Skipping 115 KB..
Full Log#8 67.17 Setting up pinentry-curses (1.1.0-2) ...
#8 67.23 Setting up libdbi-dev (0.9.0-5) ...
#8 67.29 Setting up libpython3.7-stdlib:amd64 (3.7.3-2+deb10u7) ...
#8 67.34 Setting up flex (2.6.4-6.2) ...
#8 67.39 Setting up libfftw3-single3:amd64 (3.3.8-2) ...
#8 67.44 Setting up libgmp-dev:amd64 (2:6.1.2+dfsg-4+deb10u1) ...
#8 67.49 Setting up gpg-agent (2.2.12-1+deb10u2) ...
#8 67.57 Setting up telnet (0.17-41.2) ...
#8 67.61 update-alternatives: using /usr/bin/telnet.netkit to provide /usr/bin/telnet (telnet) in auto mode
#8 67.64 Setting up wget (1.20.1-1.1) ...
#8 67.71 Setting up nettle-dev:amd64 (3.4.1-1+deb10u1) ...
#8 67.76 Setting up libopts25-dev:amd64 (1:5.18.12-4) ...
#8 67.81 Setting up libmbedx509-0:amd64 (2.16.9-0~deb10u1) ...
#8 67.86 Setting up guile-2.0-libs:amd64 (2.0.13+1-5.1) ...
#8 67.92 Setting up libdbd-sqlite3:amd64 (0.9.0-6+b1) ...
#8 67.97 Setting up gcc-arm-none-eabi (15:7-2018-q2-6) ...
#8 68.03 Setting up libedit2:amd64 (3.1-20181209-1) ...
#8 68.08 Setting up gpgsm (2.2.12-1+deb10u2) ...
#8 68.14 Setting up libmbedtls12:amd64 (2.16.9-0~deb10u1) ...
#8 68.19 Setting up libglib2.0-bin (2.58.3-2+deb10u5) ...
#8 68.24 Setting up libldap-2.4-2:amd64 (2.4.47+dfsg-3+deb10u7) ...
#8 68.30 Setting up libfftw3-long3:amd64 (3.3.8-2) ...
#8 68.35 Setting up libusb-1.0-0-dev:amd64 (2:1.0.22-2) ...
#8 68.40 Setting up binutils (2.31.1-16) ...
#8 68.46 Setting up libgps23:amd64 (3.17-7) ...
#8 68.51 Setting up libllvm6.0:amd64 (1:6.0.1-10) ...
#8 68.56 Setting up libclang1-6.0:amd64 (1:6.0.1-10) ...
#8 68.62 Setting up dirmngr (2.2.12-1+deb10u2) ...
#8 68.70 Setting up ca-certificates (20200601~deb10u2) ...
#8 68.79 debconf: unable to initialize frontend: Dialog
#8 68.79 debconf: (TERM is not set, so the dialog frontend is not usable.)
#8 68.79 debconf: falling back to frontend: Readline
#8 69.69 Updating certificates in /etc/ssl/certs...
#8 71.25 137 added, 0 removed; done.
#8 71.37 Setting up doxygen (1.8.13-10) ...
#8 71.42 Setting up libunbound8:amd64 (1.9.0-2+deb10u4) ...
#8 71.47 Setting up libfftw3-quad3:amd64 (3.3.8-2) ...
#8 71.52 Setting up bsdmainutils (11.1.2+b1) ...
#8 71.61 update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
#8 71.63 update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
#8 71.65 Setting up libgssapi-krb5-2:amd64 (1.17-3+deb10u6) ...
#8 71.71 Setting up libcroco3:amd64 (0.6.12-3) ...
#8 71.76 Setting up libgdbm-compat4:amd64 (1.18.1-4) ...
#8 71.81 Setting up libgcc-8-dev:amd64 (8.3.0-6) ...
#8 71.86 Setting up libperl5.28:amd64 (5.28.1-6+deb10u1) ...
#8 71.91 Setting up libsofia-sip-ua-dev (1.12.11+20110422.1-2.1+deb10u4) ...
#8 71.96 Setting up gpg-wks-server (2.2.12-1+deb10u2) ...
#8 72.02 Setting up groff-base (1.22.4-3+deb10u1) ...
#8 72.10 Setting up cpp (4:8.3.0-1) ...
#8 72.17 Setting up libc6-dev:amd64 (2.28-10+deb10u2) ...
#8 72.22 Setting up libpython3-stdlib:amd64 (3.7.3-1) ...
#8 72.27 Setting up libstdc++-8-dev:amd64 (8.3.0-6) ...
#8 72.37 Setting up python3.7 (3.7.3-2+deb10u7) ...
#8 72.73 Setting up libgnutls-dane0:amd64 (3.6.7-4+deb10u12) ...
#8 72.79 Setting up libncurses-dev:amd64 (6.1+20181013-2+deb10u5) ...
#8 72.84 Setting up gettext (0.19.8.1-9) ...
#8 72.89 Setting up gcc-8 (8.3.0-6) ...
#8 72.95 Setting up gpg-wks-client (2.2.12-1+deb10u2) ...
#8 73.00 Setting up libtool (2.4.6-9) ...
#8 73.06 Setting up libfftw3-bin (3.3.8-2) ...
#8 73.11 Setting up libpcre3-dev:amd64 (2:8.39-12) ...
#8 73.16 Setting up libbctoolbox1:amd64 (0.6.0-2+b2) ...
#8 73.22 Setting up libpcap0.8-dev:amd64 (1.8.1-6+deb10u1) ...
#8 73.27 Setting up libcurl3-gnutls:amd64 (7.64.0-4+deb10u9) ...
#8 73.32 Setting up python3 (3.7.3-1) ...
#8 73.37 running python rtupdate hooks for python3.7...
#8 73.46 running python post-rtupdate hooks for python3.7...
#8 73.53 Setting up libusb-dev (2:0.1.12-32) ...
#8 73.59 Setting up libreadline-dev:amd64 (7.0-5) ...
#8 73.64 Setting up man-db (2.8.5-2+deb10u1) ...
#8 73.79 debconf: unable to initialize frontend: Dialog
#8 73.79 debconf: (TERM is not set, so the dialog frontend is not usable.)
#8 73.79 debconf: falling back to frontend: Readline
#8 73.80 Building database of manual pages ...
#8 91.53 Setting up gcc (4:8.3.0-1) ...
#8 91.62 Setting up python3-six (1.12.0-1) ...
#8 91.74 Setting up perl (5.28.1-6+deb10u1) ...
#8 91.83 Setting up python3-pygments (2.3.1+dfsg-1+deb10u2) ...
#8 92.10 Setting up libsqlite3-dev:amd64 (3.27.2-3+deb10u2) ...
#8 92.15 Setting up uuid-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 92.21 Setting up stow (2.2.2-1) ...
#8 92.27 Setting up libio-html-perl (1.001-1) ...
#8 92.32 Setting up libb-hooks-op-check-perl (0.22-1+b1) ...
#8 92.37 Setting up libsctp-dev:amd64 (1.0.18+dfsg-1) ...
#8 92.43 Setting up libbctoolbox-dev (0.6.0-2+b2) ...
#8 92.49 Setting up libdpkg-perl (1.19.8) ...
#8 92.54 Setting up autoconf (2.69-11) ...
#8 92.61 Setting up cppcheck (1.86-1) ...
#8 92.66 Setting up libsub-exporter-progressive-perl (0.001013-1) ...
#8 92.71 Setting up libtimedate-perl (2.3000-2+deb10u1) ...
#8 92.77 Setting up module-assistant (0.11.10) ...
#8 92.83 Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-1+deb10u2) ...
#8 92.89 Setting up g++-8 (8.3.0-6) ...
#8 92.94 Setting up libncurses5-dev:amd64 (6.1+20181013-2+deb10u5) ...
#8 92.99 Setting up gnupg (2.2.12-1+deb10u2) ...
#8 93.05 Setting up python3-dateutil (2.7.3-3) ...
#8 93.18 Setting up libdevel-globaldestruction-perl (0.14-1) ...
#8 93.23 Setting up libstrictures-perl (2.000005-1) ...
#8 93.29 Setting up libsub-quote-perl (2.005001-1) ...
#8 93.34 Setting up python3-lib2to3 (3.7.3-1) ...
#8 93.44 Setting up libfftw3-dev:amd64 (3.3.8-2) ...
#8 93.49 Setting up liburi-perl (1.76-1) ...
#8 93.54 Setting up libortp13:amd64 (1:1.0.2-1) ...
#8 93.59 Setting up libnet-ssleay-perl (1.85-2+deb10u1) ...
#8 93.65 Setting up python3-pkg-resources (40.8.0-1) ...
#8 93.80 Setting up automake (1:1.16.1-4) ...
#8 93.84 update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
#8 93.87 Setting up python3-distutils (3.7.3-1) ...
#8 93.99 Setting up libgnutls28-dev:amd64 (3.6.7-4+deb10u12) ...
#8 94.04 Setting up libglib2.0-dev-bin (2.58.3-2+deb10u5) ...
#8 94.18 Setting up libblkid-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 94.24 Setting up libhttp-date-perl (6.02-1) ...
#8 94.30 Setting up libfile-which-perl (1.23-1) ...
#8 94.35 Setting up libpcap-dev:amd64 (1.8.1-6+deb10u1) ...
#8 94.40 Setting up libfile-listing-perl (6.04-1) ...
#8 94.45 Setting up libdynaloader-functions-perl (0.003-1) ...
#8 94.51 Setting up libclass-method-modifiers-perl (2.12-1) ...
#8 94.56 Setting up libio-pty-perl (1:1.08-1.1+b5) ...
#8 94.61 Setting up libselinux1-dev:amd64 (2.8-1+b1) ...
#8 94.66 Setting up libarchive-zip-perl (1.64-1) ...
#8 94.72 Setting up libhtml-tagset-perl (3.20-3) ...
#8 94.77 Setting up liblwp-mediatypes-perl (6.02-1) ...
#8 94.82 Setting up libtry-tiny-perl (0.30-1) ...
#8 94.88 Setting up libnet-http-perl (6.18-1) ...
#8 94.94 Setting up libencode-locale-perl (1.05-1) ...
#8 94.99 Setting up libdevel-callchecker-perl (0.008-1) ...
#8 95.04 Setting up autogen (1:5.18.12-4) ...
#8 95.10 Setting up dpkg-dev (1.19.8) ...
#8 95.18 Setting up intltool-debian (0.35.0+20060710.5) ...
#8 95.24 Setting up liberror-perl (0.17027-2) ...
#8 95.29 Setting up patchutils (0.3.4-2) ...
#8 95.34 Setting up pkg-config (0.29-6) ...
#8 95.43 Setting up libipc-run-perl (20180523.0-1) ...
#8 95.48 Setting up git (1:2.20.1-2+deb10u8) ...
#8 95.60 Setting up libwww-robotrules-perl (6.02-1) ...
#8 95.65 Setting up g++ (4:8.3.0-1) ...
#8 95.71 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
#8 95.74 Setting up libhtml-parser-perl (3.72-3+b3) ...
#8 95.79 Setting up librole-tiny-perl (2.000006-1) ...
#8 95.85 Setting up build-essential (12.6) ...
#8 95.94 Setting up libfile-homedir-perl (1.004-1) ...
#8 95.99 Setting up libgps-dev (3.17-7) ...
#8 96.04 Setting up libmount-dev:amd64 (2.33.1-0.1+deb10u1) ...
#8 96.10 Setting up libio-socket-ssl-perl (2.060-3) ...
#8 96.15 Setting up libortp-dev:amd64 (1:1.0.2-1) ...
#8 96.20 Setting up libhttp-message-perl (6.18-1) ...
#8 96.25 Setting up libfile-stripnondeterminism-perl (1.1.2-1) ...
#8 96.30 Setting up libhttp-negotiate-perl (6.01-1) ...
#8 96.35 Setting up libhttp-cookies-perl (6.04-1) ...
#8 96.40 Setting up po-debconf (1.0.21) ...
#8 96.45 Setting up libhtml-tree-perl (5.07-2) ...
#8 96.50 Setting up libparams-classify-perl (0.015-1+b1) ...
#8 96.55 Setting up libtalloc-dev:amd64 (2.1.14-2) ...
#8 96.60 Setting up libglib2.0-dev:amd64 (2.58.3-2+deb10u5) ...
#8 96.65 Setting up libmodule-runtime-perl (0.016-1) ...
#8 96.70 Setting up libsofia-sip-ua-glib-dev (1.12.11+20110422.1-2.1+deb10u4) ...
#8 96.75 Setting up libimport-into-perl (1.002005-1) ...
#8 96.80 Setting up libmoo-perl (2.003004-2) ...
#8 96.85 Setting up dh-autoreconf (19) ...
#8 96.90 Setting up liblwp-protocol-https-perl (6.07-2) ...
#8 96.95 Setting up libwww-perl (6.36-2) ...
#8 97.01 Setting up debhelper (12.1.1) ...
#8 97.06 Setting up devscripts (2.19.5+deb10u1) ...
#8 97.24 Setting up git-buildpackage (0.9.14) ...
#8 97.44 Setting up dh-strip-nondeterminism (1.1.2-1) ...
#8 97.49 Setting up equivs (2.2.0) ...
#8 97.55 Setting up dh-systemd (12.1.1) ...
#8 97.60 Setting up dahdi-source (1:2.11.1.0.20170917~dfsg-7) ...
#8 97.65 Processing triggers for libc-bin (2.28-10+deb10u2) ...
#8 97.72 Processing triggers for ca-certificates (20200601~deb10u2) ...
#8 97.75 Updating certificates in /etc/ssl/certs...
#8 99.00 0 added, 0 removed; done.
#8 99.00 Running hooks in /etc/ca-certificates/update.d...
#8 99.00 done.
#8 DONE 99.3s
#9 [3/6] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh
#9 DONE 0.2s
#10 [4/6] COPY .COMMON/RELEASE.KEY /tmp/Release.key
#10 DONE 0.1s
#11 [5/6] RUN APT-KEY add /tmp/Release.key && rm /tmp/Release.key && echo "deb " https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10/ " ./" > /etc/apt/sources.list.d/osmocom-nightly.list
#11 0.359 Warning: apt-key output should not be parsed (stdout is not a terminal)
#11 1.074 OK
#11 DONE 1.2s
#12 [6/6] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_10//RELEASE /tmp/Release
#12 DONE 0.1s
#13 exporting to image
#13 exporting layers
#13 exporting layers 16.9s done
#13 writing image sha256:f3607321f69660e37e142472c6c995f450fe02a06a1b76e086cbf99c96b9157f done
#13 naming to docker.io/osmocom-build/debian-buster-build:latest 0.0s done
#13 DONE 16.9s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/debian-buster-build'
+ docker_image_exists debian-buster-build
+ docker images -q osmocom-build/debian-buster-build
+ test -n f3607321f696
+ list_osmo_packages debian-buster debian-buster-build
+ local distro=debian-buster
+ local image=debian-buster-build
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-buster-build -c
+ [ -n ]
+ return
+ [ registry.osmocom.org = registry.osmocom.org ]
+ docker_depends sigtran-tests
+ local feed
+ depends=
+ [ -n ]
+ docker_distro_from_image_name sigtran-tests
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z ]
+ docker_upstream_distro_from_image_name sigtran-tests
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name sigtran-tests
+ echo sigtran-tests
+ dir=sigtran-tests
+ pull_arg=--pull
+ grep ^FROM ../sigtran-tests/Dockerfile
+ from_line=FROM $USER/debian-buster-build
+ echo FROM $USER/debian-buster-build
+ grep -q $USER
+ pull_arg=
+ set +x
Building image: sigtran-tests (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ docker_osmo_ttcn3_branch
+ [ -n ]
+ echo master
+ make -C ../sigtran-tests BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/sigtran-tests OSMO_TTCN3_BRANCH=master
make: Entering directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/sigtran-tests'
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r /home/osmocom-build/jenkins/workspace/nplab-m3ua-test/common .common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bookworm \
--build-arg DISTRO=debian-bookworm \
--build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg ASTERISK_BRANCH=sysmocom/master \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_DIA2GSUP_BRANCH=master \
--build-arg OSMO_EPDG_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
-t osmocom-build/sigtran-tests:latest .
#0 building with "default" instance using docker driver
#1 [internal] load .dockerignore
#1 transferring context: 2B done
#1 DONE 0.0s
#2 [internal] load build definition from Dockerfile
#2 transferring dockerfile: 545B done
#2 DONE 0.0s
#3 [internal] load metadata for docker.io/osmocom-build/debian-buster-build:latest
#3 DONE 0.0s
#4 [1/4] FROM docker.io/osmocom-build/debian-buster-build
#4 DONE 0.2s
#5 [2/4] RUN APT-GET update && apt-get -y install guile-2.0 guile-2.0-dev gnulib tcsh python3 python3-pip
#5 0.380 Hit:1 http://deb.debian.org/debian buster InRelease
#5 0.380 Hit:2 http://deb.debian.org/debian-security buster/updates InRelease
#5 0.381 Hit:3 http://deb.debian.org/debian buster-updates InRelease
#5 0.709 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease [1570 B]
#5 1.365 Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ Packages [119 kB]
#5 1.416 Fetched 121 kB in 1s (112 kB/s)
#5 1.416 Reading package lists...
#5 1.714 Reading package lists...
#5 1.994 Building dependency tree...
#5 2.041 Reading state information...
#5 2.086 python3 is already the newest version (3.7.3-1).
#5 2.086 python3 set to manually installed.
#5 2.086 The following additional packages will be installed:
#5 2.086 dbus dh-python gir1.2-glib-2.0 gperf libapparmor1 libexpat1-dev libgc-dev
#5 2.086 libgirepository-1.0-1 libltdl-dev libpython3-dev libpython3.7
#5 2.086 libpython3.7-dev libtext-unidecode-perl libxml-libxml-perl
#5 2.086 libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl
#5 2.086 libxml-sax-expat-perl libxml-sax-perl python-pip-whl python3-asn1crypto
#5 2.086 python3-cffi-backend python3-crypto python3-cryptography python3-dbus
#5 2.086 python3-dev python3-entrypoints python3-gi python3-keyring
#5 2.086 python3-keyrings.alt python3-secretstorage python3-setuptools python3-wheel
#5 2.086 python3-xdg python3.7-dev tex-common texinfo ucf
#5 2.086 Suggested packages:
#5 2.086 default-dbus-session-bus | dbus-session-bus clisp guile-2.0-doc libtool-doc
#5 2.086 libxml-sax-expatxs-perl python-crypto-doc python-cryptography-doc
#5 2.086 python3-cryptography-vectors python-dbus-doc python3-dbus-dbg gnome-keyring
#5 2.086 libkf5wallet-bin gir1.2-gnomekeyring-1.0 python-secretstorage-doc
#5 2.086 python-setuptools-doc texlive-base texlive-latex-base
#5 2.086 texlive-generic-recommended texinfo-doc-nonfree texlive-fonts-recommended
#5 2.224 The following NEW packages will be installed:
#5 2.224 dbus dh-python gir1.2-glib-2.0 gnulib gperf guile-2.0 guile-2.0-dev
#5 2.224 libapparmor1 libexpat1-dev libgc-dev libgirepository-1.0-1 libltdl-dev
#5 2.224 libpython3-dev libpython3.7 libpython3.7-dev libtext-unidecode-perl
#5 2.224 libxml-libxml-perl libxml-namespacesupport-perl libxml-parser-perl
#5 2.224 libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl python-pip-whl
#5 2.224 python3-asn1crypto python3-cffi-backend python3-crypto python3-cryptography
#5 2.224 python3-dbus python3-dev python3-entrypoints python3-gi python3-keyring
#5 2.224 python3-keyrings.alt python3-pip python3-secretstorage python3-setuptools
#5 2.224 python3-wheel python3-xdg python3.7-dev tcsh tex-common texinfo ucf
#5 2.242 0 upgraded, 43 newly installed, 0 to remove and 0 not upgraded.
#5 2.242 Need to get 63.0 MB of archives.
#5 2.242 After this operation, 161 MB of additional disk space will be used.
#5 2.242 Get:1 http://deb.debian.org/debian buster/main amd64 ucf all 3.0038+nmu1 [69.0 kB]
#5 2.275 Get:2 http://deb.debian.org/debian buster/main amd64 tex-common all 6.11 [53.1 kB]
#5 2.277 Get:3 http://deb.debian.org/debian buster/main amd64 libapparmor1 amd64 2.13.2-10 [94.7 kB]
#5 2.282 Get:4 http://deb.debian.org/debian-security buster/updates/main amd64 dbus amd64 1.12.28-0+deb10u1 [240 kB]
#5 2.289 Get:5 http://deb.debian.org/debian buster/main amd64 dh-python all 3.20190308 [99.3 kB]
#5 2.291 Get:6 http://deb.debian.org/debian buster/main amd64 libgirepository-1.0-1 amd64 1.58.3-2 [92.8 kB]
#5 2.293 Get:7 http://deb.debian.org/debian buster/main amd64 gir1.2-glib-2.0 amd64 1.58.3-2 [143 kB]
#5 2.295 Get:8 http://deb.debian.org/debian buster/main amd64 gperf amd64 3.1-1 [147 kB]
#5 2.296 Get:9 http://deb.debian.org/debian buster/main amd64 libtext-unidecode-perl all 1.30-1 [103 kB]
#5 2.297 Get:10 http://deb.debian.org/debian buster/main amd64 libxml-namespacesupport-perl all 1.12-1 [14.8 kB]
#5 2.298 Get:11 http://deb.debian.org/debian buster/main amd64 libxml-sax-base-perl all 1.09-1 [20.4 kB]
#5 2.298 Get:12 http://deb.debian.org/debian buster/main amd64 libxml-sax-perl all 1.00+dfsg-1 [58.6 kB]
#5 2.306 Get:13 http://deb.debian.org/debian buster/main amd64 libxml-libxml-perl amd64 2.0134+dfsg-1 [344 kB]
#5 2.308 Get:14 http://deb.debian.org/debian buster/main amd64 texinfo amd64 6.5.0.dfsg.1-4+b1 [1431 kB]
#5 2.326 Get:15 http://deb.debian.org/debian buster/main amd64 gnulib all 20140202+stable-4 [4408 kB]
#5 2.361 Get:16 http://deb.debian.org/debian buster/main amd64 guile-2.0 amd64 2.0.13+1-5.1 [18.1 kB]
#5 2.361 Get:17 http://deb.debian.org/debian buster/main amd64 libltdl-dev amd64 2.4.6-9 [162 kB]
#5 2.362 Get:18 http://deb.debian.org/debian buster/main amd64 libgc-dev amd64 1:7.6.4-0.4 [373 kB]
#5 2.364 Get:19 http://deb.debian.org/debian buster/main amd64 guile-2.0-dev amd64 2.0.13+1-5.1 [699 kB]
#5 2.369 Get:20 http://deb.debian.org/debian-security buster/updates/main amd64 libexpat1-dev amd64 2.2.6-2+deb10u7 [156 kB]
#5 2.370 Get:21 http://deb.debian.org/debian-security buster/updates/main amd64 libpython3.7 amd64 3.7.3-2+deb10u7 [1499 kB]
#5 2.392 Get:22 http://deb.debian.org/debian-security buster/updates/main amd64 libpython3.7-dev amd64 3.7.3-2+deb10u7 [48.4 MB]
#5 2.814 Get:23 http://deb.debian.org/debian buster/main amd64 libpython3-dev amd64 3.7.3-1 [20.1 kB]
#5 2.814 Get:24 http://deb.debian.org/debian buster/main amd64 libxml-parser-perl amd64 2.44-4 [213 kB]
#5 2.815 Get:25 http://deb.debian.org/debian buster/main amd64 libxml-sax-expat-perl all 0.51-1 [12.0 kB]
#5 2.815 Get:26 http://deb.debian.org/debian buster/main amd64 python-pip-whl all 18.1-5 [1591 kB]
#5 2.867 Get:27 http://deb.debian.org/debian buster/main amd64 python3-asn1crypto all 0.24.0-1 [78.2 kB]
#5 2.869 Get:28 http://deb.debian.org/debian buster/main amd64 python3-cffi-backend amd64 1.12.2-1 [79.7 kB]
#5 2.872 Get:29 http://deb.debian.org/debian buster/main amd64 python3-crypto amd64 2.6.1-9+b1 [263 kB]
#5 2.874 Get:30 http://deb.debian.org/debian-security buster/updates/main amd64 python3-cryptography amd64 2.6.1-3+deb10u4 [218 kB]
#5 2.876 Get:31 http://deb.debian.org/debian buster/main amd64 python3-dbus amd64 1.2.8-3 [103 kB]
#5 2.877 Get:32 http://deb.debian.org/debian-security buster/updates/main amd64 python3.7-dev amd64 3.7.3-2+deb10u7 [514 kB]
#5 2.881 Get:33 http://deb.debian.org/debian buster/main amd64 python3-dev amd64 3.7.3-1 [1264 B]
#5 2.881 Get:34 http://deb.debian.org/debian buster/main amd64 python3-entrypoints all 0.3-1 [5508 B]
#5 2.881 Get:35 http://deb.debian.org/debian buster/main amd64 python3-gi amd64 3.30.4-1 [180 kB]
#5 2.883 Get:36 http://deb.debian.org/debian buster/main amd64 python3-secretstorage all 2.3.1-2 [14.2 kB]
#5 2.883 Get:37 http://deb.debian.org/debian buster/main amd64 python3-keyring all 17.1.1-1 [43.1 kB]
#5 2.883 Get:38 http://deb.debian.org/debian buster/main amd64 python3-keyrings.alt all 3.1.1-1 [18.2 kB]
#5 2.884 Get:39 http://deb.debian.org/debian buster/main amd64 python3-pip all 18.1-5 [171 kB]
#5 2.885 Get:40 http://deb.debian.org/debian buster/main amd64 python3-setuptools all 40.8.0-1 [306 kB]
#5 2.888 Get:41 http://deb.debian.org/debian buster/main amd64 python3-wheel all 0.32.3-2 [19.4 kB]
#5 2.888 Get:42 http://deb.debian.org/debian buster/main amd64 python3-xdg all 0.25-5 [35.9 kB]
#5 2.889 Get:43 http://deb.debian.org/debian buster/main amd64 tcsh amd64 6.20.00-7+b1 [473 kB]
#5 2.972 debconf: delaying package configuration, since apt-utils is not installed
#5 3.009 Fetched 63.0 MB in 1s (94.9 MB/s)
#5 3.116 Selecting previously unselected package ucf.
#5 3.116 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 25269 files and directories currently installed.)
#5 3.126 Preparing to unpack .../00-ucf_3.0038+nmu1_all.deb ...
#5 3.145 Moving old data out of the way
#5 3.148 Unpacking ucf (3.0038+nmu1) ...
#5 3.326 Selecting previously unselected package tex-common.
#5 3.331 Preparing to unpack .../01-tex-common_6.11_all.deb ...
#5 3.380 Unpacking tex-common (6.11) ...
#5 3.613 Selecting previously unselected package libapparmor1:amd64.
#5 3.618 Preparing to unpack .../02-libapparmor1_2.13.2-10_amd64.deb ...
#5 3.653 Unpacking libapparmor1:amd64 (2.13.2-10) ...
#5 3.813 Selecting previously unselected package dbus.
#5 3.818 Preparing to unpack .../03-dbus_1.12.28-0+deb10u1_amd64.deb ...
#5 3.857 Unpacking dbus (1.12.28-0+deb10u1) ...
#5 4.040 Selecting previously unselected package dh-python.
#5 4.045 Preparing to unpack .../04-dh-python_3.20190308_all.deb ...
#5 4.066 Unpacking dh-python (3.20190308) ...
#5 4.211 Selecting previously unselected package libgirepository-1.0-1:amd64.
#5 4.216 Preparing to unpack .../05-libgirepository-1.0-1_1.58.3-2_amd64.deb ...
#5 4.234 Unpacking libgirepository-1.0-1:amd64 (1.58.3-2) ...
#5 4.352 Selecting previously unselected package gir1.2-glib-2.0:amd64.
#5 4.357 Preparing to unpack .../06-gir1.2-glib-2.0_1.58.3-2_amd64.deb ...
#5 4.375 Unpacking gir1.2-glib-2.0:amd64 (1.58.3-2) ...
#5 4.508 Selecting previously unselected package gperf.
#5 4.513 Preparing to unpack .../07-gperf_3.1-1_amd64.deb ...
#5 4.531 Unpacking gperf (3.1-1) ...
#5 4.654 Selecting previously unselected package libtext-unidecode-perl.
#5 4.659 Preparing to unpack .../08-libtext-unidecode-perl_1.30-1_all.deb ...
#5 4.677 Unpacking libtext-unidecode-perl (1.30-1) ...
#5 4.811 Selecting previously unselected package libxml-namespacesupport-perl.
#5 4.816 Preparing to unpack .../09-libxml-namespacesupport-perl_1.12-1_all.deb ...
#5 4.834 Unpacking libxml-namespacesupport-perl (1.12-1) ...
#5 4.947 Selecting previously unselected package libxml-sax-base-perl.
#5 4.952 Preparing to unpack .../10-libxml-sax-base-perl_1.09-1_all.deb ...
#5 4.970 Unpacking libxml-sax-base-perl (1.09-1) ...
#5 5.109 Selecting previously unselected package libxml-sax-perl.
#5 5.113 Preparing to unpack .../11-libxml-sax-perl_1.00+dfsg-1_all.deb ...
#5 5.133 Unpacking libxml-sax-perl (1.00+dfsg-1) ...
#5 5.255 Selecting previously unselected package libxml-libxml-perl.
#5 5.260 Preparing to unpack .../12-libxml-libxml-perl_2.0134+dfsg-1_amd64.deb ...
#5 5.278 Unpacking libxml-libxml-perl (2.0134+dfsg-1) ...
#5 5.428 Selecting previously unselected package texinfo.
#5 5.433 Preparing to unpack .../13-texinfo_6.5.0.dfsg.1-4+b1_amd64.deb ...
#5 5.463 Unpacking texinfo (6.5.0.dfsg.1-4+b1) ...
#5 5.667 Selecting previously unselected package gnulib.
#5 5.672 Preparing to unpack .../14-gnulib_20140202+stable-4_all.deb ...
#5 5.690 Unpacking gnulib (20140202+stable-4) ...
#5 6.327 Selecting previously unselected package guile-2.0.
#5 6.338 Preparing to unpack .../15-guile-2.0_2.0.13+1-5.1_amd64.deb ...
#5 6.356 Unpacking guile-2.0 (2.0.13+1-5.1) ...
#5 6.466 Selecting previously unselected package libltdl-dev:amd64.
#5 6.471 Preparing to unpack .../16-libltdl-dev_2.4.6-9_amd64.deb ...
#5 6.488 Unpacking libltdl-dev:amd64 (2.4.6-9) ...
#5 6.617 Selecting previously unselected package libgc-dev:amd64.
#5 6.622 Preparing to unpack .../17-libgc-dev_1%3a7.6.4-0.4_amd64.deb ...
#5 6.643 Unpacking libgc-dev:amd64 (1:7.6.4-0.4) ...
#5 6.769 Selecting previously unselected package guile-2.0-dev.
#5 6.776 Preparing to unpack .../18-guile-2.0-dev_2.0.13+1-5.1_amd64.deb ...
#5 6.793 Unpacking guile-2.0-dev (2.0.13+1-5.1) ...
#5 6.940 Selecting previously unselected package libexpat1-dev:amd64.
#5 6.948 Preparing to unpack .../19-libexpat1-dev_2.2.6-2+deb10u7_amd64.deb ...
#5 6.966 Unpacking libexpat1-dev:amd64 (2.2.6-2+deb10u7) ...
#5 7.114 Selecting previously unselected package libpython3.7:amd64.
#5 7.119 Preparing to unpack .../20-libpython3.7_3.7.3-2+deb10u7_amd64.deb ...
#5 7.137 Unpacking libpython3.7:amd64 (3.7.3-2+deb10u7) ...
#5 7.306 Selecting previously unselected package libpython3.7-dev:amd64.
#5 7.311 Preparing to unpack .../21-libpython3.7-dev_3.7.3-2+deb10u7_amd64.deb ...
#5 7.329 Unpacking libpython3.7-dev:amd64 (3.7.3-2+deb10u7) ...
#5 9.239 Selecting previously unselected package libpython3-dev:amd64.
#5 9.246 Preparing to unpack .../22-libpython3-dev_3.7.3-1_amd64.deb ...
#5 9.264 Unpacking libpython3-dev:amd64 (3.7.3-1) ...
#5 9.370 Selecting previously unselected package libxml-parser-perl.
#5 9.377 Preparing to unpack .../23-libxml-parser-perl_2.44-4_amd64.deb ...
#5 9.395 Unpacking libxml-parser-perl (2.44-4) ...
#5 9.547 Selecting previously unselected package libxml-sax-expat-perl.
#5 9.554 Preparing to unpack .../24-libxml-sax-expat-perl_0.51-1_all.deb ...
#5 9.572 Unpacking libxml-sax-expat-perl (0.51-1) ...
#5 9.685 Selecting previously unselected package python-pip-whl.
#5 9.692 Preparing to unpack .../25-python-pip-whl_18.1-5_all.deb ...
#5 9.710 Unpacking python-pip-whl (18.1-5) ...
#5 9.902 Selecting previously unselected package python3-asn1crypto.
#5 9.908 Preparing to unpack .../26-python3-asn1crypto_0.24.0-1_all.deb ...
#5 9.925 Unpacking python3-asn1crypto (0.24.0-1) ...
#5 10.05 Selecting previously unselected package python3-cffi-backend.
#5 10.06 Preparing to unpack .../27-python3-cffi-backend_1.12.2-1_amd64.deb ...
#5 10.08 Unpacking python3-cffi-backend (1.12.2-1) ...
#5 10.22 Selecting previously unselected package python3-crypto.
#5 10.23 Preparing to unpack .../28-python3-crypto_2.6.1-9+b1_amd64.deb ...
#5 10.25 Unpacking python3-crypto (2.6.1-9+b1) ...
#5 10.39 Selecting previously unselected package python3-cryptography.
#5 10.39 Preparing to unpack .../29-python3-cryptography_2.6.1-3+deb10u4_amd64.deb ...
#5 10.41 Unpacking python3-cryptography (2.6.1-3+deb10u4) ...
#5 10.55 Selecting previously unselected package python3-dbus.
#5 10.56 Preparing to unpack .../30-python3-dbus_1.2.8-3_amd64.deb ...
#5 10.57 Unpacking python3-dbus (1.2.8-3) ...
#5 10.70 Selecting previously unselected package python3.7-dev.
#5 10.71 Preparing to unpack .../31-python3.7-dev_3.7.3-2+deb10u7_amd64.deb ...
#5 10.72 Unpacking python3.7-dev (3.7.3-2+deb10u7) ...
#5 10.83 Selecting previously unselected package python3-dev.
#5 10.84 Preparing to unpack .../32-python3-dev_3.7.3-1_amd64.deb ...
#5 10.86 Unpacking python3-dev (3.7.3-1) ...
#5 10.99 Selecting previously unselected package python3-entrypoints.
#5 10.99 Preparing to unpack .../33-python3-entrypoints_0.3-1_all.deb ...
#5 11.01 Unpacking python3-entrypoints (0.3-1) ...
#5 11.14 Selecting previously unselected package python3-gi.
#5 11.15 Preparing to unpack .../34-python3-gi_3.30.4-1_amd64.deb ...
#5 11.16 Unpacking python3-gi (3.30.4-1) ...
#5 11.29 Selecting previously unselected package python3-secretstorage.
#5 11.30 Preparing to unpack .../35-python3-secretstorage_2.3.1-2_all.deb ...
#5 11.32 Unpacking python3-secretstorage (2.3.1-2) ...
#5 11.44 Selecting previously unselected package python3-keyring.
#5 11.45 Preparing to unpack .../36-python3-keyring_17.1.1-1_all.deb ...
#5 11.47 Unpacking python3-keyring (17.1.1-1) ...
#5 11.60 Selecting previously unselected package python3-keyrings.alt.
#5 11.61 Preparing to unpack .../37-python3-keyrings.alt_3.1.1-1_all.deb ...
#5 11.63 Unpacking python3-keyrings.alt (3.1.1-1) ...
#5 11.76 Selecting previously unselected package python3-pip.
#5 11.77 Preparing to unpack .../38-python3-pip_18.1-5_all.deb ...
#5 11.78 Unpacking python3-pip (18.1-5) ...
#5 11.92 Selecting previously unselected package python3-setuptools.
#5 11.93 Preparing to unpack .../39-python3-setuptools_40.8.0-1_all.deb ...
#5 11.95 Unpacking python3-setuptools (40.8.0-1) ...
#5 12.09 Selecting previously unselected package python3-wheel.
#5 12.09 Preparing to unpack .../40-python3-wheel_0.32.3-2_all.deb ...
#5 12.11 Unpacking python3-wheel (0.32.3-2) ...
#5 12.24 Selecting previously unselected package python3-xdg.
#5 12.25 Preparing to unpack .../41-python3-xdg_0.25-5_all.deb ...
#5 12.26 Unpacking python3-xdg (0.25-5) ...
#5 12.42 Selecting previously unselected package tcsh.
#5 12.43 Preparing to unpack .../42-tcsh_6.20.00-7+b1_amd64.deb ...
#5 12.47 Unpacking tcsh (6.20.00-7+b1) ...
#5 12.64 Setting up python3-entrypoints (0.3-1) ...
#5 12.75 Setting up dh-python (3.20190308) ...
#5 12.89 Setting up libxml-parser-perl (2.44-4) ...
#5 12.94 Setting up python3-dbus (1.2.8-3) ...
#5 13.07 Setting up libapparmor1:amd64 (2.13.2-10) ...
#5 13.13 Setting up python3-setuptools (40.8.0-1) ...
#5 13.31 Setting up libpython3.7:amd64 (3.7.3-2+deb10u7) ...
#5 13.36 Setting up guile-2.0 (2.0.13+1-5.1) ...
#5 13.41 update-alternatives: using /usr/lib/x86_64-linux-gnu/guile-2.0/bin/guile to provide /usr/bin/guile (guile) in auto mode
#5 13.44 Setting up libxml-namespacesupport-perl (1.12-1) ...
#5 13.49 Setting up python3-xdg (0.25-5) ...
#5 13.62 Setting up gperf (3.1-1) ...
#5 13.67 Setting up python3-wheel (0.32.3-2) ...
#5 13.79 Setting up libltdl-dev:amd64 (2.4.6-9) ...
#5 13.84 Setting up libxml-sax-base-perl (1.09-1) ...
#5 13.90 Setting up libexpat1-dev:amd64 (2.2.6-2+deb10u7) ...
#5 13.95 Setting up dbus (1.12.28-0+deb10u1) ...
#5 14.37 invoke-rc.d: could not determine current runlevel
#5 14.37 invoke-rc.d: policy-rc.d denied execution of start.
#5 14.39 Setting up ucf (3.0038+nmu1) ...
#5 14.50 debconf: unable to initialize frontend: Dialog
#5 14.50 debconf: (TERM is not set, so the dialog frontend is not usable.)
#5 14.50 debconf: falling back to frontend: Readline
#5 14.54 Setting up python3-crypto (2.6.1-9+b1) ...
#5 14.71 Setting up libgirepository-1.0-1:amd64 (1.58.3-2) ...
#5 14.76 Setting up python-pip-whl (18.1-5) ...
#5 14.82 Setting up libtext-unidecode-perl (1.30-1) ...
#5 14.87 Setting up libgc-dev:amd64 (1:7.6.4-0.4) ...
#5 14.92 Setting up python3-asn1crypto (0.24.0-1) ...
#5 15.05 Setting up tcsh (6.20.00-7+b1) ...
#5 15.18 update-alternatives: using /bin/tcsh to provide /bin/csh (csh) in auto mode
#5 15.25 Setting up python3-cffi-backend (1.12.2-1) ...
#5 15.31 Setting up libpython3.7-dev:amd64 (3.7.3-2+deb10u7) ...
#5 15.36 Setting up libxml-sax-perl (1.00+dfsg-1) ...
#5 15.48 update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10...
#5 15.51 update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
#5 15.57 debconf: unable to initialize frontend: Dialog
#5 15.57 debconf: (TERM is not set, so the dialog frontend is not usable.)
#5 15.57 debconf: falling back to frontend: Readline
#5 15.59
#5 15.59 Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version
#5 15.65 Setting up python3.7-dev (3.7.3-2+deb10u7) ...
#5 15.70 Setting up tex-common (6.11) ...
#5 15.80 debconf: unable to initialize frontend: Dialog
#5 15.80 debconf: (TERM is not set, so the dialog frontend is not usable.)
#5 15.80 debconf: falling back to frontend: Readline
#5 15.84 update-language: texlive-base not installed and configured, doing nothing!
#5 15.95 Setting up python3-cryptography (2.6.1-3+deb10u4) ...
#5 16.13 Setting up gir1.2-glib-2.0:amd64 (1.58.3-2) ...
#5 16.18 Setting up python3-pip (18.1-5) ...
#5 16.35 Setting up libxml-libxml-perl (2.0134+dfsg-1) ...
#5 16.41 update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50...
#5 16.44 update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50...
#5 16.47 update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
#5 16.52 debconf: unable to initialize frontend: Dialog
#5 16.52 debconf: (TERM is not set, so the dialog frontend is not usable.)
#5 16.52 debconf: falling back to frontend: Readline
#5 16.55 Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
#5 16.64 Setting up libxml-sax-expat-perl (0.51-1) ...
#5 16.69 update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::Expat with priority 50...
#5 16.72 update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
#5 16.77 debconf: unable to initialize frontend: Dialog
#5 16.77 debconf: (TERM is not set, so the dialog frontend is not usable.)
#5 16.77 debconf: falling back to frontend: Readline
#5 16.81 Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
#5 16.89 Setting up python3-keyrings.alt (3.1.1-1) ...
#5 17.02 Setting up guile-2.0-dev (2.0.13+1-5.1) ...
#5 17.07 Setting up libpython3-dev:amd64 (3.7.3-1) ...
#5 17.13 Setting up python3-secretstorage (2.3.1-2) ...
#5 17.25 Setting up python3-dev (3.7.3-1) ...
#5 17.30 Setting up python3-gi (3.30.4-1) ...
#5 17.44 Setting up texinfo (6.5.0.dfsg.1-4+b1) ...
#5 17.54 Setting up gnulib (20140202+stable-4) ...
#5 17.60 Setting up python3-keyring (17.1.1-1) ...
#5 17.72 Processing triggers for man-db (2.8.5-2+deb10u1) ...
#5 18.46 Processing triggers for libc-bin (2.28-10+deb10u2) ...
#5 DONE 19.3s
#6 [3/4] RUN PIP3 install junit-xml
#6 0.864 Collecting junit-xml
#6 0.922 Downloading https://files.pythonhosted.org/packages/2a/93/2d896b5fd3d79b4cadd8882c06650e66d003f465c9d12c488d92853dff78/junit_xml-1.9-py2.py3-none-any.whl
#6 0.929 Requirement already satisfied: six in /usr/lib/python3/dist-packages (from junit-xml) (1.12.0)
#6 0.937 Installing collected packages: junit-xml
#6 0.967 Successfully installed junit-xml-1.9
#6 DONE 1.0s
#7 [4/4] RUN CD /tmp && git clone https://github.com/nplab/guile-sctp && cd guile-sctp && ./bootstrap && ./configure && make && make install
#7 0.426 Cloning into 'guile-sctp'...
#7 0.841 + [ -e /usr/local/bin/glibtoolize ]
#7 0.841 + [ -e /usr/bin/glibtoolize ]
#7 0.841 + [ -e /usr/local/bin/libtoolize ]
#7 0.841 + [ -e /usr/bin/libtoolize ]
#7 0.841 + /usr/bin/libtoolize --force
#7 0.987 libtoolize: putting auxiliary files in '.'.
#7 0.987 libtoolize: linking file './ltmain.sh'
#7 1.053 libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
#7 1.053 libtoolize: linking file 'm4/libtool.m4'
#7 1.069 libtoolize: linking file 'm4/ltoptions.m4'
#7 1.085 libtoolize: linking file 'm4/ltsugar.m4'
#7 1.100 libtoolize: linking file 'm4/ltversion.m4'
#7 1.115 libtoolize: linking file 'm4/lt~obsolete.m4'
#7 1.134 + [ -e /usr/local/share/aclocal ]
#7 1.134 + aclocal
#7 2.520 + autoheader
#7 2.681 + autoconf
#7 2.783 + automake --foreign --add-missing --copy
#7 3.238 configure.ac:12: installing './compile'
#7 3.241 configure.ac:11: installing './config.guess'
#7 3.244 configure.ac:11: installing './config.sub'
#7 3.247 configure.ac:7: installing './install-sh'
#7 3.251 configure.ac:7: installing './missing'
#7 3.268 Makefile.am: installing './depcomp'
#7 3.465 checking for a BSD-compatible install... /usr/bin/install -c
#7 3.491 checking whether build environment is sane... yes
#7 3.519 checking for a thread-safe mkdir -p... /bin/mkdir -p
#7 3.525 checking for gawk... gawk
#7 3.526 checking whether make sets $(MAKE)... yes
#7 3.554 checking whether make supports nested variables... yes
#7 3.606 checking build system type... x86_64-pc-linux-gnu
#7 3.746 checking host system type... x86_64-pc-linux-gnu
#7 3.747 checking for gcc... gcc
#7 3.807 checking whether the C compiler works... yes
#7 3.854 checking for C compiler default output file name... a.out
#7 3.855 checking for suffix of executables...
#7 3.892 checking whether we are cross compiling... no
#7 3.918 checking for suffix of object files... o
#7 3.948 checking whether we are using the GNU C compiler... yes
#7 3.981 checking whether gcc accepts -g... yes
#7 4.014 checking for gcc option to accept ISO C89... none needed
#7 4.047 checking whether gcc understands -c and -o together... yes
#7 4.088 checking whether make supports the include directive... yes (GNU style)
#7 4.109 checking dependency style of gcc... gcc3
#7 4.201 checking how to print strings... printf
#7 4.230 checking for a sed that does not truncate output... /bin/sed
#7 4.233 checking for grep that handles long lines and -e... /bin/grep
#7 4.234 checking for egrep... /bin/grep -E
#7 4.235 checking for fgrep... /bin/grep -F
#7 4.235 checking for ld used by gcc... /usr/bin/ld
#7 4.238 checking if the linker (/usr/bin/ld) is GNU ld... yes
#7 4.239 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
#7 4.240 checking the name lister (/usr/bin/nm -B) interface... BSD nm
#7 4.254 checking whether ln -s works... yes
#7 4.254 checking the maximum length of command line arguments... 1572864
#7 4.259 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
#7 4.259 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
#7 4.259 checking for /usr/bin/ld option to reload object files... -r
#7 4.260 checking for objdump... objdump
#7 4.260 checking how to recognize dependent libraries... pass_all
#7 4.261 checking for dlltool... no
#7 4.261 checking how to associate runtime and link libraries... printf %s\n
#7 4.261 checking for ar... ar
#7 4.262 checking for archiver @FILE support... @
#7 4.300 checking for strip... strip
#7 4.301 checking for ranlib... ranlib
#7 4.302 checking command to parse /usr/bin/nm -B output from gcc object... ok
#7 4.416 checking for sysroot... no
#7 4.416 checking for a working dd... /bin/dd
#7 4.421 checking how to truncate binary pipes... /bin/dd bs=4096 count=1
#7 4.463 checking for mt... no
#7 4.464 checking if : is a manifest tool... no
#7 4.477 checking how to run the C preprocessor... gcc -E
#7 4.598 checking for ANSI C header files... yes
#7 4.724 checking for sys/types.h... yes
#7 4.748 checking for sys/stat.h... yes
#7 4.787 checking for stdlib.h... yes
#7 4.827 checking for string.h... yes
#7 4.866 checking for memory.h... yes
#7 4.906 checking for strings.h... yes
#7 4.944 checking for inttypes.h... yes
#7 4.985 checking for stdint.h... yes
#7 5.014 checking for unistd.h... yes
#7 5.042 checking for dlfcn.h... yes
#7 5.069 checking for objdir... .libs
#7 5.148 checking if gcc supports -fno-rtti -fno-exceptions... no
#7 5.170 checking for gcc option to produce PIC... -fPIC -DPIC
#7 5.171 checking if gcc PIC flag -fPIC -DPIC works... yes
#7 5.217 checking if gcc static flag -static works... yes
#7 5.280 checking if gcc supports -c -o file.o... yes
#7 5.295 checking if gcc supports -c -o file.o... (cached) yes
#7 5.295 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
#7 5.302 checking whether -lc should be explicitly linked in... no
#7 5.339 checking dynamic linker characteristics... GNU/Linux ld.so
#7 5.419 checking how to hardcode library paths into programs... immediate
#7 5.419 checking whether stripping libraries is possible... yes
#7 5.422 checking if libtool supports shared libraries... yes
#7 5.422 checking whether to build shared libraries... yes
#7 5.422 checking whether to build static libraries... yes
#7 5.424 checking for pkg-config... /usr/bin/pkg-config
#7 5.425 checking pkg-config is at least version 0.9.0... yes
#7 5.428 configure: checking for guile 2.0
#7 5.433 configure: found guile 2.0
#7 5.434 checking for ld used by gcc... /usr/bin/ld -m elf_x86_64
#7 5.440 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
#7 5.446 checking for shared library run path origin... done
#7 5.475 checking for GUILE... yes
#7 5.499 checking for Guile site directory... /usr/share/guile/site/2.0
#7 5.512 checking for sys/types.h... (cached) yes
#7 5.531 checking sys/socket.h usability... yes
#7 5.575 checking sys/socket.h presence... yes
#7 5.595 checking for sys/socket.h... yes
#7 5.614 checking netinet/in.h usability... yes
#7 5.654 checking netinet/in.h presence... yes
#7 5.666 checking for netinet/in.h... yes
#7 5.681 checking netinet/sctp.h usability... yes
#7 5.719 checking netinet/sctp.h presence... yes
#7 5.729 checking for netinet/sctp.h... yes
#7 5.735 checking whether byte ordering is bigendian... no
#7 5.853 checking for working IPv6 support... yes
#7 5.892 checking whether sockaddr_in6 has sin6_scope_id... yes
#7 5.909 checking for struct sockaddr.sa_len... no
#7 5.939 checking for struct sockaddr_in.sin_len... no
#7 5.990 checking for struct sockaddr_in6.sin6_len... no
#7 6.038 checking for sctp_sendmsg in -lsctp... yes
#7 6.090 checking for sctp_recvmsg in -lsctp... yes
#7 6.134 checking for sctp_sendmsg... yes
#7 6.180 checking for sctp_recvmsg... yes
#7 6.263 checking that generated files are newer than configure... done
#7 6.264 configure: creating ./config.status
#7 7.550 config.status: creating Makefile
#7 7.583 config.status: creating config.h
#7 7.610 config.status: executing depfiles commands
#7 7.653 config.status: executing libtool commands
#7 7.739 guile-snarf -o guile-sctp.x -DHAVE_CONFIG_H -pthread -I/usr/include/guile/2.0 -g -O2 guile-sctp.c
#7 7.787 make all-am
#7 7.788 make[1]: Entering directory '/tmp/guile-sctp'
#7 7.788 /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c -o guile-sctp.lo guile-sctp.c
#7 7.807 libtool: compile: gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c guile-sctp.c -fPIC -DPIC -o .libs/guile-sctp.o
#7 7.912 libtool: compile: gcc -DHAVE_CONFIG_H -I. -pthread -I/usr/include/guile/2.0 -g -O2 -MT guile-sctp.lo -MD -MP -MF .deps/guile-sctp.Tpo -c guile-sctp.c -o guile-sctp.o >/dev/null 2>&1
#7 7.983 mv -f .deps/guile-sctp.Tpo .deps/guile-sctp.Plo
#7 7.984 /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -o libguile-net-sctp.la -rpath /usr/local/lib guile-sctp.lo -lsctp -lsctp
#7 8.017 libtool: link: gcc -shared -fPIC -DPIC .libs/guile-sctp.o -lsctp -g -O2 -Wl,-soname -Wl,libguile-net-sctp.so.0 -o .libs/libguile-net-sctp.so.0.0.0
#7 8.032 libtool: link: (cd ".libs" && rm -f "libguile-net-sctp.so.0" && ln -s "libguile-net-sctp.so.0.0.0" "libguile-net-sctp.so.0")
#7 8.037 libtool: link: (cd ".libs" && rm -f "libguile-net-sctp.so" && ln -s "libguile-net-sctp.so.0.0.0" "libguile-net-sctp.so")
#7 8.044 libtool: link: ar cru .libs/libguile-net-sctp.a guile-sctp.o
#7 8.046 ar: `u' modifier ignored since `D' is the default (see `U')
#7 8.048 libtool: link: ranlib .libs/libguile-net-sctp.a
#7 8.075 libtool: link: ( cd ".libs" && rm -f "libguile-net-sctp.la" && ln -s "../libguile-net-sctp.la" "libguile-net-sctp.la" )
#7 8.090 make[1]: Leaving directory '/tmp/guile-sctp'
#7 8.097 make install-am
#7 8.106 make[1]: Entering directory '/tmp/guile-sctp'
#7 8.128 make[2]: Entering directory '/tmp/guile-sctp'
#7 8.144 /bin/mkdir -p '/usr/local/lib'
#7 8.145 /bin/bash ./libtool --mode=install /usr/bin/install -c libguile-net-sctp.la '/usr/local/lib'
#7 8.183 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.so.0.0.0 /usr/local/lib/libguile-net-sctp.so.0.0.0
#7 8.184 libtool: install: (cd /usr/local/lib && { ln -s -f libguile-net-sctp.so.0.0.0 libguile-net-sctp.so.0 || { rm -f libguile-net-sctp.so.0 && ln -s libguile-net-sctp.so.0.0.0 libguile-net-sctp.so.0; }; })
#7 8.185 libtool: install: (cd /usr/local/lib && { ln -s -f libguile-net-sctp.so.0.0.0 libguile-net-sctp.so || { rm -f libguile-net-sctp.so && ln -s libguile-net-sctp.so.0.0.0 libguile-net-sctp.so; }; })
#7 8.187 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.lai /usr/local/lib/libguile-net-sctp.la
#7 8.188 libtool: install: /usr/bin/install -c .libs/libguile-net-sctp.a /usr/local/lib/libguile-net-sctp.a
#7 8.189 libtool: install: chmod 644 /usr/local/lib/libguile-net-sctp.a
#7 8.190 libtool: install: ranlib /usr/local/lib/libguile-net-sctp.a
#7 8.210 libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
#7 8.210 ----------------------------------------------------------------------
#7 8.210 Libraries have been installed in:
#7 8.210 /usr/local/lib
#7 8.210
#7 8.210 If you ever happen to want to link against installed libraries
#7 8.210 in a given directory, LIBDIR, you must either use libtool, and
#7 8.210 specify the full pathname of the library, or use the '-LLIBDIR'
#7 8.210 flag during linking and do at least one of the following:
#7 8.210 - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
#7 8.210 during execution
#7 8.210 - add LIBDIR to the 'LD_RUN_PATH' environment variable
#7 8.210 during linking
#7 8.211 - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
#7 8.211 - have your system administrator add LIBDIR to '/etc/ld.so.conf'
#7 8.211
#7 8.211 See any operating system documentation about shared libraries for
#7 8.211 more information, such as the ld(1) and ld.so(8) manual pages.
#7 8.211 ----------------------------------------------------------------------
#7 8.211 /bin/mkdir -p '/usr/share/guile/site/2.0/net'
#7 8.213 /usr/bin/install -c -m 644 sctp.scm '/usr/share/guile/site/2.0/net'
#7 8.213 make[2]: Leaving directory '/tmp/guile-sctp'
#7 8.214 make[1]: Leaving directory '/tmp/guile-sctp'
#7 DONE 8.3s
#8 exporting to image
#8 exporting layers
#8 exporting layers 1.8s done
#8 writing image sha256:9e967e16ab6b2f0b91737869af6ddceaa953716855a9ff7a67cd97bdce2d8fd6 done
#8 naming to docker.io/osmocom-build/sigtran-tests:latest 0.0s done
#8 DONE 1.8s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/sigtran-tests'
+ docker_image_exists sigtran-tests
+ docker images -q osmocom-build/sigtran-tests
+ test -n 9e967e16ab6b
+ list_osmo_packages debian-bookworm sigtran-tests
+ local distro=debian-bookworm
+ local image=sigtran-tests
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/sigtran-tests -c
+ [ -n ]
+ return
+ [ registry.osmocom.org = registry.osmocom.org ]
+ docker_depends osmo-stp-master
+ local feed
+ echo debian-bookworm-build
+ depends=debian-bookworm-build
+ [ -n debian-bookworm-build ]
+ docker_images_require debian-bookworm-build
+ local i
+ local from_line
+ local pull_arg
+ local upstream_distro_arg
+ local distro_arg
+ local depends
+ local dir
+ [ registry.osmocom.org = registry.osmocom.org ]
+ docker_depends debian-bookworm-build
+ local feed
+ depends=
+ [ -n ]
+ docker_distro_from_image_name debian-bookworm-build
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z ]
+ docker_upstream_distro_from_image_name debian-bookworm-build
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name debian-bookworm-build
+ echo debian-bookworm-build
+ dir=debian-bookworm-build
+ pull_arg=--pull
+ grep ^FROM ../debian-bookworm-build/Dockerfile
+ from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO}
+ grep -q $USER
+ echo FROM ${REGISTRY}/${UPSTREAM_DISTRO}
+ set +x
Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ docker_osmo_ttcn3_branch
+ [ -n ]
+ echo master
+ make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build OSMO_TTCN3_BRANCH=master
make: Entering directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/debian-bookworm-build'
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r /home/osmocom-build/jenkins/workspace/nplab-m3ua-test/common .common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bookworm \
--build-arg DISTRO=debian-bookworm \
--build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg ASTERISK_BRANCH=sysmocom/master \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_DIA2GSUP_BRANCH=master \
--build-arg OSMO_EPDG_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
--pull -t osmocom-build/debian-bookworm-build:latest .
#0 building with "default" instance using docker driver
#1 [internal] load .dockerignore
#1 transferring context: 2B done
#1 DONE 0.0s
#2 [internal] load build definition from Dockerfile
#2 transferring dockerfile: 5.77kB done
#2 DONE 0.1s
#3 [auth] sharing credentials for registry.osmocom.org
#3 DONE 0.0s
#4 [internal] load metadata for registry.osmocom.org/debian:bookworm
#4 DONE 0.1s
#5 [internal] load build context
#5 DONE 0.0s
#6 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt
#6 DONE 0.0s
#7 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:40f71cd223a60afc1bac2adf1b204bfabef29cdef725e74993f86098ff87f92f
#7 resolve registry.osmocom.org/debian:bookworm@sha256:40f71cd223a60afc1bac2adf1b204bfabef29cdef725e74993f86098ff87f92f 0.1s done
#7 DONE 0.1s
#8 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT
#8 DONE 0.2s
#5 [internal] load build context
#5 transferring context: 1.96kB done
#5 DONE 0.1s
#9 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release
#9 DONE 0.3s
#10 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format=TEXT
#10 DONE 0.3s
#11 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/master?format=TEXT
#11 DONE 0.3s
#12 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean
#12 CACHED
#13 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit
#13 CACHED
#14 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh
#14 CACHED
#15 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pylint' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt
#15 CACHED
#16 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt
#16 CACHED
#17 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc
#17 CACHED
#18 [ 4/16] RUN SET -x && useradd --uid=1000 build && mkdir /build && chown -R build:build /build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/
#18 CACHED
#19 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests
#19 CACHED
#20 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci
#20 CACHED
#21 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit
#21 CACHED
#22 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT=TEXT /tmp/osmo-gsm-manuals-commit
#22 CACHED
#23 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-14.0.0/LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets
#23 CACHED
#24 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals
#24 CACHED
#25 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release
#25 DONE 0.1s
#26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean
#26 0.328 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./
#26 0.328 + apt-get update
#26 0.395 Hit:1 http://deb.debian.org/debian bookworm InRelease
#26 0.395 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
#26 0.396 Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease [1576 B]
#26 0.398 Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease
#26 0.738 Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ Packages [159 kB]
#26 0.824 Fetched 216 kB in 0s (458 kB/s)
#26 0.824 Reading package lists...
#26 1.091 + apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev
#26 1.094 Reading package lists...
#26 1.354 Building dependency tree...
#26 1.407 Reading state information...
#26 1.470 The following additional packages will be installed:
#26 1.470 libcurl4-gnutls-dev liblimesuite23.11-1 libmicrohttpd-dev libmicrohttpd12
#26 1.470 liborcania-dev liborcania2.3 libsystemd-dev libuhd4.3.0 libulfius2.7
#26 1.471 libyder-dev libyder2.0
#26 1.471 Suggested packages:
#26 1.471 libcurl4-doc libidn-dev libldap2-dev librtmp-dev libssh2-1-dev uhd-doc
#26 1.471 uhd-host
#26 1.471 Recommended packages:
#26 1.471 limesuite-udev limesuite-images gnuradio-dev
#26 1.543 The following NEW packages will be installed:
#26 1.543 libcurl4-gnutls-dev liblimesuite-dev liblimesuite23.11-1 libmicrohttpd-dev
#26 1.543 libmicrohttpd12 liborcania-dev liborcania2.3 libsystemd-dev libuhd-dev
#26 1.543 libuhd4.3.0 libulfius-dev libulfius2.7 libyder-dev libyder2.0
#26 1.568 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded.
#26 1.568 Need to get 5782 kB of archives.
#26 1.568 After this operation, 24.8 MB of additional disk space will be used.
#26 1.568 Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ liblimesuite23.11-1 23.11.0.4.9dce.202404242026 [263 kB]
#26 1.572 Get:2 http://deb.debian.org/debian bookworm/main amd64 libcurl4-gnutls-dev amd64 7.88.1-10+deb12u5 [485 kB]
#26 1.596 Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ liblimesuite-dev 23.11.0.4.9dce.202404242026 [53.0 kB]
#26 1.601 Get:4 http://deb.debian.org/debian bookworm/main amd64 libmicrohttpd12 amd64 0.9.75-6 [119 kB]
#26 1.604 Get:5 http://deb.debian.org/debian bookworm/main amd64 libmicrohttpd-dev amd64 0.9.75-6 [291 kB]
#26 1.608 Get:6 http://deb.debian.org/debian bookworm/main amd64 liborcania2.3 amd64 2.3.2-1 [13.6 kB]
#26 1.608 Get:7 http://deb.debian.org/debian bookworm/main amd64 liborcania-dev amd64 2.3.2-1 [115 kB]
#26 1.610 Get:8 http://deb.debian.org/debian bookworm/main amd64 libsystemd-dev amd64 252.22-1~deb12u1 [353 kB]
#26 1.613 Get:9 http://deb.debian.org/debian bookworm/main amd64 libuhd4.3.0 amd64 4.3.0.0+ds1-5 [3445 kB]
#26 1.650 Get:10 http://deb.debian.org/debian bookworm/main amd64 libuhd-dev amd64 4.3.0.0+ds1-5 [219 kB]
#26 1.650 Get:11 http://deb.debian.org/debian bookworm/main amd64 libyder2.0 amd64 1.4.19-1 [9420 B]
#26 1.650 Get:12 http://deb.debian.org/debian bookworm/main amd64 libulfius2.7 amd64 2.7.13-1 [55.3 kB]
#26 1.651 Get:13 http://deb.debian.org/debian bookworm/main amd64 libyder-dev amd64 1.4.19-1 [103 kB]
#26 1.651 Get:14 http://deb.debian.org/debian bookworm/main amd64 libulfius-dev amd64 2.7.13-1 [256 kB]
#26 1.768 debconf: delaying package configuration, since apt-utils is not installed
#26 1.811 Fetched 5782 kB in 0s (54.8 MB/s)
#26 1.876 Selecting previously unselected package libcurl4-gnutls-dev:amd64.
#26 1.876 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 115013 files and directories currently installed.)
#26 1.916 Preparing to unpack .../00-libcurl4-gnutls-dev_7.88.1-10+deb12u5_amd64.deb ...
#26 1.932 Unpacking libcurl4-gnutls-dev:amd64 (7.88.1-10+deb12u5) ...
#26 2.107 Selecting previously unselected package liblimesuite23.11-1:amd64.
#26 2.114 Preparing to unpack .../01-liblimesuite23.11-1_23.11.0.4.9dce.202404242026_amd64.deb ...
#26 2.148 Unpacking liblimesuite23.11-1:amd64 (23.11.0.4.9dce.202404242026) ...
#26 2.290 Selecting previously unselected package liblimesuite-dev.
#26 2.308 Preparing to unpack .../02-liblimesuite-dev_23.11.0.4.9dce.202404242026_amd64.deb ...
#26 2.329 Unpacking liblimesuite-dev (23.11.0.4.9dce.202404242026) ...
#26 2.480 Selecting previously unselected package libmicrohttpd12:amd64.
#26 2.487 Preparing to unpack .../03-libmicrohttpd12_0.9.75-6_amd64.deb ...
#26 2.504 Unpacking libmicrohttpd12:amd64 (0.9.75-6) ...
#26 2.633 Selecting previously unselected package libmicrohttpd-dev:amd64.
#26 2.650 Preparing to unpack .../04-libmicrohttpd-dev_0.9.75-6_amd64.deb ...
#26 2.667 Unpacking libmicrohttpd-dev:amd64 (0.9.75-6) ...
#26 2.826 Selecting previously unselected package liborcania2.3:amd64.
#26 2.834 Preparing to unpack .../05-liborcania2.3_2.3.2-1_amd64.deb ...
#26 2.851 Unpacking liborcania2.3:amd64 (2.3.2-1) ...
#26 2.976 Selecting previously unselected package liborcania-dev:amd64.
#26 2.994 Preparing to unpack .../06-liborcania-dev_2.3.2-1_amd64.deb ...
#26 3.012 Unpacking liborcania-dev:amd64 (2.3.2-1) ...
#26 3.135 Selecting previously unselected package libsystemd-dev:amd64.
#26 3.152 Preparing to unpack .../07-libsystemd-dev_252.22-1~deb12u1_amd64.deb ...
#26 3.173 Unpacking libsystemd-dev:amd64 (252.22-1~deb12u1) ...
#26 3.331 Selecting previously unselected package libuhd4.3.0:amd64.
#26 3.349 Preparing to unpack .../08-libuhd4.3.0_4.3.0.0+ds1-5_amd64.deb ...
#26 3.366 Unpacking libuhd4.3.0:amd64 (4.3.0.0+ds1-5) ...
#26 3.648 Selecting previously unselected package libuhd-dev:amd64.
#26 3.665 Preparing to unpack .../09-libuhd-dev_4.3.0.0+ds1-5_amd64.deb ...
#26 3.683 Unpacking libuhd-dev:amd64 (4.3.0.0+ds1-5) ...
#26 3.833 Selecting previously unselected package libyder2.0:amd64.
#26 3.850 Preparing to unpack .../10-libyder2.0_1.4.19-1_amd64.deb ...
#26 3.871 Unpacking libyder2.0:amd64 (1.4.19-1) ...
#26 4.016 Selecting previously unselected package libulfius2.7:amd64.
#26 4.034 Preparing to unpack .../11-libulfius2.7_2.7.13-1_amd64.deb ...
#26 4.051 Unpacking libulfius2.7:amd64 (2.7.13-1) ...
#26 4.180 Selecting previously unselected package libyder-dev:amd64.
#26 4.197 Preparing to unpack .../12-libyder-dev_1.4.19-1_amd64.deb ...
#26 4.215 Unpacking libyder-dev:amd64 (1.4.19-1) ...
#26 4.345 Selecting previously unselected package libulfius-dev:amd64.
#26 4.363 Preparing to unpack .../13-libulfius-dev_2.7.13-1_amd64.deb ...
#26 4.383 Unpacking libulfius-dev:amd64 (2.7.13-1) ...
#26 4.571 Setting up libuhd4.3.0:amd64 (4.3.0.0+ds1-5) ...
#26 4.630 Setting up libcurl4-gnutls-dev:amd64 (7.88.1-10+deb12u5) ...
#26 4.683 Setting up libmicrohttpd12:amd64 (0.9.75-6) ...
#26 4.741 Setting up liborcania2.3:amd64 (2.3.2-1) ...
#26 4.795 Setting up liblimesuite23.11-1:amd64 (23.11.0.4.9dce.202404242026) ...
#26 4.848 Setting up libyder2.0:amd64 (1.4.19-1) ...
#26 4.907 Setting up libmicrohttpd-dev:amd64 (0.9.75-6) ...
#26 4.960 Setting up libuhd-dev:amd64 (4.3.0.0+ds1-5) ...
#26 5.012 Setting up libsystemd-dev:amd64 (252.22-1~deb12u1) ...
#26 5.073 Setting up liblimesuite-dev (23.11.0.4.9dce.202404242026) ...
#26 5.125 Setting up liborcania-dev:amd64 (2.3.2-1) ...
#26 5.187 Setting up libulfius2.7:amd64 (2.7.13-1) ...
#26 5.240 Setting up libyder-dev:amd64 (1.4.19-1) ...
#26 5.299 Setting up libulfius-dev:amd64 (2.7.13-1) ...
#26 5.353 Processing triggers for man-db (2.11.2-2) ...
#26 5.409 Processing triggers for libc-bin (2.36-9+deb12u6) ...
#26 5.545 + apt-get clean
#26 DONE 5.8s
#27 exporting to image
#27 exporting layers
#27 exporting layers 0.6s done
#27 writing image sha256:dbb8bd3142829f2e77ea9a418ab48eacd08a893c1791fea1c1d02da7007a33a6 done
#27 naming to docker.io/osmocom-build/debian-bookworm-build:latest 0.0s done
#27 DONE 0.6s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/debian-bookworm-build'
+ docker_image_exists debian-bookworm-build
+ docker images -q osmocom-build/debian-bookworm-build
+ test -n dbb8bd314282
+ list_osmo_packages debian-bookworm debian-bookworm-build
+ local distro=debian-bookworm
+ local image=debian-bookworm-build
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c
+ [ -n ]
+ return
+ docker_distro_from_image_name osmo-stp-master
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z ]
+ docker_upstream_distro_from_image_name osmo-stp-master
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name osmo-stp-master
+ echo osmo-stp-master
+ dir=osmo-stp-master
+ pull_arg=--pull
+ grep ^FROM ../osmo-stp-master/Dockerfile
+ from_line=FROM $USER/$DISTRO-build
+ echo FROM $USER/$DISTRO-build
+ grep -q $USER
+ pull_arg=
+ set +x
Building image: osmo-stp-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ docker_osmo_ttcn3_branch
+ [ -n ]
+ echo master
+ make -C ../osmo-stp-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-stp-master OSMO_TTCN3_BRANCH=master
make: Entering directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/osmo-stp-master'
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r /home/osmocom-build/jenkins/workspace/nplab-m3ua-test/common .common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bookworm \
--build-arg DISTRO=debian-bookworm \
--build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg ASTERISK_BRANCH=sysmocom/master \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_DIA2GSUP_BRANCH=master \
--build-arg OSMO_EPDG_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
-t osmocom-build/osmo-stp-master:latest .
#0 building with "default" instance using docker driver
#1 [internal] load build definition from Dockerfile
#1 transferring dockerfile: 1.23kB done
#1 DONE 0.0s
#2 [internal] load .dockerignore
#2 transferring context: 2B done
#2 DONE 0.1s
#3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest
#3 DONE 0.0s
#4 [internal] load build context
#4 transferring context: 1.13kB done
#4 DONE 0.1s
#5 https://gerrit.osmocom.org/plugins/gitiles/libosmo-sccp/+/master?format=TEXT
#5 DONE 0.2s
#6 [1/7] FROM docker.io/osmocom-build/debian-bookworm-build
#6 ...
#5 https://gerrit.osmocom.org/plugins/gitiles/libosmo-sccp/+/master?format=TEXT
#5 CACHED
#6 [1/7] FROM docker.io/osmocom-build/debian-bookworm-build
#6 DONE 0.8s
#7 [2/7] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends libosmocore-dev libosmo-netif-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libosmo-netif)" "pkgconfig(libosmocore)" "pkgconfig(libosmogsm)" "pkgconfig(libosmovty)" ;; esac
#7 0.370 Hit:1 http://deb.debian.org/debian bookworm InRelease
#7 0.370 Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
#7 0.370 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
#7 0.370 Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease
#7 0.867 Reading package lists...
#7 1.138 Reading package lists...
#7 1.389 Building dependency tree...
#7 1.443 Reading state information...
#7 1.506 The following additional packages will be installed:
#7 1.506 libosmocodec4 libosmocoding0 libosmocore libosmocore21 libosmoctrl0
#7 1.506 libosmogb14 libosmogsm20 libosmoisdn0 libosmonetif11 libosmosim2 libosmousb0
#7 1.507 libosmovty13 osmocom-nightly
#7 1.517 The following NEW packages will be installed:
#7 1.517 libosmo-netif-dev libosmocodec4 libosmocoding0 libosmocore libosmocore-dev
#7 1.517 libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0
#7 1.517 libosmonetif11 libosmosim2 libosmousb0 libosmovty13 osmocom-nightly
#7 1.538 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded.
#7 1.538 Need to get 1987 kB of archives.
#7 1.538 After this operation, 7202 kB of additional disk space will be used.
#7 1.538 Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ osmocom-nightly 202404242026 [1164 B]
#7 1.567 Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore21 1.9.0.196.9975.202404242026 [164 kB]
#7 1.571 Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocodec4 1.9.0.196.9975.202404242026 [46.0 kB]
#7 1.572 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmoisdn0 1.9.0.196.9975.202404242026 [65.4 kB]
#7 1.573 Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmogsm20 1.9.0.196.9975.202404242026 [222 kB]
#7 1.576 Get:6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocoding0 1.9.0.196.9975.202404242026 [66.0 kB]
#7 1.577 Get:7 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmovty13 1.9.0.196.9975.202404242026 [98.1 kB]
#7 1.578 Get:8 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmogb14 1.9.0.196.9975.202404242026 [173 kB]
#7 1.580 Get:9 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmoctrl0 1.9.0.196.9975.202404242026 [54.5 kB]
#7 1.582 Get:10 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmosim2 1.9.0.196.9975.202404242026 [58.5 kB]
#7 1.583 Get:11 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmousb0 1.9.0.196.9975.202404242026 [45.3 kB]
#7 1.585 Get:12 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore 1.9.0.196.9975.202404242026 [38.6 kB]
#7 1.586 Get:13 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore-dev 1.9.0.196.9975.202404242026 [838 kB]
#7 1.595 Get:14 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmonetif11 1.4.0.54.05ff.202404242026 [52.5 kB]
#7 1.595 Get:15 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmo-netif-dev 1.4.0.54.05ff.202404242026 [64.6 kB]
#7 1.704 debconf: delaying package configuration, since apt-utils is not installed
#7 1.748 Fetched 1987 kB in 0s (26.2 MB/s)
#7 1.820 Selecting previously unselected package osmocom-nightly.
#7 1.820 (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 116671 files and directories currently installed.)
#7 1.858 Preparing to unpack .../00-osmocom-nightly_202404242026_amd64.deb ...
#7 1.875 Unpacking osmocom-nightly (202404242026) ...
#7 2.008 Selecting previously unselected package libosmocore21:amd64.
#7 2.016 Preparing to unpack .../01-libosmocore21_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.059 Unpacking libosmocore21:amd64 (1.9.0.196.9975.202404242026) ...
#7 2.205 Selecting previously unselected package libosmocodec4:amd64.
#7 2.223 Preparing to unpack .../02-libosmocodec4_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.242 Unpacking libosmocodec4:amd64 (1.9.0.196.9975.202404242026) ...
#7 2.383 Selecting previously unselected package libosmoisdn0:amd64.
#7 2.391 Preparing to unpack .../03-libosmoisdn0_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.408 Unpacking libosmoisdn0:amd64 (1.9.0.196.9975.202404242026) ...
#7 2.556 Selecting previously unselected package libosmogsm20:amd64.
#7 2.563 Preparing to unpack .../04-libosmogsm20_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.581 Unpacking libosmogsm20:amd64 (1.9.0.196.9975.202404242026) ...
#7 2.732 Selecting previously unselected package libosmocoding0:amd64.
#7 2.750 Preparing to unpack .../05-libosmocoding0_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.768 Unpacking libosmocoding0:amd64 (1.9.0.196.9975.202404242026) ...
#7 2.916 Selecting previously unselected package libosmovty13:amd64.
#7 2.923 Preparing to unpack .../06-libosmovty13_1.9.0.196.9975.202404242026_amd64.deb ...
#7 2.941 Unpacking libosmovty13:amd64 (1.9.0.196.9975.202404242026) ...
#7 3.085 Selecting previously unselected package libosmogb14:amd64.
#7 3.103 Preparing to unpack .../07-libosmogb14_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.120 Unpacking libosmogb14:amd64 (1.9.0.196.9975.202404242026) ...
#7 3.259 Selecting previously unselected package libosmoctrl0:amd64.
#7 3.267 Preparing to unpack .../08-libosmoctrl0_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.285 Unpacking libosmoctrl0:amd64 (1.9.0.196.9975.202404242026) ...
#7 3.431 Selecting previously unselected package libosmosim2:amd64.
#7 3.438 Preparing to unpack .../09-libosmosim2_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.455 Unpacking libosmosim2:amd64 (1.9.0.196.9975.202404242026) ...
#7 3.597 Selecting previously unselected package libosmousb0:amd64.
#7 3.615 Preparing to unpack .../10-libosmousb0_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.632 Unpacking libosmousb0:amd64 (1.9.0.196.9975.202404242026) ...
#7 3.756 Selecting previously unselected package libosmocore.
#7 3.774 Preparing to unpack .../11-libosmocore_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.791 Unpacking libosmocore (1.9.0.196.9975.202404242026) ...
#7 3.918 Selecting previously unselected package libosmocore-dev:amd64.
#7 3.935 Preparing to unpack .../12-libosmocore-dev_1.9.0.196.9975.202404242026_amd64.deb ...
#7 3.953 Unpacking libosmocore-dev:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.127 Selecting previously unselected package libosmonetif11:amd64.
#7 4.145 Preparing to unpack .../13-libosmonetif11_1.4.0.54.05ff.202404242026_amd64.deb ...
#7 4.162 Unpacking libosmonetif11:amd64 (1.4.0.54.05ff.202404242026) ...
#7 4.286 Selecting previously unselected package libosmo-netif-dev:amd64.
#7 4.304 Preparing to unpack .../14-libosmo-netif-dev_1.4.0.54.05ff.202404242026_amd64.deb ...
#7 4.321 Unpacking libosmo-netif-dev:amd64 (1.4.0.54.05ff.202404242026) ...
#7 4.489 Setting up osmocom-nightly (202404242026) ...
#7 4.542 Setting up libosmocore21:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.601 Setting up libosmousb0:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.655 Setting up libosmocodec4:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.709 Setting up libosmovty13:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.767 Setting up libosmoisdn0:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.820 Setting up libosmogsm20:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.879 Setting up libosmoctrl0:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.932 Setting up libosmogb14:amd64 (1.9.0.196.9975.202404242026) ...
#7 4.985 Setting up libosmonetif11:amd64 (1.4.0.54.05ff.202404242026) ...
#7 5.044 Setting up libosmocoding0:amd64 (1.9.0.196.9975.202404242026) ...
#7 5.098 Setting up libosmosim2:amd64 (1.9.0.196.9975.202404242026) ...
#7 5.154 Setting up libosmocore (1.9.0.196.9975.202404242026) ...
#7 5.211 Setting up libosmocore-dev:amd64 (1.9.0.196.9975.202404242026) ...
#7 5.264 Setting up libosmo-netif-dev:amd64 (1.4.0.54.05ff.202404242026) ...
#7 5.324 Processing triggers for libc-bin (2.36-9+deb12u6) ...
#7 DONE 5.6s
#8 [3/7] WORKDIR /DATA
#8 DONE 0.2s
#9 [4/7] RUN GIT clone https://gerrit.osmocom.org/libosmo-sccp.git
#9 0.313 Cloning into 'libosmo-sccp'...
#9 DONE 0.6s
#10 [5/7] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/LIBOSMO-SCCP/+/MASTER?FORMAT=TEXT /tmp/commit-libosmo-sccp
#10 DONE 0.1s
#11 [6/7] RUN CD libosmo-sccp && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install && install examples/.libs/sccp_demo_user /usr/local/bin/ && ldconfig
#11 0.382 Already on 'master'
#11 0.383 Your branch is up to date with 'origin/master'.
#11 0.384 refs/heads/master
#11 0.389 HEAD is now at da7bc78 ss7_asp: Update osmo_stream read_cb2 functions to accommodate for new API param
#11 0.391 master
#11 0.393 da7bc78cb48c5ba0604b8d26000e059ebdcab391
#11 2.758 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
#11 2.758 libtoolize: copying file './ltmain.sh'
#11 3.202 libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
#11 3.202 libtoolize: and rerunning libtoolize and aclocal.
#11 3.202 libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
#11 3.948 configure.ac:167: warning: The macro `AC_HELP_STRING' is obsolete.
#11 3.948 configure.ac:167: You should run autoupdate.
#11 3.948 ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
#11 3.948 configure.ac:167: the top level
#11 3.948 configure.ac:184: warning: AC_OUTPUT should be used without arguments.
#11 3.948 configure.ac:184: You should run autoupdate.
#11 4.373 configure.ac:23: installing './compile'
#11 4.375 configure.ac:25: installing './config.guess'
#11 4.376 configure.ac:25: installing './config.sub'
#11 4.378 configure.ac:9: installing './install-sh'
#11 4.380 configure.ac:9: installing './missing'
#11 4.441 examples/Makefile.am: installing './depcomp'
#11 4.654 checking for a BSD-compatible install... /usr/bin/install -c
#11 4.675 checking whether build environment is sane... yes
#11 4.699 checking for a race-free mkdir -p... /usr/bin/mkdir -p
#11 4.704 checking for gawk... gawk
#11 4.704 checking whether make sets $(MAKE)... yes
#11 4.729 checking whether make supports nested variables... yes
#11 4.747 checking whether make supports nested variables... (cached) yes
#11 4.747 checking whether make sets $(MAKE)... (cached) yes
#11 4.752 checking for gcc... gcc
#11 4.820 checking whether the C compiler works... yes
#11 4.901 checking for C compiler default output file name... a.out
#11 4.902 checking for suffix of executables...
#11 4.940 checking whether we are cross compiling... no
#11 4.969 checking for suffix of object files... o
#11 4.981 checking whether the compiler supports GNU C... yes
#11 4.997 checking whether gcc accepts -g... yes
#11 5.013 checking for gcc option to enable C11 features... none needed
#11 5.040 checking whether gcc understands -c and -o together... yes
#11 5.064 checking whether make supports the include directive... yes (GNU style)
#11 5.077 checking dependency style of gcc... gcc3
#11 5.160 checking build system type... x86_64-pc-linux-gnu
#11 5.260 checking host system type... x86_64-pc-linux-gnu
#11 5.261 checking how to print strings... printf
#11 5.289 checking for a sed that does not truncate output... /usr/bin/sed
#11 5.292 checking for grep that handles long lines and -e... /usr/bin/grep
#11 5.293 checking for egrep... /usr/bin/grep -E
#11 5.293 checking for fgrep... /usr/bin/grep -F
#11 5.294 checking for ld used by gcc... /usr/bin/ld
#11 5.297 checking if the linker (/usr/bin/ld) is GNU ld... yes
#11 5.298 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
#11 5.300 checking the name lister (/usr/bin/nm -B) interface... BSD nm
#11 5.334 checking whether ln -s works... yes
#11 5.335 checking the maximum length of command line arguments... 1572864
#11 5.351 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
#11 5.351 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
#11 5.351 checking for /usr/bin/ld option to reload object files... -r
#11 5.352 checking for file... file
#11 5.353 checking for objdump... objdump
#11 5.354 checking how to recognize dependent libraries... pass_all
#11 5.355 checking for dlltool... no
#11 5.355 checking how to associate runtime and link libraries... printf %s\n
#11 5.356 checking for ar... ar
#11 5.357 checking for archiver @FILE support... @
#11 5.401 checking for strip... strip
#11 5.401 checking for ranlib... ranlib
#11 5.402 checking command to parse /usr/bin/nm -B output from gcc object... ok
#11 5.475 checking for sysroot... no
#11 5.475 checking for a working dd... /usr/bin/dd
#11 5.478 checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
#11 5.517 checking for mt... no
#11 5.517 checking if : is a manifest tool... no
#11 5.529 checking for stdio.h... yes
#11 5.559 checking for stdlib.h... yes
#11 5.584 checking for string.h... yes
#11 5.598 checking for inttypes.h... yes
#11 5.611 checking for stdint.h... yes
#11 5.627 checking for strings.h... yes
#11 5.641 checking for sys/stat.h... yes
#11 5.666 checking for sys/types.h... yes
#11 5.689 checking for unistd.h... yes
#11 5.711 checking for dlfcn.h... yes
#11 5.734 checking for objdir... .libs
#11 5.797 checking if gcc supports -fno-rtti -fno-exceptions... no
#11 5.811 checking for gcc option to produce PIC... -fPIC -DPIC
#11 5.811 checking if gcc PIC flag -fPIC -DPIC works... yes
#11 5.847 checking if gcc static flag -static works... yes
#11 5.909 checking if gcc supports -c -o file.o... yes
#11 5.921 checking if gcc supports -c -o file.o... (cached) yes
#11 5.921 checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
#11 5.926 checking whether -lc should be explicitly linked in... no
#11 5.943 checking dynamic linker characteristics... GNU/Linux ld.so
#11 6.017 checking how to hardcode library paths into programs... immediate
#11 6.017 checking whether stripping libraries is possible... yes
#11 6.018 checking if libtool supports shared libraries... yes
#11 6.018 checking whether to build shared libraries... yes
#11 6.019 checking whether to build static libraries... yes
#11 6.019 checking for pkg-config... /usr/bin/pkg-config
#11 6.019 checking for pkg-config... /usr/bin/pkg-config
#11 6.020 checking pkg-config is at least version 0.20... yes
#11 6.020 checking for libosmocore >= 1.9.0... yes
#11 6.030 checking for libosmovty >= 1.9.0... yes
#11 6.045 checking for libosmogsm >= 1.9.0... yes
#11 6.061 checking for libosmo-netif >= 1.4.0... yes
#11 6.077 checking for library containing sctp_recvmsg... -lsctp
#11 6.164 checking if gcc supports -fvisibility=hidden... yes
#11 6.173 checking for doxygen... /usr/bin/doxygen
#11 6.176 checking whether to enable VTY/CTRL tests... no
#11 6.176 CFLAGS=" -std=gnu11 -Wall"
#11 6.176 CPPFLAGS=" -Wall"
#11 6.208 checking that generated files are newer than configure... done
#11 6.209 configure: creating ./config.status
#11 7.302 config.status: creating libosmo-sigtran.pc
#11 7.331 config.status: creating libosmo-sccp.pc
#11 7.360 config.status: creating libosmo-mtp.pc
#11 7.389 config.status: creating libosmo-xua.pc
#11 7.419 config.status: creating include/osmocom/Makefile
#11 7.440 config.status: creating include/osmocom/sccp/Makefile
#11 7.463 config.status: creating include/osmocom/mtp/Makefile
#11 7.490 config.status: creating include/osmocom/sigtran/Makefile
#11 7.511 config.status: creating include/Makefile
#11 7.526 config.status: creating src/Makefile
#11 7.554 config.status: creating tests/Makefile
#11 7.590 config.status: creating tests/sccp/Makefile
#11 7.631 config.status: creating tests/mtp/Makefile
#11 7.671 config.status: creating tests/m2ua/Makefile
#11 7.711 config.status: creating tests/xua/Makefile
#11 7.750 config.status: creating tests/ss7/Makefile
#11 7.790 config.status: creating tests/vty/Makefile
#11 7.830 config.status: creating examples/Makefile
#11 7.870 config.status: creating stp/Makefile
#11 7.910 config.status: creating doc/Makefile
#11 7.950 config.status: creating doc/examples/Makefile
#11 7.990 config.status: creating doc/manuals/Makefile
#11 8.030 config.status: creating contrib/Makefile
#11 8.068 config.status: creating contrib/systemd/Makefile
#11 8.108 config.status: creating contrib/libosmo-sccp.spec
#11 8.149 config.status: creating Doxyfile
#11 8.188 config.status: creating Makefile
#11 8.227 config.status: executing tests/atconfig commands
#11 8.234 config.status: executing depfiles commands
#11 8.982 config.status: executing libtool commands
#11 9.094 echo 1.8.0.62-da7b > .version-t && mv .version-t .version
#11 9.100 make install-recursive
#11 9.107 make[1]: Entering directory '/data/libosmo-sccp'
#11 9.116 Making install in include
#11 9.120 make[2]: Entering directory '/data/libosmo-sccp/include'
#11 9.129 Making install in osmocom
#11 9.133 make[3]: Entering directory '/data/libosmo-sccp/include/osmocom'
#11 9.142 Making install in mtp
#11 9.146 make[4]: Entering directory '/data/libosmo-sccp/include/osmocom/mtp'
#11 9.152 make[5]: Entering directory '/data/libosmo-sccp/include/osmocom/mtp'
#11 9.152 make[5]: Nothing to be done for 'install-exec-am'.
#11 9.155 /usr/bin/mkdir -p '/usr/local/include/osmocom/mtp'
#11 9.162 /usr/bin/install -c -m 644 mtp_level3.h mtp_pcap.h '/usr/local/include/osmocom/mtp'
#11 9.166 make[5]: Leaving directory '/data/libosmo-sccp/include/osmocom/mtp'
#11 9.166 make[4]: Leaving directory '/data/libosmo-sccp/include/osmocom/mtp'
#11 9.167 Making install in sccp
#11 9.171 make[4]: Entering directory '/data/libosmo-sccp/include/osmocom/sccp'
#11 9.177 make[5]: Entering directory '/data/libosmo-sccp/include/osmocom/sccp'
#11 9.177 make[5]: Nothing to be done for 'install-exec-am'.
#11 9.180 /usr/bin/mkdir -p '/usr/local/include/osmocom/sccp'
#11 9.186 /usr/bin/install -c -m 644 sccp_types.h sccp.h '/usr/local/include/osmocom/sccp'
#11 9.190 make[5]: Leaving directory '/data/libosmo-sccp/include/osmocom/sccp'
#11 9.191 make[4]: Leaving directory '/data/libosmo-sccp/include/osmocom/sccp'
#11 9.191 Making install in sigtran
#11 9.196 make[4]: Entering directory '/data/libosmo-sccp/include/osmocom/sigtran'
#11 9.202 make[5]: Entering directory '/data/libosmo-sccp/include/osmocom/sigtran'
#11 9.202 make[5]: Nothing to be done for 'install-exec-am'.
#11 9.205 /usr/bin/mkdir -p '/usr/local/include/osmocom/sigtran'
#11 9.206 /usr/bin/mkdir -p '/usr/local/include/osmocom/sigtran/protocol'
#11 9.211 /usr/bin/install -c -m 644 xua_types.h xua_msg.h m2ua_types.h sccp_sap.h sigtran_sap.h sccp_helpers.h mtp_sap.h osmo_ss7.h '/usr/local/include/osmocom/sigtran'
#11 9.212 /usr/bin/install -c -m 644 protocol/sua.h protocol/m3ua.h protocol/mtp.h protocol/sccp_scmg.h '/usr/local/include/osmocom/sigtran/protocol'
#11 9.217 make[5]: Leaving directory '/data/libosmo-sccp/include/osmocom/sigtran'
#11 9.217 make[4]: Leaving directory '/data/libosmo-sccp/include/osmocom/sigtran'
#11 9.221 make[4]: Entering directory '/data/libosmo-sccp/include/osmocom'
#11 9.227 make[5]: Entering directory '/data/libosmo-sccp/include/osmocom'
#11 9.227 make[5]: Nothing to be done for 'install-exec-am'.
#11 9.227 make[5]: Nothing to be done for 'install-data-am'.
#11 9.227 make[5]: Leaving directory '/data/libosmo-sccp/include/osmocom'
#11 9.228 make[4]: Leaving directory '/data/libosmo-sccp/include/osmocom'
#11 9.229 make[3]: Leaving directory '/data/libosmo-sccp/include/osmocom'
#11 9.233 make[3]: Entering directory '/data/libosmo-sccp/include'
#11 9.239 make[4]: Entering directory '/data/libosmo-sccp/include'
#11 9.239 make[4]: Nothing to be done for 'install-exec-am'.
#11 9.239 make[4]: Nothing to be done for 'install-data-am'.
#11 9.239 make[4]: Leaving directory '/data/libosmo-sccp/include'
#11 9.239 make[3]: Leaving directory '/data/libosmo-sccp/include'
#11 9.240 make[2]: Leaving directory '/data/libosmo-sccp/include'
#11 9.240 Making install in src
#11 9.247 make[2]: Entering directory '/data/libosmo-sccp/src'
#11 9.249 CC sccp.o
#11 9.250 CC mtp_pcap.o
#11 9.251 CC libxua_a-xua_msg.o
#11 9.252 CC ipa.lo
#11 9.253 CC m3ua.lo
#11 9.254 CC osmo_ss7.lo
#11 9.254 CC osmo_ss7_as.lo
#11 9.256 CC osmo_ss7_asp.lo
#11 9.257 CC osmo_ss7_asp_peer.lo
#11 9.258 CC osmo_ss7_hmrt.lo
#11 9.259 CC osmo_ss7_vty.lo
#11 9.260 CC osmo_ss7_xua_srv.lo
#11 9.265 CC sccp2sua.lo
#11 9.266 CC sccp_helpers.lo
#11 9.267 CC sccp_lbcs.lo
#11 9.268 CC sccp_sap.lo
#11 9.270 CC sccp_sclc.lo
#11 9.270 CC sccp_scmg.lo
#11 9.271 CC sccp_scrc.lo
#11 9.272 CC sccp_scoc.lo
#11 9.331 CC sccp_types.lo
#11 9.379 sccp_scoc.c: In function 'scoc_fsm_active':
#11 9.379 sccp_scoc.c:1200:9: note: '#pragma message: TODO: internal disco: send N-DISCONNECT.ind to user'
#11 9.379 1200 | #pragma message ("TODO: internal disco: send N-DISCONNECT.ind to user")
#11 9.379 | ^~~~~~~
#11 9.410 CC sccp_user.lo
#11 9.416 CC sccp_vty.lo
#11 9.416 CC sua.lo
#11 9.429 CC xua_asp_fsm.lo
#11 9.442 CC xua_as_fsm.lo
#11 9.453 CC xua_default_lm_fsm.lo
#11 9.453 CC xua_msg.lo
#11 9.455 CC xua_rkm.lo
#11 9.462 CC xua_shared.lo
#11 9.469 CC xua_snm.lo
#11 9.472 AR libsccp.a
#11 9.472 ar: `u' modifier ignored since `D' is the default (see `U')
#11 9.478 AR libmtp.a
#11 9.478 ar: `u' modifier ignored since `D' is the default (see `U')
#11 9.483 AR libxua.a
#11 9.484 ar: `u' modifier ignored since `D' is the default (see `U')
#11 9.696 CCLD libosmo-sigtran.la
#11 9.965 make[3]: Entering directory '/data/libosmo-sccp/src'
#11 9.966 /usr/bin/mkdir -p '/usr/local/lib'
#11 9.966 /usr/bin/mkdir -p '/usr/local/lib'
#11 9.966 /bin/bash ../libtool --mode=install /usr/bin/install -c libosmo-sigtran.la '/usr/local/lib'
#11 9.967 /usr/bin/install -c -m 644 libsccp.a libmtp.a libxua.a '/usr/local/lib'
#11 9.969 ( cd '/usr/local/lib' && ranlib libsccp.a )
#11 9.971 ( cd '/usr/local/lib' && ranlib libmtp.a )
#11 9.973 ( cd '/usr/local/lib' && ranlib libxua.a )
#11 9.979 libtool: install: /usr/bin/install -c .libs/libosmo-sigtran.so.9.0.0 /usr/local/lib/libosmo-sigtran.so.9.0.0
#11 9.982 libtool: install: (cd /usr/local/lib && { ln -s -f libosmo-sigtran.so.9.0.0 libosmo-sigtran.so.9 || { rm -f libosmo-sigtran.so.9 && ln -s libosmo-sigtran.so.9.0.0 libosmo-sigtran.so.9; }; })
#11 9.985 libtool: install: (cd /usr/local/lib && { ln -s -f libosmo-sigtran.so.9.0.0 libosmo-sigtran.so || { rm -f libosmo-sigtran.so && ln -s libosmo-sigtran.so.9.0.0 libosmo-sigtran.so; }; })
#11 9.988 libtool: install: /usr/bin/install -c .libs/libosmo-sigtran.lai /usr/local/lib/libosmo-sigtran.la
#11 9.992 libtool: install: /usr/bin/install -c .libs/libosmo-sigtran.a /usr/local/lib/libosmo-sigtran.a
#11 9.999 libtool: install: chmod 644 /usr/local/lib/libosmo-sigtran.a
#11 10.01 libtool: install: ranlib /usr/local/lib/libosmo-sigtran.a
#11 10.06 libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
#11 10.06 ----------------------------------------------------------------------
#11 10.06 Libraries have been installed in:
#11 10.06 /usr/local/lib
#11 10.06
#11 10.06 If you ever happen to want to link against installed libraries
#11 10.06 in a given directory, LIBDIR, you must either use libtool, and
#11 10.06 specify the full pathname of the library, or use the '-LLIBDIR'
#11 10.06 flag during linking and do at least one of the following:
#11 10.06 - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
#11 10.06 during execution
#11 10.06 - add LIBDIR to the 'LD_RUN_PATH' environment variable
#11 10.06 during linking
#11 10.06 - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
#11 10.06 - have your system administrator add LIBDIR to '/etc/ld.so.conf'
#11 10.06
#11 10.06 See any operating system documentation about shared libraries for
#11 10.06 more information, such as the ld(1) and ld.so(8) manual pages.
#11 10.06 ----------------------------------------------------------------------
#11 10.06 make[3]: Leaving directory '/data/libosmo-sccp/src'
#11 10.06 make[2]: Leaving directory '/data/libosmo-sccp/src'
#11 10.06 Making install in tests
#11 10.06 make[2]: Entering directory '/data/libosmo-sccp/tests'
#11 10.07 Making install in xua
#11 10.08 make[3]: Entering directory '/data/libosmo-sccp/tests/xua'
#11 10.08 make[4]: Entering directory '/data/libosmo-sccp/tests/xua'
#11 10.08 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.08 make[4]: Nothing to be done for 'install-data-am'.
#11 10.08 make[4]: Leaving directory '/data/libosmo-sccp/tests/xua'
#11 10.08 make[3]: Leaving directory '/data/libosmo-sccp/tests/xua'
#11 10.09 Making install in sccp
#11 10.09 make[3]: Entering directory '/data/libosmo-sccp/tests/sccp'
#11 10.10 make[4]: Entering directory '/data/libosmo-sccp/tests/sccp'
#11 10.10 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.10 make[4]: Nothing to be done for 'install-data-am'.
#11 10.10 make[4]: Leaving directory '/data/libosmo-sccp/tests/sccp'
#11 10.10 make[3]: Leaving directory '/data/libosmo-sccp/tests/sccp'
#11 10.10 Making install in mtp
#11 10.10 make[3]: Entering directory '/data/libosmo-sccp/tests/mtp'
#11 10.11 make[4]: Entering directory '/data/libosmo-sccp/tests/mtp'
#11 10.11 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.11 make[4]: Nothing to be done for 'install-data-am'.
#11 10.11 make[4]: Leaving directory '/data/libosmo-sccp/tests/mtp'
#11 10.11 make[3]: Leaving directory '/data/libosmo-sccp/tests/mtp'
#11 10.11 Making install in m2ua
#11 10.11 make[3]: Entering directory '/data/libosmo-sccp/tests/m2ua'
#11 10.12 make[4]: Entering directory '/data/libosmo-sccp/tests/m2ua'
#11 10.12 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.12 make[4]: Nothing to be done for 'install-data-am'.
#11 10.12 make[4]: Leaving directory '/data/libosmo-sccp/tests/m2ua'
#11 10.12 make[3]: Leaving directory '/data/libosmo-sccp/tests/m2ua'
#11 10.12 Making install in ss7
#11 10.12 make[3]: Entering directory '/data/libosmo-sccp/tests/ss7'
#11 10.13 make[4]: Entering directory '/data/libosmo-sccp/tests/ss7'
#11 10.13 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.13 make[4]: Nothing to be done for 'install-data-am'.
#11 10.13 make[4]: Leaving directory '/data/libosmo-sccp/tests/ss7'
#11 10.13 make[3]: Leaving directory '/data/libosmo-sccp/tests/ss7'
#11 10.13 Making install in vty
#11 10.13 make[3]: Entering directory '/data/libosmo-sccp/tests/vty'
#11 10.14 make[4]: Entering directory '/data/libosmo-sccp/tests/vty'
#11 10.14 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.14 make[4]: Nothing to be done for 'install-data-am'.
#11 10.14 make[4]: Leaving directory '/data/libosmo-sccp/tests/vty'
#11 10.14 make[3]: Leaving directory '/data/libosmo-sccp/tests/vty'
#11 10.15 make[3]: Entering directory '/data/libosmo-sccp/tests'
#11 10.15 make[4]: Entering directory '/data/libosmo-sccp/tests'
#11 10.15 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.15 make[4]: Nothing to be done for 'install-data-am'.
#11 10.15 make[4]: Leaving directory '/data/libosmo-sccp/tests'
#11 10.15 make[3]: Leaving directory '/data/libosmo-sccp/tests'
#11 10.15 make[2]: Leaving directory '/data/libosmo-sccp/tests'
#11 10.15 Making install in examples
#11 10.16 make[2]: Entering directory '/data/libosmo-sccp/examples'
#11 10.16 CC sccp_demo_user.o
#11 10.16 CC sccp_test_server.o
#11 10.16 CC sccp_test_vty.o
#11 10.20 CCLD sccp_demo_user
#11 10.34 make[3]: Entering directory '/data/libosmo-sccp/examples'
#11 10.34 make[3]: Nothing to be done for 'install-exec-am'.
#11 10.34 make[3]: Nothing to be done for 'install-data-am'.
#11 10.34 make[3]: Leaving directory '/data/libosmo-sccp/examples'
#11 10.34 make[2]: Leaving directory '/data/libosmo-sccp/examples'
#11 10.34 Making install in stp
#11 10.34 make[2]: Entering directory '/data/libosmo-sccp/stp'
#11 10.34 CC stp_main.o
#11 10.38 CCLD osmo-stp
#11 10.53 make[3]: Entering directory '/data/libosmo-sccp/stp'
#11 10.53 make[3]: Nothing to be done for 'install-data-am'.
#11 10.53 /usr/bin/mkdir -p '/usr/local/bin'
#11 10.53 /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-stp '/usr/local/bin'
#11 10.56 libtool: install: /usr/bin/install -c .libs/osmo-stp /usr/local/bin/osmo-stp
#11 10.57 make[3]: Leaving directory '/data/libosmo-sccp/stp'
#11 10.57 make[2]: Leaving directory '/data/libosmo-sccp/stp'
#11 10.57 Making install in doc
#11 10.57 make[2]: Entering directory '/data/libosmo-sccp/doc'
#11 10.58 Making install in examples
#11 10.58 make[3]: Entering directory '/data/libosmo-sccp/doc/examples'
#11 10.59 make[4]: Entering directory '/data/libosmo-sccp/doc/examples'
#11 10.59 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.59 /usr/bin/mkdir -p '/usr/local/share/doc/libosmo-sccp/examples/osmo-stp'
#11 10.59 /usr/bin/mkdir -p '/usr/local/etc/osmocom'
#11 10.60 /usr/bin/install -c -m 644 osmo-stp.cfg osmo-stp-multihome.cfg '/usr/local/share/doc/libosmo-sccp/examples/osmo-stp'
#11 10.60 /usr/bin/install -c -m 644 osmo-stp.cfg '/usr/local/etc/osmocom'
#11 10.60 make[4]: Leaving directory '/data/libosmo-sccp/doc/examples'
#11 10.60 make[3]: Leaving directory '/data/libosmo-sccp/doc/examples'
#11 10.60 Making install in manuals
#11 10.61 make[3]: Entering directory '/data/libosmo-sccp/doc/manuals'
#11 10.61 make[4]: Entering directory '/data/libosmo-sccp/doc/manuals'
#11 10.61 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.61 make[4]: Nothing to be done for 'install-data-am'.
#11 10.61 make[4]: Leaving directory '/data/libosmo-sccp/doc/manuals'
#11 10.61 make[3]: Leaving directory '/data/libosmo-sccp/doc/manuals'
#11 10.62 make[3]: Entering directory '/data/libosmo-sccp/doc'
#11 10.62 make[4]: Entering directory '/data/libosmo-sccp/doc'
#11 10.62 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.62 make[4]: Nothing to be done for 'install-data-am'.
#11 10.62 make[4]: Leaving directory '/data/libosmo-sccp/doc'
#11 10.62 make[3]: Leaving directory '/data/libosmo-sccp/doc'
#11 10.63 make[2]: Leaving directory '/data/libosmo-sccp/doc'
#11 10.63 Making install in contrib
#11 10.63 make[2]: Entering directory '/data/libosmo-sccp/contrib'
#11 10.64 Making install in systemd
#11 10.64 make[3]: Entering directory '/data/libosmo-sccp/contrib/systemd'
#11 10.65 make[4]: Entering directory '/data/libosmo-sccp/contrib/systemd'
#11 10.65 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.65 /usr/bin/mkdir -p '/lib/systemd/system'
#11 10.66 /usr/bin/install -c -m 644 osmo-stp.service '/lib/systemd/system'
#11 10.66 make[4]: Leaving directory '/data/libosmo-sccp/contrib/systemd'
#11 10.66 make[3]: Leaving directory '/data/libosmo-sccp/contrib/systemd'
#11 10.67 make[3]: Entering directory '/data/libosmo-sccp/contrib'
#11 10.67 make[4]: Entering directory '/data/libosmo-sccp/contrib'
#11 10.67 make[4]: Nothing to be done for 'install-exec-am'.
#11 10.67 make[4]: Nothing to be done for 'install-data-am'.
#11 10.67 make[4]: Leaving directory '/data/libosmo-sccp/contrib'
#11 10.67 make[3]: Leaving directory '/data/libosmo-sccp/contrib'
#11 10.67 make[2]: Leaving directory '/data/libosmo-sccp/contrib'
#11 10.68 make[2]: Entering directory '/data/libosmo-sccp'
#11 10.68 mkdir -p doc/sigtran
#11 10.69 /usr/bin/doxygen Doxyfile
#11 10.73 warning: Tag 'SYMBOL_CACHE_SIZE' at line 310 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'SHOW_DIRECTORIES' at line 519 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'COLS_IN_ALPHA_INDEX' at line 799 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'HTML_ALIGN_MEMBERS' at line 900 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'USE_INLINE_TREES' at line 1087 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'LATEX_SOURCE_CODE' at line 1247 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'XML_SCHEMA' at line 1339 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'XML_DTD' at line 1345 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'PERL_PATH' at line 1510 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'CLASS_DIAGRAMS' at line 1522 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: Tag 'MSCGEN_PATH' at line 1531 of file 'Doxyfile' has become obsolete.
#11 10.73 To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
#11 10.73 warning: argument 'a4wide' for option PAPER_TYPE is not a valid enum value
#11 10.73 Using the default: a4!
#11 10.76 Doxygen version used: 1.9.4
#11 10.76 Searching for include files...
#11 10.76 Searching for example files...
#11 10.76 Searching for images...
#11 10.76 Searching for dot files...
#11 10.76 Searching for msc files...
#11 10.76 Searching for dia files...
#11 10.76 Searching for files to exclude
#11 10.76 Searching INPUT for files to process...
#11 10.76 Searching for files in directory /data/libosmo-sccp/include/osmocom/sigtran
#11 10.76 Searching for files in directory /data/libosmo-sccp/include/osmocom/sigtran/protocol
#11 10.76 Searching for files in directory /data/libosmo-sccp/src
#11 10.76 Reading and parsing tag files
#11 10.76 Parsing files
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/m2ua_types.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/m2ua_types.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/mtp_sap.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/mtp_sap.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/protocol/m3ua.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/protocol/m3ua.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/protocol/mtp.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/protocol/mtp.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/protocol/sccp_scmg.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/protocol/sccp_scmg.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/protocol/sua.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/protocol/sua.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/sccp_helpers.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/sccp_helpers.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/sccp_sap.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/sccp_sap.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/sigtran_sap.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/sigtran_sap.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/xua_msg.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/xua_msg.h...
#11 10.76 Preprocessing /data/libosmo-sccp/include/osmocom/sigtran/xua_types.h...
#11 10.76 Parsing file /data/libosmo-sccp/include/osmocom/sigtran/xua_types.h...
#11 10.76 Preprocessing /data/libosmo-sccp/src/ipa.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/ipa.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/m3ua.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/m3ua.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/mtp_pcap.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/mtp_pcap.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_as.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_as.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_asp.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_asp.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_asp_peer.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_asp_peer.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_hmrt.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_hmrt.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_vty.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_vty.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/osmo_ss7_xua_srv.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/osmo_ss7_xua_srv.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp2sua.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp2sua.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp_helpers.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp_helpers.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp_internal.h...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp_internal.h...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp_lbcs.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp_lbcs.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp_sap.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp_sap.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/sccp_sclc.c...
#11 10.76 Parsing file /data/libosmo-sccp/src/sccp_sclc.c...
#11 10.76 Preprocessing /data/libosmo-sccp/src/data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h:84: warning: unable to resolve reference to 'osmo_xua_servers' for \ref command
#11 10.83 /sccp_scmg.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_scmg.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sccp_scoc.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_scoc.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sccp_scrc.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_scrc.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sccp_types.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_types.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sccp_user.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_user.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sccp_vty.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sccp_vty.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/ss7_internal.h...
#11 10.83 Parsing file /data/libosmo-sccp/src/ss7_internal.h...
#11 10.83 Preprocessing /data/libosmo-sccp/src/sua.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/sua.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_as_fsm.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_as_fsm.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_as_fsm.h...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_as_fsm.h...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_asp_fsm.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_asp_fsm.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_asp_fsm.h...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_asp_fsm.h...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_default_lm_fsm.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_default_lm_fsm.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_internal.h...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_internal.h...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_msg.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_msg.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_rkm.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_rkm.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_shared.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_shared.c...
#11 10.83 Preprocessing /data/libosmo-sccp/src/xua_snm.c...
#11 10.83 Parsing file /data/libosmo-sccp/src/xua_snm.c...
#11 10.83 Building macro definition list...
#11 10.83 Building group list...
#11 10.83 Building directory list...
#11 10.83 Building namespace list...
#11 10.83 Building file list...
#11 10.83 Building class list...
#11 10.83 Building concept list...
#11 10.83 Computing nesting relations for classes...
#11 10.83 Associating documentation with classes...
#11 10.83 Associating documentation with concepts...
#11 10.83 Building example list...
#11 10.83 Searching for enumerations...
#11 10.83 Searching for documented typedefs...
#11 10.83 Searching for members imported via using declarations...
#11 10.83 Searching for included using directives...
#11 10.83 Searching for documented variables...
#11 10.83 Building interface member list...
#11 10.83 Building member list...
#11 10.83 Searching for friends...
#11 10.83 Searching for documented defines...
#11 10.83 Computing class inheritance relations...
#11 10.83 Computing class usage relations...
#11 10.83 Flushing cached template relations that have become invalid...
#11 10.83 Computing class relations...
#11 10.83 Add enum values to enums...
#11 10.83 Searching for member function documentation...
#11 10.83 Creating members for template instances...
#11 10.83 Building page list...
#11 10.83 Search for main page...
#11 10.83 Computing page relations...
#11 10.83 Determining the scope of groups...
#11 10.83 Sorting lists...
#11 10.83 Determining which enums are documented
#11 10.83 Computing member relations...
#11 10.83 Building full member lists recursively...
#11 10.83 Adding members to member groups.
#11 10.83 Computing member references...
#11 10.83 Inheriting documentation...
#11 10.83 Generating disk names...
#11 10.83 Adding source references...
#11 10.83 Adding xrefitems...
#11 10.83 Sorting member lists...
#11 10.83 Setting anonymous enum type...
#11 10.83 Computing dependencies between directories...
#11 10.83 Generating citations page...
#11 10.83 Counting members...
#11 10.83 Counting data structures...
#11 10.83 Resolving user defined references...
#11 10.83 Finding anchors and sections in the documentation...
#11 10.83 Transferring function references...
#11 10.83 Combining using relations...
#11 10.83 Adding members to index pages...
#11 10.83 Correcting members for VHDL...
#11 10.83 Computing tooltip texts...
#11 10.83 Generating style sheet...
#11 10.83 Generating search indices...
#11 10.83 Generating example documentation...
#11 10.83 Generating file sources...
#11 10.83 Generating code for file include/osmocom/sigtran/m2ua_types.h...
#11 10.83 Generating code for file include/osmocom/sigtran/mtp_sap.h...
#11 10.83 Generating code for file include/osmocom/sigtran/osmo_ss7.h...
#11 10.83 Generating code for file include/osmocom/sigtran/protocol/m3ua.h...
#11 10.83 Generating code for file include/osmocom/sigtran/protocol/mtp.h...
#11 10.83 Generating code for file include/osmocom/sigt/data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h:514: warning: argument 'ppid_sid' of command @param is not found in the argument list of osmo_ss7_asp_rx_unknown_cb(struct osmo_ss7_asp *asp, int ppid_mux, struct msgb *msg)
#11 10.91 /data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h:514: warning: The following parameter of osmo_ss7_asp_rx_unknown_cb(struct osmo_ss7_asp *asp, int ppid_mux, struct msgb *msg) is not documented:
#11 10.91 parameter 'ppid_mux'
#11 10.91 /data/libosmo-sccp/src/sccp_user.c:881: warning: argument 'sccp' of command @param is not found in the argument list of osmo_sccp_set_max_optional_data(struct osmo_sccp_instance *inst, int val)
#11 10.91 /data/libosmo-sccp/src/sccp_user.c:881: warning: The following parameter of osmo_sccp_set_max_optional_data(struct osmo_sccp_instance *inst, int val) is not documented:
#11 10.91 parameter 'inst'
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: unable to resolve reference to 'asp' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: argument 'asp' of command @param is not found in the argument list of osmo_ss7_as_add_asp(struct osmo_ss7_as *as, const char *asp_name)
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:98: warning: unable to resolve reference to 'as' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: The following parameter of osmo_ss7_as_add_asp(struct osmo_ss7_as *as, const char *asp_name) is not documented:
#11 10.91 parameter 'asp_name'
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: unable to resolve reference to 'asp' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: argument 'asp' of command @param is not found in the argument list of osmo_ss7_as_del_asp(struct osmo_ss7_as *as, const char *asp_name)
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:128: warning: unable to resolve reference to 'as' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: The following parameter of osmo_ss7_as_del_asp(struct osmo_ss7_as *as, const char *asp_name) is not documented:
#11 10.91 parameter 'asp_name'
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:177: warning: unable to resolve reference to 'asp' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:178: warning: unable to resolve reference to 'as' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:179: warning: unable to resolve reference to 'asp' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7_as.c:179: warning: unable to resolve reference to 'as' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7.c:1002: warning: unable to resolve reference to 'asp' for \ref command
#11 10.91 /data/libosmo-sccp/src/osmo_ss7.c:733: warning: unable to resolve reference to 'pc' for \ref command
#11 10.92 /data/libosmo-sccp/src/osmo_ss7_xua_srv.c:251: warning: argument 'ctx' of command @param is not found in the argument list of osmo_ss7_xua_server_create(struct osmo_ss7_instance *inst, enum osmo_ss7_asp_protocol proto, uint16_t local_port, const char *local_host)
#11 10.92 /data/libosmo-sccp/src/osmo_ss7_xua_srv.c:251: warning: The following parameter of osmo_ss7_xua_server_create(struct osmo_ss7_instance *inst, enum osmo_ss7_asp_protocol proto, uint16_t local_port, const char *local_host) is not documented:
#11 10.92 parameter 'inst'
#11 10.92 /data/libosmo-sccp/src/osmo_ss7_vty.c:2259: warning: argument 'name' of command @param is not found in the argument list of osmo_sccp_name_by_addr(const struct osmo_sccp_addr *addr)
#11 10.92 /data/libosmo-sccp/src/osmo_ss7_vty.c:2259: warning: The following parameter of osmo_sccp_name_by_addr(const struct osmo_sccp_addr *addr) is not documented:
#11 10.92 parameter 'addr'
#11 10.92 /data/libosmo-sccp/src/sccp_user.c:136: warning: The following parameter of osmo_sccp_user_bind(struct osmo_sccp_instance *inst, const char *name, osmo_prim_cb prim_cb, uint16_t ssn) is not documented:
#11 10.92 parameter 'prim_cb'
#11 10.92 /data/libosmo-sccp/src/sccp_user.c:123: warning: The following parameter of osmo_sccp_user_bind_pc(struct osmo_sccp_instance *inst, const char *name, osmo_prim_cb prim_cb, uint16_t ssn, uint32_t pc) is not documented:
#11 10.92 parameter 'prim_cb'
#11 10.93 /data/libosmo-sccp/src/xua_msg.c:433: warning: unable to resolve reference to 'maps' for \ref command
#11 10.93 /data/libosmo-sccp/src/xua_msg.c:431: warning: The following parameter of xua_msg_event_map(const struct xua_msg *xua, const struct xua_msg_event_map *maps, unsigned int num_maps) is not documented:
#11 10.93 parameter 'num_maps'
#11 10.93 /data/libosmo-sccp/src/m3ua.c:685: warning: unable to resolve reference to 'msg' for \ref command
#11 10.93 /data/libosmo-sccp/src/m3ua.c:901: warning: argument 'info_string' of command @param is not found in the argument list of m3ua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str)
#11 10.93 /data/libosmo-sccp/src/m3ua.c:901: warning: The following parameter of m3ua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str) is not documented:
#11 10.93 parameter 'info_str'
#11 10.93 /data/libosmo-sccp/src/m3ua.c:487: warning: unable to resolve reference to 'xua' for \ref command
#11 10.93 /data/libosmo-sccp/src/osmo_ss7.c:1002: warning: unable to resolve reference to 'asp' for \ref command
#11 10.93 /data/libosmo-sccp/src/osmo_ss7.c:733: warning: unable to resolve reference to 'pc' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: unable to resolve reference to 'asp' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: argument 'asp' of command @param is not found in the argument list of osmo_ss7_as_add_asp(struct osmo_ss7_as *as, const char *asp_name)
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:98: warning: unable to resolve reference to 'as' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:97: warning: The following parameter of osmo_ss7_as_add_asp(struct osmo_ss7_as *as, const char *asp_name) is not documented:
#11 10.94 parameter 'asp_name'
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: unable to resolve reference to 'asp' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: argument 'asp' of command @param is not found in the argument list of osmo_ss7_as_del_asp(struct osmo_ss7_as *as, const char *asp_name)
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:128: warning: unable to resolve reference to 'as' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:127: warning: The following parameter of osmo_ss7_as_del_asp(struct osmo_ss7_as *as, const char *asp_name) is not documented:
#11 10.94 parameter 'asp_name'
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:177: warning: unable to resolve reference to 'asp' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:178: warning: unable to resolve reference to 'as' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:179: warning: unable to resolve reference to 'asp' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_as.c:179: warning: unable to resolve reference to 'as' for \ref command
#11 10.94 /data/libosmo-sccp/src/osmo_ss7_asp.c:459: warning: The following parameter of ss7_asp_find_by_socket_addr(int fd, int trans_proto) is not documented:
#11 10.94 parameter 'trans_proto'
#11 10.95 /data/libosmo-sccp/src/osmo_ss7_vty.c:2259: warning: argument 'name' of command @param is not found in the argument list of osmo_sccp_name_by_addr(const struct osmo_sccp_addr *addr)
#11 10.95 /data/libosmo-sccp/src/osmo_ss7_vty.c:2259: warning: The following parameter of osmo_sccp_name_by_addr(const struct osmo_sccp_addr *addr) is not documented:
#11 10.95 parameter 'addr'
#11 10.95 /data/libosmo-sccp/src/osmo_ss7_xua_srv.c:251: warning: argument 'ctx' of command @param is not found in the argument list of osmo_ss7_xua_server_create(struct osmo_ss7_instance *inst, enum osmo_ss7_asp_protocol proto, uint16_t local_port, const char *local_host)
#11 10.95 /data/libosmo-sccp/src/osmo_ss7_xua_srv.c:251: warning: The following parameter of osmo_ss7_xua_server_create(struct osmo_ss7_instance *inst, enum osmo_ss7_asp_protocol proto, uint16_t local_port, const char *local_host) is not documented:
#11 10.95 parameter 'inst'
#11 10.95 /data/libosmo-sccp/src/sccp2sua.c:92: warning: unable to resolve reference to 'in_digits' for \ref command
#11 10.95 /data/libosmo-sccp/src/sccp2sua.c:69: warning: unable to resolve reference to 'in' for \ref command
#11 10.95 /data/libosmo-sccp/src/sccp2sua.c:224: warning: unable to resolve reference to 'msg' for \ref command
#11 10.95 /data/libosmo-sccp/src/sccp2sua.c:116: warning: unable to resolve reference to 'addr' for \ref command
#11 10.95 /data/libosmo-sccp/src/sccp2sua.c:320: warning: unable to resolve reference to 'addr' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:682: warning: The following parameter of sccp_msg_add_sua_opt(enum sccp_message_types type, struct msgb *msg, const struct xua_msg_part *opt) is not documented:
#11 10.96 parameter 'type'
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1176: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1140: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1209: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1300: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1638: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1599: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1429: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1559: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:797: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1271: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1238: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1332: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1468: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1382: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1519: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1189: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1156: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:1221: warning: unable to resolve reference to 'xua' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp2sua.c:565: warning: unable to resolve reference to 'opt' for \ref command
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:143: warning: argument 'on' of command @param is not found in the argument list of sccp_sclc_user_sap_down(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph)
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:143: warning: The following parameter of sccp_sclc_user_sap_down(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph) is not documented:
#11 10.96 parameter 'oph'
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:119: warning: argument 'on' of command @param is not found in the argument list of sccp_sclc_user_sap_down_nofree(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph)
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:119: warning: The following parameter of sccp_sclc_user_sap_down_nofree(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph) is not documented:
#11 10.96 parameter 'oph'
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:143: warning: argument 'on' of command @param is not found in the argument list of sccp_sclc_user_sap_down(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph)
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:143: warning: The following parameter of sccp_sclc_user_sap_down(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph) is not documented:
#11 10.96 parameter 'oph'
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:119: warning: argument 'on' of command @param is not found in the argument list of sccp_sclc_user_sap_down_nofree(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph)
#11 10.96 /data/libosmo-sccp/src/sccp_sclc.c:119: warning: The following parameter of sccp_sclc_user_sap_down_nofree(struct osmo_sccp_user *scu, struct osmo_prim_hdr *oph) is not documented:
#11 10.96 parameter 'oph'
#11 10.97 /data/libosmo-sccp/src/sccp_user.c:881: warning: argument 'sccp' of command @param is not found in the argument list of osmo_sccp_set_max_optional_data(struct osmo_sccp_instance *inst, int val)
#11 10.97 /data/libosmo-sccp/src/sccp_user.c:881: warning: The following parameter of osmo_sccp_set_max_optional_data(struct osmo_sccp_instance *inst, int val) is not documented:
#11 10.97 parameter 'inst'
#11 10.97 /data/libosmo-sccp/src/sccp_user.c:136: warning: The following parameter of osmo_sccp_user_bind(struct osmo_sccp_instance *inst, const char *name, osmo_prim_cb prim_cb, uint16_t ssn) is not documented:
#11 10.97 parameter 'prim_cb'
#11 10.97 /data/libosmo-sccp/src/sccp_user.c:123: warning: The following parameter of osmo_sccp_user_bind_pc(struct osmo_sccp_instance *inst, const char *name, osmo_prim_cb prim_cb, uint16_t ssn, uint32_t pc) is not documented:
#11 10.97 parameter 'prim_cb'
#11 10.97 /data/libosmo-sccp/src/sccp_user.c:88: warning: The following parameter of sccp_user_bind_pc(struct osmo_sccp_instance *inst, const char *name, osmo_prim_cb prim_cb, uint16_t ssn, uint32_t pc) is not documented:
#11 10.97 parameter 'prim_cb'
#11 10.98 /data/libosmo-sccp/src/osmo_ss7_asp.c:459: warning: The following parameter of ss7_asp_find_by_socket_addr(int fd, int trans_proto) is not documented:
#11 10.98 parameter 'trans_proto'
#11 10.98 /data/libosmo-sccp/src/sua.c:500: warning: unable to resolve reference to 'xua' for \ref command
#11 10.98 /data/libosmo-sccp/src/sua.c:674: warning: unable to resolve reference to 'msg' for \ref command
#11 10.98 /data/libosmo-sccp/src/sua.c:910: warning: argument 'info_string' of command @param is not found in the argument list of sua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str)
#11 10.98 /data/libosmo-sccp/src/sua.c:910: warning: The following parameter of sua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str) is not documented:
#11 10.98 parameter 'info_str'
#11 10.98 /data/libosmo-sccp/src/sua.c:302: warning: unable to resolve reference to 'xua' for \ref command
#11 10.99 ran/protocol/sccp_scmg.h...
#11 10.99 Generating code for file include/osmocom/sigtran/protocol/sua.h...
#11 10.99 Generating code for file include/osmocom/sigtran/sccp_helpers.h...
#11 10.99 Generating code for file include/osmocom/sigtran/sccp_sap.h...
#11 10.99 Generating code for file include/osmocom/sigtran/sigtran_sap.h...
#11 10.99 Generating code for file include/osmocom/sigtran/xua_msg.h...
#11 10.99 Generating code for file include/osmocom/sigtran/xua_types.h...
#11 10.99 Parsing code for file src/ipa.c...
#11 10.99 Parsing code for file src/m3ua.c...
#11 10.99 Parsing code for file src/mtp_pcap.c...
#11 10.99 Parsing code for file src/osmo_ss7.c...
#11 10.99 Parsing code for file src/osmo_ss7_as.c...
#11 10.99 Parsing code for file src/osmo_ss7_asp.c...
#11 10.99 Parsing code for file src/osmo_ss7_asp_peer.c...
#11 10.99 Parsing code for file src/osmo_ss7_hmrt.c...
#11 10.99 Parsing code for file src/osmo_ss7_vty.c...
#11 10.99 Parsing code for file src/osmo_ss7_xua_srv.c...
#11 10.99 Parsing code for file src/sccp.c...
#11 10.99 Parsing code for file src/sccp2sua.c...
#11 10.99 Parsing code for file src/sccp_helpers.c...
#11 10.99 Generating code for file src/sccp_internal.h...
#11 10.99 Parsing code for file src/sccp_lbcs.c...
#11 10.99 Parsing code for file src/sccp_sap.c...
#11 10.99 Parsing code for file src/sccp_sclc.c...
#11 10.99 Parsing code for file src/sccp_scmg.c...
#11 10.99 Parsing code for file src/sccp_scoc.c...
#11 10.99 Parsing code for file src/sccp_scrc.c...
#11 10.99 Parsing code for file src/sccp_types.c...
#11 10.99 Parsing code for file src/sccp_user.c...
#11 10.99 Parsing code for file src/sccp_vty.c...
#11 10.99 Generating code for file src/ss7_internal.h...
#11 10.99 Parsing code for file src/sua.c...
#11 10.99 Parsing code for file src/xua_as_fsm.c...
#11 10.99 Generating code for file src/xua_as_fsm.h...
#11 10.99 Parsing code for file src/xua_asp_fsm.c...
#11 10.99 Generating code for file src/xua_asp_fsm.h...
#11 10.99 Parsing code for file src/xua_default_lm_fsm.c...
#11 10.99 Generating code for file src/xua_internal.h...
#11 10.99 Parsing code for file src/xua_msg.c...
#11 10.99 Parsing code for file src/xua_rkm.c...
#11 10.99 Parsing code for file src/xua_shared.c...
#11 10.99 Parsing code for file src/xua_snm.c...
#11 10.99 Generating file documentation...
#11 10.99 Generating docs for file include/osmocom/sigtran/m2ua_types.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/mtp_sap.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/osmo_ss7.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/protocol/m3ua.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/protocol/mtp.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/protocol/sccp_scmg.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/protocol/sua.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/sccp_helpers.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/sccp_sap.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/sigtran_sap.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/xua_msg.h...
#11 10.99 Generating docs for file include/osmocom/sigtran/xua_types.h...
#11 10.99 Generating docs for file src/ipa.c...
#11 10.99 Generating docs for file src/m3ua.c...
#11 10.99 Generating docs for file src/mtp_pcap.c...
#11 10.99 Generating docs for file src/osmo_ss7.c...
#11 10.99 Generating docs for file src/osmo_ss7_as.c...
#11 10.99 Generating docs for file src/osmo_ss7_asp.c...
#11 10.99 Generating docs for file src/osmo_ss7_asp_peer.c...
#11 10.99 Generating docs for file src/osmo_ss7_hmrt.c...
#11 10.99 Generating docs for file src/osmo_ss7_vty.c...
#11 10.99 Generating docs for file src/osmo_ss7_xua_srv.c...
#11 10.99 Generating docs for file src/sccp.c...
#11 10.99 Generating docs for file src/sccp2sua.c...
#11 10.99 Generating docs for file src/sccp_helpers.c...
#11 10.99 Generating docs for file src/sccp_internal.h...
#11 10.99 Generating docs for file src/sccp_lbcs.c...
#11 10.99 Generating docs for file src/sccp_sap.c...
#11 10.99 Generating docs for file src/sccp_sclc.c...
#11 10.99 Generating docs for file src/sccp_scmg.c...
#11 10.99 Generating docs for file src/sccp_scoc.c...
#11 10.99 Generating docs for file src/sccp_scrc.c...
#11 10.99 Generating docs for file src/sccp_types.c...
#11 10.99 Generating docs for file src/sccp_user.c...
#11 10.99 Generating docs for file src/sccp_vty.c...
#11 10.99 Generating docs for file src/ss7_internal.h...
#11 10.99 Generating docs for file src/sua.c...
#11 10.99 Generating docs for file src/xua_as_fsm.c...
#11 10.99 Generating docs for file src/xua_as_fsm.h...
#11 10.99 Generating docs for file src/xua_asp_fsm.c...
#11 10.99 Generating docs for file src/xua_asp_fsm.h...
#11 10.99 Generating docs for file src/xua_default_lm_fsm.c...
#11 10.99 Generating docs for file src/xua_intern/data/libosmo-sccp/src/m3ua.c:685: warning: unable to resolve reference to 'msg' for \ref command
#11 10.99 /data/libosmo-sccp/src/m3ua.c:901: warning: argument 'info_string' of command @param is not found in the argument list of m3ua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str)
#11 10.99 /data/libosmo-sccp/src/m3ua.c:901: warning: The following parameter of m3ua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str) is not documented:
#11 10.99 parameter 'info_str'
#11 10.99 /data/libosmo-sccp/src/m3ua.c:487: warning: unable to resolve reference to 'xua' for \ref command
#11 10.99 /data/libosmo-sccp/src/sccp2sua.c:69: warning: unable to resolve reference to 'in' for \ref command
#11 10.99 /data/libosmo-sccp/src/sccp2sua.c:224: warning: unable to resolve reference to 'msg' for \ref command
#11 10.99 /data/libosmo-sccp/src/sccp2sua.c:116: warning: unable to resolve reference to 'addr' for \ref command
#11 10.99 /data/libosmo-sccp/src/sua.c:500: warning: unable to resolve reference to 'xua' for \ref command
#11 10.99 /data/libosmo-sccp/src/sua.c:674: warning: unable to resolve reference to 'msg' for \ref command
#11 10.99 /data/libosmo-sccp/src/sua.c:910: warning: argument 'info_string' of command @param is not found in the argument list of sua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str)
#11 10.99 /data/libosmo-sccp/src/sua.c:910: warning: The following parameter of sua_tx_dupu(struct osmo_ss7_asp *asp, const uint32_t *rctx, unsigned int num_rctx, uint32_t dpc, uint16_t user, uint16_t cause, const char *info_str) is not documented:
#11 10.99 parameter 'info_str'
#11 10.99 /data/libosmo-sccp/src/sua.c:302: warning: unable to resolve reference to 'xua' for \ref command
#11 10.99 /data/libosmo-sccp/src/xua_msg.c:433: warning: unable to resolve reference to 'maps' for \ref command
#11 10.99 /data/libosmo-sccp/src/xua_msg.c:431: warning: The following parameter of xua_msg_event_map(const struct xua_msg *xua, const struct xua_msg_event_map *maps, unsigned int num_maps) is not documented:
#11 10.99 parameter 'num_maps'
#11 11.01 /data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h:84: warning: unable to resolve reference to 'osmo_xua_servers' for \ref command
#11 11.01 /data/libosmo-sccp/include/osmocom/sigtran/osmo_ss7.h:84: warning: unable to resolve reference to 'osmo_xua_servers' for \ref command
#11 11.07 al.h...
#11 11.07 Generating docs for file src/xua_msg.c...
#11 11.07 Generating docs for file src/xua_rkm.c...
#11 11.07 Generating docs for file src/xua_shared.c...
#11 11.07 Generating docs for file src/xua_snm.c...
#11 11.07 Generating page documentation...
#11 11.07 Generating group documentation...
#11 11.07 Generating class documentation...
#11 11.07 Generating docs for compound ipa_asp_fsm_priv...
#11 11.07 Generating docs for compound lm_fsm_priv...
#11 11.07 Generating docs for compound m3ua_data_hdr...
#11 11.07 Generating docs for compound osmo_mtp_pause_param...
#11 11.07 Generating docs for compound osmo_mtp_prim...
#11 11.07 Generating docs for compound osmo_mtp_resume_param...
#11 11.07 Generating docs for compound osmo_mtp_status_param...
#11 11.07 Generating docs for compound osmo_mtp_transfer_param...
#11 11.07 Generating docs for compound osmo_sccp_addr...
#11 11.07 Generating docs for compound osmo_sccp_addr_entry...
#11 11.07 Generating docs for compound osmo_sccp_gt...
#11 11.07 Generating docs for compound osmo_sccp_instance...
#11 11.07 Generating docs for compound osmo_sccp_user...
#11 11.07 Generating docs for compound osmo_scu_connect_param...
#11 11.07 Generating docs for compound osmo_scu_data_param...
#11 11.07 Generating docs for compound osmo_scu_disconn_param...
#11 11.07 Generating docs for compound osmo_scu_notice_param...
#11 11.07 Generating docs for compound osmo_scu_pcstate_param...
#11 11.07 Generating docs for compound osmo_scu_prim...
#11 11.07 Generating docs for compound osmo_scu_reset_param...
#11 11.07 Generating docs for compound osmo_scu_state_param...
#11 11.07 Generating docs for compound osmo_scu_unitdata_param...
#11 11.07 Generating docs for compound osmo_ss7_as...
#11 11.07 Generating docs for compound osmo_ss7_asp...
#11 11.07 Generating docs for compound osmo_ss7_asp_peer...
#11 11.07 Generating docs for compound osmo_ss7_instance...
#11 11.07 Generating docs for compound osmo_ss7_link...
#11 11.07 Generating docs for compound osmo_ss7_linkset...
#11 11.07 Generating docs for compound osmo_ss7_pc_fmt...
#11 11.07 Generating docs for compound osmo_ss7_route...
#11 11.07 Generating docs for compound osmo_ss7_route_table...
#11 11.07 Generating docs for compound osmo_ss7_routing_key...
#11 11.07 Generating docs for compound osmo_ss7_user...
#11 11.07 Generating docs for compound osmo_xlm_prim...
#11 11.07 Generating docs for compound osmo_xlm_prim_error...
#11 11.07 Generating docs for compound osmo_xlm_prim_notify...
#11 11.07 Generating docs for compound osmo_xlm_prim_rk_dereg...
#11 11.07 Generating docs for compound osmo_xlm_prim_rk_reg...
#11 11.07 Generating docs for compound osmo_xua_layer_manager...
#11 11.07 Generating docs for compound osmo_xua_server...
#11 11.07 Generating docs for compound pcap_hdr...
#11 11.07 Generating docs for compound pcaprec_hdr...
#11 11.07 Generating docs for compound sccp_connection...
#11 11.07 Generating docs for compound sccp_data_callback...
#11 11.07 Generating docs for compound sccp_scmg_msg...
#11 11.07 Generating docs for compound sccp_system...
#11 11.07 Generating docs for compound udt_offsets...
#11 11.07 Generating docs for compound xua_as_fsm_priv...
#11 11.07 Generating docs for compound xua_asp_fsm_priv...
#11 11.07 Generating docs for compound xua_common_hdr...
#11 11.07 Generating docs for compound xua_dialect...
#11 11.07 Generating docs for compound xua_msg...
#11 11.07 Generating docs for compound xua_msg_class...
#11 11.07 Generating docs for compound xua_msg_event_map...
#11 11.07 Generating docs for compound xua_msg_part...
#11 11.07 Generating docs for compound xua_parameter_hdr...
#11 11.07 Generating concept documentation...
#11 11.07 Generating namespace index...
#11 11.07 Generating graph info page...
#11 11.07 Generating directory documentation...
#11 11.07 Generating index page...
#11 11.07 Generating page index...
#11 11.07 Generating module index...
#11 11.07 Generating namespace index...
#11 11.07 Generating namespace member index...
#11 11.07 Generating concept index...
#11 11.07 Generating annotated compound index...
#11 11.07 Generating alphabetical compound index...
#11 11.07 Generating hierarchical class index...
#11 11.07 Generating member index...
#11 11.07 Generating file index...
#11 11.07 Generating file member index...
#11 11.07 Generating example index...
#11 11.07 finalizing index lists...
#11 11.07 writing tag file...
#11 11.07 Running plantuml with JAVA...
#11 11.07 lookup cache used 2216/65536 hits=24409 misses=2370
#11 11.07 finished...
#11 11.07 cd ./doc && tar cf html.tar */html
#11 11.08 make[3]: Entering directory '/data/libosmo-sccp'
#11 11.08 make[3]: Nothing to be done for 'install-exec-am'.
#11 11.08 /usr/bin/mkdir -p '/usr/local/share/doc/libosmo-sccp'
#11 11.09 /usr/bin/mkdir -p '/usr/local/lib/pkgconfig'
#11 11.09 /usr/bin/install -c -m 644 ./doc/html.tar '/usr/local/share/doc/libosmo-sccp'
#11 11.09 /usr/bin/install -c -m 644 libosmo-sccp.pc libosmo-mtp.pc libosmo-sigtran.pc libosmo-xua.pc '/usr/local/lib/pkgconfig'
#11 11.09 make install-data-hook
#11 11.09 make[4]: Entering directory '/data/libosmo-sccp'
#11 11.09 cd /usr/local/share/doc/libosmo-sccp && tar xf html.tar && rm -f html.tar
#11 11.11 make[4]: Leaving directory '/data/libosmo-sccp'
#11 11.11 make[3]: Leaving directory '/data/libosmo-sccp'
#11 11.11 make[2]: Leaving directory '/data/libosmo-sccp'
#11 11.11 make[1]: Leaving directory '/data/libosmo-sccp'
#11 DONE 11.3s
#12 [7/7] COPY OSMO-STP.CFG /data/
#12 DONE 0.2s
#13 exporting to image
#13 exporting layers
#13 exporting layers 0.5s done
#13 writing image sha256:1b0ce8f68bb80247b9c4d2be49902812a457ce096e6f1887d71aa0d9c9dc52a1 done
#13 naming to docker.io/osmocom-build/osmo-stp-master:latest 0.0s done
#13 DONE 0.6s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/osmo-stp-master'
+ docker_image_exists osmo-stp-master
+ docker images -q osmocom-build/osmo-stp-master
+ test -n 1b0ce8f68bb8
+ list_osmo_packages debian-bookworm osmo-stp-master
+ local distro=debian-bookworm
+ local image=osmo-stp-master
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-stp-master -c
+ [ -n ]
+ set +x
### Installed Osmocom packages in: osmo-stp-master ###
ii libosmo-netif-dev:amd64 1.4.0.54.05ff.202404242026 amd64 Development headers for Osmocom network interface
ii libosmocodec4:amd64 1.9.0.196.9975.202404242026 amd64 Osmo codec library
ii libosmocoding0:amd64 1.9.0.196.9975.202404242026 amd64 Osmo coding library
ii libosmocore 1.9.0.196.9975.202404242026 amd64 Open Source MObile COMmunications CORE library (metapackage)
ii libosmocore-dev:amd64 1.9.0.196.9975.202404242026 amd64 Development headers for Open Source MObile COMmunications CORE library
ii libosmocore21:amd64 1.9.0.196.9975.202404242026 amd64 Osmo Core library
ii libosmoctrl0:amd64 1.9.0.196.9975.202404242026 amd64 Osmo control library
ii libosmogb14:amd64 1.9.0.196.9975.202404242026 amd64 Osmo GPRS GB library
ii libosmogsm20:amd64 1.9.0.196.9975.202404242026 amd64 Osmo GSM utility library
ii libosmoisdn0:amd64 1.9.0.196.9975.202404242026 amd64 Osmo ISDN utility library
ii libosmonetif11:amd64 1.4.0.54.05ff.202404242026 amd64 Common/shared code regarding network interface for OpenBSC
ii libosmosim2:amd64 1.9.0.196.9975.202404242026 amd64 Osmo SIM library
ii libosmousb0:amd64 1.9.0.196.9975.202404242026 amd64 Osmo USB library
ii libosmovty13:amd64 1.9.0.196.9975.202404242026 amd64 Osmo VTY library
ii osmocom-nightly 202404242026 amd64 Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master']
+ [ registry.osmocom.org = registry.osmocom.org ]
+ docker pull registry.osmocom.org/osmocom-build/debian-bookworm-titan
Using default tag: latest
latest: Pulling from osmocom-build/debian-bookworm-titan
1468e7ff95fc: Already exists
0db338178c86: Pulling fs layer
f7306b6eec98: Pulling fs layer
608dc7c734eb: Pulling fs layer
78f55fe27936: Pulling fs layer
648c075b6a38: Pulling fs layer
ecf02dadf923: Pulling fs layer
a16d0ab39a92: Pulling fs layer
2ba8664abe42: Pulling fs layer
723bf40c750e: Pulling fs layer
acefe5c1c1e4: Pulling fs layer
a5e4820df8e6: Pulling fs layer
903d306af108: Pulling fs layer
6d8d90f90872: Pulling fs layer
123041ac863d: Pulling fs layer
5fac5a1ff6a0: Pulling fs layer
723bf40c750e: Waiting
acefe5c1c1e4: Waiting
a5e4820df8e6: Waiting
5fac5a1ff6a0: Waiting
123041ac863d: Waiting
78f55fe27936: Waiting
903d306af108: Waiting
648c075b6a38: Waiting
ecf02dadf923: Waiting
6d8d90f90872: Waiting
a16d0ab39a92: Waiting
2ba8664abe42: Waiting
f7306b6eec98: Download complete
0db338178c86: Download complete
608dc7c734eb: Verifying Checksum
608dc7c734eb: Download complete
78f55fe27936: Verifying Checksum
78f55fe27936: Download complete
ecf02dadf923: Download complete
0db338178c86: Pull complete
a16d0ab39a92: Verifying Checksum
a16d0ab39a92: Download complete
2ba8664abe42: Verifying Checksum
2ba8664abe42: Download complete
f7306b6eec98: Pull complete
723bf40c750e: Verifying Checksum
723bf40c750e: Download complete
acefe5c1c1e4: Verifying Checksum
acefe5c1c1e4: Download complete
608dc7c734eb: Pull complete
a5e4820df8e6: Download complete
78f55fe27936: Pull complete
6d8d90f90872: Verifying Checksum
6d8d90f90872: Download complete
123041ac863d: Verifying Checksum
123041ac863d: Download complete
5fac5a1ff6a0: Download complete
903d306af108: Verifying Checksum
903d306af108: Download complete
648c075b6a38: Verifying Checksum
648c075b6a38: Download complete
648c075b6a38: Pull complete
ecf02dadf923: Pull complete
a16d0ab39a92: Pull complete
2ba8664abe42: Pull complete
723bf40c750e: Pull complete
acefe5c1c1e4: Pull complete
a5e4820df8e6: Pull complete
903d306af108: Pull complete
6d8d90f90872: Pull complete
123041ac863d: Pull complete
5fac5a1ff6a0: Pull complete
Digest: sha256:2ebe68208d112bb645bc24d4828b507f43ba00d0fe6c74be259e2a524d77a384
Status: Downloaded newer image for registry.osmocom.org/osmocom-build/debian-bookworm-titan:latest
registry.osmocom.org/osmocom-build/debian-bookworm-titan:latest
+ continue
+ [ registry.osmocom.org = registry.osmocom.org ]
+ docker_depends nplab-m3ua-test
+ local feed
+ depends=
+ [ -n ]
+ docker_distro_from_image_name nplab-m3ua-test
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z ]
+ docker_upstream_distro_from_image_name nplab-m3ua-test
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name nplab-m3ua-test
+ echo nplab-m3ua-test
+ dir=nplab-m3ua-test
+ pull_arg=--pull
+ grep ^FROM ../nplab-m3ua-test/Dockerfile
+ from_line=FROM $USER/sigtran-tests
+ grep -q $USER
+ echo FROM $USER/sigtran-tests
+ pull_arg=
+ set +x
Building image: nplab-m3ua-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ docker_osmo_ttcn3_branch
+ [ -n ]
+ echo master
+ make -C ../nplab-m3ua-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/nplab-m3ua-test OSMO_TTCN3_BRANCH=master
make: Entering directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/nplab-m3ua-test'
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r /home/osmocom-build/jenkins/workspace/nplab-m3ua-test/common .common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bookworm \
--build-arg DISTRO=debian-bookworm \
--build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg ASTERISK_BRANCH=sysmocom/master \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_DIA2GSUP_BRANCH=master \
--build-arg OSMO_EPDG_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
-t osmocom-build/nplab-m3ua-test:latest .
#0 building with "default" instance using docker driver
#1 [internal] load .dockerignore
#1 transferring context: 2B done
#1 DONE 0.1s
#2 [internal] load build definition from Dockerfile
#2 transferring dockerfile: 567B done
#2 DONE 0.1s
#3 [internal] load metadata for docker.io/osmocom-build/sigtran-tests:latest
#3 DONE 0.0s
#4 [internal] load build context
#4 transferring context: 7.76kB done
#4 DONE 0.0s
#5 [1/7] FROM docker.io/osmocom-build/sigtran-tests
#5 DONE 0.2s
#6 [2/7] RUN CD /tmp && git clone https://git.osmocom.org/nplab/m3ua-testtool
#6 0.280 Cloning into 'm3ua-testtool'...
#6 0.397 warning: redirecting to https://gitea.osmocom.org/nplab/m3ua-testtool/
#6 DONE 2.1s
#7 http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3
#7 ERROR: invalid response status 504
------
> http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3:
------
ERROR: failed to solve: failed to load cache key: invalid response status 504
make: *** [../make/Makefile:93: docker-build] Error 1
make: Leaving directory '/home/osmocom-build/jenkins/workspace/nplab-m3ua-test/nplab-m3ua-test'
+ exit 1
Build step 'Execute shell' marked build as failure
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Sending e-mails to: jenkins-notifications@lists.osmocom.org
Archiving artifacts
Finished: FAILURE
![[Jenkins]](/jenkins/static/342c126a/images/svgs/logo.svg){kind=logo}
