Skipping 200 KB..
Full LogXRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_packets:out:drop.
XRef to nonexistent id: ns:nsvc_packets:out:drop
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_bytes:out:drop.
XRef to nonexistent id: ns:nsvc_bytes:out:drop
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_unblocked.
XRef to nonexistent id: ns:nsvc_unblocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: gbproxy:peer_blocked.
XRef to nonexistent id: gbproxy:peer_blocked
Error: no ID for constraint linkend: gbproxy:peer_unblocked.
XRef to nonexistent id: gbproxy:peer_unblocked
Error: no ID for constraint linkend: gbproxy:peer_dropped.
XRef to nonexistent id: gbproxy:peer_dropped
Error: no ID for constraint linkend: gbproxy:peer_inv-nsei.
XRef to nonexistent id: gbproxy:peer_inv-nsei
Error: no ID for constraint linkend: gbproxy:peer_tx-err.
XRef to nonexistent id: gbproxy:peer_tx-err
Error: no ID for constraint linkend: gbproxy:global_inv-bvci.
XRef to nonexistent id: gbproxy:global_inv-bvci
Error: no ID for constraint linkend: gbproxy:global_inv-lai.
XRef to nonexistent id: gbproxy:global_inv-lai
Error: no ID for constraint linkend: gbproxy:global_inv-rai.
XRef to nonexistent id: gbproxy:global_inv-rai
Error: no ID for constraint linkend: gbproxy:global_inv-nsei.
XRef to nonexistent id: gbproxy:global_inv-nsei
Error: no ID for constraint linkend: gbproxy:global_proto-err:bss.
XRef to nonexistent id: gbproxy:global_proto-err:bss
Error: no ID for constraint linkend: gbproxy:global_proto-err:sgsn.
XRef to nonexistent id: gbproxy:global_proto-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_not-supp:bss.
XRef to nonexistent id: gbproxy:global_not-supp:bss
Error: no ID for constraint linkend: gbproxy:global_not-supp:sgsn.
XRef to nonexistent id: gbproxy:global_not-supp:sgsn
Error: no ID for constraint linkend: gbproxy:global_restart:sgsn.
XRef to nonexistent id: gbproxy:global_restart:sgsn
Error: no ID for constraint linkend: gbproxy:global_tx-err:sgsn.
XRef to nonexistent id: gbproxy:global_tx-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_error.
XRef to nonexistent id: gbproxy:global_error
Error: no ID for constraint linkend: gbproxy:global_mod-peer-err.
XRef to nonexistent id: gbproxy:global_mod-peer-err
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ns.bind_tx_backlog_length.
XRef to nonexistent id: ns.bind_tx_backlog_length
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__5.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig5.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__7.svg
rsvg-convert -a -f pdf -o fig7.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__8.svg
rsvg-convert -a -f pdf -o fig8.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__9.svg
rsvg-convert -a -f pdf -o fig9.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__10.svg
rsvg-convert -a -f pdf -o fig10.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__11.svg
rsvg-convert -a -f pdf -o fig11.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__12.svg
rsvg-convert -a -f pdf -o fig12.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__13.svg
rsvg-convert -a -f pdf -o fig13.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__14.svg
rsvg-convert -a -f pdf -o fig14.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__15.svg
Build osmogbproxy-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpozqrzlvs/osmogbproxy-usermanual.idx is empty
osmogbproxy-usermanual.aux MD5 checksum changed
osmogbproxy-usermanual.toc MD5 checksum changed
the /tmp/tmpozqrzlvs/osmogbproxy-usermanual.aux file has changed
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpozqrzlvs/osmogbproxy-usermanual.idx is empty
osmogbproxy-usermanual.aux MD5 checksum changed
the /tmp/tmpozqrzlvs/osmogbproxy-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmogbproxy-usermanual.pdf' successfully built
a2x: deleting /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making all in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making dvi in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making dvi in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making check in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmogbproxy-usermanual.check; \
fi
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
if ! [ -f osmogbproxy-usermanual.adoc ]; then \
ln -s osmogbproxy-usermanual.adoc osmogbproxy-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmogbproxy-usermanual.adoc > osmogbproxy-usermanual.check 2>&1
touch osmogbproxy-usermanual.check
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making check in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ------------------------------------- ##
## osmo-gbproxy 0.5.0.1-0aee test suite. ##
## ------------------------------------- ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-python-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26952/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26952 60.0 0.0 27868 23028 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26953 0.0 0.0 13012 6956 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26960 0.0 0.0 2576 924 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26962 0.0 0.0 3700 1820 ? S 21:16 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36058), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36058), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26952/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26952 5.5 0.0 27868 23028 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26963 0.0 0.0 13012 6872 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26970 0.0 0.0 2576 928 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26972 0.0 0.0 3700 1804 ? S 21:16 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36068), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36068), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26952/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26952 3.2 0.0 27868 23028 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26973 0.0 0.0 13012 6992 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26980 0.0 0.0 2576 908 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26982 0.0 0.0 3700 1956 ? S 21:16 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 4.436s
OK
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47298), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47298), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26983/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26983 53.3 0.0 28000 23232 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26984 0.0 0.0 13012 6976 ? S 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26991 0.0 0.0 2576 956 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26993 0.0 0.0 3700 1804 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47308), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47308), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r, test write_config
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r'
> ls -l /proc/26983/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26983 5.4 0.0 28152 23608 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26994 0.0 0.0 13012 6924 ? S 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r
build 27001 0.0 0.0 2576 888 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 27003 0.0 0.0 3700 1900 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47324), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47324), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r, test token_vty_command
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r'
> ls -l /proc/26983/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26983 2.8 0.0 28152 23608 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 27004 0.0 0.0 13012 6956 ? S 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfg97rwkp9r
build 27011 0.0 0.0 2576 948 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 27013 0.0 0.0 3700 1952 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47338), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47338), raddr=('127.0.0.1', 4246)> (0 sockets open)
../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
confpath /build/osmo-gbproxy-0.5.0.1-0aee/tests/.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific VTY commands
testVtyDeletePeer (__main__.TestVTYGbproxy.testVtyDeletePeer) ... Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/27014/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 27014 33.3 0.0 19308 14604 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 27015 0.0 0.0 13012 6884 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 27022 0.0 0.0 2576 888 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 27024 0.0 0.0 3700 1872 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47344), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47344), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyShow (__main__.TestVTYGbproxy.testVtyShow) ... Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/27014/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 27014 1.9 0.0 19308 14604 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 27025 0.0 0.0 13012 6940 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 27032 0.0 0.0 2576 920 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 27034 0.0 0.0 3700 1844 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47356), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47356), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyTree (__main__.TestVTYGbproxy.testVtyTree) ... Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/27014/fd
total 0
lr-x------ 1 build build 64 Dec 23 21:16 0 -> pipe:[2371687173]
l-wx------ 1 build build 64 Dec 23 21:16 1 -> pipe:[2371687174]
l-wx------ 1 build build 64 Dec 23 21:16 2 -> pipe:[2371687175]
l-wx------ 1 build build 64 Dec 23 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 24277 0.0 0.0 3924 2980 ? S 21:16 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 26722 0.0 0.0 3924 3000 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26829 0.0 0.0 3924 3048 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 27014 0.9 0.0 19308 14604 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 27035 0.0 0.0 13012 6892 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 27042 0.0 0.0 2576 880 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 27044 0.0 0.0 3700 1788 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47364), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 47364), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
----------------------------------------------------------------------
Ran 3 tests in 4.431s
OK
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-transcript-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg" \
${T:-../../../tests/osmo-gbproxy_test-nodes.vty}
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
% no NRI mappings
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy_test-nodes.vty
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg" \
${T:-../../../tests/osmo-gbproxy-pool_test-nodes.vty}
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00102) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
nri add 1
sgsn nsei 102
nri add 2
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy-pool_test-nodes.vty
rm -f ./sms.db ./gsn_restart
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make ctrl-python-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
../../../tests/ctrl_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
----------------------------------------------------------------------
Ran 0 tests in 0.000s
OK
confpath /build/osmo-gbproxy-0.5.0.1-0aee/tests/.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific control commands
GbProxy has no CTRL tests yet
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making installcheck in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making installcheck in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' \
## ------------------------------------- ##
## osmo-gbproxy 0.5.0.1-0aee test suite. ##
## ------------------------------------- ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
( cd '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
( cd '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-24277//build/osmo-gbproxy-0.5.0.1-0aee/_inst//lib/systemd/system' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
test -d "osmo-gbproxy-0.5.0.1-0aee" || mkdir "osmo-gbproxy-0.5.0.1-0aee"
(cd include && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
(cd osmocom && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
(cd gbproxy && make top_distdir=../../../osmo-gbproxy-0.5.0.1-0aee distdir=../../../osmo-gbproxy-0.5.0.1-0aee/include/osmocom/gbproxy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make distdir-am
make[9]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[9]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
(cd src && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
(cd doc && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make \
top_distdir="../../osmo-gbproxy-0.5.0.1-0aee" distdir="../../osmo-gbproxy-0.5.0.1-0aee/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-gbproxy-0.5.0.1-0aee/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
(cd tests && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make \
top_distdir="osmo-gbproxy-0.5.0.1-0aee" distdir="osmo-gbproxy-0.5.0.1-0aee" \
dist-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
echo 0.5.0.1-0aee > osmo-gbproxy-0.5.0.1-0aee/.tarball-version
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
test -n "" \
|| find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-gbproxy-0.5.0.1-0aee/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-gbproxy-0.5.0.1-0aee"
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
tardir=osmo-gbproxy-0.5.0.1-0aee && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-gbproxy-0.5.0.1-0aee.tar.bz2
tardir=osmo-gbproxy-0.5.0.1-0aee && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-gbproxy-0.5.0.1-0aee.tar.gz
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making distclean in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making distclean in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../../include/osmocom/gbproxy" || test -z "" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmocom" || test -z "" || rm -f
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-gbproxy
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making distclean in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -rf osmogbproxy-usermanual__*.png osmogbproxy-usermanual__*.svg osmogbproxy-usermanual.check osmogbproxy-usermanual.pdf osmogbproxy-usermanual.html osmogbproxy-vty-reference.pdf osmogbproxy-vty-reference.lint generated ./vty/gbproxy_vty_reference.xml common build generated/.pdf_shrink_marker
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making distclean in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
===========================================================
osmo-gbproxy-0.5.0.1-0aee archives ready for distribution:
osmo-gbproxy-0.5.0.1-0aee.tar.gz
osmo-gbproxy-0.5.0.1-0aee.tar.bz2
===========================================================
+ '[' 1 = 1 ']'
+ '[' 1 = 1 ']'
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf
* osmogbproxy-usermanual.pdf: 744K
* osmogbproxy-vty-reference.pdf: 260K
[ -n "osmo-gbproxy" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-gbproxy/master"
cp osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf "_publish_tmpdir/osmo-gbproxy/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-gbproxy" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-gbproxy/
osmo-gbproxy/master/
osmo-gbproxy/master/osmogbproxy-usermanual.pdf
osmo-gbproxy/master/osmogbproxy-vty-reference.pdf
sent 24,121 bytes received 7,608 bytes 63,458.00 bytes/sec
total size is 1,023,134 speedup is 32.25
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 8 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmocom
make[2]: Entering directory '/build/include/osmocom'
Making maintainer-clean in gbproxy
make[3]: Entering directory '/build/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/include/osmocom/gbproxy'
make[3]: Entering directory '/build/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/include/osmocom'
rm -f Makefile
make[2]: Leaving directory '/build/include/osmocom'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f osmo-gbproxy
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
test -z "atconfig " || rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing bscconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmogbproxy-usermanual.check
Removing doc/manuals/osmogbproxy-usermanual.html
Removing doc/manuals/osmogbproxy-usermanual.pdf
Removing doc/manuals/osmogbproxy-usermanual__1.svg
Removing doc/manuals/osmogbproxy-usermanual__10.svg
Removing doc/manuals/osmogbproxy-usermanual__11.svg
Removing doc/manuals/osmogbproxy-usermanual__12.svg
Removing doc/manuals/osmogbproxy-usermanual__13.svg
Removing doc/manuals/osmogbproxy-usermanual__14.svg
Removing doc/manuals/osmogbproxy-usermanual__15.svg
Removing doc/manuals/osmogbproxy-usermanual__2.svg
Removing doc/manuals/osmogbproxy-usermanual__3.svg
Removing doc/manuals/osmogbproxy-usermanual__4.svg
Removing doc/manuals/osmogbproxy-usermanual__5.svg
Removing doc/manuals/osmogbproxy-usermanual__6.svg
Removing doc/manuals/osmogbproxy-usermanual__7.svg
Removing doc/manuals/osmogbproxy-usermanual__8.svg
Removing doc/manuals/osmogbproxy-usermanual__9.svg
Removing doc/manuals/osmogbproxy-vty-reference.pdf
Removing doc/manuals/vty/gbproxy_vty_reference.xml
Removing include/Makefile.in
Removing include/osmocom/Makefile.in
Removing include/osmocom/gbproxy/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing osmo-gbproxy-0.5.0.1-0aee.tar.bz2
Removing osmo-gbproxy-0.5.0.1-0aee.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins12177357519182067834.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2207511 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
