Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=30272): Process ended prematurely: osmo-stp_10.42.42.5(pid=30272) [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30272)]
Standard Output
---------------------------------------------- trial-2405 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 13:57:27.628324 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:27.640386 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 13:57:27.777042 tst ping_idle_ping.py: using LAC 41370 13:57:27.903979 tst ping_idle_ping.py: using RAC 60 13:57:28.023842 tst ping_idle_ping.py: using CellId 41370 13:57:28.142236 tst ping_idle_ping.py: using BVCI 41371 13:57:28.165062 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.175602 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.186183 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.196583 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.207004 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.217409 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.227978 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 13:57:28.238545 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 13:57:28.530401 tst ping_idle_ping.py:24: start network... 13:57:28.665388 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:57:29.173331 run create_hlr_db(pid=30266): Launched 13:57:29.360119 bus /gobi_6: Setting Powered False 13:57:30.380619 run create_hlr_db(pid=30266): Terminated: ok {rc=0} 13:57:30.783548 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30268): Launched 13:57:31.224126 run osmo-hlr_10.42.42.2(pid=30269): Launched 13:57:31.439278 run osmo-stp_10.42.42.5: Starting osmo-stp 13:57:32.068478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30271): Launched 13:57:32.404518 run osmo-stp_10.42.42.5(pid=30272): Launched 13:57:32.525684 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:57:33.084750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30274): Launched 13:57:33.200045 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:57:33.479399 run patchelf(pid=30275): Launched 13:57:33.667144 run osmo-stp_10.42.42.5(pid=30272): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30272)] 13:57:33.804536 run osmo-stp_10.42.42.5(pid=30272): stdout: | (launched: 2022-12-14_13:57:32.234898) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:33.942810 run osmo-stp_10.42.42.5(pid=30272): stderr: | �[0;m�[38;5;43m20221214135732437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214135732438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214135732438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214135732438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:34.076354 run osmo-stp_10.42.42.5(pid=30272): stdout: | (launched: 2022-12-14_13:57:32.234898) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:34.208667 run osmo-stp_10.42.42.5(pid=30272): stderr: | �[0;m�[38;5;43m20221214135732437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214135732438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214135732438 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214135732438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214135732441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:34.361962 run patchelf(pid=30275): Terminating (SIGINT) 13:57:34.541370 run patchelf(pid=30275): Terminated: ok {rc=0} 13:57:34.573846 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30272): Process ended prematurely: osmo-stp_10.42.42.5(pid=30272) [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30272)] [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 13:57:34.582996 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 13:57:34.646497 run osmo-hlr_10.42.42.2(pid=30269): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30269)] 13:57:34.698493 run osmo-hlr_10.42.42.2(pid=30269): stdout: | (launched: 2022-12-14_13:57:30.952672) 13:57:34.750851 run osmo-hlr_10.42.42.2(pid=30269): stderr: | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214135731358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214135731379 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214135731392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214135731392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214135731392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:57:34.795991 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30268): Terminating (SIGTERM) 13:57:34.839027 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30271): Terminating (SIGTERM) 13:57:34.881627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30274): Terminating (SIGTERM) 13:57:34.891832 --- ParallelTerminationStrategy: PID 30268 died... 13:57:34.948984 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30268): Terminated: ok {rc=0} 13:57:34.959399 --- ParallelTerminationStrategy: PID 30271 died... 13:57:35.016202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30271): Terminated: ok {rc=0} 13:57:35.026533 --- ParallelTerminationStrategy: PID 30274 died... 13:57:35.083234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30274): Terminated: ok {rc=0} 13:57:35.170369 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30272): Process ended prematurely: osmo-stp_10.42.42.5(pid=30272) [trial-2405↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30272)]