Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 263 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=25678): Process ended prematurely: osmo-stp_10.42.42.5(pid=25678) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25678)]

Standard Output

----------------------------------------------
trial-2401 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
07:55:01.577860 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:01.591541 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
07:55:01.741591 tst                        iperf3.py: using LAC 39490
07:55:01.892474 tst                        iperf3.py: using RAC 220
07:55:02.052022 tst                        iperf3.py: using CellId 39490
07:55:02.191630 tst                        iperf3.py: using BVCI 39491
07:55:02.217842 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.230549 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.243138 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.255697 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.270279 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.283565 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.297352 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.310098 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:55:02.322636 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
07:55:02.603581 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:55:02.730620 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:55:03.048794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25670): Launched
07:55:03.313122 run iperf3-srv_10.42.42.10(pid=25671): Launched
07:55:03.499369 tst                      iperf3.py:8: start network...
07:55:03.626204 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:55:04.119546 run         create_hlr_db(pid=25672): Launched
07:55:04.295432 bus                          /gobi_6: Setting Powered False
07:55:05.316339 run         create_hlr_db(pid=25672): Terminated: ok {rc=0}
07:55:05.753890 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25674): Launched
07:55:06.085796 run   osmo-hlr_10.42.42.2(pid=25675): Launched
07:55:06.208717 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:55:06.782248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25677): Launched
07:55:07.112286 run   osmo-stp_10.42.42.5(pid=25678): Launched
07:55:07.232939 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:55:07.808096 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25680): Launched
07:55:07.924756 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:55:08.212861 run              patchelf(pid=25681): Launched
07:55:08.404639 run   osmo-stp_10.42.42.5(pid=25678): ERR: Terminated: ERROR {rc=1}  [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25678)]
07:55:08.544552 run   osmo-stp_10.42.42.5(pid=25678): stdout: 
| (launched: 2022-12-14_07:55:06.948856)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:55:08.684807 run   osmo-stp_10.42.42.5(pid=25678): stderr: 
| �[0;m�[38;5;43m20221214075507142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214075507143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214075507143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214075507143 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:55:08.819895 run   osmo-stp_10.42.42.5(pid=25678): stdout: 
| (launched: 2022-12-14_07:55:06.948856)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:55:08.953673 run   osmo-stp_10.42.42.5(pid=25678): stderr: 
| �[0;m�[38;5;43m20221214075507142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214075507143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214075507143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214075507143 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214075507144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:55:09.110594 run              patchelf(pid=25681): Terminating (SIGINT)
07:55:09.295381 run              patchelf(pid=25681): Terminated: ok {rc=0}
07:55:09.329266 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25678): Process ended prematurely: osmo-stp_10.42.42.5(pid=25678) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25678)]  [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
07:55:09.339210 tst                      iperf3.py:8: Test FAILED (7.8 sec)
07:55:09.402616 run   osmo-hlr_10.42.42.2(pid=25675): ERR: Terminated: ERROR {rc=237}  [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25675)]
07:55:09.454155 run   osmo-hlr_10.42.42.2(pid=25675): stdout: 
| (launched: 2022-12-14_07:55:05.920870) 
07:55:09.506348 run   osmo-hlr_10.42.42.2(pid=25675): stderr: 
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214075506122 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214075506138 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214075506147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214075506147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214075506147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:55:09.550963 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25670): Terminating (SIGTERM)
07:55:09.593393 run iperf3-srv_10.42.42.10(pid=25671): Terminating (SIGTERM)
07:55:09.635278 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25674): Terminating (SIGTERM)
07:55:09.677111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25677): Terminating (SIGTERM)
07:55:09.718959 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25680): Terminating (SIGTERM)
07:55:09.728596 ---      ParallelTerminationStrategy: PID 25670 died...
07:55:09.784866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25670): Terminated: ok {rc=0}
07:55:09.794913 ---      ParallelTerminationStrategy: PID 25671 died...
07:55:09.850581 run iperf3-srv_10.42.42.10(pid=25671): Terminated {rc=256}
07:55:09.860487 ---      ParallelTerminationStrategy: PID 25674 died...
07:55:09.915949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25674): Terminated: ok {rc=0}
07:55:09.925907 ---      ParallelTerminationStrategy: PID 25677 died...
07:55:09.982024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25677): Terminated: ok {rc=0}
07:55:09.992077 ---      ParallelTerminationStrategy: PID 25680 died...
07:55:10.048227 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25680): Terminated: ok {rc=0}
07:55:10.134856 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25678): Process ended prematurely: osmo-stp_10.42.42.5(pid=25678) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25678)]