Skipping 42 KB..
Full LogLibraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/codec'
make[3]: Leaving directory '/build/deps/libosmocore/src/codec'
Making install in gsm
make[3]: Entering directory '/build/deps/libosmocore/src/gsm'
GEN gsm0503_conv.c
Generating convolutional codes...
Generate 'xcch' definition
Generate 'tch_f24' definition
Generate 'tch_h24' definition
Generate 'tch_f48' definition
Generate 'tch_f96' definition
Generate 'tch_f144' definition
Generate 'rach' definition
Generate 'rach_ext' definition
Generate 'sch' definition
Generate 'cs2' definition
Generate 'cs3' definition
Generate 'cs2_np' definition
Generate 'cs3_np' definition
Generate 'tch_afs_12_2' definition
Generate 'tch_afs_10_2' definition
Generate 'tch_afs_7_95' definition
Generate 'tch_afs_7_4' definition
Generate 'tch_afs_6_7' definition
Generate 'tch_afs_5_9' definition
Generate 'tch_afs_5_15' definition
Generate 'tch_afs_4_75' definition
Generate 'tch_fr' definition
Generate 'tch_hr' definition
Generate 'tch_ahs_7_95' definition
Generate 'tch_ahs_7_4' definition
Generate 'tch_ahs_6_7' definition
Generate 'tch_ahs_5_9' definition
Generate 'tch_ahs_5_15' definition
Generate 'tch_ahs_4_75' definition
Generate 'tch_axs_sid_update' definition
Generate 'mcs1_dl_hdr' definition
Generate 'mcs1_ul_hdr' definition
Generate 'mcs1' definition
Generate 'mcs2' definition
Generate 'mcs3' definition
Generate 'mcs4' definition
Generate 'mcs5_dl_hdr' definition
Generate 'mcs5_ul_hdr' definition
Generate 'mcs5' definition
Generate 'mcs6' definition
Generate 'mcs7_dl_hdr' definition
Generate 'mcs7_ul_hdr' definition
Generate 'mcs7' definition
Generate 'mcs8' definition
Generate 'mcs9' definition
Generation complete.
make install-am
make[4]: Entering directory '/build/deps/libosmocore/src/gsm'
CC a5.lo
CC rxlev_stat.lo
CC tlv_parser.lo
CC comp128.lo
CC gsm48.lo
CC comp128v23.lo
CC gsm_utils.lo
CC rsl.lo
gsm_utils.c:106:9: note: '#pragma message: glibc 2.36 random detected'
106 | #pragma message ("glibc " OSMO_STRINGIFY_VAL(__GLIBC__) "." OSMO_STRINGIFY_VAL(__GLIBC_MINOR__) " random detected")
| ^~~~~~~
CC gsm48_arfcn_range_encode.lo
CC gsm48_ie.lo
CC gsm0808.lo
CC sysinfo.lo
CC gprs_cipher_core.lo
CC gprs_rlc.lo
CC gsm0480.lo
CC abis_nm.lo
CC gsm0502.lo
CC gsm0411_utils.lo
CC gsm0411_smc.lo
CC gsm0411_smr.lo
CC gsm0414.lo
CC lapdm.lo
CC kasumi.lo
CC gsm29205.lo
CC gsm_04_08_gprs.lo
CC auth_core.lo
CC auth_comp128v1.lo
CC auth_comp128v23.lo
CC auth_xor.lo
CC auth_xor_2g.lo
CC auth_milenage.lo
CC gea.lo
CC milenage/aes-internal.lo
CC milenage/aes-internal-enc.lo
CC milenage/milenage.lo
CC gan.lo
CC ipa.lo
CC gsm0341.lo
CC apn.lo
CC auth_tuak.lo
CC gprs_gea.lo
CC gsm0503_conv.lo
CC oap.lo
CC gsm0808_utils.lo
CC gsm23003.lo
CC gsm23236.lo
CC mncc.lo
CC bts_features.lo
CC oap_client.lo
CC gsm29118.lo
CC gsm48_rest_octets.lo
CC cbsp.lo
CC gsm48049.lo
CC gad.lo
CC bsslap.lo
CC bssmap_le.lo
CC kdf.lo
CC iuup.lo
CC gsm44021.lo
CC gsm44068.lo
CC rlp.lo
CC gsup.lo
CC gsup_sms.lo
CC milenage/aes-encblock.lo
CC tuak/KeccakP-1600-3gpp.lo
CC tuak/tuak.lo
CCLD libgsmint.la
CCLD libosmogsm.la
make[5]: Entering directory '/build/deps/libosmocore/src/gsm'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogsm.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmogsm.la'
libtool: install: (cd /build/deps/libosmocore/src/gsm; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -I/usr/include/p11-kit-1 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogsm.map -version-info 21:0:1 -no-undefined -o libosmogsm.la -rpath /build/deps/install/stow/libosmocore/lib libgsmint.la -ltalloc -lgnutls )
libtool: install: /usr/bin/install -c .libs/libosmogsm.so.20.1.0T /build/deps/install/stow/libosmocore/lib/libosmogsm.so.20.1.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogsm.so.20.1.0 libosmogsm.so.20 || { rm -f libosmogsm.so.20 && ln -s libosmogsm.so.20.1.0 libosmogsm.so.20; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogsm.so.20.1.0 libosmogsm.so || { rm -f libosmogsm.so && ln -s libosmogsm.so.20.1.0 libosmogsm.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogsm.lai /build/deps/install/stow/libosmocore/lib/libosmogsm.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Leaving directory '/build/deps/libosmocore/src/gsm'
make[4]: Leaving directory '/build/deps/libosmocore/src/gsm'
make[3]: Leaving directory '/build/deps/libosmocore/src/gsm'
Making install in coding
make[3]: Entering directory '/build/deps/libosmocore/src/coding'
CC gsm0503_interleaving.lo
CC gsm0503_parity.lo
CC gsm0503_mapping.lo
CC gsm0503_tables.lo
CC gsm0503_coding.lo
CC gsm0503_amr_dtx.lo
CCLD libosmocoding.la
make[4]: Entering directory '/build/deps/libosmocore/src/coding'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocoding.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmocoding.la'
libtool: install: (cd /build/deps/libosmocore/src/coding; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmocoding.map -version-info 3:1:3 -no-undefined -o libosmocoding.la -rpath /build/deps/install/stow/libosmocore/lib gsm0503_interleaving.lo gsm0503_mapping.lo gsm0503_tables.lo gsm0503_parity.lo gsm0503_coding.lo gsm0503_amr_dtx.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/codec/libosmocodec.la )
libtool: install: /usr/bin/install -c .libs/libosmocoding.so.0.3.1T /build/deps/install/stow/libosmocore/lib/libosmocoding.so.0.3.1
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocoding.so.0.3.1 libosmocoding.so.0 || { rm -f libosmocoding.so.0 && ln -s libosmocoding.so.0.3.1 libosmocoding.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocoding.so.0.3.1 libosmocoding.so || { rm -f libosmocoding.so && ln -s libosmocoding.so.0.3.1 libosmocoding.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocoding.lai /build/deps/install/stow/libosmocore/lib/libosmocoding.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/coding'
make[3]: Leaving directory '/build/deps/libosmocore/src/coding'
Making install in gb
make[3]: Entering directory '/build/deps/libosmocore/src/gb'
CC gprs_ns.lo
CC gprs_ns_frgre.lo
CC gprs_ns_vty.lo
CC gprs_bssgp.lo
CC gprs_ns_sns.lo
CC gprs_bssgp_util.lo
CC gprs_bssgp_vty.lo
CC gprs_bssgp_rim.lo
CC gprs_bssgp_bss.lo
CC gprs_ns2.lo
CC gprs_ns2_udp.lo
CC gprs_ns2_frgre.lo
CC gprs_ns2_fr.lo
CC gprs_ns2_vc_fsm.lo
CC gprs_ns2_sns.lo
CC gprs_ns2_message.lo
CC gprs_ns2_vty.lo
CC gprs_bssgp2.lo
CC bssgp_bvc_fsm.lo
CC common_vty.lo
CC frame_relay.lo
CCLD libosmogb.la
CCLD libosmogb-test.la
make[4]: Entering directory '/build/deps/libosmocore/src/gb'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogb.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmogb.la'
libtool: install: (cd /build/deps/libosmocore/src/gb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -fno-strict-aliasing -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogb.map -version-info 16:1:2 -no-undefined -o libosmogb.la -rpath /build/deps/install/stow/libosmocore/lib gprs_ns.lo gprs_ns_frgre.lo gprs_ns_vty.lo gprs_ns_sns.lo gprs_bssgp.lo gprs_bssgp_util.lo gprs_bssgp_vty.lo gprs_bssgp_rim.lo gprs_bssgp_bss.lo gprs_ns2.lo gprs_ns2_udp.lo gprs_ns2_frgre.lo gprs_ns2_fr.lo gprs_ns2_vc_fsm.lo gprs_ns2_sns.lo gprs_ns2_message.lo gprs_ns2_vty.lo gprs_bssgp2.lo bssgp_bvc_fsm.lo common_vty.lo frame_relay.lo -ltalloc ../../src/core/libosmocore.la ../../src/vty/libosmovty.la ../../src/gsm/libosmogsm.la )
libtool: install: /usr/bin/install -c .libs/libosmogb.so.14.2.1T /build/deps/install/stow/libosmocore/lib/libosmogb.so.14.2.1
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogb.so.14.2.1 libosmogb.so.14 || { rm -f libosmogb.so.14 && ln -s libosmogb.so.14.2.1 libosmogb.so.14; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogb.so.14.2.1 libosmogb.so || { rm -f libosmogb.so && ln -s libosmogb.so.14.2.1 libosmogb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogb.lai /build/deps/install/stow/libosmocore/lib/libosmogb.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/gb'
make[3]: Leaving directory '/build/deps/libosmocore/src/gb'
Making install in ctrl
make[3]: Entering directory '/build/deps/libosmocore/src/ctrl'
CC control_if.lo
CC fsm_ctrl_commands.lo
CC control_cmd.lo
CC control_vty.lo
CCLD libosmoctrl.la
make[4]: Entering directory '/build/deps/libosmocore/src/ctrl'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmoctrl.la'
libtool: install: (cd /build/deps/libosmocore/src/ctrl; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 9:0:9 -no-undefined -o libosmoctrl.la -rpath /build/deps/install/stow/libosmocore/lib control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la )
libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.9.0T /build/deps/install/stow/libosmocore/lib/libosmoctrl.so.0.9.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoctrl.so.0.9.0 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.9.0 libosmoctrl.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoctrl.so.0.9.0 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.9.0 libosmoctrl.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai /build/deps/install/stow/libosmocore/lib/libosmoctrl.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/ctrl'
make[3]: Leaving directory '/build/deps/libosmocore/src/ctrl'
Making install in pseudotalloc
make[3]: Entering directory '/build/deps/libosmocore/src/pseudotalloc'
make[4]: Entering directory '/build/deps/libosmocore/src/pseudotalloc'
make[4]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc'
make[3]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc'
Making install in sim
make[3]: Entering directory '/build/deps/libosmocore/src/sim'
CC core.lo
CC reader.lo
CC class_tables.lo
CC card_fs_sim.lo
CC card_fs_usim.lo
CC card_fs_isim.lo
CC card_fs_uicc.lo
CC card_fs_hpsim.lo
CC card_fs_tetra.lo
CC reader_pcsc.lo
CCLD libosmosim.la
make[4]: Entering directory '/build/deps/libosmocore/src/sim'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmosim.la'
libtool: install: (cd /build/deps/libosmocore/src/sim; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 3:3:1 -no-undefined -o libosmosim.la -rpath /build/deps/install/stow/libosmocore/lib core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite )
libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.3T /build/deps/install/stow/libosmocore/lib/libosmosim.so.2.1.3
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.3 libosmosim.so.2; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.3 libosmosim.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmosim.lai /build/deps/install/stow/libosmocore/lib/libosmosim.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/sim'
make[3]: Leaving directory '/build/deps/libosmocore/src/sim'
Making install in usb
make[3]: Entering directory '/build/deps/libosmocore/src/usb'
CC osmo_libusb.lo
CCLD libosmousb.la
make[4]: Entering directory '/build/deps/libosmocore/src/usb'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmousb.la'
libtool: install: (cd /build/deps/libosmocore/src/usb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath /build/deps/install/stow/libosmocore/lib osmo_libusb.lo ../../src/core/libosmocore.la -ltalloc -lusb-1.0 )
libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T /build/deps/install/stow/libosmocore/lib/libosmousb.so.0.0.1
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/deps/install/stow/libosmocore/lib/libosmousb.la
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/usb'
make[3]: Leaving directory '/build/deps/libosmocore/src/usb'
make[3]: Entering directory '/build/deps/libosmocore/src'
make[4]: Entering directory '/build/deps/libosmocore/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmocore/src'
make[3]: Leaving directory '/build/deps/libosmocore/src'
make[2]: Leaving directory '/build/deps/libosmocore/src'
Making install in utils
make[2]: Entering directory '/build/deps/libosmocore/utils'
make[3]: Entering directory '/build/deps/libosmocore/utils'
CC osmo-arfcn.o
CC osmo-auc-gen.o
CC osmo-config-merge.o
CC gsmtap-logsend.o
CC osmo-aka-verify.o
CC osmo-ns-dummy.o
CC osmo_sim_test-osmo-sim-test.o
CC osmo-ns-dummy-vty.o
CCLD osmo-auc-gen
CCLD osmo-arfcn
CCLD osmo-config-merge
CCLD osmo-gsmtap-logsend
CCLD osmo-aka-verify
CCLD osmo-sim-test
CCLD osmo-ns-dummy
make[4]: Entering directory '/build/deps/libosmocore/utils'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify osmo-gsmtap-logsend '/build/deps/install/stow/libosmocore/bin'
libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/deps/install/stow/libosmocore/bin/osmo-arfcn
libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/deps/install/stow/libosmocore/bin/osmo-auc-gen
libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/deps/install/stow/libosmocore/bin/osmo-config-merge
libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/deps/install/stow/libosmocore/bin/osmo-aka-verify
libtool: install: /usr/bin/install -c .libs/osmo-gsmtap-logsend /build/deps/install/stow/libosmocore/bin/osmo-gsmtap-logsend
make[4]: Leaving directory '/build/deps/libosmocore/utils'
make[3]: Leaving directory '/build/deps/libosmocore/utils'
make[2]: Leaving directory '/build/deps/libosmocore/utils'
Making install in tapset
make[2]: Entering directory '/build/deps/libosmocore/tapset'
make[3]: Entering directory '/build/deps/libosmocore/tapset'
make[3]: Nothing to be done for 'install-exec-am'.
make install-data-hook
make[4]: Entering directory '/build/deps/libosmocore/tapset'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/deps/libosmocore/tapset'
make[3]: Leaving directory '/build/deps/libosmocore/tapset'
make[2]: Leaving directory '/build/deps/libosmocore/tapset'
Making install in tests
make[2]: Entering directory '/build/deps/libosmocore/tests'
GEN conv/gsm0503_test_vectors.c
Generating test vectors...
Generate 'xcch' test vector
Generate 'tch_f24' test vector
Generate 'tch_h24' test vector
Generate 'tch_f48' test vector
Generate 'tch_f96' test vector
Generate 'tch_f144' test vector
Generate 'rach' test vector
Generate 'rach_ext' test vector
Generate 'sch' test vector
Generate 'cs2' test vector
Generate 'cs3' test vector
Generate 'cs2_np' test vector
Generate 'cs3_np' test vector
Generate 'tch_afs_12_2' test vector
Generate 'tch_afs_10_2' test vector
Generate 'tch_afs_7_95' test vector
Generate 'tch_afs_7_4' test vector
Generate 'tch_afs_6_7' test vector
Generate 'tch_afs_5_9' test vector
Generate 'tch_afs_5_15' test vector
Generate 'tch_afs_4_75' test vector
Generate 'tch_fr' test vector
Generate 'tch_hr' test vector
Generate 'tch_ahs_7_95' test vector
Generate 'tch_ahs_7_4' test vector
Generate 'tch_ahs_6_7' test vector
Generate 'tch_ahs_5_9' test vector
Generate 'tch_ahs_5_15' test vector
Generate 'tch_ahs_4_75' test vector
Generate 'tch_axs_sid_update' test vector
Generate 'mcs1_dl_hdr' test vector
Generate 'mcs1_ul_hdr' test vector
Generate 'mcs1' test vector
Generate 'mcs2' test vector
Generate 'mcs3' test vector
Generate 'mcs4' test vector
Generate 'mcs5_dl_hdr' test vector
Generate 'mcs5_ul_hdr' test vector
Generate 'mcs5' test vector
Generate 'mcs6' test vector
Generate 'mcs7_dl_hdr' test vector
Generate 'mcs7_ul_hdr' test vector
Generate 'mcs7' test vector
Generate 'mcs8' test vector
Generate 'mcs9' test vector
Generation complete.
make install-am
make[3]: Entering directory '/build/deps/libosmocore/tests'
make[4]: Entering directory '/build/deps/libosmocore/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmocore/tests'
make[3]: Leaving directory '/build/deps/libosmocore/tests'
make[2]: Leaving directory '/build/deps/libosmocore/tests'
make[2]: Entering directory '/build/deps/libosmocore'
make[3]: Entering directory '/build/deps/libosmocore'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/share/aclocal'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib/pkgconfig'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include'
/usr/bin/install -c osmo-release.sh '/build/deps/install/stow/libosmocore/bin'
/usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/deps/install/stow/libosmocore/share/aclocal'
/usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc libosmoisdn.pc '/build/deps/install/stow/libosmocore/lib/pkgconfig'
/usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include'
make install-data-hook
make[4]: Entering directory '/build/deps/libosmocore'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/deps/libosmocore'
make[3]: Leaving directory '/build/deps/libosmocore'
make[2]: Leaving directory '/build/deps/libosmocore'
make[1]: Leaving directory '/build/deps/libosmocore'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmocore
+ CONFIG=
+ [ 1 = 1 ]
+ CONFIG=--enable-manuals
+ set +x
+ cd /build
=============================== osmo-e1d ===============================
+ autoreconf --install --force
aclocal: warning: couldn't open directory 'm4': No such file or directory
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:46: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:46: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:46: the top level
configure.ac:137: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:137: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:137: the top level
configure.ac:180: warning: AC_OUTPUT should be used without arguments.
configure.ac:180: You should run autoupdate.
configure.ac:9: installing './compile'
configure.ac:9: installing './config.guess'
configure.ac:9: installing './config.sub'
configure.ac:11: installing './install-sh'
configure.ac:11: installing './missing'
src/Makefile.am:70: warning: source file 'e1gen/crc4itu.c' is in a subdirectory,
src/Makefile.am:70: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least one source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However, this
automake: behavior may change in a future Automake major version, with object
automake: files being placed in the same subdirectory as the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/Makefile.am:70: warning: source file 'e1gen/osmo_e1f.c' is in a subdirectory,
src/Makefile.am:70: but option 'subdir-objects' is disabled
src/Makefile.am: installing './depcomp'
+ ./configure --enable-sanitize --enable-werror --enable-manuals
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking for gawk... gawk
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for talloc >= 2.0.1... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmousb >= 1.10.0... yes
checking for libusb-1.0 >= 1.0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
checking whether to enable VTY/CTRL tests... no
checking for doxygen... /usr/bin/doxygen
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Doxyfile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating src/Makefile
config.status: creating src/octoi/Makefile
config.status: creating include/Makefile
config.status: creating tests/Makefile
config.status: creating tests/rifo/Makefile
config.status: creating libosmo-e1d.pc
config.status: creating libosmo-octoi.pc
config.status: executing libtool commands
config.status: executing depfiles commands
config.status: executing tests/atconfig commands
+ make -j 8
echo 0.7.0 > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '/build'
Making all in contrib
make[2]: Entering directory '/build/contrib'
Making all in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
Making all in manuals
make[3]: Entering directory '/build/doc/manuals'
ln -s /opt/osmo-gsm-manuals/build build
ln -s /opt/osmo-gsm-manuals/common common
if ! [ -f osmoe1d-usermanual.adoc ]; then \
ln -s osmoe1d-usermanual.adoc osmoe1d-usermanual.adoc; \
fi
TEXINPUTS="/opt/osmo-gsm-manuals" \
a2x -vv -L --asciidoc-opts="-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' " --dblatex-opts="--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 " -a docinfo -a revnumber="DRAFT 0.7.0" -a revdate="2024-Jul-24" osmoe1d-usermanual.adoc
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /build/doc/manuals/osmoe1d-usermanual.adoc
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: writing: /build/doc/manuals/osmoe1d-usermanual.xml
asciidoc: osmoe1d-usermanual.adoc: line 5: evaluating: {include:/build/doc/manuals/osmoe1d-usermanual-docinfo.xml}
asciidoc: include: /build/doc/manuals/common/chapters/preface.adoc
asciidoc: osmoe1d-usermanual.adoc: line 7: reading: /build/doc/manuals/common/chapters/preface.adoc
asciidoc: include: /build/doc/manuals/chapters/overview.adoc
asciidoc: osmoe1d-usermanual.adoc: line 9: reading: /build/doc/manuals/chapters/overview.adoc
asciidoc: overview.adoc: line 31: evaluating: {counter2:target-number}
asciidoc: overview.adoc: line 31: evaluating: {set2:target:osmoe1d-usermanual__1.svg}
asciidoc: overview.adoc: line 51: filtering: dot -o "/build/doc/manuals/osmoe1d-usermanual__1.svg" -T svg && echo " "
asciidoc: include: /build/doc/manuals/common/chapters/installation.adoc
asciidoc: osmoe1d-usermanual.adoc: line 11: reading: /build/doc/manuals/common/chapters/installation.adoc
asciidoc: include: /build/doc/manuals/chapters/running.adoc
asciidoc: osmoe1d-usermanual.adoc: line 13: reading: /build/doc/manuals/chapters/running.adoc
asciidoc: include: /build/doc/manuals/common/snippets/systemd.adoc
asciidoc: running.adoc: line 25: reading: /build/doc/manuals/common/snippets/systemd.adoc
asciidoc: include: /build/doc/manuals/chapters/client-interface.adoc
asciidoc: osmoe1d-usermanual.adoc: line 15: reading: /build/doc/manuals/chapters/client-interface.adoc
asciidoc: include: /build/doc/manuals/chapters/drivers.adoc
asciidoc: osmoe1d-usermanual.adoc: line 17: reading: /build/doc/manuals/chapters/drivers.adoc
asciidoc: include: /build/doc/manuals/chapters/tdmoip.adoc
asciidoc: osmoe1d-usermanual.adoc: line 19: reading: /build/doc/manuals/chapters/tdmoip.adoc
asciidoc: include: /build/doc/manuals/common/chapters/counters-overview.adoc
asciidoc: osmoe1d-usermanual.adoc: line 23: reading: /build/doc/manuals/common/chapters/counters-overview.adoc
asciidoc: include: /build/doc/manuals/common/chapters/vty.adoc
asciidoc: osmoe1d-usermanual.adoc: line 27: reading: /build/doc/manuals/common/chapters/vty.adoc
asciidoc: include: /build/doc/manuals/common/chapters/logging.adoc
asciidoc: osmoe1d-usermanual.adoc: line 29: reading: /build/doc/manuals/common/chapters/logging.adoc
asciidoc: include: /build/doc/manuals/common/chapters/vty_cpu_sched.adoc
asciidoc: osmoe1d-usermanual.adoc: line 33: reading: /build/doc/manuals/common/chapters/vty_cpu_sched.adoc
asciidoc: include: /build/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmoe1d-usermanual.adoc: line 37: reading: /build/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/doc/manuals/common/chapters/bibliography.adoc
asciidoc: osmoe1d-usermanual.adoc: line 39: reading: /build/doc/manuals/common/chapters/bibliography.adoc
asciidoc: include: /build/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmoe1d-usermanual.adoc: line 41: reading: /build/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmoe1d-usermanual.adoc: line 43: reading: /build/doc/manuals/common/chapters/gfdl.adoc
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 0.7.0', '-a', 'revdate=2024-Jul-24', 'osmoe1d-usermanual.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 0.7.0'), ('--attribute', 'revdate=2024-Jul-24'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/doc/manuals/osmoe1d-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 -V "/build/doc/manuals/osmoe1d-usermanual.xml"
Missing character └
Missing character ─
Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/doc/manuals/osmoe1d-usermanual.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/doc/manuals/osmoe1d-usermanual.xml
xsltproc -o osmoe1d-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmpl362ofsa/listings.xml' --param current.dir '/build/doc/manuals' /tmp/tmpl362ofsa/custom.xsl /build/doc/manuals/osmoe1d-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: client.
XRef to nonexistent id: client
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/doc/manuals/osmoe1d-usermanual__1.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
Build osmoe1d-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmoe1d-usermanual.tex
kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 1+0/600 --dpi 600 tctt0900
mktexpk: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1+0/600; nonstopmode; input tctt0900
This is METAFONT, Version 2.71828182 (TeX Live 2022/Debian) (preloaded base=mf)
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/tctt0900.mf
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/exbase.mf)
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/tctt.mf
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txsymb.mf
Ok (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/exaccess.mf
Ok) (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txpseudo.mf
Ok) (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txaccent.mf
Ok [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [27] [29])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txgen.mf
Ok [100] [109] [98] [99] [108])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txsymbol.mf
Ok [13] [18] [21] [22] [23] [24] [25] [26] [28] [31] [32] [36] [39] [44]
[45] [46] [42] [47] [60] [61] [62] [77] [79] [87] [110] [91] [93] [94] [95]
[96] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137]
[138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149]
[150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161]
[162] [163] [164] [165] [166] [167] [168] [169] [171] [172] [173] [174]
[175] [177] [176] [180] [181] [182] [183] [184] [187] [191] [214] [246])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txromod.mf
Ok [48] [49] [50] [51] [52] [53] [54] [55] [56] [57])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txrsuper.mf
Ok [185] [178] [179] [170] [186])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txrfract.mf
Ok [188] [189] [190]) ) ) )
Font metrics written on tctt0900.tfm.
Output written on tctt0900.600gf (128 characters, 17564 bytes).
Transcript written on tctt0900.log.
mktexpk: /build/.texlive2022/texmf-var/fonts/pk/ljfour/jknappen/ec/tctt0900.600pk: successfully generated.
running post-compilation scripts...
[index] the index file /tmp/tmpl362ofsa/osmoe1d-usermanual.idx is empty
osmoe1d-usermanual.aux MD5 checksum changed
osmoe1d-usermanual.toc MD5 checksum changed
the /tmp/tmpl362ofsa/osmoe1d-usermanual.aux file has changed
pdflatex -interaction=batchmode osmoe1d-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpl362ofsa/osmoe1d-usermanual.idx is empty
osmoe1d-usermanual.aux MD5 checksum changed
the /tmp/tmpl362ofsa/osmoe1d-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmoe1d-usermanual.pdf' successfully built
a2x: deleting /build/doc/manuals/osmoe1d-usermanual.xml
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
rm -rf ../doc/e1d; mkdir -p ../doc/e1d
cd .. && /usr/bin/doxygen Doxyfile
warning: Tag 'SYMBOL_CACHE_SIZE' at line 310 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'SHOW_DIRECTORIES' at line 519 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'COLS_IN_ALPHA_INDEX' at line 799 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'HTML_ALIGN_MEMBERS' at line 900 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'USE_INLINE_TREES' at line 1087 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'LATEX_SOURCE_CODE' at line 1247 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'XML_SCHEMA' at line 1339 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'XML_DTD' at line 1345 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'PERL_PATH' at line 1510 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'CLASS_DIAGRAMS' at line 1522 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'MSCGEN_PATH' at line 1531 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: argument 'a4wide' for option PAPER_TYPE is not a valid enum value
Using the default: a4!
/build/src/proto_clnt.c:72: warning: Found unknown command '@osmo'
/build/src/proto_clnt.c:508: warning: The following parameter of osmo_e1dp_client_event_register(struct osmo_e1dp_client *clnt, void(*cb)(enum osmo_e1dp_msg_type event, uint8_t intf, uint8_t line, uint8_t ts, uint8_t *data, int len)) is not documented:
parameter 'cb'
/build/src/proto_clnt.c:508: warning: The following parameter of osmo_e1dp_client_event_register(struct osmo_e1dp_client *clnt, void(*cb)(enum osmo_e1dp_msg_type event, uint8_t intf, uint8_t line, uint8_t ts, uint8_t *data, int len)) is not documented:
parameter 'cb'
/build/src/proto_clnt.c:72: warning: Found unknown command '@osmo'
/build/src/proto_clnt.c:72: warning: Found unknown command '@osmo'
Doxygen version used: 1.9.4
Searching for include files...
Searching for example files...
Searching for images...
Searching for dot files...
Searching for msc files...
Searching for dia files...
Searching for files to exclude
Searching INPUT for files to process...
Reading and parsing tag files
Parsing files
Preprocessing /build/include/osmocom/e1d/proto_clnt.h...
Parsing file /build/include/osmocom/e1d/proto_clnt.h...
Preprocessing /build/include/osmocom/e1d/proto.h...
Parsing file /build/include/osmocom/e1d/proto.h...
Preprocessing /build/src/proto_clnt.c...
Parsing file /build/src/proto_clnt.c...
Building macro definition list...
Building group list...
Building directory list...
Building namespace list...
Building file list...
Building class list...
Building concept list...
Computing nesting relations for classes...
Associating documentation with classes...
Associating documentation with concepts...
Building example list...
Searching for enumerations...
Searching for documented typedefs...
Searching for members imported via using declarations...
Searching for included using directives...
Searching for documented variables...
Building interface member list...
Building member list...
Searching for friends...
Searching for documented defines...
Computing class inheritance relations...
Computing class usage relations...
Flushing cached template relations that have become invalid...
Computing class relations...
Add enum values to enums...
Searching for member function documentation...
Creating members for template instances...
Building page list...
Search for main page...
Computing page relations...
Determining the scope of groups...
Sorting lists...
Determining which enums are documented
Computing member relations...
Building full member lists recursively...
Adding members to member groups.
Computing member references...
Inheriting documentation...
Generating disk names...
Adding source references...
Adding xrefitems...
Sorting member lists...
Setting anonymous enum type...
Computing dependencies between directories...
Generating citations page...
Counting members...
Counting data structures...
Resolving user defined references...
Finding anchors and sections in the documentation...
Transferring function references...
Combining using relations...
Adding members to index pages...
Correcting members for VHDL...
Computing tooltip texts...
Generating style sheet...
Generating search indices...
Generating example documentation...
Generating file sources...
Generating code for file include/osmocom/e1d/proto.h...
Generating code for file include/osmocom/e1d/proto_clnt.h...
Parsing code for file src/proto_clnt.c...
Generating file documentation...
Generating docs for file include/osmocom/e1d/proto.h...
Generating docs for file include/osmocom/e1d/proto_clnt.h...
Generating docs for file src/proto_clnt.c...
Generating page documentation...
Generating group documentation...
Generating class documentation...
Generating docs for compound osmo_e1dp_client...
Generating docs for compound osmo_e1dp_intf_info...
Generating docs for compound osmo_e1dp_line_config...
Generating docs for compound osmo_e1dp_line_info...
Generating docs for compound osmo_e1dp_msg_hdr...
Generating docs for compound osmo_e1dp_ts_config...
Generating docs for compound osmo_e1dp_ts_info...
Generating concept documentation...
Generating namespace index...
Generating graph info page...
Generating directory documentation...
Generating index page...
Generating page index...
Generating module index...
Generating namespace index...
Generating namespace member index...
Generating concept index...
Generating annotated compound index...
Generating alphabetical compound index...
Generating hierarchical class index...
Generating member index...
Generating file index...
Generating file member index...
Generating example index...
finalizing index lists...
writing tag file...
Running plantuml with JAVA...
lookup cache used 116/65536 hits=565 misses=126
finished...
cd ../doc && tar cf html.tar */html
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in src
make[2]: Entering directory '/build/src'
Making all in octoi
make[3]: Entering directory '/build/src/octoi'
CC frame_fifo.lo
CC frame_rifo.lo
CC e1oip.lo
CC octoi_fsm.lo
CC octoi.lo
CC octoi_sock.lo
CC octoi_srv_fsm.lo
CC octoi_srv_vty.lo
CC octoi_clnt_fsm.lo
CC octoi_clnt_vty.lo
CCLD libosmo-octoi.la
make[3]: Leaving directory '/build/src/octoi'
Making all in .
make[3]: Entering directory '/build/src'
CC ctl.o
CC intf_line.o
CC mux_demux.o
CC log.o
CC vty.o
CC usb.o
CC vpair.o
CC osmo-e1d.o
CC e1oip.o
CC proto.lo
CC proto_clnt.lo
CC proto_srv.lo
CC e1d-ts-pipe.o
CC crc4itu.o
CC osmo_e1f.o
CC osmo-e1gen.o
CCLD osmo-e1gen
CCLD libosmo-e1d.la
CCLD osmo-e1d
CCLD osmo-e1d-pipe
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making all in include
make[2]: Entering directory '/build/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/include'
Making all in tests
make[2]: Entering directory '/build/tests'
Making all in rifo
make[3]: Entering directory '/build/tests/rifo'
CC rifo_test.o
CCLD rifo_test
make[3]: Leaving directory '/build/tests/rifo'
make[3]: Entering directory '/build/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ make check
make check-recursive
make[1]: Entering directory '/build'
Making check in contrib
make[2]: Entering directory '/build/contrib'
Making check in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
Making check in manuals
make[3]: Entering directory '/build/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmoe1d-usermanual.check; \
fi
make[4]: Entering directory '/build/doc/manuals'
if ! [ -f osmoe1d-usermanual.adoc ]; then \
ln -s osmoe1d-usermanual.adoc osmoe1d-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmoe1d-usermanual.adoc > osmoe1d-usermanual.check 2>&1
touch osmoe1d-usermanual.check
make[4]: Leaving directory '/build/doc/manuals'
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
cd ../doc && tar cf html.tar */html
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making check in src
make[2]: Entering directory '/build/src'
Making check in octoi
make[3]: Entering directory '/build/src/octoi'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/octoi'
Making check in .
make[3]: Entering directory '/build/src'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making check in include
make[2]: Entering directory '/build/include'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/include'
Making check in tests
make[2]: Entering directory '/build/tests'
Making check in rifo
make[3]: Entering directory '/build/tests/rifo'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/tests/rifo'
make[3]: Entering directory '/build/tests'
make check-local
make[4]: Entering directory '/build/tests'
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME],' && \
echo ' [osmo-e1d])' && \
echo 'm4_define([AT_PACKAGE_TARNAME],' && \
echo ' [osmo-e1d])' && \
echo 'm4_define([AT_PACKAGE_VERSION],' && \
echo ' [0.7.0])' && \
echo 'm4_define([AT_PACKAGE_STRING],' && \
echo ' [osmo-e1d 0.7.0])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
echo ' [openbsc@lists.osmocom.org])'; \
echo 'm4_define([AT_PACKAGE_URL],' && \
echo ' [])'; \
} >'./package.m4'
/bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at
mv testsuite.tmp testsuite
/bin/bash './testsuite'
## -------------------------- ##
## osmo-e1d 0.7.0 test suite. ##
## -------------------------- ##
1: rifo ok
## ------------- ##
## Test results. ##
## ------------- ##
1 test was successful.
make python-tests
make[5]: Entering directory '/build/tests'
echo "Not running python-based tests (determined at configure-time)"
Not running python-based tests (determined at configure-time)
make[5]: Leaving directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'check-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ DISTCHECK_CONFIGURE_FLAGS=--enable-manuals --disable-manuals --disable-doxygen make distcheck
make dist-bzip2 am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-e1d-0.7.0"; then find "osmo-e1d-0.7.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1d-0.7.0" || { sleep 5 && rm -rf "osmo-e1d-0.7.0"; }; else :; fi
test -d "osmo-e1d-0.7.0" || mkdir "osmo-e1d-0.7.0"
(cd contrib && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make distdir-am
make[4]: Entering directory '/build/contrib'
(cd systemd && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
(cd doc && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make \
top_distdir="../../osmo-e1d-0.7.0" distdir="../../osmo-e1d-0.7.0/doc/examples" \
dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
j="../../osmo-e1d-0.7.0/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
(cd manuals && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd src && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
(cd octoi && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/src/octoi \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/octoi'
make distdir-am
make[6]: Entering directory '/build/src/octoi'
make[6]: Leaving directory '/build/src/octoi'
make[5]: Leaving directory '/build/src/octoi'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd include && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make distdir-am
make[4]: Entering directory '/build/include'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
(cd tests && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
(cd rifo && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/tests/rifo \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/rifo'
make distdir-am
make[6]: Entering directory '/build/tests/rifo'
make[6]: Leaving directory '/build/tests/rifo'
make[5]: Leaving directory '/build/tests/rifo'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make \
top_distdir="osmo-e1d-0.7.0" distdir="osmo-e1d-0.7.0" \
dist-hook
make[3]: Entering directory '/build'
echo 0.7.0 > osmo-e1d-0.7.0/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-e1d-0.7.0" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-e1d-0.7.0"
make[2]: Leaving directory '/build'
tardir=osmo-e1d-0.7.0 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-e1d-0.7.0.tar.bz2
make[1]: Leaving directory '/build'
if test -d "osmo-e1d-0.7.0"; then find "osmo-e1d-0.7.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1d-0.7.0" || { sleep 5 && rm -rf "osmo-e1d-0.7.0"; }; else :; fi
case 'osmo-e1d-0.7.0.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-e1d-0.7.0.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-e1d-0.7.0.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-e1d-0.7.0.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-e1d-0.7.0.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-e1d-0.7.0.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-e1d-0.7.0.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-e1d-0.7.0.zip ;;\
*.tar.zst*) \
zstd -dc osmo-e1d-0.7.0.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-e1d-0.7.0
chmod u+w osmo-e1d-0.7.0
mkdir osmo-e1d-0.7.0/_build osmo-e1d-0.7.0/_build/sub osmo-e1d-0.7.0/_inst
chmod a-w osmo-e1d-0.7.0
test -d osmo-e1d-0.7.0/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1d-0.7.0/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1d-0.7.0/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
--enable-manuals --disable-manuals --disable-doxygen \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-e1d-0.7.0.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking for gawk... gawk
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for talloc >= 2.0.1... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmousb >= 1.10.0... yes
checking for libusb-1.0 >= 1.0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking whether to enable VTY/CTRL tests... no
checking for doxygen... /usr/bin/doxygen
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Doxyfile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating src/Makefile
config.status: creating src/octoi/Makefile
config.status: creating include/Makefile
config.status: creating tests/Makefile
config.status: creating tests/rifo/Makefile
config.status: creating libosmo-e1d.pc
config.status: creating libosmo-octoi.pc
config.status: executing libtool commands
config.status: executing depfiles commands
config.status: executing tests/atconfig commands
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make all-recursive
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making all in contrib
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making all in doc
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making all in manuals
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making all in src
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making all in octoi
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
CC frame_fifo.lo
CC frame_rifo.lo
CC e1oip.lo
CC octoi.lo
CC octoi_sock.lo
CC octoi_fsm.lo
CC octoi_srv_fsm.lo
CC octoi_srv_vty.lo
CC octoi_clnt_fsm.lo
CC octoi_clnt_vty.lo
CCLD libosmo-octoi.la
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making all in .
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
CC ctl.o
CC intf_line.o
CC log.o
CC mux_demux.o
CC osmo-e1d.o
CC usb.o
CC vpair.o
CC vty.o
CC e1oip.o
CC proto.lo
CC proto_clnt.lo
CC proto_srv.lo
CCLD libosmo-e1d.la
CCLD osmo-e1d
CC e1d-ts-pipe.o
CCLD osmo-e1d-pipe
CC crc4itu.o
CC osmo_e1f.o
CC osmo-e1gen.o
CCLD osmo-e1gen
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making all in include
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making all in tests
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making all in rifo
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
CC rifo_test.o
CCLD rifo_test
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making dvi in doc
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making dvi in src
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making dvi in octoi
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making dvi in .
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making dvi in include
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making dvi in tests
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making dvi in rifo
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making check in contrib
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making check in doc
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making check in src
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making check in octoi
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making check in .
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making check in include
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making check in tests
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making check in rifo
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## -------------------------- ##
## osmo-e1d 0.7.0 test suite. ##
## -------------------------- ##
1: rifo ok
## ------------- ##
## Test results. ##
## ------------- ##
1 test was successful.
make python-tests
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
echo "Not running python-based tests (determined at configure-time)"
Not running python-based tests (determined at configure-time)
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making install in contrib
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-e1d.service '/build/osmo-e1d-0.7.0/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making install in doc
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-e1d.cfg '/build/osmo-e1d-0.7.0/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-e1d-0.7.0/_inst/share/doc/osmo-e1d/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make install-data-hook
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[6]: Nothing to be done for 'install-data-hook'.
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making install in src
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making install in octoi
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmo-octoi.la '/build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.so.3.0.0 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3.0.0
libtool: install: (cd /build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-octoi.so.3.0.0 libosmo-octoi.so.3 || { rm -f libosmo-octoi.so.3 && ln -s libosmo-octoi.so.3.0.0 libosmo-octoi.so.3; }; })
libtool: install: (cd /build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-octoi.so.3.0.0 libosmo-octoi.so || { rm -f libosmo-octoi.so && ln -s libosmo-octoi.so.3.0.0 libosmo-octoi.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.lai /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.a /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: install: chmod 644 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: install: ranlib /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/osmo-e1d-0.7.0/_inst/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/osmo-e1d-0.7.0/_inst/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making install in .
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmo-e1d.la '/build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.so.3.0.0 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3.0.0
libtool: install: (cd /build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-e1d.so.3.0.0 libosmo-e1d.so.3 || { rm -f libosmo-e1d.so.3 && ln -s libosmo-e1d.so.3.0.0 libosmo-e1d.so.3; }; })
libtool: install: (cd /build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-e1d.so.3.0.0 libosmo-e1d.so || { rm -f libosmo-e1d.so && ln -s libosmo-e1d.so.3.0.0 libosmo-e1d.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.lai /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.a /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: install: chmod 644 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: install: ranlib /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/osmo-e1d-0.7.0/_inst/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/osmo-e1d-0.7.0/_inst/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-e1d osmo-e1d-pipe '/build/osmo-e1d-0.7.0/_inst/bin'
libtool: install: /usr/bin/install -c .libs/osmo-e1d /build/osmo-e1d-0.7.0/_inst/bin/osmo-e1d
libtool: install: /usr/bin/install -c .libs/osmo-e1d-pipe /build/osmo-e1d-0.7.0/_inst/bin/osmo-e1d-pipe
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making install in include
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/include'
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/include/osmocom/e1d'
/usr/bin/install -c -m 644 ../../../include/osmocom/e1d/proto_clnt.h ../../../include/osmocom/e1d/proto.h ../../../include/osmocom/e1d/proto_srv.h '/build/osmo-e1d-0.7.0/_inst/include/osmocom/e1d'
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/include/osmocom/octoi'
/usr/bin/install -c -m 644 ../../../include/osmocom/octoi/octoi.h ../../../include/osmocom/octoi/e1oip_proto.h '/build/osmo-e1d-0.7.0/_inst/include/osmocom/octoi'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making install in tests
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making install in rifo
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-e1d-0.7.0/_inst/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmo-e1d.pc libosmo-octoi.pc '/build/osmo-e1d-0.7.0/_inst/lib/pkgconfig'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making installcheck in src
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making installcheck in octoi
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making installcheck in .
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making installcheck in include
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making installcheck in rifo
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-e1d-0.7.0/_inst/bin' \
## -------------------------- ##
## osmo-e1d 0.7.0 test suite. ##
## -------------------------- ##
1: rifo ok
## ------------- ##
## Test results. ##
## ------------- ##
1 test was successful.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
( cd '/build/osmo-e1d-0.7.0/_inst//lib/systemd/system' && rm -f osmo-e1d.service )
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
( cd '/build/osmo-e1d-0.7.0/_inst/etc/osmocom' && rm -f osmo-e1d.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-e1d-0.7.0/_inst/share/doc/osmo-e1d/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Nothing to be done for 'uninstall-hook'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making uninstall in src
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making uninstall in octoi
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
/bin/bash ../../libtool --mode=uninstall rm -f '/build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la'
libtool: uninstall: rm -f /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3.0.0 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so /build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making uninstall in .
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
( cd '/build/osmo-e1d-0.7.0/_inst/bin' && rm -f osmo-e1d osmo-e1d-pipe )
/bin/bash ../libtool --mode=uninstall rm -f '/build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la'
libtool: uninstall: rm -f /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3.0.0 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3 /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so /build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making uninstall in include
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
( cd '/build/osmo-e1d-0.7.0/_inst/include' && rm -f osmocom/e1d/proto_clnt.h osmocom/e1d/proto.h osmocom/e1d/proto_srv.h osmocom/octoi/octoi.h osmocom/octoi/e1oip_proto.h )
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making uninstall in rifo
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
( cd '/build/osmo-e1d-0.7.0/_inst/lib/pkgconfig' && rm -f libosmo-e1d.pc libosmo-octoi.pc )
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making install in contrib
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-e1d.service '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making install in doc
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-e1d.cfg '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/share/doc/osmo-e1d/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make install-data-hook
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[6]: Nothing to be done for 'install-data-hook'.
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making install in src
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making install in octoi
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmo-octoi.la '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.so.3.0.0 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3.0.0
libtool: install: (cd /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-octoi.so.3.0.0 libosmo-octoi.so.3 || { rm -f libosmo-octoi.so.3 && ln -s libosmo-octoi.so.3.0.0 libosmo-octoi.so.3; }; })
libtool: install: (cd /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-octoi.so.3.0.0 libosmo-octoi.so || { rm -f libosmo-octoi.so && ln -s libosmo-octoi.so.3.0.0 libosmo-octoi.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.lai /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la
libtool: install: /usr/bin/install -c .libs/libosmo-octoi.a /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: install: chmod 644 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: install: ranlib /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
libtool: warning: remember to run 'libtool --finish /build/osmo-e1d-0.7.0/_inst/lib'
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making install in .
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmo-e1d.la '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.so.3.0.0 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3.0.0
libtool: install: (cd /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-e1d.so.3.0.0 libosmo-e1d.so.3 || { rm -f libosmo-e1d.so.3 && ln -s libosmo-e1d.so.3.0.0 libosmo-e1d.so.3; }; })
libtool: install: (cd /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib && { ln -s -f libosmo-e1d.so.3.0.0 libosmo-e1d.so || { rm -f libosmo-e1d.so && ln -s libosmo-e1d.so.3.0.0 libosmo-e1d.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.lai /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la
libtool: install: /usr/bin/install -c .libs/libosmo-e1d.a /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: install: chmod 644 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: install: ranlib /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
libtool: warning: remember to run 'libtool --finish /build/osmo-e1d-0.7.0/_inst/lib'
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-e1d osmo-e1d-pipe '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/bin'
libtool: warning: 'libosmo-e1d.la' has not been installed in '/build/osmo-e1d-0.7.0/_inst/lib'
libtool: warning: 'octoi/libosmo-octoi.la' has not been installed in '/build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/osmo-e1d /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/bin/osmo-e1d
libtool: warning: 'libosmo-e1d.la' has not been installed in '/build/osmo-e1d-0.7.0/_inst/lib'
libtool: install: /usr/bin/install -c .libs/osmo-e1d-pipe /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/bin/osmo-e1d-pipe
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making install in include
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include'
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include/osmocom/e1d'
/usr/bin/install -c -m 644 ../../../include/osmocom/e1d/proto_clnt.h ../../../include/osmocom/e1d/proto.h ../../../include/osmocom/e1d/proto_srv.h '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include/osmocom/e1d'
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include/osmocom/octoi'
/usr/bin/install -c -m 644 ../../../include/osmocom/octoi/octoi.h ../../../include/osmocom/octoi/e1oip_proto.h '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include/osmocom/octoi'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making install in tests
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making install in rifo
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmo-e1d.pc libosmo-octoi.pc '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/pkgconfig'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst//lib/systemd/system' && rm -f osmo-e1d.service )
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
( cd '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/etc/osmocom' && rm -f osmo-e1d.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/share/doc/osmo-e1d/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Nothing to be done for 'uninstall-hook'.
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making uninstall in src
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making uninstall in octoi
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
/bin/bash ../../libtool --mode=uninstall rm -f '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la'
libtool: uninstall: rm -f /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.la /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3.0.0 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so.3 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.so /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-octoi.a
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making uninstall in .
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
( cd '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/bin' && rm -f osmo-e1d osmo-e1d-pipe )
/bin/bash ../libtool --mode=uninstall rm -f '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la'
libtool: uninstall: rm -f /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.la /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3.0.0 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so.3 /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.so /tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/libosmo-e1d.a
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making uninstall in include
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
( cd '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/include' && rm -f osmocom/e1d/proto_clnt.h osmocom/e1d/proto.h osmocom/e1d/proto_srv.h osmocom/octoi/octoi.h osmocom/octoi/e1oip_proto.h )
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making uninstall in rifo
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
( cd '/tmp/am-dc-25284//build/osmo-e1d-0.7.0/_inst/lib/pkgconfig' && rm -f libosmo-e1d.pc libosmo-octoi.pc )
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make dist-bzip2 am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
if test -d "osmo-e1d-0.7.0"; then find "osmo-e1d-0.7.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1d-0.7.0" || { sleep 5 && rm -rf "osmo-e1d-0.7.0"; }; else :; fi
test -d "osmo-e1d-0.7.0" || mkdir "osmo-e1d-0.7.0"
(cd contrib && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
(cd doc && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make \
top_distdir="../../osmo-e1d-0.7.0" distdir="../../osmo-e1d-0.7.0/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-e1d-0.7.0/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
(cd src && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
(cd octoi && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/src/octoi \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make distdir-am
make[7]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[7]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
(cd include && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
(cd tests && make top_distdir=../osmo-e1d-0.7.0 distdir=../osmo-e1d-0.7.0/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
(cd rifo && make top_distdir=../../osmo-e1d-0.7.0 distdir=../../osmo-e1d-0.7.0/tests/rifo \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make distdir-am
make[7]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[7]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[6]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[5]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make \
top_distdir="osmo-e1d-0.7.0" distdir="osmo-e1d-0.7.0" \
dist-hook
make[4]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
echo 0.7.0 > osmo-e1d-0.7.0/.tarball-version
make[4]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
test -n "" \
|| find "osmo-e1d-0.7.0" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-e1d-0.7.0/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-e1d-0.7.0"
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
tardir=osmo-e1d-0.7.0 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-e1d-0.7.0.tar.bz2
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
if test -d "osmo-e1d-0.7.0"; then find "osmo-e1d-0.7.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1d-0.7.0" || { sleep 5 && rm -rf "osmo-e1d-0.7.0"; }; else :; fi
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
make[1]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../contrib" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/contrib'
Making distclean in doc
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
rm -rf .libs _libs
test -z "" || rm -f
rm -f *.lo
test -z "" || rm -f
test . = "../../../doc" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/doc'
Making distclean in src
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making distclean in octoi
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
test -z "libosmo-octoi.la" || rm -f libosmo-octoi.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../../src/octoi" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/e1oip.Plo
rm -f ./.deps/frame_fifo.Plo
rm -f ./.deps/frame_rifo.Plo
rm -f ./.deps/octoi.Plo
rm -f ./.deps/octoi_clnt_fsm.Plo
rm -f ./.deps/octoi_clnt_vty.Plo
rm -f ./.deps/octoi_fsm.Plo
rm -f ./.deps/octoi_sock.Plo
rm -f ./.deps/octoi_srv_fsm.Plo
rm -f ./.deps/octoi_srv_vty.Plo
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src/octoi'
Making distclean in .
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/src'
rm -f osmo-e1d osmo-e1d-pipe
test -z "libosmo-e1d.la" || rm -f libosmo-e1d.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f osmo-e1gen
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../src" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
rm -f ./.deps/crc4itu.Po
rm -f ./.deps/ctl.Po
rm -f ./.deps/dahdi_trunkdev.Po
rm -f ./.deps/e1d-ts-pipe.Po
rm -f ./.deps/e1oip.Po
rm -f ./.deps/intf_line.Po
rm -f ./.deps/log.Po
rm -f ./.deps/mux_demux.Po
rm -f ./.deps/osmo-e1d.Po
rm -f ./.deps/osmo-e1gen.Po
rm -f ./.deps/osmo_e1f.Po
rm -f ./.deps/proto.Plo
rm -f ./.deps/proto_clnt.Plo
rm -f ./.deps/proto_srv.Plo
rm -f ./.deps/usb.Po
rm -f ./.deps/vpair.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/src'
Making distclean in include
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../include" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/include'
Making distclean in tests
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
Making distclean in rifo
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
rm -rf .libs _libs
rm -f rifo_test
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../../tests/rifo" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/rifo_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests/rifo'
make[3]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "" || rm -f
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1d-0.7.0/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "Doxyfile libosmo-e1d.pc libosmo-octoi.pc" || rm -f Doxyfile libosmo-e1d.pc libosmo-octoi.pc
test . = "../.." || test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-e1d-0.7.0/_build/sub'
if test -d "osmo-e1d-0.7.0"; then find "osmo-e1d-0.7.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1d-0.7.0" || { sleep 5 && rm -rf "osmo-e1d-0.7.0"; }; else :; fi
================================================
osmo-e1d-0.7.0 archives ready for distribution:
osmo-e1d-0.7.0.tar.bz2
================================================
+ [ 1 = 1 ]
+ [ 1 = 1 ]
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmoe1d-usermanual.pdf
* osmoe1d-usermanual.pdf: 504K
[ -n "osmo-e1d" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-e1d/master"
cp osmoe1d-usermanual.pdf "_publish_tmpdir/osmo-e1d/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-e1d" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-e1d/
osmo-e1d/master/
osmo-e1d/master/osmoe1d-usermanual.pdf
sent 8,307 bytes received 4,397 bytes 8,469.33 bytes/sec
total size is 515,682 speedup is 40.59
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make maintainer-clean
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
test -z "e1d/{html,latex}/* html.tar e1d/doxygen_sqlite3.db" || rm -f e1d/{html,latex}/* html.tar e1d/doxygen_sqlite3.db
rm: cannot remove 'e1d/html/search': Is a directory
make[2]: [Makefile:608: mostlyclean-generic] Error 1 (ignored)
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in octoi
make[2]: Entering directory '/build/src/octoi'
test -z "libosmo-octoi.la" || rm -f libosmo-octoi.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/e1oip.Plo
rm -f ./.deps/frame_fifo.Plo
rm -f ./.deps/frame_rifo.Plo
rm -f ./.deps/octoi.Plo
rm -f ./.deps/octoi_clnt_fsm.Plo
rm -f ./.deps/octoi_clnt_vty.Plo
rm -f ./.deps/octoi_fsm.Plo
rm -f ./.deps/octoi_sock.Plo
rm -f ./.deps/octoi_srv_fsm.Plo
rm -f ./.deps/octoi_srv_vty.Plo
rm -f Makefile
make[2]: Leaving directory '/build/src/octoi'
Making maintainer-clean in .
make[2]: Entering directory '/build/src'
rm -f osmo-e1d osmo-e1d-pipe
test -z "libosmo-e1d.la" || rm -f libosmo-e1d.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f osmo-e1gen
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f ./.deps/crc4itu.Po
rm -f ./.deps/ctl.Po
rm -f ./.deps/dahdi_trunkdev.Po
rm -f ./.deps/e1d-ts-pipe.Po
rm -f ./.deps/e1oip.Po
rm -f ./.deps/intf_line.Po
rm -f ./.deps/log.Po
rm -f ./.deps/mux_demux.Po
rm -f ./.deps/osmo-e1d.Po
rm -f ./.deps/osmo-e1gen.Po
rm -f ./.deps/osmo_e1f.Po
rm -f ./.deps/proto.Plo
rm -f ./.deps/proto_clnt.Plo
rm -f ./.deps/proto_srv.Plo
rm -f ./.deps/usb.Po
rm -f ./.deps/vpair.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in rifo
make[2]: Entering directory '/build/tests/rifo'
rm -rf .libs _libs
rm -f rifo_test
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/rifo_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/rifo'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "Doxyfile libosmo-e1d.pc libosmo-octoi.pc" || rm -f Doxyfile libosmo-e1d.pc libosmo-octoi.pc
test . = "." || test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing aclocal.m4
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/e1d/
Removing doc/examples/Makefile.in
Removing doc/libosmo-e1d.tag
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmoe1d-usermanual.check
Removing doc/manuals/osmoe1d-usermanual.html
Removing doc/manuals/osmoe1d-usermanual.pdf
Removing doc/manuals/osmoe1d-usermanual__1.svg
Removing include/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/
Removing missing
Removing osmo-e1d-0.7.0.tar.bz2
Removing src/.deps/
Removing src/Makefile.in
Removing src/octoi/.deps/
Removing src/octoi/Makefile.in
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/rifo/.deps/
Removing tests/rifo/Makefile.in
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins11633801965124216862.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-e1d/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-e1d/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2228774 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
