Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 265 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=11030): Process ended prematurely: osmo-stp_10.42.42.5(pid=11030) [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11030)]

Standard Output

----------------------------------------------
trial-2403 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
10:58:27.503715 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:27.515426 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
10:58:27.666839 tst                        iperf3.py: using LAC 40455
10:58:27.787458 tst                        iperf3.py: using RAC 165
10:58:27.908800 tst                        iperf3.py: using CellId 40455
10:58:28.029453 tst                        iperf3.py: using BVCI 40456
10:58:28.052765 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.063832 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.074729 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.085521 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.096529 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.107797 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.119037 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.130103 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:58:28.141324 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
10:58:28.421159 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:58:28.548692 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:58:28.867019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11022): Launched
10:58:29.133120 run iperf3-srv_10.42.42.10(pid=11023): Launched
10:58:29.319433 tst                      iperf3.py:8: start network...
10:58:29.446387 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:58:29.926947 run         create_hlr_db(pid=11024): Launched
10:58:30.102276 bus                          /gobi_6: Setting Powered False
10:58:31.163306 run         create_hlr_db(pid=11024): Terminated: ok {rc=0}
10:58:31.622949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11026): Launched
10:58:32.068853 run   osmo-hlr_10.42.42.2(pid=11027): Launched
10:58:32.207262 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:58:32.738831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11029): Launched
10:58:33.047210 run   osmo-stp_10.42.42.5(pid=11030): Launched
10:58:33.158394 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:58:33.691388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11032): Launched
10:58:33.799705 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:58:34.068145 run              patchelf(pid=11033): Launched
10:58:34.247422 run   osmo-stp_10.42.42.5(pid=11030): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11030)]
10:58:34.378190 run   osmo-stp_10.42.42.5(pid=11030): stdout: 
| (launched: 2022-12-14_10:58:32.893604)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:58:34.508827 run   osmo-stp_10.42.42.5(pid=11030): stderr: 
| �[0;m�[38;5;43m20221214105833061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105833061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105833062 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105833062 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:58:34.634897 run   osmo-stp_10.42.42.5(pid=11030): stdout: 
| (launched: 2022-12-14_10:58:32.893604)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:58:34.759959 run   osmo-stp_10.42.42.5(pid=11030): stderr: 
| �[0;m�[38;5;43m20221214105833061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105833061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105833062 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105833062 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105833063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:58:34.906146 run              patchelf(pid=11033): Terminating (SIGINT)
10:58:35.078288 run              patchelf(pid=11033): Terminated: ok {rc=0}
10:58:35.110365 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11030): Process ended prematurely: osmo-stp_10.42.42.5(pid=11030) [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11030)]  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
10:58:35.119893 tst                      iperf3.py:8: Test FAILED (7.6 sec)
10:58:35.180454 run   osmo-hlr_10.42.42.2(pid=11027): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11027)]
10:58:35.229585 run   osmo-hlr_10.42.42.2(pid=11027): stdout: 
| (launched: 2022-12-14_10:58:31.795641) 
10:58:35.279402 run   osmo-hlr_10.42.42.2(pid=11027): stderr: 
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214105832067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214105832087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214105832105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214105832105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214105832105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:58:35.322254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11022): Terminating (SIGTERM)
10:58:35.362480 run iperf3-srv_10.42.42.10(pid=11023): Terminating (SIGTERM)
10:58:35.402665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11026): Terminating (SIGTERM)
10:58:35.443146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11029): Terminating (SIGTERM)
10:58:35.483222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11032): Terminating (SIGTERM)
10:58:35.492446 ---      ParallelTerminationStrategy: PID 11022 died...
10:58:35.546439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11022): Terminated: ok {rc=0}
10:58:35.555980 ---      ParallelTerminationStrategy: PID 11023 died...
10:58:35.609295 run iperf3-srv_10.42.42.10(pid=11023): Terminated {rc=256}
10:58:35.618814 ---      ParallelTerminationStrategy: PID 11026 died...
10:58:35.671996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11026): Terminated: ok {rc=0}
10:58:35.681613 ---      ParallelTerminationStrategy: PID 11029 died...
10:58:35.734928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11029): Terminated: ok {rc=0}
10:58:35.744522 ---      ParallelTerminationStrategy: PID 11032 died...
10:58:35.797919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11032): Terminated: ok {rc=0}
10:58:35.886105 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11030): Process ended prematurely: osmo-stp_10.42.42.5(pid=11030) [trial-2403↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11030)]