Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)

Failing for the past 70 builds (Since #2318 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]

Standard Output

----------------------------------------------
trial-2387 gprs:trx-b200 cs_paging_gprs_active.py
----------------------------------------------
08:55:11.227262 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.238339 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
08:55:11.378956 tst         cs_paging_gprs_active.py: using LAC 32850
08:55:11.505336 tst         cs_paging_gprs_active.py: using RAC 210
08:55:11.631674 tst         cs_paging_gprs_active.py: using CellId 32850
08:55:11.751838 tst         cs_paging_gprs_active.py: using BVCI 32851
08:55:11.774621 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.785214 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.795556 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.805839 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.815946 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.826355 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.836918 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.847301 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
08:55:11.858181 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
08:55:11.973526 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
08:55:12.263775 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
08:55:12.396843 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:55:12.723414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Launched
08:55:12.997312 run iperf3-srv_10.42.42.10(pid=28837): Launched
08:55:13.192392 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
08:55:13.325252 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:55:13.653538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Launched
08:55:13.926032 run iperf3-srv_10.42.42.10(pid=28839): Launched
08:55:14.120802 tst      cs_paging_gprs_active.py:38: start network...
08:55:14.253782 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:55:14.762381 run         create_hlr_db(pid=28840): Launched
08:55:14.947658 bus                        /sierra_2: Setting Powered False
08:55:15.969444 run         create_hlr_db(pid=28840): Terminated: ok {rc=0}
08:55:16.415462 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Launched
08:55:16.861299 run   osmo-hlr_10.42.42.2(pid=28843): Launched
08:55:17.101434 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:55:17.709464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Launched
08:55:18.006556 run   osmo-stp_10.42.42.5(pid=28846): Launched
08:55:18.116818 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:55:18.633949 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Launched
08:55:18.740118 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:55:18.998488 run              patchelf(pid=28849): Launched
08:55:19.173190 run   osmo-stp_10.42.42.5(pid=28846): ERR: Terminated: ERROR {rc=1}  [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]
08:55:19.300517 run   osmo-stp_10.42.42.5(pid=28846): stdout: 
| (launched: 2022-12-13_08:55:17.860533)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:55:19.428336 run   osmo-stp_10.42.42.5(pid=28846): stderr: 
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213085518029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:55:19.551603 run   osmo-stp_10.42.42.5(pid=28846): stdout: 
| (launched: 2022-12-13_08:55:17.860533)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:55:19.673607 run   osmo-stp_10.42.42.5(pid=28846): stderr: 
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213085518028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213085518029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213085518031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:55:19.815510 run              patchelf(pid=28849): Terminating (SIGINT)
08:55:19.982564 run              patchelf(pid=28849): Terminated: ok {rc=0}
08:55:20.013449 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]  [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38]
08:55:20.022705 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
08:55:20.082466 run   osmo-hlr_10.42.42.2(pid=28843): ERR: Terminated: ERROR {rc=237}  [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28843)]
08:55:20.131070 run   osmo-hlr_10.42.42.2(pid=28843): stdout: 
| (launched: 2022-12-13_08:55:16.580135) 
08:55:20.180358 run   osmo-hlr_10.42.42.2(pid=28843): stderr: 
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213085517004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213085517031 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213085517057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213085517061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213085517061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:55:20.222452 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Terminating (SIGTERM)
08:55:20.262184 run iperf3-srv_10.42.42.10(pid=28837): Terminating (SIGTERM)
08:55:20.301894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Terminating (SIGTERM)
08:55:20.341508 run iperf3-srv_10.42.42.10(pid=28839): Terminating (SIGTERM)
08:55:20.381109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Terminating (SIGTERM)
08:55:20.420658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Terminating (SIGTERM)
08:55:20.460799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Terminating (SIGTERM)
08:55:20.470085 ---      ParallelTerminationStrategy: PID 28836 died...
08:55:20.523851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28836): Terminated: ok {rc=0}
08:55:20.533395 ---      ParallelTerminationStrategy: PID 28837 died...
08:55:20.586339 run iperf3-srv_10.42.42.10(pid=28837): Terminated {rc=256}
08:55:20.595695 ---      ParallelTerminationStrategy: PID 28838 died...
08:55:20.648259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28838): Terminated: ok {rc=0}
08:55:20.657646 ---      ParallelTerminationStrategy: PID 28839 died...
08:55:20.710329 run iperf3-srv_10.42.42.10(pid=28839): Terminated {rc=256}
08:55:20.719657 ---      ParallelTerminationStrategy: PID 28842 died...
08:55:20.772378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28842): Terminated: ok {rc=0}
08:55:20.781836 ---      ParallelTerminationStrategy: PID 28845 died...
08:55:20.834644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28845): Terminated: ok {rc=0}
08:55:20.844230 ---      ParallelTerminationStrategy: PID 28848 died...
08:55:20.897357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28848): Terminated: ok {rc=0}
08:55:20.985383 bus                          /gobi_0: Setting Powered False
08:55:22.087299 bus                          /gobi_0: Setting Powered False
08:55:23.192982 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
    setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28846): Process ended prematurely: osmo-stp_10.42.42.5(pid=28846) [trial-2387↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28846)]