Skip to content

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 217 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29975): Process ended prematurely: osmo-stp_10.42.42.5(pid=29975) [trial-2402↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29975)]

Standard Output

----------------------------------------------
trial-2402 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
08:48:34.168255 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.180380 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
08:48:34.320445 tst                ping_idle_ping.py: using LAC 39769
08:48:34.440053 tst                ping_idle_ping.py: using RAC 244
08:48:34.565496 tst                ping_idle_ping.py: using CellId 39769
08:48:34.694343 tst                ping_idle_ping.py: using BVCI 39770
08:48:34.719833 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.731098 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.742130 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.753260 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.764175 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.775075 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.786111 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:48:34.797107 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
08:48:35.087418 tst             ping_idle_ping.py:24: start network...
08:48:35.220722 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:48:35.737453 run         create_hlr_db(pid=29969): Launched
08:48:35.922283 bus                          /gobi_6: Setting Powered False
08:48:36.943818 run         create_hlr_db(pid=29969): Terminated: ok {rc=0}
08:48:37.348586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29971): Launched
08:48:37.647935 run   osmo-hlr_10.42.42.2(pid=29972): Launched
08:48:37.765591 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:48:38.293297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29974): Launched
08:48:38.593819 run   osmo-stp_10.42.42.5(pid=29975): Launched
08:48:38.702410 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:48:39.225149 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29977): Launched
08:48:39.331126 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:48:39.593782 run              patchelf(pid=29978): Launched
08:48:39.768691 run   osmo-stp_10.42.42.5(pid=29975): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29975)]
08:48:39.896461 run   osmo-stp_10.42.42.5(pid=29975): stdout: 
| (launched: 2022-12-14_08:48:38.444538)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:48:40.026082 run   osmo-stp_10.42.42.5(pid=29975): stderr: 
| �[0;m�[38;5;43m20221214084838614 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214084838614 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214084838615 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214084838615 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:48:40.150170 run   osmo-stp_10.42.42.5(pid=29975): stdout: 
| (launched: 2022-12-14_08:48:38.444538)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:48:40.273175 run   osmo-stp_10.42.42.5(pid=29975): stderr: 
| �[0;m�[38;5;43m20221214084838614 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214084838614 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214084838615 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214084838615 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214084838616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:48:40.415811 run              patchelf(pid=29978): Terminating (SIGINT)
08:48:40.582970 run              patchelf(pid=29978): Terminated: ok {rc=0}
08:48:40.613409 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29975): Process ended prematurely: osmo-stp_10.42.42.5(pid=29975) [trial-2402↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29975)]  [trial-2402↪gprs:trx-b200↪ping_idle_ping.py:27]
08:48:40.622230 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
08:48:40.682473 run   osmo-hlr_10.42.42.2(pid=29972): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29972)]
08:48:40.731606 run   osmo-hlr_10.42.42.2(pid=29972): stdout: 
| (launched: 2022-12-14_08:48:37.500134) 
08:48:40.781713 run   osmo-hlr_10.42.42.2(pid=29972): stderr: 
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214084837676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214084837688 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214084837697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214084837697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214084837697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:48:40.823913 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29971): Terminating (SIGTERM)
08:48:40.863536 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29974): Terminating (SIGTERM)
08:48:40.903191 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29977): Terminating (SIGTERM)
08:48:40.912318 ---      ParallelTerminationStrategy: PID 29971 died...
08:48:40.966149 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29971): Terminated: ok {rc=0}
08:48:40.975698 ---      ParallelTerminationStrategy: PID 29974 died...
08:48:41.029059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29974): Terminated: ok {rc=0}
08:48:41.038585 ---      ParallelTerminationStrategy: PID 29977 died...
08:48:41.091789 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29977): Terminated: ok {rc=0}
08:48:41.180054 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29975): Process ended prematurely: osmo-stp_10.42.42.5(pid=29975) [trial-2402↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29975)]