Skip to content

Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 263 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=23436): Process ended prematurely: osmo-stp_10.42.42.5(pid=23436) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23436)]

Standard Output

----------------------------------------------
trial-2401 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
07:38:34.451764 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:34.464082 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
07:38:34.610091 tst                          ping.py: using LAC 39403
07:38:34.731104 tst                          ping.py: using RAC 133
07:38:34.848838 tst                          ping.py: using CellId 39403
07:38:34.967391 tst                          ping.py: using BVCI 39404
07:38:34.990747 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.001917 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.012776 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.023517 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.034566 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.045262 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.056194 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:38:35.067100 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
07:38:35.363242 tst                       ping.py:19: start network...
07:38:35.499277 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:38:36.015931 run         create_hlr_db(pid=23430): Launched
07:38:36.206456 bus                          /gobi_6: Setting Powered False
07:38:37.225836 run         create_hlr_db(pid=23430): Terminated: ok {rc=0}
07:38:37.638981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23432): Launched
07:38:37.942759 run   osmo-hlr_10.42.42.2(pid=23433): Launched
07:38:38.059174 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:38:38.588926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23435): Launched
07:38:38.892080 run   osmo-stp_10.42.42.5(pid=23436): Launched
07:38:39.001121 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:38:39.529391 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23438): Launched
07:38:39.636686 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:38:39.901622 run              patchelf(pid=23439): Launched
07:38:40.079512 run   osmo-stp_10.42.42.5(pid=23436): ERR: Terminated: ERROR {rc=1}  [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23436)]
07:38:40.210003 run   osmo-stp_10.42.42.5(pid=23436): stdout: 
| (launched: 2022-12-14_07:38:38.742769)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:38:40.340032 run   osmo-stp_10.42.42.5(pid=23436): stderr: 
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214073838912 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:38:40.464822 run   osmo-stp_10.42.42.5(pid=23436): stdout: 
| (launched: 2022-12-14_07:38:38.742769)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:38:40.588449 run   osmo-stp_10.42.42.5(pid=23436): stderr: 
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214073838911 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214073838912 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214073838912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:38:40.734287 run              patchelf(pid=23439): Terminating (SIGINT)
07:38:40.905894 run              patchelf(pid=23439): Terminated: ok {rc=0}
07:38:40.936816 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23436): Process ended prematurely: osmo-stp_10.42.42.5(pid=23436) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23436)]  [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
07:38:40.945424 tst                       ping.py:22: Test FAILED (6.5 sec)
07:38:41.004979 run   osmo-hlr_10.42.42.2(pid=23433): ERR: Terminated: ERROR {rc=237}  [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23433)]
07:38:41.053593 run   osmo-hlr_10.42.42.2(pid=23433): stdout: 
| (launched: 2022-12-14_07:38:37.792878) 
07:38:41.102927 run   osmo-hlr_10.42.42.2(pid=23433): stderr: 
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214073837968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214073837980 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214073837988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214073837988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214073837989 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:38:41.145113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23432): Terminating (SIGTERM)
07:38:41.185016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23435): Terminating (SIGTERM)
07:38:41.224896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23438): Terminating (SIGTERM)
07:38:41.234337 ---      ParallelTerminationStrategy: PID 23432 died...
07:38:41.287474 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23432): Terminated: ok {rc=0}
07:38:41.297517 ---      ParallelTerminationStrategy: PID 23435 died...
07:38:41.350479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23435): Terminated: ok {rc=0}
07:38:41.360274 ---      ParallelTerminationStrategy: PID 23438 died...
07:38:41.413419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23438): Terminated: ok {rc=0}
07:38:41.496592 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23436): Process ended prematurely: osmo-stp_10.42.42.5(pid=23436) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23436)]