Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)

Failing for the past 267 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30301): Process ended prematurely: osmo-stp_10.42.42.5(pid=30301) [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30301)]

Standard Output

----------------------------------------------
trial-2405 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
13:57:50.208252 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.219759 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
13:57:50.354958 tst                        iperf3.py: using LAC 41372
13:57:50.471667 tst                        iperf3.py: using RAC 62
13:57:50.597317 tst                        iperf3.py: using CellId 41372
13:57:50.722825 tst                        iperf3.py: using BVCI 41373
13:57:50.747656 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.759177 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.770565 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.781805 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.793176 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.804440 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.815974 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.827443 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:57:50.839029 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
13:57:51.117068 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:57:51.243253 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:57:51.556611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30293): Launched
13:57:51.817096 run iperf3-srv_10.42.42.10(pid=30294): Launched
13:57:52.001587 tst                      iperf3.py:8: start network...
13:57:52.127215 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:57:52.611319 run         create_hlr_db(pid=30295): Launched
13:57:52.786004 bus                          /gobi_6: Setting Powered False
13:57:53.807388 run         create_hlr_db(pid=30295): Terminated: ok {rc=0}
13:57:54.209261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30297): Launched
13:57:54.511535 run   osmo-hlr_10.42.42.2(pid=30298): Launched
13:57:54.621968 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:57:55.148426 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30300): Launched
13:57:55.450788 run   osmo-stp_10.42.42.5(pid=30301): Launched
13:57:55.560204 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:57:56.084865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30303): Launched
13:57:56.191941 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:57:56.454782 run              patchelf(pid=30304): Launched
13:57:56.631438 run   osmo-stp_10.42.42.5(pid=30301): ERR: Terminated: ERROR {rc=1}  [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30301)]
13:57:56.761713 run   osmo-stp_10.42.42.5(pid=30301): stdout: 
| (launched: 2022-12-14_13:57:55.302213)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:57:56.891738 run   osmo-stp_10.42.42.5(pid=30301): stderr: 
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214135755474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:57:57.017436 run   osmo-stp_10.42.42.5(pid=30301): stdout: 
| (launched: 2022-12-14_13:57:55.302213)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:57:57.141781 run   osmo-stp_10.42.42.5(pid=30301): stderr: 
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214135755473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214135755474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214135755476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:57:57.286056 run              patchelf(pid=30304): Terminating (SIGINT)
13:57:57.455320 run              patchelf(pid=30304): Terminated: ok {rc=0}
13:57:57.486466 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30301): Process ended prematurely: osmo-stp_10.42.42.5(pid=30301) [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30301)]  [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
13:57:57.495677 tst                      iperf3.py:8: Test FAILED (7.3 sec)
13:57:57.555106 run   osmo-hlr_10.42.42.2(pid=30298): ERR: Terminated: ERROR {rc=237}  [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30298)]
13:57:57.603514 run   osmo-hlr_10.42.42.2(pid=30298): stdout: 
| (launched: 2022-12-14_13:57:54.363036) 
13:57:57.652727 run   osmo-hlr_10.42.42.2(pid=30298): stderr: 
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214135754539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214135754555 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214135754565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214135754565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214135754565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:57:57.694368 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30293): Terminating (SIGTERM)
13:57:57.734172 run iperf3-srv_10.42.42.10(pid=30294): Terminating (SIGTERM)
13:57:57.773660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30297): Terminating (SIGTERM)
13:57:57.812928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30300): Terminating (SIGTERM)
13:57:57.852301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30303): Terminating (SIGTERM)
13:57:57.861614 ---      ParallelTerminationStrategy: PID 30293 died...
13:57:57.914363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30293): Terminated: ok {rc=0}
13:57:57.923906 ---      ParallelTerminationStrategy: PID 30294 died...
13:57:57.976435 run iperf3-srv_10.42.42.10(pid=30294): Terminated {rc=256}
13:57:57.985925 ---      ParallelTerminationStrategy: PID 30297 died...
13:57:58.038518 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30297): Terminated: ok {rc=0}
13:57:58.048007 ---      ParallelTerminationStrategy: PID 30300 died...
13:57:58.100740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30300): Terminated: ok {rc=0}
13:57:58.110289 ---      ParallelTerminationStrategy: PID 30303 died...
13:57:58.162870 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30303): Terminated: ok {rc=0}
13:57:58.250577 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30301): Process ended prematurely: osmo-stp_10.42.42.5(pid=30301) [trial-2405↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30301)]