Skip to content
Failed

Console Output

Skipping 1,467 KB.. Full Log
15:51:46.120784 tst                  mo_mt_call.py:8: Test FAILED (6.2 sec)
15:51:46.152682 run   osmo-hlr_10.42.42.2(pid=25116): ERR: Terminated: ERROR {rc=237}  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call.py↪mo_mt_call.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25116)]
15:51:46.207276 run   osmo-hlr_10.42.42.2(pid=25116): stdout: 
| (launched: 2022-12-12_15:51:43.211960) 
15:51:46.262401 run   osmo-hlr_10.42.42.2(pid=25116): stderr: 
| 20221212155143392 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155143392 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155143392 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155143392 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155143392 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155143392 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155143404 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/mo_mt_call.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155143412 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155143412 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155143412 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:51:46.338406 run   osmo-msc_10.42.42.6(pid=25122): ERR: Terminated: ERROR {rc=2}  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call.py↪mo_mt_call.py↪osmo-msc_10.42.42.6↪osmo-msc_10.42.42.6(pid=25122)]
15:51:46.392188 run   osmo-msc_10.42.42.6(pid=25122): stdout: 
| (launched: 2022-12-12_15:51:45.172666) 
15:51:46.447039 run   osmo-msc_10.42.42.6(pid=25122): stderr: 
| 20221212155145448 DLSS7 DEBUG XUA_ASP(asp0)[0x612000004a20]{ASP_DOWN}: Allocated (fsm.c:456)
| 20221212155145448 DLGLOBAL DEBUG validating counter group 0x7fe29e8d2c40(sigtran_as) with 2 counters (rate_ctr.c:87)
| 20221212155145448 DLSS7 DEBUG XUA_AS(as0)[0x612000004d20]{AS_DOWN}: Allocated (fsm.c:456)
| 20221212155145448 DLSS7 INFO 0: as-as0: Created AS (osmo_ss7.c:1034)
| 20221212155145449 DLSS7 INFO 0: as-as0: Adding ASP asp0 to AS (osmo_ss7.c:1054)
| 20221212155145449 DLSS7 INFO 0: Creating route: pc=1=0.0.1 mask=0x3fff via AS 'as0' (osmo_ss7.c:831)
| 20221212155145450 DMNCC DEBUG Using internal MNCC handler. (msc_main.c:678)
| 20221212155145451 DLGLOBAL ERROR unable to bind socket:10.42.42.6:4254: Address already in use (socket.c:935)
| 20221212155145451 DLGLOBAL ERROR no suitable addr found for: 10.42.42.6:4254 (socket.c:946)
| 20221212155145451 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.6 4254 (telnet_interface.c:99) 
15:51:46.501936 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25115): Terminating (SIGTERM)
15:51:46.547593 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25118): Terminating (SIGTERM)
15:51:46.595392 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25121): Terminating (SIGTERM)
15:51:46.642367 ---      ParallelTerminationStrategy: PID 25115 died...
15:51:46.663758 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25115): Terminated: ok {rc=0}
15:51:46.715623 ---      ParallelTerminationStrategy: PID 25118 died...
15:51:46.736556 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25118): Terminated: ok {rc=0}
15:51:46.788718 ---      ParallelTerminationStrategy: PID 25121 died...
15:51:46.811935 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25121): Terminated: ok {rc=0}
15:51:46.915760 bus                        /sierra_3: Setting Powered False
15:51:48.021928 bus                        /sierra_3: Setting Powered False
15:51:49.136437 bus                        /sierra_2: Setting Powered False

----------------------------------------------
trial-2378 voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend mo_mt_call_osmux.py
----------------------------------------------
15:51:50.283799 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.295880 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
15:51:50.347341 tst              mo_mt_call_osmux.py: using LAC 29919
15:51:50.470669 tst              mo_mt_call_osmux.py: using RAC 84
15:51:50.593179 tst              mo_mt_call_osmux.py: using CellId 29919
15:51:50.715201 tst              mo_mt_call_osmux.py: using BVCI 29920
15:51:50.828683 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.840085 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.851250 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.862393 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.873587 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 6)
15:51:50.884663 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 2)
15:51:51.003802 tst voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 2)
15:51:51.124746 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:51:51.607805 run         create_hlr_db(pid=25124): Launched
15:51:51.735169 bus                        /sierra_2: Setting Powered False
15:51:52.796878 run         create_hlr_db(pid=25124): Terminated: ok {rc=0}
15:51:53.251820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25126): Launched
15:51:53.588630 run   osmo-hlr_10.42.42.2(pid=25127): Launched
15:51:53.715402 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:51:54.295236 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25129): Launched
15:51:54.631390 run   osmo-stp_10.42.42.5(pid=25130): Launched
15:51:54.758185 run              osmo-msc_10.42.42.6: Starting osmo-msc
15:51:55.360405 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25132): Launched
15:51:55.696755 run   osmo-msc_10.42.42.6(pid=25133): Launched
15:51:55.880343 run   osmo-stp_10.42.42.5(pid=25130): ERR: Terminated: ERROR {rc=1}  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call_osmux.py:8↪mo_mt_call_osmux.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25130)]
15:51:56.022252 run   osmo-stp_10.42.42.5(pid=25130): stdout: 
| (launched: 2022-12-12_15:51:54.567525)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:51:56.161764 run   osmo-stp_10.42.42.5(pid=25130): stderr: 
| 20221212155154759 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155154759 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155154759 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155154759 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155154760 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155154760 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155154760 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:51:56.294541 run   osmo-stp_10.42.42.5(pid=25130): stdout: 
| (launched: 2022-12-12_15:51:54.567525)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:51:56.416892 run   osmo-stp_10.42.42.5(pid=25130): stderr: 
| 20221212155154759 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155154759 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155154759 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155154759 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155154760 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155154760 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155154760 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:51:56.563226 tst            mo_mt_call_osmux.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25130): Process ended prematurely: osmo-stp_10.42.42.5(pid=25130) [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call_osmux.py:8↪mo_mt_call_osmux.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25130)]  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call_osmux.py:8]
15:51:56.572532 tst            mo_mt_call_osmux.py:8: Test FAILED (6.3 sec)
15:51:56.598778 run   osmo-hlr_10.42.42.2(pid=25127): ERR: Terminated: ERROR {rc=237}  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call_osmux.py↪mo_mt_call_osmux.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25127)]
15:51:56.646267 run   osmo-hlr_10.42.42.2(pid=25127): stdout: 
| (launched: 2022-12-12_15:51:53.525330) 
15:51:56.695453 run   osmo-hlr_10.42.42.2(pid=25127): stderr: 
| 20221212155153721 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155153721 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155153721 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155153721 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155153721 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155153721 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155153733 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/mo_mt_call_osmux.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155153742 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155153742 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155153742 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:51:56.764186 run   osmo-msc_10.42.42.6(pid=25133): ERR: Terminated: ERROR {rc=2}  [trial-2378↪voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪mo_mt_call_osmux.py↪mo_mt_call_osmux.py↪osmo-msc_10.42.42.6↪osmo-msc_10.42.42.6(pid=25133)]
15:51:56.811701 run   osmo-msc_10.42.42.6(pid=25133): stdout: 
| (launched: 2022-12-12_15:51:55.632701) 
15:51:56.861068 run   osmo-msc_10.42.42.6(pid=25133): stderr: 
| 20221212155155953 DLSS7 DEBUG XUA_ASP(asp0)[0x612000004a20]{ASP_DOWN}: Allocated (fsm.c:456)
| 20221212155155954 DLGLOBAL DEBUG validating counter group 0x7f3be9909c40(sigtran_as) with 2 counters (rate_ctr.c:87)
| 20221212155155954 DLSS7 DEBUG XUA_AS(as0)[0x612000004d20]{AS_DOWN}: Allocated (fsm.c:456)
| 20221212155155954 DLSS7 INFO 0: as-as0: Created AS (osmo_ss7.c:1034)
| 20221212155155954 DLSS7 INFO 0: as-as0: Adding ASP asp0 to AS (osmo_ss7.c:1054)
| 20221212155155954 DLSS7 INFO 0: Creating route: pc=1=0.0.1 mask=0x3fff via AS 'as0' (osmo_ss7.c:831)
| 20221212155155956 DMNCC DEBUG Using internal MNCC handler. (msc_main.c:678)
| 20221212155155956 DLGLOBAL ERROR unable to bind socket:10.42.42.6:4254: Address already in use (socket.c:935)
| 20221212155155956 DLGLOBAL ERROR no suitable addr found for: 10.42.42.6:4254 (socket.c:946)
| 20221212155155956 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.6 4254 (telnet_interface.c:99) 
15:51:56.910485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25126): Terminating (SIGTERM)
15:51:56.950007 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25129): Terminating (SIGTERM)
15:51:56.989545 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25132): Terminating (SIGTERM)
15:51:57.029895 ---      ParallelTerminationStrategy: PID 25126 died...
15:51:57.048587 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25126): Terminated: ok {rc=0}
15:51:57.092616 ---      ParallelTerminationStrategy: PID 25129 died...
15:51:57.111187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25129): Terminated: ok {rc=0}
15:51:57.154686 ---      ParallelTerminationStrategy: PID 25132 died...
15:51:57.173119 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25132): Terminated: ok {rc=0}
15:51:57.259069 bus                        /sierra_3: Setting Powered False
15:51:58.360622 bus                        /sierra_3: Setting Powered False
15:51:59.477085 bus                        /sierra_2: Setting Powered False
---------------------------------------------------------------------
trial-2378 voice:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend FAIL
---------------------------------------------------------------------

---------------------------------------------------------------------
trial-2378 emergency:trx-b200
---------------------------------------------------------------------
15:52:00.727697 tst               emergency:trx-b200: reserving resources in /var/tmp/osmo-gsm-tester/state ...
15:52:00.732897 tst               emergency:trx-b200: Verifying 1 x bts (candidates: 11)
15:52:00.766646 tst               emergency:trx-b200: Verifying 6 x ip_address (candidates: 9)
15:52:00.793240 tst               emergency:trx-b200: Verifying 4 x modem (candidates: 12)
15:52:00.890609 tst               emergency:trx-b200: Reserving 1 x bts (candidates: 11)
15:52:00.934527 tst               emergency:trx-b200: Reserving 6 x ip_address (candidates: 9)
15:52:00.969969 tst               emergency:trx-b200: Reserving 4 x modem (candidates: 12)
15:52:01.531069 tst               emergency:trx-b200: RESERVED RESOURCES for emergency:
bts
  Ettus B200
ip_address
  10.42.42.2
  10.42.42.3
  10.42.42.4
  10.42.42.5
  10.42.42.6
  10.42.42.7
modem
  sierra_1st
  sierra_2nd
  sierra_3rd
  sierra_4th

----------------------------------------------
trial-2378 emergency:trx-b200 emergency_mo_mt_call.py
----------------------------------------------
15:52:01.536396 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:01.548201 tst               emergency:trx-b200: Using 1 x bts (candidates: 1)
15:52:01.597400 tst          emergency_mo_mt_call.py: using LAC 29920
15:52:01.731067 tst          emergency_mo_mt_call.py: using RAC 85
15:52:01.901229 tst          emergency_mo_mt_call.py: using CellId 29920
15:52:02.024192 tst          emergency_mo_mt_call.py: using BVCI 29921
15:52:02.170036 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:02.183562 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:02.196124 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:02.211175 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:02.224605 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:02.236832 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:02.361761 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:02.480616 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:52:02.954059 run         create_hlr_db(pid=25138): Launched
15:52:03.079111 bus                        /sierra_2: Setting Powered False
15:52:04.140173 run         create_hlr_db(pid=25138): Terminated: ok {rc=0}
15:52:04.589160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25140): Launched
15:52:04.920061 run   osmo-hlr_10.42.42.2(pid=25141): Launched
15:52:05.044896 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:52:05.610182 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25143): Launched
15:52:05.941661 run   osmo-stp_10.42.42.5(pid=25144): Launched
15:52:06.076167 tst          emergency_mo_mt_call.py: using MSISDN 7856
15:52:06.246819 run              osmo-msc_10.42.42.6: Starting osmo-msc
15:52:06.837231 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25146): Launched
15:52:07.165706 run   osmo-msc_10.42.42.6(pid=25147): Launched
15:52:07.347348 run   osmo-stp_10.42.42.5(pid=25144): ERR: Terminated: ERROR {rc=1}  [trial-2378↪emergency:trx-b200↪emergency_mo_mt_call.py:19↪emergency_mo_mt_call.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25144)]
15:52:07.483885 run   osmo-stp_10.42.42.5(pid=25144): stdout: 
| (launched: 2022-12-12_15:52:05.878358)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:07.620623 run   osmo-stp_10.42.42.5(pid=25144): stderr: 
| 20221212155206071 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155206071 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155206072 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155206072 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155206072 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155206073 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155206073 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:07.756889 run   osmo-stp_10.42.42.5(pid=25144): stdout: 
| (launched: 2022-12-12_15:52:05.878358)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:07.886042 run   osmo-stp_10.42.42.5(pid=25144): stderr: 
| 20221212155206071 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155206071 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155206072 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155206072 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155206072 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155206073 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155206073 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:08.040562 tst       emergency_mo_mt_call.py:19: ERR: Error: osmo-stp_10.42.42.5(pid=25144): Process ended prematurely: osmo-stp_10.42.42.5(pid=25144) [trial-2378↪emergency:trx-b200↪emergency_mo_mt_call.py:19↪emergency_mo_mt_call.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25144)]  [trial-2378↪emergency:trx-b200↪emergency_mo_mt_call.py:19]
15:52:08.050068 tst       emergency_mo_mt_call.py:19: Test FAILED (6.5 sec)
15:52:08.078129 run   osmo-hlr_10.42.42.2(pid=25141): ERR: Terminated: ERROR {rc=237}  [trial-2378↪emergency:trx-b200↪emergency_mo_mt_call.py↪emergency_mo_mt_call.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25141)]
15:52:08.128281 run   osmo-hlr_10.42.42.2(pid=25141): stdout: 
| (launched: 2022-12-12_15:52:04.857262) 
15:52:08.180055 run   osmo-hlr_10.42.42.2(pid=25141): stderr: 
| 20221212155205055 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155205055 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155205055 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155205055 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155205055 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155205055 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155205067 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/emergency:trx-b200/emergency_mo_mt_call.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155205077 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155205077 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155205077 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:52:08.252097 run   osmo-msc_10.42.42.6(pid=25147): ERR: Terminated: ERROR {rc=2}  [trial-2378↪emergency:trx-b200↪emergency_mo_mt_call.py↪emergency_mo_mt_call.py↪osmo-msc_10.42.42.6↪osmo-msc_10.42.42.6(pid=25147)]
15:52:08.302259 run   osmo-msc_10.42.42.6(pid=25147): stdout: 
| (launched: 2022-12-12_15:52:07.102666) 
15:52:08.354381 run   osmo-msc_10.42.42.6(pid=25147): stderr: 
| 20221212155207425 DLSS7 DEBUG XUA_ASP(asp0)[0x6120000048a0]{ASP_DOWN}: Allocated (fsm.c:456)
| 20221212155207425 DLGLOBAL DEBUG validating counter group 0x7f40b6b45c40(sigtran_as) with 2 counters (rate_ctr.c:87)
| 20221212155207425 DLSS7 DEBUG XUA_AS(as0)[0x612000004ba0]{AS_DOWN}: Allocated (fsm.c:456)
| 20221212155207425 DLSS7 INFO 0: as-as0: Created AS (osmo_ss7.c:1034)
| 20221212155207426 DLSS7 INFO 0: as-as0: Adding ASP asp0 to AS (osmo_ss7.c:1054)
| 20221212155207426 DLSS7 INFO 0: Creating route: pc=1=0.0.1 mask=0x3fff via AS 'as0' (osmo_ss7.c:831)
| 20221212155207427 DMNCC DEBUG Using internal MNCC handler. (msc_main.c:678)
| 20221212155207428 DLGLOBAL ERROR unable to bind socket:10.42.42.6:4254: Address already in use (socket.c:935)
| 20221212155207428 DLGLOBAL ERROR no suitable addr found for: 10.42.42.6:4254 (socket.c:946)
| 20221212155207428 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.6 4254 (telnet_interface.c:99) 
15:52:08.406449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25140): Terminating (SIGTERM)
15:52:08.448645 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25143): Terminating (SIGTERM)
15:52:08.490871 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25146): Terminating (SIGTERM)
15:52:08.533350 ---      ParallelTerminationStrategy: PID 25140 died...
15:52:08.553514 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25140): Terminated: ok {rc=0}
15:52:08.600379 ---      ParallelTerminationStrategy: PID 25143 died...
15:52:08.620071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25143): Terminated: ok {rc=0}
15:52:08.666715 ---      ParallelTerminationStrategy: PID 25146 died...
15:52:08.686380 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25146): Terminated: ok {rc=0}
15:52:08.775302 bus                        /sierra_3: Setting Powered False
15:52:09.875111 bus                        /sierra_3: Setting Powered False
15:52:10.991147 bus                        /sierra_2: Setting Powered False

----------------------------------------------
trial-2378 emergency:trx-b200 emergency_preemptive_call.py
----------------------------------------------
15:52:12.079596 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.091956 tst               emergency:trx-b200: Using 1 x bts (candidates: 1)
15:52:12.145927 tst     emergency_preemptive_call.py: using LAC 29921
15:52:12.273634 tst     emergency_preemptive_call.py: using RAC 86
15:52:12.395631 tst     emergency_preemptive_call.py: using CellId 29921
15:52:12.515043 tst     emergency_preemptive_call.py: using BVCI 29922
15:52:12.624113 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.635244 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.646160 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.656914 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.667565 tst               emergency:trx-b200: Using 1 x ip_address (candidates: 6)
15:52:12.678172 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:12.797977 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:12.918524 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:13.034743 tst               emergency:trx-b200: Using 1 x modem (candidates: 4)
15:52:13.152528 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:52:13.631212 run         create_hlr_db(pid=25149): Launched
15:52:13.755380 bus                        /sierra_2: Setting Powered False
15:52:14.815517 run         create_hlr_db(pid=25149): Terminated: ok {rc=0}
15:52:15.242024 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25151): Launched
15:52:15.548588 run   osmo-hlr_10.42.42.2(pid=25152): Launched
15:52:15.664587 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:52:16.223187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25154): Launched
15:52:16.573652 run   osmo-stp_10.42.42.5(pid=25155): Launched
15:52:16.854717 tst     emergency_preemptive_call.py: using MSISDN 7857
15:52:17.061000 run              osmo-msc_10.42.42.6: Starting osmo-msc
15:52:17.612806 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25157): Launched
15:52:17.922099 run   osmo-msc_10.42.42.6(pid=25158): Launched
15:52:18.089597 run   osmo-stp_10.42.42.5(pid=25155): ERR: Terminated: ERROR {rc=1}  [trial-2378↪emergency:trx-b200↪emergency_preemptive_call.py:32↪emergency_preemptive_call.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25155)]
15:52:18.217114 run   osmo-stp_10.42.42.5(pid=25155): stdout: 
| (launched: 2022-12-12_15:52:16.507236)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:18.344813 run   osmo-stp_10.42.42.5(pid=25155): stderr: 
| 20221212155216738 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155216738 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155216738 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155216739 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155216739 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155216739 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155216740 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:18.471677 run   osmo-stp_10.42.42.5(pid=25155): stdout: 
| (launched: 2022-12-12_15:52:16.507236)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:18.592072 run   osmo-stp_10.42.42.5(pid=25155): stderr: 
| 20221212155216738 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155216738 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155216738 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155216739 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155216739 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155216739 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155216740 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:18.736194 tst  emergency_preemptive_call.py:32: ERR: Error: osmo-stp_10.42.42.5(pid=25155): Process ended prematurely: osmo-stp_10.42.42.5(pid=25155) [trial-2378↪emergency:trx-b200↪emergency_preemptive_call.py:32↪emergency_preemptive_call.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25155)]  [trial-2378↪emergency:trx-b200↪emergency_preemptive_call.py:32]
15:52:18.744914 tst  emergency_preemptive_call.py:32: Test FAILED (6.7 sec)
15:52:18.771650 run   osmo-hlr_10.42.42.2(pid=25152): ERR: Terminated: ERROR {rc=237}  [trial-2378↪emergency:trx-b200↪emergency_preemptive_call.py↪emergency_preemptive_call.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25152)]
15:52:18.819651 run   osmo-hlr_10.42.42.2(pid=25152): stdout: 
| (launched: 2022-12-12_15:52:15.489305) 
15:52:18.869605 run   osmo-hlr_10.42.42.2(pid=25152): stderr: 
| 20221212155215669 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155215669 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155215669 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155215669 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155215669 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155215669 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155215681 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/emergency:trx-b200/emergency_preemptive_call.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155215690 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155215691 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155215691 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:52:18.939279 run   osmo-msc_10.42.42.6(pid=25158): ERR: Terminated: ERROR {rc=2}  [trial-2378↪emergency:trx-b200↪emergency_preemptive_call.py↪emergency_preemptive_call.py↪osmo-msc_10.42.42.6↪osmo-msc_10.42.42.6(pid=25158)]
15:52:18.987364 run   osmo-msc_10.42.42.6(pid=25158): stdout: 
| (launched: 2022-12-12_15:52:17.862528) 
15:52:19.036890 run   osmo-msc_10.42.42.6(pid=25158): stderr: 
| 20221212155218141 DLSS7 DEBUG XUA_ASP(asp0)[0x6120000048a0]{ASP_DOWN}: Allocated (fsm.c:456)
| 20221212155218141 DLGLOBAL DEBUG validating counter group 0x7fb545cb4c40(sigtran_as) with 2 counters (rate_ctr.c:87)
| 20221212155218141 DLSS7 DEBUG XUA_AS(as0)[0x612000004ba0]{AS_DOWN}: Allocated (fsm.c:456)
| 20221212155218141 DLSS7 INFO 0: as-as0: Created AS (osmo_ss7.c:1034)
| 20221212155218141 DLSS7 INFO 0: as-as0: Adding ASP asp0 to AS (osmo_ss7.c:1054)
| 20221212155218142 DLSS7 INFO 0: Creating route: pc=1=0.0.1 mask=0x3fff via AS 'as0' (osmo_ss7.c:831)
| 20221212155218143 DMNCC DEBUG Using internal MNCC handler. (msc_main.c:678)
| 20221212155218144 DLGLOBAL ERROR unable to bind socket:10.42.42.6:4254: Address already in use (socket.c:935)
| 20221212155218144 DLGLOBAL ERROR no suitable addr found for: 10.42.42.6:4254 (socket.c:946)
| 20221212155218144 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.6 4254 (telnet_interface.c:99) 
15:52:19.086726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25151): Terminating (SIGTERM)
15:52:19.126892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25154): Terminating (SIGTERM)
15:52:19.167067 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25157): Terminating (SIGTERM)
15:52:19.207456 ---      ParallelTerminationStrategy: PID 25151 died...
15:52:19.226771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25151): Terminated: ok {rc=0}
15:52:19.271620 ---      ParallelTerminationStrategy: PID 25154 died...
15:52:19.290490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25154): Terminated: ok {rc=0}
15:52:19.334899 ---      ParallelTerminationStrategy: PID 25157 died...
15:52:19.353806 run pcap-recorder_any(filters='host 10.42.42.6 and port not 22')(pid=25157): Terminated: ok {rc=0}
15:52:19.440475 bus                        /sierra_9: Setting Powered False
15:52:20.541226 bus                        /sierra_9: Setting Powered False
15:52:21.655990 bus                        /sierra_8: Setting Powered False
15:52:22.755400 bus                        /sierra_8: Setting Powered False
15:52:23.872137 bus                        /sierra_3: Setting Powered False
15:52:24.970801 bus                        /sierra_3: Setting Powered False
15:52:26.088454 bus                        /sierra_2: Setting Powered False
---------------------------------------------------------------------
trial-2378 emergency:trx-b200 FAIL
---------------------------------------------------------------------

---------------------------------------------------------------------
trial-2378 gprs:trx-b200
---------------------------------------------------------------------
15:52:27.377157 tst                    gprs:trx-b200: reserving resources in /var/tmp/osmo-gsm-tester/state ...
15:52:27.382444 tst                    gprs:trx-b200: Verifying 1 x bts (candidates: 11)
15:52:27.419891 tst                    gprs:trx-b200: Verifying 9 x ip_address (candidates: 9)
15:52:27.459732 tst                    gprs:trx-b200: Verifying 4 x modem (candidates: 12)
15:52:27.547899 tst                    gprs:trx-b200: Reserving 1 x bts (candidates: 11)
15:52:27.580543 tst                    gprs:trx-b200: Reserving 9 x ip_address (candidates: 9)
15:52:27.618593 tst                    gprs:trx-b200: Reserving 4 x modem (candidates: 12)
15:52:28.209036 tst                    gprs:trx-b200: RESERVED RESOURCES for gprs:
bts
  Ettus B200
ip_address
  10.42.42.2
  10.42.42.3
  10.42.42.4
  10.42.42.5
  10.42.42.6
  10.42.42.7
  10.42.42.8
  10.42.42.9
  10.42.42.10
modem
  ec20_1
  ec20_2
  ec20_3
  ec20_4

----------------------------------------------
trial-2378 gprs:trx-b200 cs_paging_gprs_active.py
----------------------------------------------
15:52:28.258885 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.269874 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
15:52:28.316379 tst         cs_paging_gprs_active.py: using LAC 29922
15:52:28.436397 tst         cs_paging_gprs_active.py: using RAC 87
15:52:28.555172 tst         cs_paging_gprs_active.py: using CellId 29922
15:52:28.676206 tst         cs_paging_gprs_active.py: using BVCI 29923
15:52:28.787669 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.798429 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.808730 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.819185 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.829507 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.839781 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.850289 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.860622 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:28.871131 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:28.985882 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:29.105685 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
15:52:29.329911 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:29.664885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25163): Launched
15:52:29.956117 run iperf3-srv_10.42.42.10(pid=25164): Launched
15:52:30.082090 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
15:52:30.305606 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:30.642026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25165): Launched
15:52:30.965671 run iperf3-srv_10.42.42.10(pid=25166): Launched
15:52:31.115226 tst      cs_paging_gprs_active.py:38: start network...
15:52:31.328805 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:52:31.827898 run         create_hlr_db(pid=25167): Launched
15:52:31.979220 bus                        /sierra_2: Setting Powered False
15:52:33.043714 run         create_hlr_db(pid=25167): Terminated: ok {rc=0}
15:52:33.491480 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25169): Launched
15:52:33.804407 run   osmo-hlr_10.42.42.2(pid=25170): Launched
15:52:33.922113 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:52:34.460063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25172): Launched
15:52:34.773196 run   osmo-stp_10.42.42.5(pid=25173): Launched
15:52:34.890480 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:52:35.426346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25175): Launched
15:52:35.546442 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:52:35.811803 run              patchelf(pid=25176): Launched
15:52:35.986152 run   osmo-stp_10.42.42.5(pid=25173): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25173)]
15:52:36.116881 run   osmo-stp_10.42.42.5(pid=25173): stdout: 
| (launched: 2022-12-12_15:52:34.712361)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:36.249736 run   osmo-stp_10.42.42.5(pid=25173): stderr: 
| 20221212155234888 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155234888 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155234888 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155234888 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155234889 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155234889 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155234889 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:36.382471 run   osmo-stp_10.42.42.5(pid=25173): stdout: 
| (launched: 2022-12-12_15:52:34.712361)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:36.509512 run   osmo-stp_10.42.42.5(pid=25173): stderr: 
| 20221212155234888 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155234888 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155234888 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155234888 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155234889 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155234889 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155234889 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:36.658889 run              patchelf(pid=25176): Terminating (SIGINT)
15:52:36.831992 run              patchelf(pid=25176): Terminated: ok {rc=0}
15:52:36.956829 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25173): Process ended prematurely: osmo-stp_10.42.42.5(pid=25173) [trial-2378↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25173)]  [trial-2378↪gprs:trx-b200↪cs_paging_gprs_active.py:38]
15:52:36.966371 tst      cs_paging_gprs_active.py:38: Test FAILED (8.7 sec)
15:52:36.993336 run   osmo-hlr_10.42.42.2(pid=25170): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25170)]
15:52:37.040330 run   osmo-hlr_10.42.42.2(pid=25170): stdout: 
| (launched: 2022-12-12_15:52:33.743902) 
15:52:37.089318 run   osmo-hlr_10.42.42.2(pid=25170): stderr: 
| 20221212155233923 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155233924 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155233924 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155233924 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155233924 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155233924 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155233936 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155233944 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155233944 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155233944 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:52:37.138693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25163): Terminating (SIGTERM)
15:52:37.178280 run iperf3-srv_10.42.42.10(pid=25164): Terminating (SIGTERM)
15:52:37.217811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25165): Terminating (SIGTERM)
15:52:37.257247 run iperf3-srv_10.42.42.10(pid=25166): Terminating (SIGTERM)
15:52:37.296457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25169): Terminating (SIGTERM)
15:52:37.336113 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25172): Terminating (SIGTERM)
15:52:37.375806 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25175): Terminating (SIGTERM)
15:52:37.415797 ---      ParallelTerminationStrategy: PID 25163 died...
15:52:37.434986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25163): Terminated: ok {rc=0}
15:52:37.479100 ---      ParallelTerminationStrategy: PID 25164 died...
15:52:37.497741 run iperf3-srv_10.42.42.10(pid=25164): Terminated {rc=256}
15:52:37.541038 ---      ParallelTerminationStrategy: PID 25165 died...
15:52:37.559332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25165): Terminated: ok {rc=0}
15:52:37.602817 ---      ParallelTerminationStrategy: PID 25166 died...
15:52:37.621343 run iperf3-srv_10.42.42.10(pid=25166): Terminated {rc=256}
15:52:37.664656 ---      ParallelTerminationStrategy: PID 25169 died...
15:52:37.683284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25169): Terminated: ok {rc=0}
15:52:37.726701 ---      ParallelTerminationStrategy: PID 25172 died...
15:52:37.745177 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25172): Terminated: ok {rc=0}
15:52:37.788733 ---      ParallelTerminationStrategy: PID 25175 died...
15:52:37.807491 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25175): Terminated: ok {rc=0}
15:52:37.893797 bus                          /gobi_0: Setting Powered False
15:52:38.995709 bus                          /gobi_0: Setting Powered False
15:52:40.111105 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200 iperf3.py
----------------------------------------------
15:52:41.258003 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.269644 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
15:52:41.325576 tst                        iperf3.py: using LAC 29923
15:52:41.446249 tst                        iperf3.py: using RAC 88
15:52:41.568329 tst                        iperf3.py: using CellId 29923
15:52:41.689464 tst                        iperf3.py: using BVCI 29924
15:52:41.803561 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.814417 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.824876 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.835458 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.845928 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.856280 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.867317 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.877884 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:41.888591 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:42.007144 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
15:52:42.231599 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:42.568158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25177): Launched
15:52:42.859882 run iperf3-srv_10.42.42.10(pid=25178): Launched
15:52:42.983849 tst                      iperf3.py:8: start network...
15:52:43.207381 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:52:43.723592 run         create_hlr_db(pid=25179): Launched
15:52:43.851660 bus                          /gobi_6: Setting Powered False
15:52:44.915887 run         create_hlr_db(pid=25179): Terminated: ok {rc=0}
15:52:45.360630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25181): Launched
15:52:45.674811 run   osmo-hlr_10.42.42.2(pid=25182): Launched
15:52:45.792230 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:52:46.521362 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25184): Launched
15:52:46.849337 run   osmo-stp_10.42.42.5(pid=25185): Launched
15:52:47.069153 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:52:47.669564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25187): Launched
15:52:47.787715 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:52:48.053410 run              patchelf(pid=25188): Launched
15:52:48.226264 run   osmo-stp_10.42.42.5(pid=25185): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25185)]
15:52:48.357070 run   osmo-stp_10.42.42.5(pid=25185): stdout: 
| (launched: 2022-12-12_15:52:46.788150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:48.489269 run   osmo-stp_10.42.42.5(pid=25185): stderr: 
| 20221212155247175 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155247175 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155247178 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155247179 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155247182 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155247182 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155247182 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:48.621953 run   osmo-stp_10.42.42.5(pid=25185): stdout: 
| (launched: 2022-12-12_15:52:46.788150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:52:48.748082 run   osmo-stp_10.42.42.5(pid=25185): stderr: 
| 20221212155247175 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155247175 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155247178 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155247179 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155247182 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155247182 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155247182 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:52:48.898154 run              patchelf(pid=25188): Terminating (SIGINT)
15:52:49.071621 run              patchelf(pid=25188): Terminated: ok {rc=0}
15:52:49.196727 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25185): Process ended prematurely: osmo-stp_10.42.42.5(pid=25185) [trial-2378↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25185)]  [trial-2378↪gprs:trx-b200↪iperf3.py:8]
15:52:49.206326 tst                      iperf3.py:8: Test FAILED (8.0 sec)
15:52:49.233579 run   osmo-hlr_10.42.42.2(pid=25182): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25182)]
15:52:49.280734 run   osmo-hlr_10.42.42.2(pid=25182): stdout: 
| (launched: 2022-12-12_15:52:45.614563) 
15:52:49.330152 run   osmo-hlr_10.42.42.2(pid=25182): stderr: 
| 20221212155245796 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155245796 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155245796 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155245796 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155245796 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155245796 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155245808 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155245817 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155245817 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155245817 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:52:49.379575 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25177): Terminating (SIGTERM)
15:52:49.419206 run iperf3-srv_10.42.42.10(pid=25178): Terminating (SIGTERM)
15:52:49.460393 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25181): Terminating (SIGTERM)
15:52:49.500470 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25184): Terminating (SIGTERM)
15:52:49.540069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25187): Terminating (SIGTERM)
15:52:49.580011 ---      ParallelTerminationStrategy: PID 25177 died...
15:52:49.599335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25177): Terminated: ok {rc=0}
15:52:49.643406 ---      ParallelTerminationStrategy: PID 25178 died...
15:52:49.661941 run iperf3-srv_10.42.42.10(pid=25178): Terminated {rc=256}
15:52:49.705648 ---      ParallelTerminationStrategy: PID 25181 died...
15:52:49.724265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25181): Terminated: ok {rc=0}
15:52:49.767944 ---      ParallelTerminationStrategy: PID 25184 died...
15:52:49.786626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25184): Terminated: ok {rc=0}
15:52:49.830568 ---      ParallelTerminationStrategy: PID 25187 died...
15:52:49.849319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25187): Terminated: ok {rc=0}
15:52:49.933923 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200 iperf3m4.py
----------------------------------------------
15:52:51.086348 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.099038 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
15:52:51.149762 tst                      iperf3m4.py: using LAC 29924
15:52:51.279373 tst                      iperf3m4.py: using RAC 89
15:52:51.409367 tst                      iperf3m4.py: using CellId 29924
15:52:51.539058 tst                      iperf3m4.py: using BVCI 29925
15:52:51.661054 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.672417 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.683435 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.694858 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.706126 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.717428 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.728832 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.740206 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:52:51.751643 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:51.875574 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:52.001327 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:52.117964 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:52:52.237152 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
15:52:52.445809 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:52.760638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25189): Launched
15:52:53.035840 run iperf3-srv_10.42.42.10(pid=25190): Launched
15:52:53.152000 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
15:52:53.359005 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:53.673225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25191): Launched
15:52:53.947669 run iperf3-srv_10.42.42.10(pid=25192): Launched
15:52:54.064089 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
15:52:54.270469 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:54.584030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25193): Launched
15:52:54.857187 run iperf3-srv_10.42.42.10(pid=25194): Launched
15:52:54.973791 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
15:52:55.179373 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:52:55.492883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25195): Launched
15:52:55.766142 run iperf3-srv_10.42.42.10(pid=25196): Launched
15:52:55.884261 tst                    iperf3m4.py:8: start network...
15:52:56.091917 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:52:56.574439 run         create_hlr_db(pid=25197): Launched
15:52:56.702288 bus                          /gobi_6: Setting Powered False
15:52:57.763619 run         create_hlr_db(pid=25197): Terminated: ok {rc=0}
15:52:58.219036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25199): Launched
15:52:58.556833 run   osmo-hlr_10.42.42.2(pid=25200): Launched
15:52:58.683672 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:52:59.261555 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25202): Launched
15:52:59.598250 run   osmo-stp_10.42.42.5(pid=25203): Launched
15:52:59.724893 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:53:00.301508 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25205): Launched
15:53:00.430673 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:53:00.714734 run              patchelf(pid=25206): Launched
15:53:00.908432 run   osmo-stp_10.42.42.5(pid=25203): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25203)]
15:53:01.052506 run   osmo-stp_10.42.42.5(pid=25203): stdout: 
| (launched: 2022-12-12_15:52:59.534042)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:01.197792 run   osmo-stp_10.42.42.5(pid=25203): stderr: 
| 20221212155259725 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155259725 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155259725 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155259726 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155259726 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155259726 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155259726 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:01.344219 run   osmo-stp_10.42.42.5(pid=25203): stdout: 
| (launched: 2022-12-12_15:52:59.534042)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:01.483937 run   osmo-stp_10.42.42.5(pid=25203): stderr: 
| 20221212155259725 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155259725 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155259725 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155259726 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155259726 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155259726 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155259726 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:01.649772 run              patchelf(pid=25206): Terminating (SIGINT)
15:53:01.840223 run              patchelf(pid=25206): Terminated: ok {rc=0}
15:53:01.977747 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25203): Process ended prematurely: osmo-stp_10.42.42.5(pid=25203) [trial-2378↪gprs:trx-b200↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25203)]  [trial-2378↪gprs:trx-b200↪iperf3m4.py:8]
15:53:01.989341 tst                    iperf3m4.py:8: Test FAILED (10.9 sec)
15:53:02.023675 run   osmo-hlr_10.42.42.2(pid=25200): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25200)]
15:53:02.076836 run   osmo-hlr_10.42.42.2(pid=25200): stdout: 
| (launched: 2022-12-12_15:52:58.492652) 
15:53:02.132020 run   osmo-hlr_10.42.42.2(pid=25200): stderr: 
| 20221212155258691 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155258691 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155258692 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155258692 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155258692 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155258692 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155258704 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155258714 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155258714 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155258714 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:53:02.187329 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25189): Terminating (SIGTERM)
15:53:02.232602 run iperf3-srv_10.42.42.10(pid=25190): Terminating (SIGTERM)
15:53:02.277680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25191): Terminating (SIGTERM)
15:53:02.320323 run iperf3-srv_10.42.42.10(pid=25192): Terminating (SIGTERM)
15:53:02.362942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25193): Terminating (SIGTERM)
15:53:02.405712 run iperf3-srv_10.42.42.10(pid=25194): Terminating (SIGTERM)
15:53:02.447861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25195): Terminating (SIGTERM)
15:53:02.490443 run iperf3-srv_10.42.42.10(pid=25196): Terminating (SIGTERM)
15:53:02.532927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25199): Terminating (SIGTERM)
15:53:02.575553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25202): Terminating (SIGTERM)
15:53:02.617958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25205): Terminating (SIGTERM)
15:53:02.660579 ---      ParallelTerminationStrategy: PID 25189 died...
15:53:02.680344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25189): Terminated: ok {rc=0}
15:53:02.727547 ---      ParallelTerminationStrategy: PID 25190 died...
15:53:02.747122 run iperf3-srv_10.42.42.10(pid=25190): Terminated {rc=256}
15:53:02.794323 ---      ParallelTerminationStrategy: PID 25191 died...
15:53:02.814170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25191): Terminated: ok {rc=0}
15:53:02.861228 ---      ParallelTerminationStrategy: PID 25192 died...
15:53:02.880860 run iperf3-srv_10.42.42.10(pid=25192): Terminated {rc=256}
15:53:02.927964 ---      ParallelTerminationStrategy: PID 25193 died...
15:53:02.947803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25193): Terminated: ok {rc=0}
15:53:02.994889 ---      ParallelTerminationStrategy: PID 25194 died...
15:53:03.014734 run iperf3-srv_10.42.42.10(pid=25194): Terminated {rc=256}
15:53:03.061708 ---      ParallelTerminationStrategy: PID 25195 died...
15:53:03.081507 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25195): Terminated: ok {rc=0}
15:53:03.128516 ---      ParallelTerminationStrategy: PID 25196 died...
15:53:03.148388 run iperf3-srv_10.42.42.10(pid=25196): Terminated {rc=256}
15:53:03.195227 ---      ParallelTerminationStrategy: PID 25199 died...
15:53:03.214746 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25199): Terminated: ok {rc=0}
15:53:03.261716 ---      ParallelTerminationStrategy: PID 25202 died...
15:53:03.281600 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25202): Terminated: ok {rc=0}
15:53:03.328465 ---      ParallelTerminationStrategy: PID 25205 died...
15:53:03.348596 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25205): Terminated: ok {rc=0}
15:53:03.438056 bus                          /gobi_4: Setting Powered False
15:53:04.538890 bus                          /gobi_4: Setting Powered False
15:53:05.656253 bus                          /gobi_1: Setting Powered False
15:53:06.755231 bus                          /gobi_1: Setting Powered False
15:53:07.873369 bus                          /gobi_0: Setting Powered False
15:53:08.971803 bus                          /gobi_0: Setting Powered False
15:53:10.090692 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200 ping.py
----------------------------------------------
15:53:11.191161 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.202483 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
15:53:11.251215 tst                          ping.py: using LAC 29925
15:53:11.372066 tst                          ping.py: using RAC 90
15:53:11.492662 tst                          ping.py: using CellId 29925
15:53:11.612670 tst                          ping.py: using BVCI 29926
15:53:11.722596 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.733267 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.743740 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.754256 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.764518 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.774949 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.785539 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:11.795928 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:53:11.910548 tst                       ping.py:19: start network...
15:53:12.114656 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:53:12.589516 run         create_hlr_db(pid=25207): Launched
15:53:12.714488 bus                          /gobi_6: Setting Powered False
15:53:13.775605 run         create_hlr_db(pid=25207): Terminated: ok {rc=0}
15:53:14.226081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25209): Launched
15:53:14.558614 run   osmo-hlr_10.42.42.2(pid=25210): Launched
15:53:14.683829 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:53:15.250975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25212): Launched
15:53:15.583127 run   osmo-stp_10.42.42.5(pid=25213): Launched
15:53:15.707692 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:53:16.319779 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25215): Launched
15:53:16.452107 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:53:16.720752 run              patchelf(pid=25216): Launched
15:53:16.941886 run   osmo-stp_10.42.42.5(pid=25213): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25213)]
15:53:17.083507 run   osmo-stp_10.42.42.5(pid=25213): stdout: 
| (launched: 2022-12-12_15:53:15.519713)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:17.227752 run   osmo-stp_10.42.42.5(pid=25213): stderr: 
| 20221212155315712 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155315712 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155315713 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155315713 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155315714 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155315714 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155315714 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:17.368728 run   osmo-stp_10.42.42.5(pid=25213): stdout: 
| (launched: 2022-12-12_15:53:15.519713)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:17.502704 run   osmo-stp_10.42.42.5(pid=25213): stderr: 
| 20221212155315712 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155315712 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155315713 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155315713 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155315714 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155315714 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155315714 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:17.661417 run              patchelf(pid=25216): Terminating (SIGINT)
15:53:17.844514 run              patchelf(pid=25216): Terminated: ok {rc=0}
15:53:17.976414 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25213): Process ended prematurely: osmo-stp_10.42.42.5(pid=25213) [trial-2378↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25213)]  [trial-2378↪gprs:trx-b200↪ping.py:22]
15:53:17.986475 tst                       ping.py:22: Test FAILED (6.8 sec)
15:53:18.016555 run   osmo-hlr_10.42.42.2(pid=25210): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25210)]
15:53:18.067848 run   osmo-hlr_10.42.42.2(pid=25210): stdout: 
| (launched: 2022-12-12_15:53:14.495232) 
15:53:18.121100 run   osmo-hlr_10.42.42.2(pid=25210): stderr: 
| 20221212155314693 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155314693 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155314693 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155314693 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155314693 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155314693 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155314709 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155314719 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155314719 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155314719 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:53:18.174667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25209): Terminating (SIGTERM)
15:53:18.217528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25212): Terminating (SIGTERM)
15:53:18.260700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25215): Terminating (SIGTERM)
15:53:18.304660 ---      ParallelTerminationStrategy: PID 25209 died...
15:53:18.325201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25209): Terminated: ok {rc=0}
15:53:18.373250 ---      ParallelTerminationStrategy: PID 25212 died...
15:53:18.393302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25212): Terminated: ok {rc=0}
15:53:18.440704 ---      ParallelTerminationStrategy: PID 25215 died...
15:53:18.460663 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25215): Terminated: ok {rc=0}
15:53:18.549651 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
15:53:19.637844 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:19.650045 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
15:53:19.702111 tst                ping_idle_ping.py: using LAC 29926
15:53:19.831003 tst                ping_idle_ping.py: using RAC 91
15:53:19.960191 tst                ping_idle_ping.py: using CellId 29926
15:53:20.087476 tst                ping_idle_ping.py: using BVCI 29927
15:53:20.207975 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.219176 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.230249 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.241794 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.252925 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.264242 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.275640 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
15:53:20.286957 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
15:53:20.407251 tst             ping_idle_ping.py:24: start network...
15:53:20.628578 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:53:21.140572 run         create_hlr_db(pid=25217): Launched
15:53:21.267102 bus                          /gobi_6: Setting Powered False
15:53:22.331638 run         create_hlr_db(pid=25217): Terminated: ok {rc=0}
15:53:22.772663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25219): Launched
15:53:23.083228 run   osmo-hlr_10.42.42.2(pid=25220): Launched
15:53:23.199279 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:53:23.741861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25222): Launched
15:53:24.049395 run   osmo-stp_10.42.42.5(pid=25223): Launched
15:53:24.174083 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:53:24.742648 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25225): Launched
15:53:24.869859 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:53:25.149788 run              patchelf(pid=25226): Launched
15:53:25.331442 run   osmo-stp_10.42.42.5(pid=25223): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25223)]
15:53:25.470554 run   osmo-stp_10.42.42.5(pid=25223): stdout: 
| (launched: 2022-12-12_15:53:23.989483)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:25.610542 run   osmo-stp_10.42.42.5(pid=25223): stderr: 
| 20221212155324169 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155324169 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155324169 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155324169 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155324170 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155324170 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155324170 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:25.750474 run   osmo-stp_10.42.42.5(pid=25223): stdout: 
| (launched: 2022-12-12_15:53:23.989483)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:25.883843 run   osmo-stp_10.42.42.5(pid=25223): stderr: 
| 20221212155324169 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155324169 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155324169 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155324169 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155324170 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155324170 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155324170 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:26.042305 run              patchelf(pid=25226): Terminating (SIGINT)
15:53:26.224522 run              patchelf(pid=25226): Terminated: ok {rc=0}
15:53:26.356883 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=25223): Process ended prematurely: osmo-stp_10.42.42.5(pid=25223) [trial-2378↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25223)]  [trial-2378↪gprs:trx-b200↪ping_idle_ping.py:27]
15:53:26.366800 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
15:53:26.395668 run   osmo-hlr_10.42.42.2(pid=25220): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25220)]
15:53:26.446486 run   osmo-hlr_10.42.42.2(pid=25220): stdout: 
| (launched: 2022-12-12_15:53:23.023517) 
15:53:26.499129 run   osmo-hlr_10.42.42.2(pid=25220): stderr: 
| 20221212155323202 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155323202 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155323202 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155323202 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155323202 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155323202 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155323215 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155323225 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155323226 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155323226 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:53:26.552270 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25219): Terminating (SIGTERM)
15:53:26.595050 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25222): Terminating (SIGTERM)
15:53:26.637786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25225): Terminating (SIGTERM)
15:53:26.680556 ---      ParallelTerminationStrategy: PID 25219 died...
15:53:26.701012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25219): Terminated: ok {rc=0}
15:53:26.748392 ---      ParallelTerminationStrategy: PID 25222 died...
15:53:26.768357 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25222): Terminated: ok {rc=0}
15:53:26.815179 ---      ParallelTerminationStrategy: PID 25225 died...
15:53:26.835024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25225): Terminated: ok {rc=0}
15:53:26.924388 bus                          /gobi_6: Setting Powered False
---------------------------------------------------------------------
trial-2378 gprs:trx-b200 FAIL
---------------------------------------------------------------------

---------------------------------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs
---------------------------------------------------------------------
15:53:28.232309 tst     gprs:trx-b200+mod-bts0-egprs: reserving resources in /var/tmp/osmo-gsm-tester/state ...
15:53:28.238046 tst     gprs:trx-b200+mod-bts0-egprs: Verifying 1 x bts (candidates: 11)
15:53:28.271171 tst     gprs:trx-b200+mod-bts0-egprs: Verifying 9 x ip_address (candidates: 9)
15:53:28.309230 tst     gprs:trx-b200+mod-bts0-egprs: Verifying 4 x modem (candidates: 12)
15:53:28.395571 tst     gprs:trx-b200+mod-bts0-egprs: Reserving 1 x bts (candidates: 11)
15:53:28.428101 tst     gprs:trx-b200+mod-bts0-egprs: Reserving 9 x ip_address (candidates: 9)
15:53:28.465914 tst     gprs:trx-b200+mod-bts0-egprs: Reserving 4 x modem (candidates: 12)
15:53:29.063107 tst     gprs:trx-b200+mod-bts0-egprs: RESERVED RESOURCES for gprs:
bts
  Ettus B200
ip_address
  10.42.42.2
  10.42.42.3
  10.42.42.4
  10.42.42.5
  10.42.42.6
  10.42.42.7
  10.42.42.8
  10.42.42.9
  10.42.42.10
modem
  ec20_1
  ec20_2
  ec20_3
  ec20_4

----------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py
----------------------------------------------
15:53:29.112448 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.123320 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
15:53:29.171685 tst         cs_paging_gprs_active.py: using LAC 29927
15:53:29.290284 tst         cs_paging_gprs_active.py: using RAC 92
15:53:29.411433 tst         cs_paging_gprs_active.py: using CellId 29927
15:53:29.537295 tst         cs_paging_gprs_active.py: using BVCI 29928
15:53:29.650289 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.661226 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.671756 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.682428 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.692942 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.703492 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.714291 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.724834 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:29.735538 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:29.855471 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:29.975482 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
15:53:30.184011 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:30.499230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25230): Launched
15:53:30.772862 run iperf3-srv_10.42.42.10(pid=25231): Launched
15:53:30.922779 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
15:53:31.159711 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:31.523875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25232): Launched
15:53:31.834669 run iperf3-srv_10.42.42.10(pid=25233): Launched
15:53:32.015851 tst      cs_paging_gprs_active.py:38: start network...
15:53:32.278992 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:53:32.764475 run         create_hlr_db(pid=25234): Launched
15:53:32.893455 bus                          /gobi_6: Setting Powered False
15:53:33.954564 run         create_hlr_db(pid=25234): Terminated: ok {rc=0}
15:53:34.411090 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25236): Launched
15:53:34.747423 run   osmo-hlr_10.42.42.2(pid=25237): Launched
15:53:34.874379 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:53:35.446942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25239): Launched
15:53:35.783653 run   osmo-stp_10.42.42.5(pid=25240): Launched
15:53:35.910298 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:53:36.486199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25242): Launched
15:53:36.614674 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:53:36.898524 run              patchelf(pid=25243): Launched
15:53:37.084217 run   osmo-stp_10.42.42.5(pid=25240): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25240)]
15:53:37.224867 run   osmo-stp_10.42.42.5(pid=25240): stdout: 
| (launched: 2022-12-12_15:53:35.719185)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:37.367615 run   osmo-stp_10.42.42.5(pid=25240): stderr: 
| 20221212155335911 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155335912 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155335912 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155335912 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155335913 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155335913 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155335913 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:37.509719 run   osmo-stp_10.42.42.5(pid=25240): stdout: 
| (launched: 2022-12-12_15:53:35.719185)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:37.645413 run   osmo-stp_10.42.42.5(pid=25240): stderr: 
| 20221212155335911 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155335912 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155335912 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155335912 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155335913 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155335913 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155335913 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:37.806497 run              patchelf(pid=25243): Terminating (SIGINT)
15:53:37.992503 run              patchelf(pid=25243): Terminated: ok {rc=0}
15:53:38.127062 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25240): Process ended prematurely: osmo-stp_10.42.42.5(pid=25240) [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25240)]  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38]
15:53:38.137403 tst      cs_paging_gprs_active.py:38: Test FAILED (9.1 sec)
15:53:38.166059 run   osmo-hlr_10.42.42.2(pid=25237): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25237)]
15:53:38.216445 run   osmo-hlr_10.42.42.2(pid=25237): stdout: 
| (launched: 2022-12-12_15:53:34.683570) 
15:53:38.268404 run   osmo-hlr_10.42.42.2(pid=25237): stderr: 
| 20221212155334881 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155334881 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155334881 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155334881 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155334881 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155334881 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155334894 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155334903 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155334903 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155334903 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:53:38.321011 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25230): Terminating (SIGTERM)
15:53:38.363579 run iperf3-srv_10.42.42.10(pid=25231): Terminating (SIGTERM)
15:53:38.405610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25232): Terminating (SIGTERM)
15:53:38.447592 run iperf3-srv_10.42.42.10(pid=25233): Terminating (SIGTERM)
15:53:38.489619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25236): Terminating (SIGTERM)
15:53:38.531521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25239): Terminating (SIGTERM)
15:53:38.573499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25242): Terminating (SIGTERM)
15:53:38.615492 ---      ParallelTerminationStrategy: PID 25230 died...
15:53:38.635497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25230): Terminated: ok {rc=0}
15:53:38.682003 ---      ParallelTerminationStrategy: PID 25231 died...
15:53:38.701355 run iperf3-srv_10.42.42.10(pid=25231): Terminated {rc=256}
15:53:38.747563 ---      ParallelTerminationStrategy: PID 25232 died...
15:53:38.767005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25232): Terminated: ok {rc=0}
15:53:38.813504 ---      ParallelTerminationStrategy: PID 25233 died...
15:53:38.832852 run iperf3-srv_10.42.42.10(pid=25233): Terminated {rc=256}
15:53:38.879138 ---      ParallelTerminationStrategy: PID 25236 died...
15:53:38.898525 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25236): Terminated: ok {rc=0}
15:53:38.944874 ---      ParallelTerminationStrategy: PID 25239 died...
15:53:38.964821 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25239): Terminated: ok {rc=0}
15:53:39.011112 ---      ParallelTerminationStrategy: PID 25242 died...
15:53:39.030495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25242): Terminated: ok {rc=0}
15:53:39.118979 bus                          /gobi_0: Setting Powered False
15:53:40.217722 bus                          /gobi_0: Setting Powered False
15:53:41.332693 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs iperf3.py
----------------------------------------------
15:53:42.483230 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:42.495274 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
15:53:42.549784 tst                        iperf3.py: using LAC 29928
15:53:42.679210 tst                        iperf3.py: using RAC 93
15:53:42.809887 tst                        iperf3.py: using CellId 29928
15:53:42.939527 tst                        iperf3.py: using BVCI 29929
15:53:43.062023 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.073588 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.084628 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.096141 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.107495 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.118927 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.130803 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.142180 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:43.153775 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:43.274744 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
15:53:43.500119 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:43.837732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25244): Launched
15:53:44.131893 run iperf3-srv_10.42.42.10(pid=25245): Launched
15:53:44.258179 tst                      iperf3.py:8: start network...
15:53:44.483212 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:53:44.999923 run         create_hlr_db(pid=25246): Launched
15:53:45.126224 bus                          /gobi_6: Setting Powered False
15:53:46.229842 run         create_hlr_db(pid=25246): Terminated: ok {rc=0}
15:53:46.834201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25296): Launched
15:53:47.208177 run   osmo-hlr_10.42.42.2(pid=25301): Launched
15:53:47.481854 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:53:48.275804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25357): Launched
15:53:48.673814 run   osmo-stp_10.42.42.5(pid=25386): Launched
15:53:48.945281 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:53:49.764075 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25524): Launched
15:53:49.964802 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:53:50.257804 run              patchelf(pid=25527): Launched
15:53:50.461298 run   osmo-stp_10.42.42.5(pid=25386): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25386)]
15:53:50.606576 run   osmo-stp_10.42.42.5(pid=25386): stdout: 
| (launched: 2022-12-12_15:53:48.605831)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:50.753550 run   osmo-stp_10.42.42.5(pid=25386): stderr: 
| 20221212155348966 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155348966 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155348966 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155348967 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155348967 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155348967 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155348967 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:50.899657 run   osmo-stp_10.42.42.5(pid=25386): stdout: 
| (launched: 2022-12-12_15:53:48.605831)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:53:51.039775 run   osmo-stp_10.42.42.5(pid=25386): stderr: 
| 20221212155348966 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155348966 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155348966 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155348967 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155348967 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155348967 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155348967 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:53:51.205029 run              patchelf(pid=25527): Terminating (SIGINT)
15:53:51.396765 run              patchelf(pid=25527): Terminated: ok {rc=0}
15:53:51.535604 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25386): Process ended prematurely: osmo-stp_10.42.42.5(pid=25386) [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25386)]  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8]
15:53:51.547088 tst                      iperf3.py:8: Test FAILED (9.1 sec)
15:53:51.579665 run   osmo-hlr_10.42.42.2(pid=25301): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25301)]
15:53:51.632900 run   osmo-hlr_10.42.42.2(pid=25301): stdout: 
| (launched: 2022-12-12_15:53:47.142917) 
15:53:51.687557 run   osmo-hlr_10.42.42.2(pid=25301): stderr: 
| 20221212155347506 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155347506 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155347506 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155347506 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155347506 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155347506 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155347524 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155347532 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155347533 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155347533 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:53:51.743101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25244): Terminating (SIGTERM)
15:53:51.787850 run iperf3-srv_10.42.42.10(pid=25245): Terminating (SIGTERM)
15:53:51.834983 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25296): Terminating (SIGTERM)
15:53:51.880055 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25357): Terminating (SIGTERM)
15:53:51.925410 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25524): Terminating (SIGTERM)
15:53:51.967659 ---      ParallelTerminationStrategy: PID 25244 died...
15:53:51.987066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25244): Terminated: ok {rc=0}
15:53:52.033697 ---      ParallelTerminationStrategy: PID 25245 died...
15:53:52.052505 run iperf3-srv_10.42.42.10(pid=25245): Terminated {rc=256}
15:53:52.096438 ---      ParallelTerminationStrategy: PID 25296 died...
15:53:52.115659 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25296): Terminated: ok {rc=0}
15:53:52.161102 ---      ParallelTerminationStrategy: PID 25357 died...
15:53:52.180114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25357): Terminated: ok {rc=0}
15:53:52.225665 ---      ParallelTerminationStrategy: PID 25524 died...
15:53:52.244882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25524): Terminated: ok {rc=0}
15:53:52.330641 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs iperf3m4.py
----------------------------------------------
15:53:53.479598 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:53.492244 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
15:53:53.543977 tst                      iperf3m4.py: using LAC 29929
15:53:53.668339 tst                      iperf3m4.py: using RAC 94
15:53:53.791644 tst                      iperf3m4.py: using CellId 29929
15:53:53.916399 tst                      iperf3m4.py: using BVCI 29930
15:53:54.033551 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.045517 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.057284 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.069251 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.081488 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.093990 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.105957 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.118303 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:53:54.131595 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:54.254135 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:54.376242 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:54.499570 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:53:54.623013 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
15:53:54.837071 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:55.159375 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25530): Launched
15:53:55.452551 run iperf3-srv_10.42.42.10(pid=25531): Launched
15:53:55.586247 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
15:53:55.801911 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:56.122504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25532): Launched
15:53:56.416628 run iperf3-srv_10.42.42.10(pid=25533): Launched
15:53:56.550883 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
15:53:56.764175 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:57.088063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25534): Launched
15:53:57.382437 run iperf3-srv_10.42.42.10(pid=25535): Launched
15:53:57.522666 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
15:53:57.751516 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
15:53:58.094481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25536): Launched
15:53:58.402409 run iperf3-srv_10.42.42.10(pid=25537): Launched
15:53:58.543481 tst                    iperf3m4.py:8: start network...
15:53:58.772724 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:53:59.300174 run         create_hlr_db(pid=25538): Launched
15:53:59.462692 bus                          /gobi_6: Setting Powered False
15:54:00.529648 run         create_hlr_db(pid=25538): Terminated: ok {rc=0}
15:54:01.073698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25540): Launched
15:54:01.431933 run   osmo-hlr_10.42.42.2(pid=25541): Launched
15:54:01.690944 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:54:02.499093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25543): Launched
15:54:02.923512 run   osmo-stp_10.42.42.5(pid=25544): Launched
15:54:03.244388 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:54:03.893874 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25546): Launched
15:54:04.036893 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:54:04.330947 run              patchelf(pid=25547): Launched
15:54:04.536089 run   osmo-stp_10.42.42.5(pid=25544): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25544)]
15:54:04.683690 run   osmo-stp_10.42.42.5(pid=25544): stdout: 
| (launched: 2022-12-12_15:54:02.848209)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:04.831933 run   osmo-stp_10.42.42.5(pid=25544): stderr: 
| 20221212155403111 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155403111 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155403111 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155403112 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155403112 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155403112 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155403112 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:04.980100 run   osmo-stp_10.42.42.5(pid=25544): stdout: 
| (launched: 2022-12-12_15:54:02.848209)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:05.121602 run   osmo-stp_10.42.42.5(pid=25544): stderr: 
| 20221212155403111 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155403111 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155403111 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155403112 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155403112 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155403112 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155403112 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:05.291285 run              patchelf(pid=25547): Terminating (SIGINT)
15:54:05.486272 run              patchelf(pid=25547): Terminated: ok {rc=0}
15:54:05.626720 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25544): Process ended prematurely: osmo-stp_10.42.42.5(pid=25544) [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25544)]  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8]
15:54:05.638248 tst                    iperf3m4.py:8: Test FAILED (12.2 sec)
15:54:05.672293 run   osmo-hlr_10.42.42.2(pid=25541): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25541)]
15:54:05.726006 run   osmo-hlr_10.42.42.2(pid=25541): stdout: 
| (launched: 2022-12-12_15:54:01.369984) 
15:54:05.782194 run   osmo-hlr_10.42.42.2(pid=25541): stderr: 
| 20221212155401668 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155401668 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155401668 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155401668 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155401668 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155401668 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155401681 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200+mod-bts0-egprs/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155401699 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155401699 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155401699 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:54:05.839386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25530): Terminating (SIGTERM)
15:54:05.885530 run iperf3-srv_10.42.42.10(pid=25531): Terminating (SIGTERM)
15:54:05.934585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25532): Terminating (SIGTERM)
15:54:05.981157 run iperf3-srv_10.42.42.10(pid=25533): Terminating (SIGTERM)
15:54:06.030430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25534): Terminating (SIGTERM)
15:54:06.076454 run iperf3-srv_10.42.42.10(pid=25535): Terminating (SIGTERM)
15:54:06.124566 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25536): Terminating (SIGTERM)
15:54:06.171180 run iperf3-srv_10.42.42.10(pid=25537): Terminating (SIGTERM)
15:54:06.220802 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25540): Terminating (SIGTERM)
15:54:06.266373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25543): Terminating (SIGTERM)
15:54:06.312006 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25546): Terminating (SIGTERM)
15:54:06.359481 ---      ParallelTerminationStrategy: PID 25530 died...
15:54:06.381242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25530): Terminated: ok {rc=0}
15:54:06.434487 ---      ParallelTerminationStrategy: PID 25531 died...
15:54:06.455878 run iperf3-srv_10.42.42.10(pid=25531): Terminated {rc=256}
15:54:06.506421 ---      ParallelTerminationStrategy: PID 25532 died...
15:54:06.527833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25532): Terminated: ok {rc=0}
15:54:06.578710 ---      ParallelTerminationStrategy: PID 25533 died...
15:54:06.599809 run iperf3-srv_10.42.42.10(pid=25533): Terminated {rc=256}
15:54:06.651368 ---      ParallelTerminationStrategy: PID 25534 died...
15:54:06.672806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25534): Terminated: ok {rc=0}
15:54:06.723734 ---      ParallelTerminationStrategy: PID 25535 died...
15:54:06.744527 run iperf3-srv_10.42.42.10(pid=25535): Terminated {rc=256}
15:54:06.795904 ---      ParallelTerminationStrategy: PID 25536 died...
15:54:06.817846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25536): Terminated: ok {rc=0}
15:54:06.868312 ---      ParallelTerminationStrategy: PID 25537 died...
15:54:06.889672 run iperf3-srv_10.42.42.10(pid=25537): Terminated {rc=256}
15:54:06.940589 ---      ParallelTerminationStrategy: PID 25540 died...
15:54:06.962400 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25540): Terminated: ok {rc=0}
15:54:07.014160 ---      ParallelTerminationStrategy: PID 25543 died...
15:54:07.035511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25543): Terminated: ok {rc=0}
15:54:07.086062 ---      ParallelTerminationStrategy: PID 25546 died...
15:54:07.107363 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25546): Terminated: ok {rc=0}
15:54:07.202896 bus                          /gobi_4: Setting Powered False
15:54:08.308633 bus                          /gobi_4: Setting Powered False
15:54:09.431441 bus                          /gobi_1: Setting Powered False
15:54:10.531911 bus                          /gobi_1: Setting Powered False
15:54:11.652033 bus                          /gobi_0: Setting Powered False
15:54:12.753769 bus                          /gobi_0: Setting Powered False
15:54:13.870393 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs ping.py
----------------------------------------------
15:54:14.973203 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:14.985396 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
15:54:15.039324 tst                          ping.py: using LAC 29930
15:54:15.166739 tst                          ping.py: using RAC 95
15:54:15.294900 tst                          ping.py: using CellId 29930
15:54:15.423888 tst                          ping.py: using BVCI 29931
15:54:15.542165 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.553678 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.564879 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.576510 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.587909 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.599275 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.610902 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:15.622366 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:54:15.740366 tst                       ping.py:19: start network...
15:54:15.962922 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:54:16.547859 run         create_hlr_db(pid=25549): Launched
15:54:16.751736 bus                          /gobi_6: Setting Powered False
15:54:17.816439 run         create_hlr_db(pid=25549): Terminated: ok {rc=0}
15:54:18.283348 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25551): Launched
15:54:18.614814 run   osmo-hlr_10.42.42.2(pid=25552): Launched
15:54:18.740297 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:54:19.307758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25554): Launched
15:54:19.638253 run   osmo-stp_10.42.42.5(pid=25555): Launched
15:54:19.763226 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:54:20.328620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25557): Launched
15:54:20.454484 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:54:20.731488 run              patchelf(pid=25558): Launched
15:54:20.913191 run   osmo-stp_10.42.42.5(pid=25555): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25555)]
15:54:21.050548 run   osmo-stp_10.42.42.5(pid=25555): stdout: 
| (launched: 2022-12-12_15:54:19.575315)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:21.190036 run   osmo-stp_10.42.42.5(pid=25555): stderr: 
| 20221212155419766 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155419767 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155419767 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155419767 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155419768 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155419768 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155419768 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:21.329665 run   osmo-stp_10.42.42.5(pid=25555): stdout: 
| (launched: 2022-12-12_15:54:19.575315)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:21.463239 run   osmo-stp_10.42.42.5(pid=25555): stderr: 
| 20221212155419766 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155419767 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155419767 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155419767 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155419768 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155419768 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155419768 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:21.621181 run              patchelf(pid=25558): Terminating (SIGINT)
15:54:21.802692 run              patchelf(pid=25558): Terminated: ok {rc=0}
15:54:21.934008 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25555): Process ended prematurely: osmo-stp_10.42.42.5(pid=25555) [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25555)]  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22]
15:54:21.943811 tst                       ping.py:22: Test FAILED (7.0 sec)
15:54:21.972309 run   osmo-hlr_10.42.42.2(pid=25552): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25552)]
15:54:22.022022 run   osmo-hlr_10.42.42.2(pid=25552): stdout: 
| (launched: 2022-12-12_15:54:18.551221) 
15:54:22.073862 run   osmo-hlr_10.42.42.2(pid=25552): stderr: 
| 20221212155418749 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155418749 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155418749 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155418749 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155418749 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155418749 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155418761 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155418770 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155418770 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155418770 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:54:22.126289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25551): Terminating (SIGTERM)
15:54:22.167952 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25554): Terminating (SIGTERM)
15:54:22.209662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25557): Terminating (SIGTERM)
15:54:22.251760 ---      ParallelTerminationStrategy: PID 25551 died...
15:54:22.271682 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25551): Terminated: ok {rc=0}
15:54:22.318472 ---      ParallelTerminationStrategy: PID 25554 died...
15:54:22.337980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25554): Terminated: ok {rc=0}
15:54:22.385528 ---      ParallelTerminationStrategy: PID 25557 died...
15:54:22.405034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25557): Terminated: ok {rc=0}
15:54:22.492556 bus                          /gobi_6: Setting Powered False

----------------------------------------------
trial-2378 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
15:54:23.580062 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:23.592179 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
15:54:23.644526 tst                ping_idle_ping.py: using LAC 29931
15:54:23.772463 tst                ping_idle_ping.py: using RAC 96
15:54:23.898540 tst                ping_idle_ping.py: using CellId 29931
15:54:24.026385 tst                ping_idle_ping.py: using BVCI 29932
15:54:24.146100 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.157633 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.168699 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.180319 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.191883 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.203239 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.214868 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
15:54:24.226368 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
15:54:24.342862 tst             ping_idle_ping.py:24: start network...
15:54:24.548256 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
15:54:25.025182 run         create_hlr_db(pid=25559): Launched
15:54:25.151085 bus                          /gobi_6: Setting Powered False
15:54:26.211889 run         create_hlr_db(pid=25559): Terminated: ok {rc=0}
15:54:26.641506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25561): Launched
15:54:26.952471 run   osmo-hlr_10.42.42.2(pid=25562): Launched
15:54:27.069499 run              osmo-stp_10.42.42.5: Starting osmo-stp
15:54:27.599936 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25564): Launched
15:54:27.910356 run   osmo-stp_10.42.42.5(pid=25565): Launched
15:54:28.027444 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
15:54:28.557420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25567): Launched
15:54:28.675230 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
15:54:28.937281 run              patchelf(pid=25568): Launched
15:54:29.107861 run   osmo-stp_10.42.42.5(pid=25565): ERR: Terminated: ERROR {rc=1}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25565)]
15:54:29.236561 run   osmo-stp_10.42.42.5(pid=25565): stdout: 
| (launched: 2022-12-12_15:54:27.850399)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:29.366865 run   osmo-stp_10.42.42.5(pid=25565): stderr: 
| 20221212155428024 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155428025 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155428025 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155428025 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155428026 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155428026 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155428026 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:29.496845 run   osmo-stp_10.42.42.5(pid=25565): stdout: 
| (launched: 2022-12-12_15:54:27.850399)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
15:54:29.621225 run   osmo-stp_10.42.42.5(pid=25565): stderr: 
| 20221212155428024 DLSS7 INFO Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| 20221212155428025 DLSS7 INFO Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| 20221212155428025 DLSS7 INFO (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| 20221212155428025 DLGLOBAL NOTICE unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212155428026 DLGLOBAL ERROR unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212155428026 DLGLOBAL ERROR no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212155428026 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
15:54:29.768398 run              patchelf(pid=25568): Terminating (SIGINT)
15:54:29.939340 run              patchelf(pid=25568): Terminated: ok {rc=0}
15:54:30.062465 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=25565): Process ended prematurely: osmo-stp_10.42.42.5(pid=25565) [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25565)]  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27]
15:54:30.071371 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
15:54:30.098248 run   osmo-hlr_10.42.42.2(pid=25562): ERR: Terminated: ERROR {rc=237}  [trial-2378↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25562)]
15:54:30.145291 run   osmo-hlr_10.42.42.2(pid=25562): stdout: 
| (launched: 2022-12-12_15:54:26.892783) 
15:54:30.194486 run   osmo-hlr_10.42.42.2(pid=25562): stderr: 
| 20221212155427071 DDB DEBUG SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| 20221212155427071 DDB DEBUG SQLite3 compiled with 'SOUNDEX' (db.c:579)
| 20221212155427071 DDB DEBUG SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| 20221212155427071 DDB DEBUG SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| 20221212155427071 DDB DEBUG SQLite3 compiled with 'USE_URI' (db.c:579)
| 20221212155427071 DDB DEBUG Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| 20221212155427084 DDB NOTICE Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2378/run.2022-12-12_15-30-01/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| 20221212155427094 DLGLOBAL ERROR unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212155427094 DLGLOBAL ERROR no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212155427095 DLGLOBAL ERROR Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
15:54:30.243900 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25561): Terminating (SIGTERM)
15:54:30.283348 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25564): Terminating (SIGTERM)
15:54:30.322917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25567): Terminating (SIGTERM)
15:54:30.362983 ---      ParallelTerminationStrategy: PID 25561 died...
15:54:30.381878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25561): Terminated: ok {rc=0}
15:54:30.426097 ---      ParallelTerminationStrategy: PID 25564 died...
15:54:30.444892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25564): Terminated: ok {rc=0}
15:54:30.489011 ---      ParallelTerminationStrategy: PID 25567 died...
15:54:30.507898 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25567): Terminated: ok {rc=0}
15:54:30.592012 bus                          /gobi_6: Setting Powered False
FATAL: command execution failed
java.io.EOFException
	at java.base/java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2905)
	at java.base/java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3400)
	at java.base/java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:936)
	at java.base/java.io.ObjectInputStream.<init>(ObjectInputStream.java:379)
	at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
	at hudson.remoting.Command.readFrom(Command.java:142)
	at hudson.remoting.Command.readFrom(Command.java:128)
	at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
	at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
	at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Caused: java.io.IOException: Backing channel 'osmo-gsm-tester-prod' is disconnected.
	at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:215)
	at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:285)
	at com.sun.proxy.$Proxy77.isAlive(Unknown Source)
	at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1215)
	at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1207)
	at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:195)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:145)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:814)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:522)
	at hudson.model.Run.execute(Run.java:1896)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:101)
	at hudson.model.Executor.run(Executor.java:442)
FATAL: Unable to delete script file /tmp/jenkins12576255231115906942.sh
java.io.EOFException
	at java.base/java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2905)
	at java.base/java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3400)
	at java.base/java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:936)
	at java.base/java.io.ObjectInputStream.<init>(ObjectInputStream.java:379)
	at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
	at hudson.remoting.Command.readFrom(Command.java:142)
	at hudson.remoting.Command.readFrom(Command.java:128)
	at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
	at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
	at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@10128372:osmo-gsm-tester-prod": Remote call on osmo-gsm-tester-prod failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:993)
	at hudson.FilePath.act(FilePath.java:1194)
	at hudson.FilePath.act(FilePath.java:1183)
	at hudson.FilePath.delete(FilePath.java:1730)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:163)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:814)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:522)
	at hudson.model.Run.execute(Run.java:1896)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:101)
	at hudson.model.Executor.run(Executor.java:442)
Build step 'Execute shell' marked build as failure
ERROR: Step ‘Archive the artifacts’ failed: no workspace for osmo-gsm-tester_run-prod #2378
ERROR: Step ‘Publish JUnit test result report’ failed: no workspace for osmo-gsm-tester_run-prod #2378
Sending e-mails to: pespin@sysmocom.de
Finished: FAILURE