Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)

Failing for the past 266 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18041): Process ended prematurely: osmo-stp_10.42.42.5(pid=18041) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18041)]

Standard Output

----------------------------------------------
trial-2404 gprs:trx-b200+mod-bts0-egprs iperf3.py
----------------------------------------------
11:49:26.692686 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:26.704597 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
11:49:26.854192 tst                        iperf3.py: using LAC 40693
11:49:26.982925 tst                        iperf3.py: using RAC 148
11:49:27.111461 tst                        iperf3.py: using CellId 40693
11:49:27.241260 tst                        iperf3.py: using BVCI 40694
11:49:27.266444 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.277822 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.288791 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.299790 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.310961 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.321952 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.333191 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.344112 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:49:27.355410 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
11:49:27.652637 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
11:49:27.789398 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:49:28.128767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18033): Launched
11:49:28.411472 run iperf3-srv_10.42.42.10(pid=18034): Launched
11:49:28.611051 tst                      iperf3.py:8: start network...
11:49:28.747084 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:49:29.269502 run         create_hlr_db(pid=18035): Launched
11:49:29.457551 bus                          /gobi_6: Setting Powered False
11:49:30.478033 run         create_hlr_db(pid=18035): Terminated: ok {rc=0}
11:49:30.923578 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18037): Launched
11:49:31.377523 run   osmo-hlr_10.42.42.2(pid=18038): Launched
11:49:31.620768 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:49:32.177132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18040): Launched
11:49:32.507450 run   osmo-stp_10.42.42.5(pid=18041): Launched
11:49:32.625754 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:49:33.197129 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18043): Launched
11:49:33.313552 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:49:33.599470 run              patchelf(pid=18044): Launched
11:49:33.790454 run   osmo-stp_10.42.42.5(pid=18041): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18041)]
11:49:33.930267 run   osmo-stp_10.42.42.5(pid=18041): stdout: 
| (launched: 2022-12-14_11:49:32.345527)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:49:34.070667 run   osmo-stp_10.42.42.5(pid=18041): stderr: 
| �[0;m�[38;5;43m20221214114932535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214114932535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214114932536 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214114932536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214114932536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214114932537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214114932537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:49:34.206091 run   osmo-stp_10.42.42.5(pid=18041): stdout: 
| (launched: 2022-12-14_11:49:32.345527)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:49:34.339986 run   osmo-stp_10.42.42.5(pid=18041): stderr: 
| �[0;m�[38;5;43m20221214114932535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214114932535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214114932536 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214114932536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214114932536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214114932537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214114932537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:49:34.495731 run              patchelf(pid=18044): Terminating (SIGINT)
11:49:34.678985 run              patchelf(pid=18044): Terminated: ok {rc=0}
11:49:34.712404 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18041): Process ended prematurely: osmo-stp_10.42.42.5(pid=18041) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18041)]  [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8]
11:49:34.722356 tst                      iperf3.py:8: Test FAILED (8.1 sec)
11:49:34.784986 run   osmo-hlr_10.42.42.2(pid=18038): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18038)]
11:49:34.836257 run   osmo-hlr_10.42.42.2(pid=18038): stdout: 
| (launched: 2022-12-14_11:49:31.103012) 
11:49:34.888153 run   osmo-hlr_10.42.42.2(pid=18038): stderr: 
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214114931343 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214114931392 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214114931400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214114931400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214114931400 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:49:34.932362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18033): Terminating (SIGTERM)
11:49:34.974523 run iperf3-srv_10.42.42.10(pid=18034): Terminating (SIGTERM)
11:49:35.016108 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18037): Terminating (SIGTERM)
11:49:35.058324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18040): Terminating (SIGTERM)
11:49:35.100300 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18043): Terminating (SIGTERM)
11:49:35.109887 ---      ParallelTerminationStrategy: PID 18033 died...
11:49:35.165708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18033): Terminated: ok {rc=0}
11:49:35.175620 ---      ParallelTerminationStrategy: PID 18034 died...
11:49:35.230688 run iperf3-srv_10.42.42.10(pid=18034): Terminated {rc=256}
11:49:35.240665 ---      ParallelTerminationStrategy: PID 18037 died...
11:49:35.295927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18037): Terminated: ok {rc=0}
11:49:35.305928 ---      ParallelTerminationStrategy: PID 18040 died...
11:49:35.361136 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18040): Terminated: ok {rc=0}
11:49:35.371085 ---      ParallelTerminationStrategy: PID 18043 died...
11:49:35.426369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18043): Terminated: ok {rc=0}
11:49:35.513506 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18041): Process ended prematurely: osmo-stp_10.42.42.5(pid=18041) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18041)]