Skip to content

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 269 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3776): Process ended prematurely: osmo-stp_10.42.42.5(pid=3776) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3776)]

Standard Output

----------------------------------------------
trial-2406 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
14:55:14.229649 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.241374 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
14:55:14.402296 tst                        iperf3.py: using LAC 41672
14:55:14.519580 tst                        iperf3.py: using RAC 107
14:55:14.639347 tst                        iperf3.py: using CellId 41672
14:55:14.758560 tst                        iperf3.py: using BVCI 41673
14:55:14.781527 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.792305 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.803123 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.813921 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.824895 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.836250 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.847360 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.858378 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
14:55:14.870005 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
14:55:15.162763 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
14:55:15.297516 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
14:55:15.633086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3768): Launched
14:55:15.929790 run iperf3-srv_10.42.42.10(pid=3769): Launched
14:55:16.139236 tst                      iperf3.py:8: start network...
14:55:16.276279 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
14:55:16.835529 run          create_hlr_db(pid=3770): Launched
14:55:17.025508 bus                          /gobi_6: Setting Powered False
14:55:18.033735 run          create_hlr_db(pid=3770): Terminated: ok {rc=0}
14:55:18.474100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3772): Launched
14:55:18.797177 run    osmo-hlr_10.42.42.2(pid=3773): Launched
14:55:18.917523 run              osmo-stp_10.42.42.5: Starting osmo-stp
14:55:19.480479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3775): Launched
14:55:19.802740 run    osmo-stp_10.42.42.5(pid=3776): Launched
14:55:19.919103 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
14:55:20.483652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3778): Launched
14:55:20.599076 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
14:55:20.881681 run               patchelf(pid=3779): Launched
14:55:21.071490 run    osmo-stp_10.42.42.5(pid=3776): ERR: Terminated: ERROR {rc=1}  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3776)]
14:55:21.209777 run    osmo-stp_10.42.42.5(pid=3776): stdout: 
| (launched: 2022-12-14_14:55:19.644880)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:55:21.347888 run    osmo-stp_10.42.42.5(pid=3776): stderr: 
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214145519840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:55:21.481403 run    osmo-stp_10.42.42.5(pid=3776): stdout: 
| (launched: 2022-12-14_14:55:19.644880)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:55:21.614158 run    osmo-stp_10.42.42.5(pid=3776): stderr: 
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214145519840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214145519840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214145519841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:55:21.768430 run               patchelf(pid=3779): Terminating (SIGINT)
14:55:21.950510 run               patchelf(pid=3779): Terminated: ok {rc=0}
14:55:21.983902 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3776): Process ended prematurely: osmo-stp_10.42.42.5(pid=3776) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3776)]  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
14:55:21.993819 tst                      iperf3.py:8: Test FAILED (7.8 sec)
14:55:22.057355 run    osmo-hlr_10.42.42.2(pid=3773): ERR: Terminated: ERROR {rc=237}  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3773)]
14:55:22.109026 run    osmo-hlr_10.42.42.2(pid=3773): stdout: 
| (launched: 2022-12-14_14:55:18.638594) 
14:55:22.161298 run    osmo-hlr_10.42.42.2(pid=3773): stderr: 
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214145518840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214145518855 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214145518865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214145518865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214145518865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
14:55:22.206118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3768): Terminating (SIGTERM)
14:55:22.248271 run iperf3-srv_10.42.42.10(pid=3769): Terminating (SIGTERM)
14:55:22.290755 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3772): Terminating (SIGTERM)
14:55:22.333049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3775): Terminating (SIGTERM)
14:55:22.375169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3778): Terminating (SIGTERM)
14:55:22.385002 ---      ParallelTerminationStrategy: PID 3768 died...
14:55:22.440858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3768): Terminated: ok {rc=0}
14:55:22.450858 ---      ParallelTerminationStrategy: PID 3769 died...
14:55:22.506186 run iperf3-srv_10.42.42.10(pid=3769): Terminated {rc=256}
14:55:22.516059 ---      ParallelTerminationStrategy: PID 3772 died...
14:55:22.571478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3772): Terminated: ok {rc=0}
14:55:22.581870 ---      ParallelTerminationStrategy: PID 3775 died...
14:55:22.637266 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3775): Terminated: ok {rc=0}
14:55:22.647176 ---      ParallelTerminationStrategy: PID 3778 died...
14:55:22.702340 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3778): Terminated: ok {rc=0}
14:55:22.789240 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3776): Process ended prematurely: osmo-stp_10.42.42.5(pid=3776) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3776)]