Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 265 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7507): Process ended prematurely: osmo-stp_10.42.42.5(pid=7507) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7507)]

Standard Output

----------------------------------------------
trial-2403 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py
----------------------------------------------
10:19:47.720670 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:47.733189 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:19:47.881602 tst                          ping.py: using LAC 40249
10:19:48.009384 tst                          ping.py: using RAC 214
10:19:48.137242 tst                          ping.py: using CellId 40249
10:19:48.263175 tst                          ping.py: using BVCI 40250
10:19:48.287883 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.299841 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.311440 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.323106 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.334705 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.346459 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.358178 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:19:48.369787 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:19:48.662247 tst                       ping.py:19: start network...
10:19:48.796081 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:19:49.311385 run          create_hlr_db(pid=7501): Launched
10:19:49.499091 bus                          /gobi_6: Setting Powered False
10:19:50.514582 run          create_hlr_db(pid=7501): Terminated: ok {rc=0}
10:19:50.912326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7503): Launched
10:19:51.203816 run    osmo-hlr_10.42.42.2(pid=7504): Launched
10:19:51.315795 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:19:51.833641 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7506): Launched
10:19:52.126795 run    osmo-stp_10.42.42.5(pid=7507): Launched
10:19:52.232512 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:19:52.743814 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7509): Launched
10:19:52.848266 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:19:53.106139 run               patchelf(pid=7510): Launched
10:19:53.278497 run    osmo-stp_10.42.42.5(pid=7507): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7507)]
10:19:53.405395 run    osmo-stp_10.42.42.5(pid=7507): stdout: 
| (launched: 2022-12-14_10:19:51.981912)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:19:53.531937 run    osmo-stp_10.42.42.5(pid=7507): stderr: 
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214101952148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:19:53.653621 run    osmo-stp_10.42.42.5(pid=7507): stdout: 
| (launched: 2022-12-14_10:19:51.981912)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:19:53.774135 run    osmo-stp_10.42.42.5(pid=7507): stderr: 
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214101952147 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214101952148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214101952148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:19:53.914717 run               patchelf(pid=7510): Terminating (SIGINT)
10:19:54.081061 run               patchelf(pid=7510): Terminated: ok {rc=0}
10:19:54.111558 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7507): Process ended prematurely: osmo-stp_10.42.42.5(pid=7507) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7507)]  [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22]
10:19:54.120387 tst                       ping.py:22: Test FAILED (6.4 sec)
10:19:54.180660 run    osmo-hlr_10.42.42.2(pid=7504): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7504)]
10:19:54.229949 run    osmo-hlr_10.42.42.2(pid=7504): stdout: 
| (launched: 2022-12-14_10:19:51.060147) 
10:19:54.279684 run    osmo-hlr_10.42.42.2(pid=7504): stderr: 
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214101951233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214101951247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214101951257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214101951257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214101951257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:19:54.322407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7503): Terminating (SIGTERM)
10:19:54.362653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7506): Terminating (SIGTERM)
10:19:54.402766 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7509): Terminating (SIGTERM)
10:19:54.411937 ---      ParallelTerminationStrategy: PID 7503 died...
10:19:54.465953 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7503): Terminated: ok {rc=0}
10:19:54.475573 ---      ParallelTerminationStrategy: PID 7506 died...
10:19:54.529120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7506): Terminated: ok {rc=0}
10:19:54.538616 ---      ParallelTerminationStrategy: PID 7509 died...
10:19:54.592076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7509): Terminated: ok {rc=0}
10:19:54.680852 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7507): Process ended prematurely: osmo-stp_10.42.42.5(pid=7507) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7507)]