Skip to content

Failed

gprs:trx-umtrx+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 261 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7526): Process ended prematurely: osmo-stp_10.42.42.5(pid=7526) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7526)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-umtrx+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
04:16:13.750315 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:13.762658 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
04:16:13.901609 tst                ping_idle_ping.py: using LAC 38482
04:16:14.019394 tst                ping_idle_ping.py: using RAC 232
04:16:14.138993 tst                ping_idle_ping.py: using CellId 38482
04:16:14.258155 tst                ping_idle_ping.py: using BVCI 38483
04:16:14.281118 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.291953 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.302575 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.313141 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.324167 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.335245 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.346644 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:16:14.357770 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
04:16:14.631441 tst             ping_idle_ping.py:24: start network...
04:16:14.754843 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:16:15.237456 run          create_hlr_db(pid=7520): Launched
04:16:15.409982 bus                          /gobi_6: Setting Powered False
04:16:16.448822 run          create_hlr_db(pid=7520): Terminated: ok {rc=0}
04:16:16.915378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7522): Launched
04:16:17.271711 run    osmo-hlr_10.42.42.2(pid=7523): Launched
04:16:17.387327 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:16:17.916998 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7525): Launched
04:16:18.216575 run    osmo-stp_10.42.42.5(pid=7526): Launched
04:16:18.324478 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:16:18.847389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7528): Launched
04:16:18.953326 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:16:19.214850 run               patchelf(pid=7529): Launched
04:16:19.390179 run    osmo-stp_10.42.42.5(pid=7526): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7526)]
04:16:19.518305 run    osmo-stp_10.42.42.5(pid=7526): stdout: 
| (launched: 2022-12-14_04:16:18.068276)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:16:19.646597 run    osmo-stp_10.42.42.5(pid=7526): stderr: 
| �[0;m�[38;5;43m20221214041618239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214041618240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214041618240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214041618240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:16:19.770923 run    osmo-stp_10.42.42.5(pid=7526): stdout: 
| (launched: 2022-12-14_04:16:18.068276)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:16:19.893297 run    osmo-stp_10.42.42.5(pid=7526): stderr: 
| �[0;m�[38;5;43m20221214041618239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214041618240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214041618240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214041618240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214041618241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:16:20.035573 run               patchelf(pid=7529): Terminating (SIGINT)
04:16:20.202758 run               patchelf(pid=7529): Terminated: ok {rc=0}
04:16:20.233356 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7526): Process ended prematurely: osmo-stp_10.42.42.5(pid=7526) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7526)]  [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27]
04:16:20.242114 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
04:16:20.301558 run    osmo-hlr_10.42.42.2(pid=7523): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7523)]
04:16:20.350312 run    osmo-hlr_10.42.42.2(pid=7523): stdout: 
| (launched: 2022-12-14_04:16:17.068832) 
04:16:20.399673 run    osmo-hlr_10.42.42.2(pid=7523): stderr: 
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214041617311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214041617323 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-umtrx+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214041617331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214041617331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214041617331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:16:20.441425 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7522): Terminating (SIGTERM)
04:16:20.480737 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7525): Terminating (SIGTERM)
04:16:20.520302 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7528): Terminating (SIGTERM)
04:16:20.529677 ---      ParallelTerminationStrategy: PID 7522 died...
04:16:20.583283 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7522): Terminated: ok {rc=0}
04:16:20.593014 ---      ParallelTerminationStrategy: PID 7525 died...
04:16:20.645988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7525): Terminated: ok {rc=0}
04:16:20.655657 ---      ParallelTerminationStrategy: PID 7528 died...
04:16:20.709026 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7528): Terminated: ok {rc=0}
04:16:20.797627 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7526): Process ended prematurely: osmo-stp_10.42.42.5(pid=7526) [trial-2399↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7526)]