Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14441): Process ended prematurely: osmo-stp_10.42.42.5(pid=14441) [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14441)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 05:53:01.911146 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:01.923116 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:53:02.089961 tst cs_paging_gprs_active.py: using LAC 38853 05:53:02.232051 tst cs_paging_gprs_active.py: using RAC 93 05:53:02.364605 tst cs_paging_gprs_active.py: using CellId 38853 05:53:02.497765 tst cs_paging_gprs_active.py: using BVCI 38854 05:53:02.523792 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.535451 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.546941 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.558709 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.570489 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.582635 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.594561 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.606348 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:53:02.618759 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:53:02.738563 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:53:03.041878 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:53:03.182312 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:53:03.529147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14431): Launched 05:53:03.818145 run iperf3-srv_10.42.42.10(pid=14432): Launched 05:53:04.024484 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:53:04.164908 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:53:04.511366 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14433): Launched 05:53:04.798882 run iperf3-srv_10.42.42.10(pid=14434): Launched 05:53:05.004391 tst cs_paging_gprs_active.py:38: start network... 05:53:05.144344 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:53:05.680505 run create_hlr_db(pid=14435): Launched 05:53:05.874973 bus /gobi_6: Setting Powered False 05:53:06.894590 run create_hlr_db(pid=14435): Terminated: ok {rc=0} 05:53:07.315385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14437): Launched 05:53:07.631231 run osmo-hlr_10.42.42.2(pid=14438): Launched 05:53:07.753181 run osmo-stp_10.42.42.5: Starting osmo-stp 05:53:08.303735 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14440): Launched 05:53:08.619370 run osmo-stp_10.42.42.5(pid=14441): Launched 05:53:08.734695 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:53:09.282611 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14443): Launched 05:53:09.394744 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:53:09.669269 run patchelf(pid=14444): Launched 05:53:09.854053 run osmo-stp_10.42.42.5(pid=14441): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14441)] 05:53:09.989835 run osmo-stp_10.42.42.5(pid=14441): stdout: | (launched: 2022-12-14_05:53:08.463548) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:53:10.124813 run osmo-stp_10.42.42.5(pid=14441): stderr: | �[0;m�[38;5;43m20221214055308635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055308635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055308636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055308636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:53:10.255348 run osmo-stp_10.42.42.5(pid=14441): stdout: | (launched: 2022-12-14_05:53:08.463548) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:53:10.384005 run osmo-stp_10.42.42.5(pid=14441): stderr: | �[0;m�[38;5;43m20221214055308635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055308635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055308636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055308636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055308637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:53:10.534497 run patchelf(pid=14444): Terminating (SIGINT) 05:53:10.711138 run patchelf(pid=14444): Terminated: ok {rc=0} 05:53:10.743368 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14441): Process ended prematurely: osmo-stp_10.42.42.5(pid=14441) [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14441)] [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 05:53:10.752764 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:53:10.813092 run osmo-hlr_10.42.42.2(pid=14438): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14438)] 05:53:10.862447 run osmo-hlr_10.42.42.2(pid=14438): stdout: | (launched: 2022-12-14_05:53:07.475172) 05:53:10.912372 run osmo-hlr_10.42.42.2(pid=14438): stderr: | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214055307652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214055307665 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214055307673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214055307673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214055307673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:53:10.955291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14431): Terminating (SIGTERM) 05:53:10.995564 run iperf3-srv_10.42.42.10(pid=14432): Terminating (SIGTERM) 05:53:11.035904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14433): Terminating (SIGTERM) 05:53:11.076102 run iperf3-srv_10.42.42.10(pid=14434): Terminating (SIGTERM) 05:53:11.116381 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14437): Terminating (SIGTERM) 05:53:11.156658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14440): Terminating (SIGTERM) 05:53:11.196889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14443): Terminating (SIGTERM) 05:53:11.206154 --- ParallelTerminationStrategy: PID 14431 died... 05:53:11.260305 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14431): Terminated: ok {rc=0} 05:53:11.269811 --- ParallelTerminationStrategy: PID 14432 died... 05:53:11.323459 run iperf3-srv_10.42.42.10(pid=14432): Terminated {rc=256} 05:53:11.332935 --- ParallelTerminationStrategy: PID 14433 died... 05:53:11.386675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14433): Terminated: ok {rc=0} 05:53:11.396141 --- ParallelTerminationStrategy: PID 14434 died... 05:53:11.449661 run iperf3-srv_10.42.42.10(pid=14434): Terminated {rc=256} 05:53:11.459121 --- ParallelTerminationStrategy: PID 14437 died... 05:53:11.512426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14437): Terminated: ok {rc=0} 05:53:11.521990 --- ParallelTerminationStrategy: PID 14440 died... 05:53:11.576038 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14440): Terminated: ok {rc=0} 05:53:11.585689 --- ParallelTerminationStrategy: PID 14443 died... 05:53:11.639315 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14443): Terminated: ok {rc=0} 05:53:11.728283 bus /gobi_0: Setting Powered False 05:53:12.835394 bus /gobi_0: Setting Powered False 05:53:13.943192 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14441): Process ended prematurely: osmo-stp_10.42.42.5(pid=14441) [trial-2400↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14441)]