MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 19
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 19
MTC@f224826c8c36: Message with id 19 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 20
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 20
MTC@f224826c8c36: Message with id 20 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 21
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 21
MTC@f224826c8c36: Message with id 21 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "si2quater neighbor-list add uarfcn 23 42 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 22
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 22
MTC@f224826c8c36: Message with id 22 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 23
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 23
MTC@f224826c8c36: Message with id 23 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "write terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 24
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 25
MTC@f224826c8c36: Matching on port BSCVTY "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" with pattern "OpenBSC(*)" unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" with pattern "*% Unknown command." unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" with ? matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n logging filter all 1\n logging color 1\n logging print category 0\n logging timestamp 0\n logging print file 1\n logging level all everything\n logging level rll notice\n logging level cc notice\n logging level mm debug\n logging level rr notice\n logging level rsl notice\n logging level nm info\n logging level mncc notice\n logging level pag notice\n logging level meas notice\n logging level sccp notice\n logging level msc notice\n logging level mgcp notice\n logging level ho notice\n logging level db notice\n logging level ref notice\n logging level gprs debug\n logging level ns info\n logging level bssgp debug\n logging level llc debug\n logging level sndcp debug\n logging level nat notice\n logging level ctrl notice\n logging level smpp debug\n logging level filter debug\n logging level ranap debug\n logging level sua debug\n logging level pcu debug\n logging level lglobal notice\n logging level llapd notice\n logging level linp notice\n logging level lmux notice\n logging level lmi notice\n logging level lmib notice\n logging level lsms notice\n logging level lctrl notice\n logging level lgtp notice\n logging level lstats notice\n logging level lgsup notice\n logging level loap notice\n logging level lss7 notice\n logging level lsccp notice\n logging level lsua notice\n logging level lm3ua notice\n logging level lmgcp notice\n logging level ljibuf notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n type sysmobts\n band DCS1800\n cell_identity 20960\n location_area_code 13135\n dtx uplink force\n base_station_id_code 63\n ms max power 40\n cell reselection hysteresis 2\n rxlev access min 45\n periodic location update 6\n radio-link-timeout 4\n channel allocator ascending\n rach tx integer 7\n rach max transmission 4\n channel-descrption attach 0\n channel-descrption bs-pa-mfrms 3\n channel-descrption bs-ag-blks-res 2\n no access-control-class-ramping\n access-control-class-ramping-step-interval dynamic\n access-control-class-ramping-step-size 1\n system-information 2bis mode static\n system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n system-information 2ter mode static\n system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n early-classmark-sending allowed\n early-classmark-sending-3g allowed\n ip.access unit_id 1234 0\n oml ip.access stream_id 255 line 0\n neighbor-list mode automatic\n si2quater neighbor-list add uarfcn 23 42 0\n codec-support fr hr efr amr\n amr tch-f modes 7\n amr tch-f start-mode auto\n gprs mode gprs\n gprs 11bit_rach_support_for_egprs 0\n gprs routing area 0\n gprs network-control-order nc0\n gprs cell bvci 196\n gprs cell timer blocking-timer 3\n gprs cell timer blocking-retries 3\n gprs cell timer unblocking-retries 3\n gprs cell timer reset-timer 3\n gprs cell timer reset-retries 3\n gprs cell timer suspend-timer 10\n gprs cell timer suspend-retries 3\n gprs cell timer resume-timer 10\n gprs cell timer resume-retries 3\n gprs cell timer capability-update-timer 10\n gprs cell timer capability-update-retries 3\n gprs nsei 96\n gprs ns timer tns-block 3\n gprs ns timer tns-block-retries 3\n gprs ns timer tns-reset 3\n gprs ns timer tns-reset-retries 3\n gprs ns timer tns-test 30\n gprs ns timer tns-alive 3\n gprs ns timer tns-alive-retries 10\n gprs nsvc 0 nsvci 0\n gprs nsvc 0 local udp port 21000\n gprs nsvc 0 remote udp port 23000\n gprs nsvc 0 remote ip 172.18.0.21\n gprs nsvc 1 nsvci 0\n gprs nsvc 1 local udp port 0\n gprs nsvc 1 remote udp port 0\n gprs nsvc 1 remote ip 0.0.0.0\n no force-combined-si\n trx 0\n rf_locked 0\n arfcn 871\n nominal power 23\n max_power_red 20\n rsl e1 tei 0\n timeslot 0\n phys_chan_config CCCH+SDCCH4\n hopping enabled 0\n timeslot 1\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 2\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 3\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 4\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 5\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 6\n phys_chan_config TCH/H\n hopping enabled 0\n timeslot 7\n phys_chan_config PDCH\n hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 24
MTC@f224826c8c36: Message with id 24 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 25
MTC@f224826c8c36: Message with id 25 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 26
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 26
MTC@f224826c8c36: Message with id 26 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 8 s
MTC@f224826c8c36: Timeout T: 8 s
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=0 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=1 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=2 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=3 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=4 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=5 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=6 has #of SI=0
MTC@f224826c8c36: "TC_si_sched_13_2bis_2ter_2quater": TC=7 has #of SI=0
MTC@f224826c8c36: setverdict(fail): none -> fail reason: "No SI messages for TC=0!", new component reason: "No SI messages for TC=0!"
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_1 (25) in TC=0!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_2 (26) in TC=1!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=2!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=6!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=3!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=7!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Fail: No SYSTEM_INFORMATION_TYPE_2bis (2) in TC=5!
MTC@f224826c8c36: setverdict(fail): fail -> fail, component reason not changed
MTC@f224826c8c36: Error: Insufficient SI in array
MTC@f224826c8c36: Test.ttcn:162: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): fail -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_si_sched_13_2bis_2ter_2quater.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_si_sched_13_2bis_2ter_2quater finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_neci in module Test.
MTC@f224826c8c36: Test case TC_neci started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_neci.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Random number generator was initialized with seed 57.481566: srand48(-1931789805).
MTC@f224826c8c36: Function rnd() returned 0.120181.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "neci 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_neci.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_neci finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_cell_resel_hyst in module Test.
MTC@f224826c8c36: Test case TC_cell_resel_hyst started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_cell_resel_hyst.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.223772.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "cell reselection hysteresis 2"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_cell_resel_hyst.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_cell_resel_hyst finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_rxlev_acc_min in module Test.
MTC@f224826c8c36: Test case TC_rxlev_acc_min started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rxlev_acc_min.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.827643.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "rxlev access min 52"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_rxlev_acc_min.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_rxlev_acc_min finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_cellid in module Test.
MTC@f224826c8c36: Test case TC_cellid started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_cellid.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.391460.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "cell_identity 25654"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_cellid.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_cellid finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_lac in module Test.
MTC@f224826c8c36: Test case TC_lac started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_lac.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.750248.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "location_area_code 49167"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_lac.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_lac finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_rach_tx_int in module Test.
MTC@f224826c8c36: Test case TC_rach_tx_int started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rach_tx_int.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.444138.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "rach tx integer 6"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_rach_tx_int.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_rach_tx_int finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_rach_max_tx in module Test.
MTC@f224826c8c36: Test case TC_rach_max_tx started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rach_max_tx.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.958804.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "rach max transmission 4"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_rach_max_tx.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_rach_max_tx finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_attach in module Test.
MTC@f224826c8c36: Test case TC_attach started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_attach.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.880779.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "channel-descrption attach 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_attach.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_attach finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_dtx_ul in module Test.
MTC@f224826c8c36: Test case TC_dtx_ul started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_dtx_ul.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.448971.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "dtx uplink force"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_dtx_ul.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_dtx_ul finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_emerg_allowed in module Test.
MTC@f224826c8c36: Test case TC_emerg_allowed started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_emerg_allowed.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.662692.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "rach emergency call allowed 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_emerg_allowed.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_emerg_allowed finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_bs_pa_mfrms in module Test.
MTC@f224826c8c36: Test case TC_bs_pa_mfrms started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_bs_pa_mfrms.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.658402.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "channel-descrption bs-pa-mfrms 6"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_bs_pa_mfrms.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_bs_pa_mfrms finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_bs_ag_blks_res in module Test.
MTC@f224826c8c36: Test case TC_bs_ag_blks_res started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_bs_ag_blks_res.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.296318.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "channel-descrption bs-ag-blks-res 2"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_bs_ag_blks_res.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_bs_ag_blks_res finished. Verdict: error
MC@f224826c8c36: Test execution finished.
MTC@f224826c8c36: Executing test case TC_radio_link_timeout in module Test.
MTC@f224826c8c36: Test case TC_radio_link_timeout started.
MTC@f224826c8c36: Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_radio_link_timeout.
MTC@f224826c8c36: Port GSMTAP was started.
MTC@f224826c8c36: Port BSCVTY was started.
MTC@f224826c8c36: Component type Test.dummy_CT was initialized.
MTC@f224826c8c36: Function rnd() returned 0.074465.
MTC@f224826c8c36: Mapping port mtc:GSMTAP to system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was mapped to system:GSMTAP.
MTC@f224826c8c36: Map operation of mtc:GSMTAP to system:GSMTAP finished.
MTC@f224826c8c36: entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
MTC@f224826c8c36: Mapping port mtc:BSCVTY to system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was mapped to system:BSCVTY.
MTC@f224826c8c36: Map operation of mtc:BSCVTY to system:BSCVTY finished.
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
MTC@f224826c8c36: Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "enable"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
MTC@f224826c8c36: Message with id 1 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "configure terminal"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
MTC@f224826c8c36: Message with id 2 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "network"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
MTC@f224826c8c36: Message with id 3 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
MTC@f224826c8c36: Message with id 4 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "radio-link-timeout 8"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC(config-net-bts)# " with "OpenBSC# " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC(config-net-bts)# " with pattern "OpenBSC(*)" matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
MTC@f224826c8c36: Message with id 5 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "end"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
MTC@f224826c8c36: Message with id 6 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
MTC@f224826c8c36: Start timer T: 2 s
MTC@f224826c8c36: Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Matching on port BSCVTY "OpenBSC# " with "OpenBSC> " unmatched: First message in the queue does not match the template:
MTC@f224826c8c36: Matching on port BSCVTY succeeded: "OpenBSC# " with "OpenBSC# " matched
MTC@f224826c8c36: Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
MTC@f224826c8c36: Message with id 7 was extracted from the queue of BSCVTY.
MTC@f224826c8c36: Stop timer T: 2 s
MTC@f224826c8c36: Start timer T: 1 s
MTC@f224826c8c36: Timeout T: 1 s
MTC@f224826c8c36: Port GSMTAP was cleared.
MTC@f224826c8c36: Start timer T: 10 s
MTC@f224826c8c36: Timeout T: 10 s
MTC@f224826c8c36: Error waiting for SI on GSMTAP
MTC@f224826c8c36: Test.ttcn:478: Dynamic test case error: testcase.stop
MTC@f224826c8c36: setverdict(error): none -> error
MTC@f224826c8c36: Performing error recovery.
MTC@f224826c8c36: Terminating component type Test.dummy_CT.
MTC@f224826c8c36: Removing unterminated mapping between port GSMTAP and system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was unmapped from system:GSMTAP.
MTC@f224826c8c36: Port GSMTAP was stopped.
MTC@f224826c8c36: Removing unterminated mapping between port BSCVTY and system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was unmapped from system:BSCVTY.
MTC@f224826c8c36: Port BSCVTY was stopped.
MTC@f224826c8c36: Component type Test.dummy_CT was shut down inside testcase TC_radio_link_timeout.
MTC@f224826c8c36: Waiting for PTCs to finish.
MTC@f224826c8c36: Setting final verdict of the test case.
MTC@f224826c8c36: Local verdict of MTC: error
MTC@f224826c8c36: No PTCs were created.
MTC@f224826c8c36: Test case TC_radio_link_timeout finished. Verdict: error
MC@f224826c8c36: Test execution finished.
Execution of [EXECUTE] section finished.
emtc
MC@f224826c8c36: Terminating MTC.
MTC@f224826c8c36: Verdict statistics: 0 none (0.00 %), 3 pass (13.64 %), 0 inconc (0.00 %), 3 fail (13.64 %), 16 error (72.73 %).
MTC@f224826c8c36: Test execution summary: 22 test cases were executed. Overall verdict: error
MTC@f224826c8c36: Exit was requested from MC. Terminating MTC.
MC@f224826c8c36: MTC terminated.
MC2> exit
MC@f224826c8c36: Shutting down session.
HC@f224826c8c36: Exit was requested from MC. Terminating HC.
MC@f224826c8c36: Shutdown complete.
ttcn3_logmerge: warning: cannot open Test-hc.log-*.log: No such file or directory
Unsupported timestamp format.
Generated Test.hc.log.merged
ttcn3_logmerge: warning: cannot open Test-mtc.log-*.log: No such file or directory
Unsupported timestamp format.
Generated Test.mtc.log.merged
+ docker container stop jenkins-ttcn3-nitb-sysinfo-227-bts
jenkins-ttcn3-nitb-sysinfo-227-bts
+ docker container stop jenkins-ttcn3-nitb-sysinfo-227-nitb
jenkins-ttcn3-nitb-sysinfo-227-nitb
+ docker run --rm -v ttcn3-nitb-sysinfo-vol:/ttcn3-nitb-sysinfo -v nitb-vol:/nitb -v bts-vol:/bts --name jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper -d busybox /bin/sh -c sleep 1000 & wait
822b8ed5c9338d324571de2783d26afc45b7f624e7d66e84e09b4d0f022e60c1
+ rm -rf /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ mkdir -p /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper:/ttcn3-nitb-sysinfo /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper:/nitb /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper:/bts /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker container stop -t 0 jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper
jenkins-ttcn3-nitb-sysinfo-227-sysinfo-helper
+ network_remove
+ echo Removing network ttcn3-nitb-sysinfo
Removing network ttcn3-nitb-sysinfo
+ docker network remove ttcn3-nitb-sysinfo
ttcn3-nitb-sysinfo
Recording test results
Build step 'Publish JUnit test result report' changed build result to UNSTABLE
Sending e-mails to: laforge@gnumonks.org
Finished: UNSTABLE
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
