Skip to content

Failed

gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)

Failing for the past 265 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10249): Process ended prematurely: osmo-stp_10.42.42.5(pid=10249) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10249)]

Standard Output

----------------------------------------------
trial-2403 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
10:51:13.860413 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:13.872567 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
10:51:14.037064 tst                        iperf3.py: using LAC 40417
10:51:14.164845 tst                        iperf3.py: using RAC 127
10:51:14.287016 tst                        iperf3.py: using CellId 40417
10:51:14.408118 tst                        iperf3.py: using BVCI 40418
10:51:14.431415 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.442698 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.453935 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.465090 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.476183 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.487390 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.498729 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.509768 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:51:14.521129 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
10:51:14.801412 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:51:14.928016 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:51:15.246083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10241): Launched
10:51:15.509981 run iperf3-srv_10.42.42.10(pid=10242): Launched
10:51:15.695253 tst                      iperf3.py:8: start network...
10:51:15.822460 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:51:16.382269 run         create_hlr_db(pid=10243): Launched
10:51:16.581458 bus                          /gobi_6: Setting Powered False
10:51:17.590910 run         create_hlr_db(pid=10243): Terminated: ok {rc=0}
10:51:18.031379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10245): Launched
10:51:18.359067 run   osmo-hlr_10.42.42.2(pid=10246): Launched
10:51:18.476759 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:51:19.047213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10248): Launched
10:51:19.372142 run   osmo-stp_10.42.42.5(pid=10249): Launched
10:51:19.487913 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:51:20.055689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10251): Launched
10:51:20.170877 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:51:20.456543 run              patchelf(pid=10252): Launched
10:51:20.646433 run   osmo-stp_10.42.42.5(pid=10249): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10249)]
10:51:20.784764 run   osmo-stp_10.42.42.5(pid=10249): stdout: 
| (launched: 2022-12-14_10:51:19.211120)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:51:20.923159 run   osmo-stp_10.42.42.5(pid=10249): stderr: 
| �[0;m�[38;5;43m20221214105119401 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105119401 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105119402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105119402 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:51:21.056817 run   osmo-stp_10.42.42.5(pid=10249): stdout: 
| (launched: 2022-12-14_10:51:19.211120)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:51:21.189030 run   osmo-stp_10.42.42.5(pid=10249): stderr: 
| �[0;m�[38;5;43m20221214105119401 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105119401 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105119402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105119402 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105119403 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:51:21.344174 run              patchelf(pid=10252): Terminating (SIGINT)
10:51:21.526732 run              patchelf(pid=10252): Terminated: ok {rc=0}
10:51:21.560232 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10249): Process ended prematurely: osmo-stp_10.42.42.5(pid=10249) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10249)]  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8]
10:51:21.570390 tst                      iperf3.py:8: Test FAILED (7.7 sec)
10:51:21.634072 run   osmo-hlr_10.42.42.2(pid=10246): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10246)]
10:51:21.685765 run   osmo-hlr_10.42.42.2(pid=10246): stdout: 
| (launched: 2022-12-14_10:51:18.197059) 
10:51:21.738183 run   osmo-hlr_10.42.42.2(pid=10246): stderr: 
| �[0;m�[1;31m20221214105118395 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214105118395 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214105118395 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214105118395 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214105118396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214105118396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214105118411 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214105118420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214105118421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214105118421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:51:21.782781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10241): Terminating (SIGTERM)
10:51:21.824706 run iperf3-srv_10.42.42.10(pid=10242): Terminating (SIGTERM)
10:51:21.868028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10245): Terminating (SIGTERM)
10:51:21.910262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10248): Terminating (SIGTERM)
10:51:21.952116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10251): Terminating (SIGTERM)
10:51:21.961858 ---      ParallelTerminationStrategy: PID 10241 died...
10:51:22.018003 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10241): Terminated: ok {rc=0}
10:51:22.028103 ---      ParallelTerminationStrategy: PID 10242 died...
10:51:22.084037 run iperf3-srv_10.42.42.10(pid=10242): Terminated {rc=256}
10:51:22.094234 ---      ParallelTerminationStrategy: PID 10245 died...
10:51:22.150164 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10245): Terminated: ok {rc=0}
10:51:22.160184 ---      ParallelTerminationStrategy: PID 10248 died...
10:51:22.216066 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10248): Terminated: ok {rc=0}
10:51:22.226115 ---      ParallelTerminationStrategy: PID 10251 died...
10:51:22.281949 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10251): Terminated: ok {rc=0}
10:51:22.370279 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10249): Process ended prematurely: osmo-stp_10.42.42.5(pid=10249) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10249)]