Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)

Failing for the past 260 builds (Since #2143 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28725): Process ended prematurely: osmo-stp_10.42.42.5(pid=28725) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28725)]

Standard Output

----------------------------------------------
trial-2402 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
08:34:27.573065 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:27.585188 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
08:34:27.742461 tst                        iperf3.py: using LAC 39693
08:34:27.872613 tst                        iperf3.py: using RAC 168
08:34:28.005126 tst                        iperf3.py: using CellId 39693
08:34:28.136388 tst                        iperf3.py: using BVCI 39694
08:34:28.162101 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.173601 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.184865 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.196210 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.207460 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.218839 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.230283 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.241527 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:34:28.253045 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
08:34:28.537103 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
08:34:28.667496 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:34:28.993058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28717): Launched
08:34:29.263939 run iperf3-srv_10.42.42.10(pid=28718): Launched
08:34:29.453414 tst                      iperf3.py:8: start network...
08:34:29.583230 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:34:30.085252 run         create_hlr_db(pid=28719): Launched
08:34:30.262779 bus                          /gobi_6: Setting Powered False
08:34:31.299982 run         create_hlr_db(pid=28719): Terminated: ok {rc=0}
08:34:31.761566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28721): Launched
08:34:32.155672 run   osmo-hlr_10.42.42.2(pid=28722): Launched
08:34:32.274279 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:34:32.818511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28724): Launched
08:34:33.131634 run   osmo-stp_10.42.42.5(pid=28725): Launched
08:34:33.246468 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:34:33.790515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28727): Launched
08:34:33.901554 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:34:34.173143 run              patchelf(pid=28728): Launched
08:34:34.354770 run   osmo-stp_10.42.42.5(pid=28725): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28725)]
08:34:34.487684 run   osmo-stp_10.42.42.5(pid=28725): stdout: 
| (launched: 2022-12-14_08:34:32.976529)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:34:34.620769 run   osmo-stp_10.42.42.5(pid=28725): stderr: 
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214083433150 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214083433152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214083433153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214083433153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:34:34.749537 run   osmo-stp_10.42.42.5(pid=28725): stdout: 
| (launched: 2022-12-14_08:34:32.976529)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:34:34.877120 run   osmo-stp_10.42.42.5(pid=28725): stderr: 
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214083433150 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214083433150 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214083433152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214083433153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214083433153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:34:35.025603 run              patchelf(pid=28728): Terminating (SIGINT)
08:34:35.199240 run              patchelf(pid=28728): Terminated: ok {rc=0}
08:34:35.231044 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28725): Process ended prematurely: osmo-stp_10.42.42.5(pid=28725) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28725)]  [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
08:34:35.240390 tst                      iperf3.py:8: Test FAILED (7.7 sec)
08:34:35.301214 run   osmo-hlr_10.42.42.2(pid=28722): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28722)]
08:34:35.350750 run   osmo-hlr_10.42.42.2(pid=28722): stdout: 
| (launched: 2022-12-14_08:34:31.934931) 
08:34:35.400933 run   osmo-hlr_10.42.42.2(pid=28722): stderr: 
| �[0;m�[1;31m20221214083432206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214083432206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214083432206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214083432206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214083432206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214083432207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214083432219 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214083432227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214083432227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214083432227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:34:35.443767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28717): Terminating (SIGTERM)
08:34:35.483988 run iperf3-srv_10.42.42.10(pid=28718): Terminating (SIGTERM)
08:34:35.524236 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28721): Terminating (SIGTERM)
08:34:35.564400 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28724): Terminating (SIGTERM)
08:34:35.604544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28727): Terminating (SIGTERM)
08:34:35.613861 ---      ParallelTerminationStrategy: PID 28717 died...
08:34:35.668479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28717): Terminated: ok {rc=0}
08:34:35.678276 ---      ParallelTerminationStrategy: PID 28718 died...
08:34:35.732198 run iperf3-srv_10.42.42.10(pid=28718): Terminated {rc=256}
08:34:35.741919 ---      ParallelTerminationStrategy: PID 28721 died...
08:34:35.795972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28721): Terminated: ok {rc=0}
08:34:35.805773 ---      ParallelTerminationStrategy: PID 28724 died...
08:34:35.859904 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28724): Terminated: ok {rc=0}
08:34:35.869612 ---      ParallelTerminationStrategy: PID 28727 died...
08:34:35.924282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28727): Terminated: ok {rc=0}
08:34:36.013078 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28725): Process ended prematurely: osmo-stp_10.42.42.5(pid=28725) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28725)]