Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5232): Process ended prematurely: osmo-stp_10.42.42.5(pid=5232) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5232)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 22:02:01.355042 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:01.371723 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:02:01.558454 tst ping_idle_ping.py: using LAC 36511 22:02:01.697572 tst ping_idle_ping.py: using RAC 46 22:02:01.817209 tst ping_idle_ping.py: using CellId 36511 22:02:01.939590 tst ping_idle_ping.py: using BVCI 36512 22:02:01.964774 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:01.976402 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:01.987858 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:01.999377 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:02.010877 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:02.022305 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:02.034048 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:02:02.045583 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:02:02.320087 tst ping_idle_ping.py:24: start network... 22:02:02.442527 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:02:02.916593 run create_hlr_db(pid=5226): Launched 22:02:03.084760 bus /gobi_6: Setting Powered False 22:02:04.106194 run create_hlr_db(pid=5226): Terminated: ok {rc=0} 22:02:04.491215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5228): Launched 22:02:04.780483 run osmo-hlr_10.42.42.2(pid=5229): Launched 22:02:04.886819 run osmo-stp_10.42.42.5: Starting osmo-stp 22:02:05.392513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5231): Launched 22:02:05.683393 run osmo-stp_10.42.42.5(pid=5232): Launched 22:02:05.789788 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:02:06.296330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5234): Launched 22:02:06.399707 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:02:06.653128 run patchelf(pid=5235): Launched 22:02:06.823717 run osmo-stp_10.42.42.5(pid=5232): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5232)] 22:02:06.948696 run osmo-stp_10.42.42.5(pid=5232): stdout: | (launched: 2022-12-13_22:02:05.541371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:02:07.074258 run osmo-stp_10.42.42.5(pid=5232): stderr: | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220205710 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:02:07.195379 run osmo-stp_10.42.42.5(pid=5232): stdout: | (launched: 2022-12-13_22:02:05.541371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:02:07.315578 run osmo-stp_10.42.42.5(pid=5232): stderr: | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220205709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220205710 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220205710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:02:07.454770 run patchelf(pid=5235): Terminating (SIGINT) 22:02:07.620814 run patchelf(pid=5235): Terminated: ok {rc=0} 22:02:07.650747 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=5232): Process ended prematurely: osmo-stp_10.42.42.5(pid=5232) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5232)] [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 22:02:07.659354 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 22:02:07.717999 run osmo-hlr_10.42.42.2(pid=5229): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5229)] 22:02:07.766228 run osmo-hlr_10.42.42.2(pid=5229): stdout: | (launched: 2022-12-13_22:02:04.638848) 22:02:07.815365 run osmo-hlr_10.42.42.2(pid=5229): stderr: | �[0;m�[1;31m20221213220204814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220204814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220204814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220204814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220204814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220204815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220204830 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220204838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220204838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220204838 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:02:07.857099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5228): Terminating (SIGTERM) 22:02:07.896220 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5231): Terminating (SIGTERM) 22:02:07.935825 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5234): Terminating (SIGTERM) 22:02:07.944895 --- ParallelTerminationStrategy: PID 5228 died... 22:02:07.997605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5228): Terminated: ok {rc=0} 22:02:08.007108 --- ParallelTerminationStrategy: PID 5231 died... 22:02:08.059519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5231): Terminated: ok {rc=0} 22:02:08.069017 --- ParallelTerminationStrategy: PID 5234 died... 22:02:08.121352 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5234): Terminated: ok {rc=0} 22:02:08.203657 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5232): Process ended prematurely: osmo-stp_10.42.42.5(pid=5232) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5232)]