Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14852): Process ended prematurely: osmo-stp_10.42.42.5(pid=14852) [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14852)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 05:55:06.174865 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.186812 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 05:55:06.338725 tst cs_paging_gprs_active.py: using LAC 38863 05:55:06.468302 tst cs_paging_gprs_active.py: using RAC 103 05:55:06.598146 tst cs_paging_gprs_active.py: using CellId 38863 05:55:06.729319 tst cs_paging_gprs_active.py: using BVCI 38864 05:55:06.755018 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.767162 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.779065 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.790876 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.802600 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.814250 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.826065 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.837649 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:55:06.849541 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:55:06.969155 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:55:07.258009 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:55:07.390269 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:55:07.720929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14842): Launched 05:55:07.993432 run iperf3-srv_10.42.42.10(pid=14843): Launched 05:55:08.187142 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:55:08.319519 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:55:08.647489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14844): Launched 05:55:08.919855 run iperf3-srv_10.42.42.10(pid=14845): Launched 05:55:09.113241 tst cs_paging_gprs_active.py:38: start network... 05:55:09.245146 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:55:09.741428 run create_hlr_db(pid=14846): Launched 05:55:09.923749 bus /gobi_6: Setting Powered False 05:55:10.943286 run create_hlr_db(pid=14846): Terminated: ok {rc=0} 05:55:11.387786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14848): Launched 05:55:11.723660 run osmo-hlr_10.42.42.2(pid=14849): Launched 05:55:11.849332 run osmo-stp_10.42.42.5: Starting osmo-stp 05:55:12.433321 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14851): Launched 05:55:12.771516 run osmo-stp_10.42.42.5(pid=14852): Launched 05:55:12.896363 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:55:13.481946 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14854): Launched 05:55:13.602187 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:55:13.894714 run patchelf(pid=14855): Launched 05:55:14.090709 run osmo-stp_10.42.42.5(pid=14852): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14852)] 05:55:14.233843 run osmo-stp_10.42.42.5(pid=14852): stdout: | (launched: 2022-12-14_05:55:12.604853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:55:14.377158 run osmo-stp_10.42.42.5(pid=14852): stderr: | �[0;m�[38;5;43m20221214055512799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055512799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055512800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055512800 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:55:14.515155 run osmo-stp_10.42.42.5(pid=14852): stdout: | (launched: 2022-12-14_05:55:12.604853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:55:14.652723 run osmo-stp_10.42.42.5(pid=14852): stderr: | �[0;m�[38;5;43m20221214055512799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055512799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055512800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055512800 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055512801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:55:14.812636 run patchelf(pid=14855): Terminating (SIGINT) 05:55:15.000611 run patchelf(pid=14855): Terminated: ok {rc=0} 05:55:15.035076 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14852): Process ended prematurely: osmo-stp_10.42.42.5(pid=14852) [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14852)] [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 05:55:15.045210 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:55:15.108743 run osmo-hlr_10.42.42.2(pid=14849): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14849)] 05:55:15.160674 run osmo-hlr_10.42.42.2(pid=14849): stdout: | (launched: 2022-12-14_05:55:11.558690) 05:55:15.213260 run osmo-hlr_10.42.42.2(pid=14849): stderr: | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214055511757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214055511769 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214055511778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214055511778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214055511778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:55:15.258303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14842): Terminating (SIGTERM) 05:55:15.300598 run iperf3-srv_10.42.42.10(pid=14843): Terminating (SIGTERM) 05:55:15.344505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14844): Terminating (SIGTERM) 05:55:15.387041 run iperf3-srv_10.42.42.10(pid=14845): Terminating (SIGTERM) 05:55:15.429756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14848): Terminating (SIGTERM) 05:55:15.471925 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14851): Terminating (SIGTERM) 05:55:15.514688 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14854): Terminating (SIGTERM) 05:55:15.524429 --- ParallelTerminationStrategy: PID 14842 died... 05:55:15.580668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14842): Terminated: ok {rc=0} 05:55:15.591187 --- ParallelTerminationStrategy: PID 14843 died... 05:55:15.647353 run iperf3-srv_10.42.42.10(pid=14843): Terminated {rc=256} 05:55:15.657827 --- ParallelTerminationStrategy: PID 14844 died... 05:55:15.714084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14844): Terminated: ok {rc=0} 05:55:15.724123 --- ParallelTerminationStrategy: PID 14845 died... 05:55:15.780332 run iperf3-srv_10.42.42.10(pid=14845): Terminated {rc=256} 05:55:15.790475 --- ParallelTerminationStrategy: PID 14848 died... 05:55:15.852777 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14848): Terminated: ok {rc=0} 05:55:15.867970 --- ParallelTerminationStrategy: PID 14851 died... 05:55:15.938946 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14851): Terminated: ok {rc=0} 05:55:15.949516 --- ParallelTerminationStrategy: PID 14854 died... 05:55:16.006942 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14854): Terminated: ok {rc=0} 05:55:16.098739 bus /gobi_0: Setting Powered False 05:55:17.224287 bus /gobi_0: Setting Powered False 05:55:18.337744 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14852): Process ended prematurely: osmo-stp_10.42.42.5(pid=14852) [trial-2400↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14852)]