Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22382): Process ended prematurely: osmo-stp_10.42.42.5(pid=22382) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22382)]
Standard Output
---------------------------------------------- trial-2389 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 12:46:28.311062 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.323934 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:46:28.473741 tst iperf3m4.py: using LAC 34040 12:46:28.600629 tst iperf3m4.py: using RAC 125 12:46:28.728264 tst iperf3m4.py: using CellId 34040 12:46:28.856730 tst iperf3m4.py: using BVCI 34041 12:46:28.881614 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.893634 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.905568 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.917397 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.929701 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.941951 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.954519 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.966784 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:28.979382 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:29.097330 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:29.220271 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:29.340208 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:29.624024 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 12:46:29.751473 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:30.068540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22368): Launched 12:46:30.332020 run iperf3-srv_10.42.42.10(pid=22369): Launched 12:46:30.517672 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 12:46:30.643677 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:30.998297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22370): Launched 12:46:31.316576 run iperf3-srv_10.42.42.10(pid=22371): Launched 12:46:31.522509 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 12:46:31.663106 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:32.023192 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22372): Launched 12:46:32.307290 run iperf3-srv_10.42.42.10(pid=22373): Launched 12:46:32.507993 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 12:46:32.644438 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:32.984255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22374): Launched 12:46:33.266209 run iperf3-srv_10.42.42.10(pid=22375): Launched 12:46:33.465995 tst iperf3m4.py:8: start network... 12:46:33.601794 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:46:34.116229 run create_hlr_db(pid=22376): Launched 12:46:34.304891 bus /gobi_6: Setting Powered False 12:46:35.325654 run create_hlr_db(pid=22376): Terminated: ok {rc=0} 12:46:35.759026 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22378): Launched 12:46:36.085495 run osmo-hlr_10.42.42.2(pid=22379): Launched 12:46:36.206131 run osmo-stp_10.42.42.5: Starting osmo-stp 12:46:36.775188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22381): Launched 12:46:37.102313 run osmo-stp_10.42.42.5(pid=22382): Launched 12:46:37.225772 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:46:37.795101 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22384): Launched 12:46:37.911050 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:46:38.195974 run patchelf(pid=22385): Launched 12:46:38.386025 run osmo-stp_10.42.42.5(pid=22382): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22382)] 12:46:38.524657 run osmo-stp_10.42.42.5(pid=22382): stdout: | (launched: 2022-12-13_12:46:36.940623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:38.663939 run osmo-stp_10.42.42.5(pid=22382): stderr: | �[0;m�[38;5;43m20221213124637130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124637131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124637131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124637131 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:38.798387 run osmo-stp_10.42.42.5(pid=22382): stdout: | (launched: 2022-12-13_12:46:36.940623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:38.931032 run osmo-stp_10.42.42.5(pid=22382): stderr: | �[0;m�[38;5;43m20221213124637130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124637131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124637131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124637131 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124637132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:39.086160 run patchelf(pid=22385): Terminating (SIGINT) 12:46:39.268171 run patchelf(pid=22385): Terminated: ok {rc=0} 12:46:39.302065 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22382): Process ended prematurely: osmo-stp_10.42.42.5(pid=22382) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22382)] [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 12:46:39.312322 tst iperf3m4.py:8: Test FAILED (11.0 sec) 12:46:39.376423 run osmo-hlr_10.42.42.2(pid=22379): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22379)] 12:46:39.428113 run osmo-hlr_10.42.42.2(pid=22379): stdout: | (launched: 2022-12-13_12:46:35.923663) 12:46:39.480601 run osmo-hlr_10.42.42.2(pid=22379): stderr: | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213124636119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213124636131 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213124636139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213124636139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213124636140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:46:39.525500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22368): Terminating (SIGTERM) 12:46:39.567625 run iperf3-srv_10.42.42.10(pid=22369): Terminating (SIGTERM) 12:46:39.609783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22370): Terminating (SIGTERM) 12:46:39.651810 run iperf3-srv_10.42.42.10(pid=22371): Terminating (SIGTERM) 12:46:39.694784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22372): Terminating (SIGTERM) 12:46:39.737486 run iperf3-srv_10.42.42.10(pid=22373): Terminating (SIGTERM) 12:46:39.779489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22374): Terminating (SIGTERM) 12:46:39.821393 run iperf3-srv_10.42.42.10(pid=22375): Terminating (SIGTERM) 12:46:39.863319 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22378): Terminating (SIGTERM) 12:46:39.905743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22381): Terminating (SIGTERM) 12:46:39.947734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22384): Terminating (SIGTERM) 12:46:39.957400 --- ParallelTerminationStrategy: PID 22368 died... 12:46:40.013577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22368): Terminated: ok {rc=0} 12:46:40.023491 --- ParallelTerminationStrategy: PID 22369 died... 12:46:40.079449 run iperf3-srv_10.42.42.10(pid=22369): Terminated {rc=256} 12:46:40.089431 --- ParallelTerminationStrategy: PID 22370 died... 12:46:40.145426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22370): Terminated: ok {rc=0} 12:46:40.155417 --- ParallelTerminationStrategy: PID 22371 died... 12:46:40.211351 run iperf3-srv_10.42.42.10(pid=22371): Terminated {rc=256} 12:46:40.221318 --- ParallelTerminationStrategy: PID 22372 died... 12:46:40.277150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22372): Terminated: ok {rc=0} 12:46:40.287009 --- ParallelTerminationStrategy: PID 22373 died... 12:46:40.342940 run iperf3-srv_10.42.42.10(pid=22373): Terminated {rc=256} 12:46:40.352844 --- ParallelTerminationStrategy: PID 22374 died... 12:46:40.408602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22374): Terminated: ok {rc=0} 12:46:40.418531 --- ParallelTerminationStrategy: PID 22375 died... 12:46:40.474504 run iperf3-srv_10.42.42.10(pid=22375): Terminated {rc=256} 12:46:40.484441 --- ParallelTerminationStrategy: PID 22378 died... 12:46:40.540439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22378): Terminated: ok {rc=0} 12:46:40.550446 --- ParallelTerminationStrategy: PID 22381 died... 12:46:40.606434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22381): Terminated: ok {rc=0} 12:46:40.616356 --- ParallelTerminationStrategy: PID 22384 died... 12:46:40.672742 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22384): Terminated: ok {rc=0} 12:46:40.760241 bus /gobi_4: Setting Powered False 12:46:41.866168 bus /gobi_4: Setting Powered False 12:46:42.974061 bus /gobi_1: Setting Powered False 12:46:44.080359 bus /gobi_1: Setting Powered False 12:46:45.187812 bus /gobi_0: Setting Powered False 12:46:46.308056 bus /gobi_0: Setting Powered False 12:46:47.421208 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22382): Process ended prematurely: osmo-stp_10.42.42.5(pid=22382) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22382)]