Skipping 206 KB..
Full LogXRef to nonexistent id: gbproxy:global_proto-err:bss
Error: no ID for constraint linkend: gbproxy:global_proto-err:sgsn.
XRef to nonexistent id: gbproxy:global_proto-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_not-supp:bss.
XRef to nonexistent id: gbproxy:global_not-supp:bss
Error: no ID for constraint linkend: gbproxy:global_not-supp:sgsn.
XRef to nonexistent id: gbproxy:global_not-supp:sgsn
Error: no ID for constraint linkend: gbproxy:global_restart:sgsn.
XRef to nonexistent id: gbproxy:global_restart:sgsn
Error: no ID for constraint linkend: gbproxy:global_tx-err:sgsn.
XRef to nonexistent id: gbproxy:global_tx-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_error.
XRef to nonexistent id: gbproxy:global_error
Error: no ID for constraint linkend: gbproxy:global_mod-peer-err.
XRef to nonexistent id: gbproxy:global_mod-peer-err
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ns.bind_tx_backlog_length.
XRef to nonexistent id: ns.bind_tx_backlog_length
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__5.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig5.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__7.svg
rsvg-convert -a -f pdf -o fig7.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__8.svg
rsvg-convert -a -f pdf -o fig8.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__9.svg
rsvg-convert -a -f pdf -o fig9.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__10.svg
rsvg-convert -a -f pdf -o fig10.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__11.svg
rsvg-convert -a -f pdf -o fig11.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__12.svg
rsvg-convert -a -f pdf -o fig12.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__13.svg
rsvg-convert -a -f pdf -o fig13.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__14.svg
rsvg-convert -a -f pdf -o fig14.pdf /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual__15.svg
Build osmogbproxy-usermanual.pdf
built-in module pdftex registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
osmogbproxy-usermanual.aux MD5 checksum changed
osmogbproxy-usermanual.toc MD5 checksum changed
the /tmp/tmpb84lf_so/osmogbproxy-usermanual.aux file has changed
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
osmogbproxy-usermanual.aux MD5 checksum changed
the /tmp/tmpb84lf_so/osmogbproxy-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmogbproxy-usermanual.pdf' successfully built
a2x: deleting /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making all in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making dvi in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making dvi in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making check in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmogbproxy-usermanual.check; \
fi
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
if ! [ -f osmogbproxy-usermanual.adoc ]; then \
ln -s osmogbproxy-usermanual.adoc osmogbproxy-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmogbproxy-usermanual.adoc > osmogbproxy-usermanual.check 2>&1
touch osmogbproxy-usermanual.check
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making check in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ------------------------------------- ##
## osmo-gbproxy 0.5.0.1-0aee test suite. ##
## ------------------------------------- ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-python-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
/usr/local/bin/osmotestvty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmotestvty.py')
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26020/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26020 63.6 0.0 35644 28076 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26021 0.0 0.0 21474909564 16428 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26028 0.0 0.0 2680 1120 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26030 0.0 0.0 3896 1868 ? S 23:58 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48558), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48558), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26020/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26020 4.4 0.0 35644 28140 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26032 0.0 0.0 21474909564 18192 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26039 0.0 0.0 2680 1048 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26041 0.0 0.0 3896 1876 ? S 23:58 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48562), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48562), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26020/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26020 2.3 0.0 35644 28144 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26043 0.0 0.0 21474909564 20208 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26050 0.0 0.0 2680 1160 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26052 0.0 0.0 3896 1952 ? S 23:58 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 4.376s
OK
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48570), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48570), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
/usr/local/bin/osmotestconfig.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmotestconfig.py')
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26054/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26054 57.1 0.0 35592 27896 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26055 0.0 0.0 21474909564 20336 ? S 23:58 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26062 0.0 0.0 2680 1164 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26064 0.0 0.0 3896 1892 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48578), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48578), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf, test write_config
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf'
> ls -l /proc/26054/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26054 4.9 0.0 36912 28192 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26066 16.6 0.0 21474909564 18120 ? S 23:58 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf
build 26073 0.0 0.0 2680 1132 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26075 0.0 0.0 3896 1920 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48584), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48584), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf, test token_vty_command
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf'
> ls -l /proc/26054/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26054 2.5 0.0 36912 28192 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/../.. -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26077 0.0 0.0 21474909564 20040 ? S 23:58 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/writtenconfig/osmo-gbproxy.cfgante3rbf
build 26084 0.0 0.0 2680 1152 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26086 0.0 0.0 3896 1908 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48596), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48596), raddr=('127.0.0.1', 4246)> (0 sockets open)
../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
confpath /build/osmo-gbproxy-0.5.0.1-0aee/tests/.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific VTY commands
testVtyDeletePeer (__main__.TestVTYGbproxy.testVtyDeletePeer) ... Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26088/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26088 50.0 0.0 21204 15920 ? S 23:58 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26089 0.0 0.0 21474909564 20300 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26096 0.0 0.0 2680 1124 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26098 0.0 0.0 3896 1904 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38392), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38392), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyShow (__main__.TestVTYGbproxy.testVtyShow) ... Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26088/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26088 3.1 0.0 21204 15984 ? S 23:58 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26100 14.2 0.0 21474909564 20384 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26107 0.0 0.0 2680 1124 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26109 0.0 0.0 3896 1872 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38396), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38396), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyTree (__main__.TestVTYGbproxy.testVtyTree) ... Launching: PWD=/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26088/fd
total 0
lr-x------ 1 build build 64 Sep 30 23:58 0 -> pipe:[4260582217]
l-wx------ 1 build build 64 Sep 30 23:58 1 -> pipe:[4260582218]
l-wx------ 1 build build 64 Sep 30 23:58 2 -> pipe:[4260582219]
l-wx------ 1 build build 64 Sep 30 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1064 ? Ss 23:57 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1128 ? S 23:57 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23509 0.0 0.0 4068 3180 ? S 23:57 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.0.1-0aee/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.0.1-0aee/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.0.1-0aee.tar.gz osmo-gbproxy-0.5.0.1-0aee.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25794 0.0 0.0 4068 3128 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25897 0.0 0.0 4068 3248 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26088 1.6 0.0 21204 15984 ? S 23:58 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
build 26111 14.2 0.0 21474909564 20348 ? S 23:58 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.0.1-0aee/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26118 0.0 0.0 2680 1124 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 26120 0.0 0.0 3896 1816 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38398), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38398), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
----------------------------------------------------------------------
Ran 3 tests in 4.443s
OK
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make vty-transcript-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg" \
${T:-../../../tests/osmo-gbproxy_test-nodes.vty}
/usr/local/bin/osmo_verify_transcript_vty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmo_verify_transcript_vty.py')
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
% no NRI mappings
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy_test-nodes.vty
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg" \
${T:-../../../tests/osmo-gbproxy-pool_test-nodes.vty}
/usr/local/bin/osmo_verify_transcript_vty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmo_verify_transcript_vty.py')
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00102) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
nri add 1
sgsn nsei 102
nri add 2
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy-pool_test-nodes.vty
rm -f ./sms.db ./gsn_restart
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make ctrl-python-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
../../../tests/ctrl_test_runner.py -w /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub -v
----------------------------------------------------------------------
Ran 0 tests in 0.000s
NO TESTS RAN
confpath /build/osmo-gbproxy-0.5.0.1-0aee/tests/.., workdir /build/osmo-gbproxy-0.5.0.1-0aee/_build/sub
Running tests for specific control commands
GbProxy has no CTRL tests yet
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making installcheck in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making installcheck in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' \
## ------------------------------------- ##
## osmo-gbproxy 0.5.0.1-0aee test suite. ##
## ------------------------------------- ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
( cd '/build/osmo-gbproxy-0.5.0.1-0aee/_inst/' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
( cd '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
( cd '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-23509//build/osmo-gbproxy-0.5.0.1-0aee/_inst/' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
(cd include && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
(cd osmocom && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
(cd gbproxy && make top_distdir=../../../osmo-gbproxy-0.5.0.1-0aee distdir=../../../osmo-gbproxy-0.5.0.1-0aee/include/osmocom/gbproxy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make distdir-am
make[9]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[9]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
(cd src && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
(cd doc && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make \
top_distdir="../../osmo-gbproxy-0.5.0.1-0aee" distdir="../../osmo-gbproxy-0.5.0.1-0aee/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-gbproxy-0.5.0.1-0aee/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-gbproxy-0.5.0.1-0aee distdir=../../osmo-gbproxy-0.5.0.1-0aee/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
(cd tests && make top_distdir=../osmo-gbproxy-0.5.0.1-0aee distdir=../osmo-gbproxy-0.5.0.1-0aee/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make \
top_distdir="osmo-gbproxy-0.5.0.1-0aee" distdir="osmo-gbproxy-0.5.0.1-0aee" \
dist-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
echo 0.5.0.1-0aee > osmo-gbproxy-0.5.0.1-0aee/.tarball-version
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
test -n "" \
|| find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-gbproxy-0.5.0.1-0aee/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-gbproxy-0.5.0.1-0aee"
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
tardir=osmo-gbproxy-0.5.0.1-0aee && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-gbproxy-0.5.0.1-0aee.tar.bz2
tardir=osmo-gbproxy-0.5.0.1-0aee && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip -9 -c >osmo-gbproxy-0.5.0.1-0aee.tar.gz
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making distclean in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
Making distclean in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../../include/osmocom/gbproxy" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmocom" || rm -f
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
rm -f osmo-gbproxy
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test -z "" || rm -f osmo-gbproxy
test . = "../../../src" || rm -f
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/src'
Making distclean in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
rm -f
test . = "../../../../doc/examples" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -rf osmogbproxy-usermanual__*.png osmogbproxy-usermanual__*.svg osmogbproxy-usermanual.check osmogbproxy-usermanual.pdf osmogbproxy-usermanual.html osmogbproxy-vty-reference.pdf osmogbproxy-vty-reference.lint generated ./vty/gbproxy_vty_reference.xml common build generated/.pdf_shrink_marker
test . = "../../../../doc/manuals" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
rm -f
test . = "../../../../contrib/systemd" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/contrib'
Making distclean in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || rm -f
rm -f atconfig
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.0.1-0aee/_build/sub'
if test -d "osmo-gbproxy-0.5.0.1-0aee"; then find "osmo-gbproxy-0.5.0.1-0aee" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.0.1-0aee" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.0.1-0aee"; }; else :; fi
===========================================================
osmo-gbproxy-0.5.0.1-0aee archives ready for distribution:
osmo-gbproxy-0.5.0.1-0aee.tar.gz
osmo-gbproxy-0.5.0.1-0aee.tar.bz2
===========================================================
+ '[' 1 = 1 ']'
+ '[' 1 = 1 ']'
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf
* osmogbproxy-usermanual.pdf: 744K
* osmogbproxy-vty-reference.pdf: 260K
[ -n "osmo-gbproxy" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-gbproxy/master"
cp osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf "_publish_tmpdir/osmo-gbproxy/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-gbproxy" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-gbproxy/
osmo-gbproxy/master/
osmo-gbproxy/master/osmogbproxy-usermanual.pdf
osmo-gbproxy/master/osmogbproxy-vty-reference.pdf
sent 20,206 bytes received 7,620 bytes 55,652.00 bytes/sec
total size is 1,025,101 speedup is 36.84
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmocom
make[2]: Entering directory '/build/include/osmocom'
Making maintainer-clean in gbproxy
make[3]: Entering directory '/build/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/include/osmocom/gbproxy'
make[3]: Entering directory '/build/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/include/osmocom'
rm -f Makefile
make[2]: Leaving directory '/build/include/osmocom'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -f osmo-gbproxy
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test -z "" || rm -f osmo-gbproxy
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2025/
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing bscconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmogbproxy-usermanual.check
Removing doc/manuals/osmogbproxy-usermanual.html
Removing doc/manuals/osmogbproxy-usermanual.pdf
Removing doc/manuals/osmogbproxy-usermanual__1.svg
Removing doc/manuals/osmogbproxy-usermanual__10.svg
Removing doc/manuals/osmogbproxy-usermanual__11.svg
Removing doc/manuals/osmogbproxy-usermanual__12.svg
Removing doc/manuals/osmogbproxy-usermanual__13.svg
Removing doc/manuals/osmogbproxy-usermanual__14.svg
Removing doc/manuals/osmogbproxy-usermanual__15.svg
Removing doc/manuals/osmogbproxy-usermanual__2.svg
Removing doc/manuals/osmogbproxy-usermanual__3.svg
Removing doc/manuals/osmogbproxy-usermanual__4.svg
Removing doc/manuals/osmogbproxy-usermanual__5.svg
Removing doc/manuals/osmogbproxy-usermanual__6.svg
Removing doc/manuals/osmogbproxy-usermanual__7.svg
Removing doc/manuals/osmogbproxy-usermanual__8.svg
Removing doc/manuals/osmogbproxy-usermanual__9.svg
Removing doc/manuals/osmogbproxy-vty-reference.pdf
Removing doc/manuals/vty/gbproxy_vty_reference.xml
Removing include/Makefile.in
Removing include/osmocom/Makefile.in
Removing include/osmocom/gbproxy/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing osmo-gbproxy-0.5.0.1-0aee.tar.bz2
Removing osmo-gbproxy-0.5.0.1-0aee.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/core/version.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/misc_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo-config-merge/Makefile
Removing tests/osmo-config-merge/Makefile.in
Removing tests/osmo-config-merge/atconfig
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins3136896626685532072.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2439654 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk, **/applet.cap". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/166fa6d8/images/svgs/logo.svg){kind=logo}
