Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 264 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=31087): Process ended prematurely: osmo-stp_10.42.42.5(pid=31087) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31087)]

Standard Output

----------------------------------------------
trial-2402 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
08:59:51.329336 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.340875 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
08:59:51.503506 tst                        iperf3.py: using LAC 39828
08:59:51.624384 tst                        iperf3.py: using RAC 48
08:59:51.746366 tst                        iperf3.py: using CellId 39828
08:59:51.866914 tst                        iperf3.py: using BVCI 39829
08:59:51.890258 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.901470 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.912464 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.923460 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.934796 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.946062 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.957501 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.968607 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
08:59:51.980019 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
08:59:52.276569 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
08:59:52.413679 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:59:52.752828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31079): Launched
08:59:53.035448 run iperf3-srv_10.42.42.10(pid=31080): Launched
08:59:53.236119 tst                      iperf3.py:8: start network...
08:59:53.373183 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:59:53.896028 run         create_hlr_db(pid=31081): Launched
08:59:54.083189 bus                          /gobi_6: Setting Powered False
08:59:55.104477 run         create_hlr_db(pid=31081): Terminated: ok {rc=0}
08:59:55.514354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31083): Launched
08:59:55.820033 run   osmo-hlr_10.42.42.2(pid=31084): Launched
08:59:55.939569 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:59:56.480267 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31086): Launched
08:59:56.786205 run   osmo-stp_10.42.42.5(pid=31087): Launched
08:59:56.897162 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:59:57.430511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31089): Launched
08:59:57.539833 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:59:57.815411 run              patchelf(pid=31090): Launched
08:59:58.006173 run   osmo-stp_10.42.42.5(pid=31087): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31087)]
08:59:58.146013 run   osmo-stp_10.42.42.5(pid=31087): stdout: 
| (launched: 2022-12-14_08:59:56.635194)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:59:58.285787 run   osmo-stp_10.42.42.5(pid=31087): stderr: 
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214085956809 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:59:58.420831 run   osmo-stp_10.42.42.5(pid=31087): stdout: 
| (launched: 2022-12-14_08:59:56.635194)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:59:58.555110 run   osmo-stp_10.42.42.5(pid=31087): stderr: 
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214085956808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214085956809 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214085956809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:59:58.710653 run              patchelf(pid=31090): Terminating (SIGINT)
08:59:58.893494 run              patchelf(pid=31090): Terminated: ok {rc=0}
08:59:58.927298 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31087): Process ended prematurely: osmo-stp_10.42.42.5(pid=31087) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31087)]  [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
08:59:58.937613 tst                      iperf3.py:8: Test FAILED (7.6 sec)
08:59:59.001799 run   osmo-hlr_10.42.42.2(pid=31084): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31084)]
08:59:59.054475 run   osmo-hlr_10.42.42.2(pid=31084): stdout: 
| (launched: 2022-12-14_08:59:55.669237) 
08:59:59.107656 run   osmo-hlr_10.42.42.2(pid=31084): stderr: 
| �[0;m�[1;31m20221214085955845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214085955845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214085955845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214085955845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214085955845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214085955846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214085955858 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214085955867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214085955868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214085955868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:59:59.152836 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31079): Terminating (SIGTERM)
08:59:59.195289 run iperf3-srv_10.42.42.10(pid=31080): Terminating (SIGTERM)
08:59:59.237856 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31083): Terminating (SIGTERM)
08:59:59.280667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31086): Terminating (SIGTERM)
08:59:59.323312 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31089): Terminating (SIGTERM)
08:59:59.333066 ---      ParallelTerminationStrategy: PID 31079 died...
08:59:59.390103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31079): Terminated: ok {rc=0}
08:59:59.400335 ---      ParallelTerminationStrategy: PID 31080 died...
08:59:59.456924 run iperf3-srv_10.42.42.10(pid=31080): Terminated {rc=256}
08:59:59.467152 ---      ParallelTerminationStrategy: PID 31083 died...
08:59:59.523832 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31083): Terminated: ok {rc=0}
08:59:59.534161 ---      ParallelTerminationStrategy: PID 31086 died...
08:59:59.590442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31086): Terminated: ok {rc=0}
08:59:59.600681 ---      ParallelTerminationStrategy: PID 31089 died...
08:59:59.657076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31089): Terminated: ok {rc=0}
08:59:59.743834 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31087): Process ended prematurely: osmo-stp_10.42.42.5(pid=31087) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31087)]