Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16759): Process ended prematurely: osmo-stp_10.42.42.5(pid=16759) [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16759)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:18:26.807940 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:26.819509 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:18:26.966894 tst cs_paging_gprs_active.py: using LAC 38986 06:18:27.097761 tst cs_paging_gprs_active.py: using RAC 226 06:18:27.229270 tst cs_paging_gprs_active.py: using CellId 38986 06:18:27.362014 tst cs_paging_gprs_active.py: using BVCI 38987 06:18:27.387526 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.399009 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.410162 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.421452 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.432624 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.443959 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.455724 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.467212 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:18:27.479021 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:18:27.598047 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:18:27.884105 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:18:28.015657 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:18:28.342911 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16749): Launched 06:18:28.614342 run iperf3-srv_10.42.42.10(pid=16750): Launched 06:18:28.806002 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:18:28.936923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:18:29.263095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16751): Launched 06:18:29.534471 run iperf3-srv_10.42.42.10(pid=16752): Launched 06:18:29.726708 tst cs_paging_gprs_active.py:38: start network... 06:18:29.857634 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:18:30.352354 run create_hlr_db(pid=16753): Launched 06:18:30.531879 bus /gobi_6: Setting Powered False 06:18:31.577033 run create_hlr_db(pid=16753): Terminated: ok {rc=0} 06:18:32.071100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16755): Launched 06:18:32.410988 run osmo-hlr_10.42.42.2(pid=16756): Launched 06:18:32.532909 run osmo-stp_10.42.42.5: Starting osmo-stp 06:18:33.113861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16758): Launched 06:18:33.448572 run osmo-stp_10.42.42.5(pid=16759): Launched 06:18:33.570758 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:18:34.153893 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16761): Launched 06:18:34.273444 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:18:34.566311 run patchelf(pid=16762): Launched 06:18:34.763693 run osmo-stp_10.42.42.5(pid=16759): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16759)] 06:18:34.906911 run osmo-stp_10.42.42.5(pid=16759): stdout: | (launched: 2022-12-14_06:18:33.283810) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:18:35.050246 run osmo-stp_10.42.42.5(pid=16759): stderr: | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061833481 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:18:35.188649 run osmo-stp_10.42.42.5(pid=16759): stdout: | (launched: 2022-12-14_06:18:33.283810) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:18:35.326223 run osmo-stp_10.42.42.5(pid=16759): stderr: | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061833480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061833481 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061833481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:18:35.486020 run patchelf(pid=16762): Terminating (SIGINT) 06:18:35.673099 run patchelf(pid=16762): Terminated: ok {rc=0} 06:18:35.707752 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16759): Process ended prematurely: osmo-stp_10.42.42.5(pid=16759) [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16759)] [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:18:35.717869 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 06:18:35.781273 run osmo-hlr_10.42.42.2(pid=16756): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16756)] 06:18:35.833032 run osmo-hlr_10.42.42.2(pid=16756): stdout: | (launched: 2022-12-14_06:18:32.245316) 06:18:35.885329 run osmo-hlr_10.42.42.2(pid=16756): stderr: | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214061832445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214061832457 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214061832466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214061832466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214061832466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:18:35.930258 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16749): Terminating (SIGTERM) 06:18:35.972757 run iperf3-srv_10.42.42.10(pid=16750): Terminating (SIGTERM) 06:18:36.016525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16751): Terminating (SIGTERM) 06:18:36.058670 run iperf3-srv_10.42.42.10(pid=16752): Terminating (SIGTERM) 06:18:36.100779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16755): Terminating (SIGTERM) 06:18:36.143828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16758): Terminating (SIGTERM) 06:18:36.186115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16761): Terminating (SIGTERM) 06:18:36.195833 --- ParallelTerminationStrategy: PID 16749 died... 06:18:36.252312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16749): Terminated: ok {rc=0} 06:18:36.262594 --- ParallelTerminationStrategy: PID 16750 died... 06:18:36.318786 run iperf3-srv_10.42.42.10(pid=16750): Terminated {rc=256} 06:18:36.329170 --- ParallelTerminationStrategy: PID 16751 died... 06:18:36.385377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16751): Terminated: ok {rc=0} 06:18:36.395582 --- ParallelTerminationStrategy: PID 16752 died... 06:18:36.451589 run iperf3-srv_10.42.42.10(pid=16752): Terminated {rc=256} 06:18:36.461903 --- ParallelTerminationStrategy: PID 16755 died... 06:18:36.518036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16755): Terminated: ok {rc=0} 06:18:36.528428 --- ParallelTerminationStrategy: PID 16758 died... 06:18:36.584153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16758): Terminated: ok {rc=0} 06:18:36.594797 --- ParallelTerminationStrategy: PID 16761 died... 06:18:36.650916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16761): Terminated: ok {rc=0} 06:18:36.737896 bus /gobi_0: Setting Powered False 06:18:37.844366 bus /gobi_0: Setting Powered False 06:18:38.952807 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16759): Process ended prematurely: osmo-stp_10.42.42.5(pid=16759) [trial-2400↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16759)]