Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7204): Process ended prematurely: osmo-stp_10.42.42.5(pid=7204) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7204)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:18:41.245500 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.256304 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:18:41.411326 tst cs_paging_gprs_active.py: using LAC 36600 22:18:41.528488 tst cs_paging_gprs_active.py: using RAC 135 22:18:41.646518 tst cs_paging_gprs_active.py: using CellId 36600 22:18:41.762953 tst cs_paging_gprs_active.py: using BVCI 36601 22:18:41.785959 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.796767 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.807505 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.818255 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.829329 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.840160 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.850967 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.861623 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:41.872462 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:18:41.995793 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:18:42.292383 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:18:42.428071 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:18:42.762668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7194): Launched 22:18:43.039685 run iperf3-srv_10.42.42.10(pid=7195): Launched 22:18:43.238629 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:18:43.374622 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:18:43.709849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7196): Launched 22:18:43.986795 run iperf3-srv_10.42.42.10(pid=7197): Launched 22:18:44.185081 tst cs_paging_gprs_active.py:38: start network... 22:18:44.320186 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:18:44.827593 run create_hlr_db(pid=7198): Launched 22:18:45.014324 bus /gobi_6: Setting Powered False 22:18:46.034111 run create_hlr_db(pid=7198): Terminated: ok {rc=0} 22:18:46.462433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7200): Launched 22:18:46.895093 run osmo-hlr_10.42.42.2(pid=7201): Launched 22:18:47.146157 run osmo-stp_10.42.42.5: Starting osmo-stp 22:18:47.720739 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7203): Launched 22:18:48.021689 run osmo-stp_10.42.42.5(pid=7204): Launched 22:18:48.131642 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:18:48.655009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7206): Launched 22:18:48.762451 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:18:49.025166 run patchelf(pid=7207): Launched 22:18:49.200632 run osmo-stp_10.42.42.5(pid=7204): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7204)] 22:18:49.329426 run osmo-stp_10.42.42.5(pid=7204): stdout: | (launched: 2022-12-13_22:18:47.874168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:18:49.459110 run osmo-stp_10.42.42.5(pid=7204): stderr: | �[0;m�[38;5;43m20221213221848043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221848044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221848044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221848044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:18:49.584111 run osmo-stp_10.42.42.5(pid=7204): stdout: | (launched: 2022-12-13_22:18:47.874168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:18:49.707583 run osmo-stp_10.42.42.5(pid=7204): stderr: | �[0;m�[38;5;43m20221213221848043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221848044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221848044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221848044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221848045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:18:49.850958 run patchelf(pid=7207): Terminating (SIGINT) 22:18:50.019345 run patchelf(pid=7207): Terminated: ok {rc=0} 22:18:50.050388 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7204): Process ended prematurely: osmo-stp_10.42.42.5(pid=7204) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7204)] [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:18:50.059524 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 22:18:50.119232 run osmo-hlr_10.42.42.2(pid=7201): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7201)] 22:18:50.168091 run osmo-hlr_10.42.42.2(pid=7201): stdout: | (launched: 2022-12-13_22:18:46.621594) 22:18:50.217608 run osmo-hlr_10.42.42.2(pid=7201): stderr: | �[0;m�[1;31m20221213221847021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213221847022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213221847023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213221847023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213221847023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213221847023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213221847056 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213221847064 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213221847071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213221847071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:18:50.259440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7194): Terminating (SIGTERM) 22:18:50.298823 run iperf3-srv_10.42.42.10(pid=7195): Terminating (SIGTERM) 22:18:50.338197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7196): Terminating (SIGTERM) 22:18:50.377371 run iperf3-srv_10.42.42.10(pid=7197): Terminating (SIGTERM) 22:18:50.417327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7200): Terminating (SIGTERM) 22:18:50.457403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7203): Terminating (SIGTERM) 22:18:50.496887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7206): Terminating (SIGTERM) 22:18:50.506007 --- ParallelTerminationStrategy: PID 7194 died... 22:18:50.558979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7194): Terminated: ok {rc=0} 22:18:50.568391 --- ParallelTerminationStrategy: PID 7195 died... 22:18:50.620511 run iperf3-srv_10.42.42.10(pid=7195): Terminated {rc=256} 22:18:50.629834 --- ParallelTerminationStrategy: PID 7196 died... 22:18:50.682161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7196): Terminated: ok {rc=0} 22:18:50.691544 --- ParallelTerminationStrategy: PID 7197 died... 22:18:50.743579 run iperf3-srv_10.42.42.10(pid=7197): Terminated {rc=256} 22:18:50.752890 --- ParallelTerminationStrategy: PID 7200 died... 22:18:50.805368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7200): Terminated: ok {rc=0} 22:18:50.814742 --- ParallelTerminationStrategy: PID 7203 died... 22:18:50.867601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7203): Terminated: ok {rc=0} 22:18:50.877082 --- ParallelTerminationStrategy: PID 7206 died... 22:18:50.929542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7206): Terminated: ok {rc=0} 22:18:51.017872 bus /gobi_0: Setting Powered False 22:18:52.119906 bus /gobi_0: Setting Powered False 22:18:53.230187 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7204): Process ended prematurely: osmo-stp_10.42.42.5(pid=7204) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7204)]