc=0} 04:07:15.007582 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6625): Launched 04:07:15.328893 run osmo-hlr_10.42.42.2(pid=6626): Launched 04:07:15.449504 run osmo-stp_10.42.42.5: Starting osmo-stp 04:07:16.030619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6628): Launched 04:07:16.450076 run osmo-stp_10.42.42.5(pid=6629): Launched 04:07:16.644162 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:07:17.203321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6631): Launched 04:07:17.318479 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:07:17.599114 run patchelf(pid=6632): Launched 04:07:17.787379 run osmo-stp_10.42.42.5(pid=6629): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6629)] 04:07:17.924825 run osmo-stp_10.42.42.5(pid=6629): stdout: | (launched: 2022-12-14_04:07:16.196935) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:07:18.063221 run osmo-stp_10.42.42.5(pid=6629): stderr: | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040716473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:07:18.196438 run osmo-stp_10.42.42.5(pid=6629): stdout: | (launched: 2022-12-14_04:07:16.196935) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:07:18.328319 run osmo-stp_10.42.42.5(pid=6629): stderr: | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040716472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040716473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040716473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:07:18.481273 run patchelf(pid=6632): Terminating (SIGINT) 04:07:18.659854 run patchelf(pid=6632): Terminated: ok {rc=0} 04:07:18.692800 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6629): Process ended prematurely: osmo-stp_10.42.42.5(pid=6629) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6629)] [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 04:07:18.702863 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 04:07:18.766052 run osmo-hlr_10.42.42.2(pid=6626): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6626)] 04:07:18.817538 run osmo-hlr_10.42.42.2(pid=6626): stdout: | (launched: 2022-12-14_04:07:15.171360) 04:07:18.869887 run osmo-hlr_10.42.42.2(pid=6626): stderr: | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040715365 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040715377 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040715386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040715386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040715386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:07:18.914589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6619): Terminating (SIGTERM) 04:07:18.956487 run iperf3-srv_10.42.42.10(pid=6620): Terminating (SIGTERM) 04:07:18.998628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6621): Terminating (SIGTERM) 04:07:19.040786 run iperf3-srv_10.42.42.10(pid=6622): Terminating (SIGTERM) 04:07:19.084825 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6625): Terminating (SIGTERM) 04:07:19.126990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6628): Terminating (SIGTERM) 04:07:19.169194 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6631): Terminating (SIGTERM) 04:07:19.178788 --- ParallelTerminationStrategy: PID 6619 died... 04:07:19.235047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6619): Terminated: ok {rc=0} 04:07:19.244927 --- ParallelTerminationStrategy: PID 6620 died... 04:07:19.300835 run iperf3-srv_10.42.42.10(pid=6620): Terminated {rc=256} 04:07:19.310871 --- ParallelTerminationStrategy: PID 6621 died... 04:07:19.366928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6621): Terminated: ok {rc=0} 04:07:19.376831 --- ParallelTerminationStrategy: PID 6622 died... 04:07:19.432840 run iperf3-srv_10.42.42.10(pid=6622): Terminated {rc=256} 04:07:19.442939 --- ParallelTerminationStrategy: PID 6625 died... 04:07:19.499019 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6625): Terminated: ok {rc=0} 04:07:19.509076 --- ParallelTerminationStrategy: PID 6628 died... 04:07:19.565229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6628): Terminated: ok {rc=0} 04:07:19.575168 --- ParallelTerminationStrategy: PID 6631 died... 04:07:19.630865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6631): Terminated: ok {rc=0} 04:07:19.716087 bus /gobi_0: Setting Powered False 04:07:20.822449 bus /gobi_0: Setting Powered False 04:07:21.930617 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6629): Process ended prematurely: osmo-stp_10.42.42.5(pid=6629) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6629)]