Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 265 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10179): Process ended prematurely: osmo-stp_10.42.42.5(pid=10179) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10179)]

Standard Output

----------------------------------------------
trial-2403 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
10:50:13.279024 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.291446 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:50:13.434907 tst                        iperf3.py: using LAC 40412
10:50:13.561047 tst                        iperf3.py: using RAC 122
10:50:13.688475 tst                        iperf3.py: using CellId 40412
10:50:13.818188 tst                        iperf3.py: using BVCI 40413
10:50:13.842949 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.854444 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.865816 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.877143 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.888302 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.899614 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.911150 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.922322 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:50:13.933666 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:50:14.227601 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:50:14.363191 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:50:14.698954 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10171): Launched
10:50:14.978883 run iperf3-srv_10.42.42.10(pid=10172): Launched
10:50:15.177132 tst                      iperf3.py:8: start network...
10:50:15.312636 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:50:15.834008 run         create_hlr_db(pid=10173): Launched
10:50:16.029241 bus                          /gobi_6: Setting Powered False
10:50:17.055030 run         create_hlr_db(pid=10173): Terminated: ok {rc=0}
10:50:17.493302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10175): Launched
10:50:17.819523 run   osmo-hlr_10.42.42.2(pid=10176): Launched
10:50:17.937386 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:50:18.499197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10178): Launched
10:50:18.822159 run   osmo-stp_10.42.42.5(pid=10179): Launched
10:50:18.938094 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:50:19.502812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10181): Launched
10:50:19.617434 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:50:19.900835 run              patchelf(pid=10182): Launched
10:50:20.089486 run   osmo-stp_10.42.42.5(pid=10179): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10179)]
10:50:20.227187 run   osmo-stp_10.42.42.5(pid=10179): stdout: 
| (launched: 2022-12-14_10:50:18.662808)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:50:20.366314 run   osmo-stp_10.42.42.5(pid=10179): stderr: 
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105018853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105018853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105018853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105018854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:50:20.499217 run   osmo-stp_10.42.42.5(pid=10179): stdout: 
| (launched: 2022-12-14_10:50:18.662808)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:50:20.631176 run   osmo-stp_10.42.42.5(pid=10179): stderr: 
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214105018852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214105018853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105018853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105018853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105018854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:50:20.784773 run              patchelf(pid=10182): Terminating (SIGINT)
10:50:20.965755 run              patchelf(pid=10182): Terminated: ok {rc=0}
10:50:20.999003 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10179): Process ended prematurely: osmo-stp_10.42.42.5(pid=10179) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10179)]  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
10:50:21.009003 tst                      iperf3.py:8: Test FAILED (7.8 sec)
10:50:21.072163 run   osmo-hlr_10.42.42.2(pid=10176): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10176)]
10:50:21.124048 run   osmo-hlr_10.42.42.2(pid=10176): stdout: 
| (launched: 2022-12-14_10:50:17.658549) 
10:50:21.176281 run   osmo-hlr_10.42.42.2(pid=10176): stderr: 
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214105017853 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214105017866 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214105017874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214105017875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214105017875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:50:21.220513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10171): Terminating (SIGTERM)
10:50:21.262406 run iperf3-srv_10.42.42.10(pid=10172): Terminating (SIGTERM)
10:50:21.304245 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10175): Terminating (SIGTERM)
10:50:21.346362 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10178): Terminating (SIGTERM)
10:50:21.388761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10181): Terminating (SIGTERM)
10:50:21.398536 ---      ParallelTerminationStrategy: PID 10171 died...
10:50:21.454306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10171): Terminated: ok {rc=0}
10:50:21.464301 ---      ParallelTerminationStrategy: PID 10172 died...
10:50:21.519827 run iperf3-srv_10.42.42.10(pid=10172): Terminated {rc=256}
10:50:21.529825 ---      ParallelTerminationStrategy: PID 10175 died...
10:50:21.585461 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10175): Terminated: ok {rc=0}
10:50:21.595463 ---      ParallelTerminationStrategy: PID 10178 died...
10:50:21.650606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10178): Terminated: ok {rc=0}
10:50:21.660616 ---      ParallelTerminationStrategy: PID 10181 died...
10:50:21.716054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10181): Terminated: ok {rc=0}
10:50:21.802694 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10179): Process ended prematurely: osmo-stp_10.42.42.5(pid=10179) [trial-2403↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10179)]