Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13303): Process ended prematurely: osmo-stp_10.42.42.5(pid=13303) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13303)]
Standard Output
---------------------------------------------- trial-2400 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 05:44:22.375972 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:22.387049 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:44:22.535021 tst cs_paging_gprs_active.py: using LAC 38807 05:44:22.665553 tst cs_paging_gprs_active.py: using RAC 47 05:44:22.797617 tst cs_paging_gprs_active.py: using CellId 38807 05:44:22.931670 tst cs_paging_gprs_active.py: using BVCI 38808 05:44:22.957244 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:22.968648 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:22.979792 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:22.990930 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:23.002002 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:23.013203 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:23.024361 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:23.035406 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:23.046680 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:44:23.164886 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:44:23.466706 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:44:23.606792 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:23.953211 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13293): Launched 05:44:24.240817 run iperf3-srv_10.42.42.10(pid=13294): Launched 05:44:24.447325 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:44:24.587382 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:24.934148 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13295): Launched 05:44:25.221236 run iperf3-srv_10.42.42.10(pid=13296): Launched 05:44:25.427202 tst cs_paging_gprs_active.py:38: start network... 05:44:25.566904 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:44:26.099539 run create_hlr_db(pid=13297): Launched 05:44:26.291655 bus /gobi_6: Setting Powered False 05:44:27.313304 run create_hlr_db(pid=13297): Terminated: ok {rc=0} 05:44:27.734977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13299): Launched 05:44:28.050376 run osmo-hlr_10.42.42.2(pid=13300): Launched 05:44:28.174597 run osmo-stp_10.42.42.5: Starting osmo-stp 05:44:28.726658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13302): Launched 05:44:29.039852 run osmo-stp_10.42.42.5(pid=13303): Launched 05:44:29.154741 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:44:29.700034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13305): Launched 05:44:29.813656 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:44:30.086864 run patchelf(pid=13306): Launched 05:44:30.270210 run osmo-stp_10.42.42.5(pid=13303): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13303)] 05:44:30.405110 run osmo-stp_10.42.42.5(pid=13303): stdout: | (launched: 2022-12-14_05:44:28.885508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:30.540233 run osmo-stp_10.42.42.5(pid=13303): stderr: | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054429058 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:30.670054 run osmo-stp_10.42.42.5(pid=13303): stdout: | (launched: 2022-12-14_05:44:28.885508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:30.798714 run osmo-stp_10.42.42.5(pid=13303): stderr: | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054429057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054429058 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054429058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:30.975341 run patchelf(pid=13306): Terminating (SIGINT) 05:44:31.177484 run patchelf(pid=13306): Terminated: ok {rc=0} 05:44:31.213156 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13303): Process ended prematurely: osmo-stp_10.42.42.5(pid=13303) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13303)] [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 05:44:31.223586 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:44:31.288177 run osmo-hlr_10.42.42.2(pid=13300): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13300)] 05:44:31.341911 run osmo-hlr_10.42.42.2(pid=13300): stdout: | (launched: 2022-12-14_05:44:27.894593) 05:44:31.397183 run osmo-hlr_10.42.42.2(pid=13300): stderr: | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214054428072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214054428085 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214054428093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214054428093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214054428093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:44:31.443607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13293): Terminating (SIGTERM) 05:44:31.486846 run iperf3-srv_10.42.42.10(pid=13294): Terminating (SIGTERM) 05:44:31.530342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13295): Terminating (SIGTERM) 05:44:31.575550 run iperf3-srv_10.42.42.10(pid=13296): Terminating (SIGTERM) 05:44:31.619161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13299): Terminating (SIGTERM) 05:44:31.664869 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13302): Terminating (SIGTERM) 05:44:31.709930 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13305): Terminating (SIGTERM) 05:44:31.720706 --- ParallelTerminationStrategy: PID 13293 died... 05:44:31.781151 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13293): Terminated: ok {rc=0} 05:44:31.791830 --- ParallelTerminationStrategy: PID 13294 died... 05:44:31.848709 run iperf3-srv_10.42.42.10(pid=13294): Terminated {rc=256} 05:44:31.859163 --- ParallelTerminationStrategy: PID 13295 died... 05:44:31.916377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13295): Terminated: ok {rc=0} 05:44:31.926872 --- ParallelTerminationStrategy: PID 13296 died... 05:44:31.985413 run iperf3-srv_10.42.42.10(pid=13296): Terminated {rc=256} 05:44:31.995856 --- ParallelTerminationStrategy: PID 13299 died... 05:44:32.053093 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13299): Terminated: ok {rc=0} 05:44:32.063843 --- ParallelTerminationStrategy: PID 13302 died... 05:44:32.128761 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13302): Terminated: ok {rc=0} 05:44:32.140205 --- ParallelTerminationStrategy: PID 13305 died... 05:44:32.196161 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13305): Terminated: ok {rc=0} 05:44:32.286338 bus /gobi_0: Setting Powered False 05:44:33.390398 bus /gobi_0: Setting Powered False 05:44:34.499585 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13303): Process ended prematurely: osmo-stp_10.42.42.5(pid=13303) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13303)]