Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16829): Process ended prematurely: osmo-stp_10.42.42.5(pid=16829) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16829)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:19:27.812698 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:27.823554 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:19:28.005596 tst cs_paging_gprs_active.py: using LAC 38991 06:19:28.134704 tst cs_paging_gprs_active.py: using RAC 231 06:19:28.270545 tst cs_paging_gprs_active.py: using CellId 38991 06:19:28.401173 tst cs_paging_gprs_active.py: using BVCI 38992 06:19:28.426884 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.438303 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.449541 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.460714 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.471885 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.483220 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.494608 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.505785 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:19:28.517140 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:19:28.636909 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:19:28.937808 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:19:29.078179 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:19:29.425187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16819): Launched 06:19:29.713285 run iperf3-srv_10.42.42.10(pid=16820): Launched 06:19:29.918784 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:19:30.058409 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:19:30.406042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16821): Launched 06:19:30.693687 run iperf3-srv_10.42.42.10(pid=16822): Launched 06:19:30.909939 tst cs_paging_gprs_active.py:38: start network... 06:19:31.054023 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:19:31.631392 run create_hlr_db(pid=16823): Launched 06:19:31.829551 bus /gobi_6: Setting Powered False 06:19:32.836357 run create_hlr_db(pid=16823): Terminated: ok {rc=0} 06:19:33.298613 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16825): Launched 06:19:33.632719 run osmo-hlr_10.42.42.2(pid=16826): Launched 06:19:33.757572 run osmo-stp_10.42.42.5: Starting osmo-stp 06:19:34.336891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16828): Launched 06:19:34.670901 run osmo-stp_10.42.42.5(pid=16829): Launched 06:19:34.790936 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:19:35.373952 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16831): Launched 06:19:35.492910 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:19:35.791789 run patchelf(pid=16832): Launched 06:19:35.987385 run osmo-stp_10.42.42.5(pid=16829): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16829)] 06:19:36.129857 run osmo-stp_10.42.42.5(pid=16829): stdout: | (launched: 2022-12-14_06:19:34.507441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:19:36.272680 run osmo-stp_10.42.42.5(pid=16829): stderr: | �[0;m�[38;5;43m20221214061934702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061934702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061934703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061934703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061934703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061934704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061934704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:19:36.411127 run osmo-stp_10.42.42.5(pid=16829): stdout: | (launched: 2022-12-14_06:19:34.507441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:19:36.548561 run osmo-stp_10.42.42.5(pid=16829): stderr: | �[0;m�[38;5;43m20221214061934702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061934702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061934703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061934703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061934703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061934704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061934704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:19:36.707637 run patchelf(pid=16832): Terminating (SIGINT) 06:19:36.894971 run patchelf(pid=16832): Terminated: ok {rc=0} 06:19:36.929371 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16829): Process ended prematurely: osmo-stp_10.42.42.5(pid=16829) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16829)] [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:19:36.939390 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 06:19:37.002968 run osmo-hlr_10.42.42.2(pid=16826): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16826)] 06:19:37.054585 run osmo-hlr_10.42.42.2(pid=16826): stdout: | (launched: 2022-12-14_06:19:33.469112) 06:19:37.107095 run osmo-hlr_10.42.42.2(pid=16826): stderr: | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214061933669 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214061933681 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214061933692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214061933692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214061933692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:19:37.151888 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16819): Terminating (SIGTERM) 06:19:37.194099 run iperf3-srv_10.42.42.10(pid=16820): Terminating (SIGTERM) 06:19:37.236345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16821): Terminating (SIGTERM) 06:19:37.278799 run iperf3-srv_10.42.42.10(pid=16822): Terminating (SIGTERM) 06:19:37.321405 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16825): Terminating (SIGTERM) 06:19:37.363465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16828): Terminating (SIGTERM) 06:19:37.405504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16831): Terminating (SIGTERM) 06:19:37.415288 --- ParallelTerminationStrategy: PID 16819 died... 06:19:37.471597 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16819): Terminated: ok {rc=0} 06:19:37.482278 --- ParallelTerminationStrategy: PID 16820 died... 06:19:37.538244 run iperf3-srv_10.42.42.10(pid=16820): Terminated {rc=256} 06:19:37.548344 --- ParallelTerminationStrategy: PID 16821 died... 06:19:37.604359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16821): Terminated: ok {rc=0} 06:19:37.614542 --- ParallelTerminationStrategy: PID 16822 died... 06:19:37.670542 run iperf3-srv_10.42.42.10(pid=16822): Terminated {rc=256} 06:19:37.680757 --- ParallelTerminationStrategy: PID 16825 died... 06:19:37.736664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16825): Terminated: ok {rc=0} 06:19:37.746817 --- ParallelTerminationStrategy: PID 16828 died... 06:19:37.802739 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16828): Terminated: ok {rc=0} 06:19:37.812839 --- ParallelTerminationStrategy: PID 16831 died... 06:19:37.868770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16831): Terminated: ok {rc=0} 06:19:37.955333 bus /gobi_0: Setting Powered False 06:19:39.062505 bus /gobi_0: Setting Powered False 06:19:40.170292 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16829): Process ended prematurely: osmo-stp_10.42.42.5(pid=16829) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16829)]