Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27110): Process ended prematurely: osmo-stp_10.42.42.5(pid=27110) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27110)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:27:26.067760 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.078623 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:27:26.240458 tst cs_paging_gprs_active.py: using LAC 41210 13:27:26.359515 tst cs_paging_gprs_active.py: using RAC 155 13:27:26.476901 tst cs_paging_gprs_active.py: using CellId 41210 13:27:26.596083 tst cs_paging_gprs_active.py: using BVCI 41211 13:27:26.619363 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.630188 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.640905 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.651526 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.662392 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.673245 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.684193 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.695000 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:26.706024 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:27:26.827742 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:27:27.108199 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:27:27.234867 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:27.548889 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27100): Launched 13:27:27.809351 run iperf3-srv_10.42.42.10(pid=27101): Launched 13:27:27.993508 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:27:28.119676 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:28.433220 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27102): Launched 13:27:28.692788 run iperf3-srv_10.42.42.10(pid=27103): Launched 13:27:28.877641 tst cs_paging_gprs_active.py:38: start network... 13:27:29.003159 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:27:29.486546 run create_hlr_db(pid=27104): Launched 13:27:29.660444 bus /gobi_6: Setting Powered False 13:27:30.682685 run create_hlr_db(pid=27104): Terminated: ok {rc=0} 13:27:31.163832 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27106): Launched 13:27:31.603259 run osmo-hlr_10.42.42.2(pid=27107): Launched 13:27:31.879702 run osmo-stp_10.42.42.5: Starting osmo-stp 13:27:32.576681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27109): Launched 13:27:32.900540 run osmo-stp_10.42.42.5(pid=27110): Launched 13:27:33.018772 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:27:33.582409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27112): Launched 13:27:33.698448 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:27:33.979925 run patchelf(pid=27113): Launched 13:27:34.169641 run osmo-stp_10.42.42.5(pid=27110): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27110)] 13:27:34.307979 run osmo-stp_10.42.42.5(pid=27110): stdout: | (launched: 2022-12-14_13:27:32.741893) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:34.446798 run osmo-stp_10.42.42.5(pid=27110): stderr: | �[0;m�[38;5;43m20221214132732937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132732937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132732938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132732938 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:34.580703 run osmo-stp_10.42.42.5(pid=27110): stdout: | (launched: 2022-12-14_13:27:32.741893) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:34.713676 run osmo-stp_10.42.42.5(pid=27110): stderr: | �[0;m�[38;5;43m20221214132732937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132732937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132732938 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132732938 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132732939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:34.867987 run patchelf(pid=27113): Terminating (SIGINT) 13:27:35.049783 run patchelf(pid=27113): Terminated: ok {rc=0} 13:27:35.083032 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27110): Process ended prematurely: osmo-stp_10.42.42.5(pid=27110) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27110)] [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:27:35.092689 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 13:27:35.155769 run osmo-hlr_10.42.42.2(pid=27107): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27107)] 13:27:35.206972 run osmo-hlr_10.42.42.2(pid=27107): stdout: | (launched: 2022-12-14_13:27:31.335098) 13:27:35.258758 run osmo-hlr_10.42.42.2(pid=27107): stderr: | �[0;m�[1;31m20221214132731713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214132731713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214132731713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214132731713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214132731714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214132731714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214132731730 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214132731751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214132731752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214132731752 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:27:35.303325 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27100): Terminating (SIGTERM) 13:27:35.345099 run iperf3-srv_10.42.42.10(pid=27101): Terminating (SIGTERM) 13:27:35.387255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27102): Terminating (SIGTERM) 13:27:35.428909 run iperf3-srv_10.42.42.10(pid=27103): Terminating (SIGTERM) 13:27:35.471091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27106): Terminating (SIGTERM) 13:27:35.512688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27109): Terminating (SIGTERM) 13:27:35.554367 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27112): Terminating (SIGTERM) 13:27:35.563914 --- ParallelTerminationStrategy: PID 27100 died... 13:27:35.619834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27100): Terminated: ok {rc=0} 13:27:35.629769 --- ParallelTerminationStrategy: PID 27101 died... 13:27:35.685414 run iperf3-srv_10.42.42.10(pid=27101): Terminated {rc=256} 13:27:35.695382 --- ParallelTerminationStrategy: PID 27102 died... 13:27:35.751286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27102): Terminated: ok {rc=0} 13:27:35.761259 --- ParallelTerminationStrategy: PID 27103 died... 13:27:35.816866 run iperf3-srv_10.42.42.10(pid=27103): Terminated {rc=256} 13:27:35.826830 --- ParallelTerminationStrategy: PID 27106 died... 13:27:35.882860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27106): Terminated: ok {rc=0} 13:27:35.892830 --- ParallelTerminationStrategy: PID 27109 died... 13:27:35.948672 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27109): Terminated: ok {rc=0} 13:27:35.958623 --- ParallelTerminationStrategy: PID 27112 died... 13:27:36.014716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27112): Terminated: ok {rc=0} 13:27:36.101820 bus /gobi_0: Setting Powered False 13:27:37.206027 bus /gobi_0: Setting Powered False 13:27:38.316714 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27110): Process ended prematurely: osmo-stp_10.42.42.5(pid=27110) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27110)]