Skipping 498 KB.. Full Log

 /usr/bin/install -c -m 644 HNBAP_HNBConfigurationInformationMissing.h HNBAP_HNBConfigurationInformationProvided.h HNBAP_HNBDe-Register.h HNBAP_HNB-GWResponse.h HNBAP_HNB-Identity.h HNBAP_HNB-Identity-Info.h HNBAP_HNB-Location-Information.h HNBAP_HNBRegisterAccept.h HNBAP_HNBRegisterReject.h HNBAP_HNBRegisterRequest.h HNBAP_HNB-RNL-Identity.h HNBAP_IE-Extensions.h HNBAP_IE.h HNBAP_IMEI.h HNBAP_IMSIDS41.h HNBAP_IMSIESN.h HNBAP_IMSI.h HNBAP_InitiatingMessage.h HNBAP_IP-Address.h HNBAP_Ipv4Address.h HNBAP_Ipv6Address.h HNBAP_Iurh-Signalling-TNL-AddressList.h HNBAP_LAC.h HNBAP_LAI.h HNBAP_MacroCellID.h HNBAP_MacroCoverageInformation.h HNBAP_MuxPortNumber.h HNBAP_NeighbourCellIdentityList.h HNBAP_NeighbourIdentity.h HNBAP_NeighbourInfoList.h HNBAP_NeighbourInfoRequestItem.h HNBAP_NeighbourInfoRequestList.h HNBAP_PLMNidentity.h HNBAP_Presence.h HNBAP_PrivateIE-ID.h HNBAP_PrivateMessage.h HNBAP_ProcedureCode.h HNBAP_ProtocolIE-ID.h HNBAP_PSC.h HNBAP_PTMSI.h '/build/deps/install/stow/osmo-iuh/include/osmocom/hnbap'
 /usr/bin/install -c -m 644 HNBAP_PTMSIRAI.h HNBAP_RAB-ID.h HNBAP_RABList.h HNBAP_RABListItem.h HNBAP_RAC.h HNBAP_RAI.h HNBAP_Registration-Cause.h HNBAP_RelocationComplete.h HNBAP_RNC-ID.h HNBAP_SAC.h HNBAP_S-RNTIPrefix.h HNBAP_SuccessfulOutcome.h HNBAP_TMSIDS41.h HNBAP_TMSILAI.h HNBAP_TNLUpdateFailure.h HNBAP_TNLUpdateRequest.h HNBAP_TNLUpdateResponse.h HNBAP_TransportInfo.h HNBAP_TransportLayerAddress.h HNBAP_TriggeringMessage.h HNBAP_Tunnel-Information.h HNBAP_TypeOfError.h HNBAP_UDP-Port-Number.h HNBAP_UE-Capabilities.h HNBAP_UEDe-Register.h HNBAP_UE-Identity.h HNBAP_UERegisterAccept.h HNBAP_UERegisterReject.h HNBAP_UERegisterRequest.h HNBAP_UnknownU-RNTIIndication.h HNBAP_UnsuccessfulOutcome.h HNBAP_Update-cause.h HNBAP_URAIdentity.h HNBAP_URAIdentityList.h HNBAP_U-RNTI.h HNBAP_U-RNTIQueryRequest.h HNBAP_U-RNTIQueryResponse.h HNBAP_UTRANCellID.h '/build/deps/install/stow/osmo-iuh/include/osmocom/hnbap'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/hnbap'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/hnbap'
Making install in ranap
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/ranap'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/ranap'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 ranap_ies_defs.h ranap_common.h ranap_common_cn.h ranap_common_ran.h ranap_msg_factory.h iu_helpers.h iu_client.h RANAP_AccuracyFulfilmentIndicator.h RANAP_AllocationOrRetentionPriority.h RANAP_AlternativeRABConfigurationRequest.h RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrateInf.h RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_Alt-RAB-Parameter-ExtendedGuaranteedBitrates.h RANAP_Alt-RAB-Parameter-ExtendedMaxBitrateInf.h RANAP_Alt-RAB-Parameter-ExtendedMaxBitrateList.h RANAP_Alt-RAB-Parameter-ExtendedMaxBitrates.h RANAP_Alt-RAB-Parameter-GuaranteedBitrateInf.h RANAP_Alt-RAB-Parameter-GuaranteedBitrateList.h RANAP_Alt-RAB-Parameter-GuaranteedBitrates.h RANAP_Alt-RAB-Parameter-GuaranteedBitrateType.h RANAP_Alt-RAB-Parameter-MaxBitrateInf.h RANAP_Alt-RAB-Parameter-MaxBitrateList.h RANAP_Alt-RAB-Parameter-MaxBitrates.h RANAP_Alt-RAB-Parameter-MaxBitrateType.h RANAP_Alt-RAB-Parameters.h RANAP_Alt-RAB-Parameter-SupportedGuaranteedBitrateInf.h RANAP_Alt-RAB-Parameter-SupportedGuaranteedBitrates.h RANAP_Alt-RAB-Parameter-SupportedMaxBitrateInf.h RANAP_Alt-RAB-Parameter-SupportedMaxBitrates.h RANAP_APN.h RANAP_AreaIdentity.h RANAP_Ass-RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_Ass-RAB-Parameter-ExtendedMaxBitrateList.h RANAP_Ass-RAB-Parameter-GuaranteedBitrateList.h RANAP_Ass-RAB-Parameter-MaxBitrateList.h RANAP_Ass-RAB-Parameters.h RANAP_AuthorisedPLMNs.h RANAP_AuthorisedPLMNs-Value.h RANAP_AuthorisedSNAs.h RANAP_BindingID.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_BroadcastAssistanceDataDecipheringKeys.h RANAP_Cause.h RANAP_CauseMisc.h RANAP_CauseNAS.h RANAP_CauseNon-Standard.h RANAP_CauseProtocol.h RANAP_CauseRadioNetworkExtension.h RANAP_CauseRadioNetwork.h RANAP_CauseTransmissionNetwork.h RANAP_Cell-Access-Mode.h RANAP_CellBased.h RANAP_Cell-Capacity-Class-Value.h RANAP_Cell-Id.h RANAP_CellIdList.h RANAP_CellLoadInformationGroup.h RANAP_CellLoadInformation.h RANAP_CellType.h RANAP_CGI.h RANAP_ChosenEncryptionAlgorithm.h RANAP_ChosenIntegrityProtectionAlgorithm.h RANAP_CI.h RANAP_ClassmarkInformation2.h RANAP_ClassmarkInformation3.h RANAP_ClientType.h RANAP_CN-DeactivateTrace.h RANAP_CN-DomainIndicator.h RANAP_CN-ID.h RANAP_CN-InvokeTrace.h RANAP_CNMBMSLinkingInformation.h RANAP_CommonID.h RANAP_Correlation-ID.h RANAP_CriticalityDiagnostics.h RANAP_CriticalityDiagnostics-IE-List.h RANAP_CriticalityDiagnostics-IE-List-Value.h RANAP_Criticality.h RANAP_CSFB-Information.h RANAP_CSG-Id.h RANAP_CSG-Id-List.h RANAP_CSG-Membership-Status.h RANAP_DataPDUType.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_DataVolumeList.h RANAP_DataVolumeList-Value.h RANAP_DataVolumeReference.h RANAP_DataVolumeReport.h RANAP_DataVolumeReportingIndication.h RANAP_DataVolumeReportList.h RANAP_DataVolumeReportRequest.h RANAP_DCH-ID.h RANAP_DeliveryOfErroneousSDU.h RANAP_DeliveryOrder.h RANAP_DeltaRAListofIdleModeUEs.h RANAP_DirectInformationTransfer.h RANAP_DirectReportingIndicator.h RANAP_DirectTransfer.h RANAP_DirectTransfer-IE-ContainerList.h RANAP_DirectTransferInformationItem-RANAP-RelocInf.h RANAP_DL-GTP-PDU-SequenceNumber.h RANAP_DL-N-PDU-SequenceNumber.h RANAP_D-RNTI.h RANAP_DRX-CycleLengthCoefficient.h RANAP_DSCH-ID.h RANAP_EARFCN-Extended.h RANAP_E-DCH-MAC-d-Flow-ID.h RANAP_ENB-ID.h RANAP_EncryptionAlgorithm.h RANAP_EncryptionInformation.h RANAP_EncryptionKey.h RANAP_End-Of-CSFB.h RANAP_EnhancedRelocationCompleteConfirm.h RANAP_EnhancedRelocationCompleteFailure.h RANAP_EnhancedRelocationCompleteRequest.h RANAP_EnhancedRelocationCompleteResponse.h RANAP_EquipmentsToBeTraced.h RANAP_ErrorIndication.h RANAP_EUTRANFrequencies.h RANAP_EUTRANFrequencies-Value.h RANAP_E-UTRAN-Service-Handover.h RANAP_Event1F-Parameters.h RANAP_Event1I-Parameters.h RANAP_Event.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_ExtendedGuaranteedBitrate.h RANAP_ExtendedMaxBitrate.h RANAP_ExtendedRNC-ID.h RANAP_ForwardingIndication.h RANAP_ForwardSRNS-Context.h RANAP_FrameSequenceNumber.h RANAP_FrequenceLayerConvergenceFlag.h RANAP_GA-AltitudeAndDirection.h RANAP_GA-EllipsoidArc.h RANAP_GANSS-PositioningDataSet.h RANAP_GANSS-PositioningMethodAndUsage.h RANAP_GA-Point.h RANAP_GA-PointWithAltitudeAndUncertaintyEllipsoid.h RANAP_GA-PointWithAltitude.h RANAP_GA-PointWithUnCertaintyEllipse.h RANAP_GA-PointWithUnCertainty.h RANAP_GA-Polygon.h RANAP_GA-Polygon-Value.h RANAP_GA-UncertaintyEllipse.h RANAP_GeographicalArea.h RANAP_GeographicalCoordinates.h RANAP_GERAN-BSC-Container.h RANAP_GERAN-Cell-ID.h RANAP_GERAN-Classmark.h RANAP_GERAN-Iumode-RAB-Failed-RABAssgntResponse-Item.h RANAP_GERAN-Iumode-RAB-Failed-RABAssgntResponse-List.h RANAP_GlobalCN-ID.h RANAP_GlobalRNC-ID.h RANAP_GTP-TEI.h RANAP_GuaranteedBitrate.h RANAP_HigherBitratesThan16MbpsFlag.h RANAP_HorizontalSpeedAndBearing.h RANAP_HorizontalVelocity.h RANAP_HorizontalVelocityWithUncertainty.h RANAP_HorizontalWithVerticalVelocityAndUncertainty.h RANAP_HorizontalWithVerticalVelocity.h RANAP_HS-DSCH-MAC-d-Flow-ID.h RANAP_IE-Extensions.h RANAP_IE.h RANAP_IMEIGroup.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_IMEI.h RANAP_IMEIList.h RANAP_IMEISVGroup.h RANAP_IMEISV.h RANAP_IMEISVList.h RANAP_ImmediateMDT.h RANAP_IMSI.h RANAP_IncludeVelocity.h RANAP_InformationExchangeID.h RANAP_InformationExchangeType.h RANAP_InformationRequested.h RANAP_InformationRequestType.h RANAP_InformationTransferConfirmation.h RANAP_InformationTransferFailure.h RANAP_InformationTransferID.h RANAP_InformationTransferIndication.h RANAP_InformationTransferType.h RANAP_InitialUE-Message.h RANAP_InitiatingMessage.h RANAP_IntegrityProtectionAlgorithm.h RANAP_IntegrityProtectionInformation.h RANAP_IntegrityProtectionKey.h RANAP_InterfacesToTraceItem.h RANAP_InterSystemInformationTransferType.h RANAP_InterSystemInformation-TransparentContainer.h RANAP_IPMulticastAddress.h RANAP_IRAT-Measurement-Configuration.h RANAP_IRATmeasurementParameters.h RANAP_Iu-ReleaseCommand.h RANAP_Iu-ReleaseComplete.h RANAP_Iu-ReleaseRequest.h RANAP_IuSigConId-IE-ContainerList.h RANAP_IuSignallingConnectionIdentifier.h RANAP_IuTransportAssociation.h RANAP_JoinedMBMSBearerService-IEs.h RANAP_JoinedMBMSBearerService-IEs-Value.h RANAP_KeyStatus.h RANAP_L3-Information.h RANAP_LABased.h RANAP_LAC.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_LAI.h RANAP_LAI-List.h RANAP_LA-LIST.h RANAP_LA-LIST-Value.h RANAP_LAListofIdleModeUEs.h RANAP_LastKnownServiceArea.h RANAP_LastVisitedUTRANCell-Item.h RANAP_LeftMBMSBearerService-IEs.h RANAP_LeftMBMSBearerService-IEs-Value.h RANAP_LHN-ID.h RANAP_Links-to-log.h RANAP_ListOfInterfacesToTrace.h RANAP_ListOF-SNAs.h RANAP_LoadValue.h RANAP_LocationRelatedDataFailure.h RANAP_LocationRelatedDataRequest.h RANAP_LocationRelatedDataRequestType.h RANAP_LocationRelatedDataRequestTypeSpecificToGERANIuMode.h RANAP_LocationRelatedDataResponse.h RANAP_LocationReport.h RANAP_LocationReportingControl.h RANAP_LocationReportingTransferInformation.h RANAP_LoggedMDT.h RANAP_LoggingDuration.h RANAP_LoggingInterval.h RANAP_M1Report.h RANAP_M2Report.h RANAP_M4-Collection-Parameters.h RANAP_M4-Period.h RANAP_M4Report.h RANAP_M4-Threshold.h RANAP_M5-Period.h RANAP_M5Report.h RANAP_M6-Period.h RANAP_M6Report.h RANAP_M7-Period.h RANAP_M7Report.h RANAP_Management-Based-MDT-Allowed.h RANAP_MaxBitrate.h RANAP_MaxSDU-Size.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_MBMSBearerServiceType.h RANAP_MBMSCNDe-Registration.h RANAP_MBMSCNDe-RegistrationRequest.h RANAP_MBMSCNDe-RegistrationResponse.h RANAP_MBMSCountingInformation.h RANAP_MBMSHCIndicator.h RANAP_MBMSIPMulticastAddressandAPNlist.h RANAP_MBMSIPMulticastAddressandAPNRequest.h RANAP_MBMSLinkingInformation.h RANAP_MBMS-PTP-RAB-ID.h RANAP_MBMSRABEstablishmentIndication.h RANAP_MBMSRABReleaseFailure.h RANAP_MBMSRABRelease.h RANAP_MBMSRABReleaseRequest.h RANAP_MBMSRegistrationFailure.h RANAP_MBMSRegistrationRequest.h RANAP_MBMSRegistrationRequestType.h RANAP_MBMSRegistrationResponse.h RANAP_MBMSServiceArea.h RANAP_MBMSSessionDuration.h RANAP_MBMSSessionIdentity.h RANAP_MBMSSessionRepetitionNumber.h RANAP_MBMSSessionStartFailure.h RANAP_MBMSSessionStart.h RANAP_MBMSSessionStartResponse.h RANAP_MBMSSessionStop.h RANAP_MBMSSessionStopResponse.h RANAP_MBMSSessionUpdateFailure.h RANAP_MBMSSessionUpdate.h RANAP_MBMSSessionUpdateResponse.h RANAP_MBMSSynchronisationInformation.h RANAP_MBMSUELinkingRequest.h RANAP_MBMSUELinkingResponse.h RANAP_MDT-Activation.h RANAP_MDTAreaScope.h RANAP_MDT-Configuration.h RANAP_MDTMode.h RANAP_MDT-PLMN-List.h RANAP_MDT-Report-Parameters.h RANAP_MeasBand.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_MeasurementQuantity.h RANAP_MeasurementsToActivate.h RANAP_MessageStructure.h RANAP_MessageStructure-Value.h RANAP_MSISDN.h RANAP_NAS-PDU.h RANAP_NAS-SequenceNumber.h RANAP_NAS-SynchronisationIndicator.h RANAP_NewBSS-To-OldBSS-Information.h RANAP_NewRAListofIdleModeUEs.h RANAP_NonSearchingIndication.h RANAP_NotEmptyRAListofIdleModeUEs.h RANAP_NRTLoadInformationValue.h RANAP_NumberOfIuInstances.h RANAP_NumberOfSteps.h RANAP_Offload-RAB-Parameters-APN.h RANAP_Offload-RAB-Parameters-ChargingCharacteristics.h RANAP_Offload-RAB-Parameters.h RANAP_OldBSS-ToNewBSS-Information.h RANAP_OMC-ID.h RANAP_Outcome.h RANAP_Out-Of-UTRAN.h RANAP_Overload.h RANAP_PagingAreaID.h RANAP_PagingCause.h RANAP_Paging.h RANAP_PDP-Type-extension.h RANAP_PDP-Type.h RANAP_PDP-TypeInformation-extension.h RANAP_PDP-TypeInformation.h RANAP_PDUType14FrameSequenceNumber.h RANAP_PeriodicLocationInfo.h RANAP_PeriodicReportingIndicator.h RANAP_PermanentNAS-UE-ID.h RANAP_PermittedEncryptionAlgorithms.h RANAP_PermittedIntegrityProtectionAlgorithms.h RANAP_PLMNidentity.h RANAP_PLMNs-in-shared-network.h RANAP_PLMNs-in-shared-network-Value.h RANAP_Port-Number.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_PositionData.h RANAP_PositionDataSpecificToGERANIuMode.h RANAP_PositioningDataDiscriminator.h RANAP_PositioningDataSet.h RANAP_PositioningMethodAndUsage.h RANAP_PositioningPriority.h RANAP_Pre-emptionCapability.h RANAP_Pre-emptionVulnerability.h RANAP_Presence.h RANAP_Priority-Class-Indicator.h RANAP_PriorityLevel.h RANAP_PrivateIE-ID.h RANAP_PrivateMessage.h RANAP_ProcedureCode.h RANAP_ProtocolError-IE-ContainerList.h RANAP_ProtocolExtensionContainer.h RANAP_ProtocolExtensionField.h RANAP_ProtocolExtensionID.h RANAP_ProtocolIE-Container.h RANAP_ProtocolIE-ContainerPair.h RANAP_ProtocolIE-FieldPair.h RANAP_ProtocolIE-ID.h RANAP_ProvidedData.h RANAP_P-TMSI.h RANAP_QueuingAllowed.h RANAP_RABased.h RANAP_RAB-AssignmentRequest.h RANAP_RAB-AssignmentResponse.h RANAP_RAB-AsymmetryIndicator.h RANAP_RAB-ContextItem.h RANAP_RAB-ContextItem-RANAP-RelocInf.h RANAP_RAB-ContextList.h RANAP_RAB-ContextList-RANAP-RelocInf.h RANAP_RAB-DataForwardingItem.h RANAP_RAB-DataForwardingItem-SRNS-CtxReq.h RANAP_RAB-DataForwardingList.h RANAP_RAB-DataForwardingList-SRNS-CtxReq.h RANAP_RABDataVolumeReport.h RANAP_RABDataVolumeReport-Value.h RANAP_RAB-DataVolumeReportItem.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_RAB-DataVolumeReportList.h RANAP_RAB-DataVolumeReportRequestItem.h RANAP_RAB-DataVolumeReportRequestList.h RANAP_RAB-FailedItem-EnhRelocInfoRes.h RANAP_RAB-FailedItem.h RANAP_RAB-FailedList-EnhRelocInfoRes.h RANAP_RAB-FailedList.h RANAP_RAB-ID.h RANAP_RAB-IE-ContainerList.h RANAP_RAB-IE-ContainerPairList.h RANAP_RAB-ModifyItem.h RANAP_RAB-ModifyList.h RANAP_RAB-ModifyRequest.h RANAP_RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_RAB-Parameter-ExtendedMaxBitrateList.h RANAP_RAB-Parameter-GuaranteedBitrateList.h RANAP_RAB-Parameter-MaxBitrateList.h RANAP_RAB-Parameters.h RANAP_RABParametersList.h RANAP_RABParametersList-Value.h RANAP_RAB-QueuedItem.h RANAP_RAB-QueuedList.h RANAP_RAB-ReleasedItem.h RANAP_RAB-ReleasedItem-IuRelComp.h RANAP_RAB-ReleasedList.h RANAP_RAB-ReleasedList-IuRelComp.h RANAP_RAB-ReleaseFailedList.h RANAP_RAB-ReleaseItem.h RANAP_RAB-ReleaseList.h RANAP_RAB-ReleaseRequest.h RANAP_RAB-RelocationReleaseItem.h RANAP_RAB-RelocationReleaseList.h RANAP_RABs-ContextFailedtoTransferItem.h RANAP_RABs-ContextFailedtoTransferList.h RANAP_RAB-SetupItem-EnhancedRelocCompleteReq.h RANAP_RAB-SetupItem-EnhancedRelocCompleteRes.h RANAP_RAB-SetupItem-EnhRelocInfoReq.h RANAP_RAB-SetupItem-EnhRelocInfoRes.h RANAP_RAB-SetupItem-RelocReqAck.h RANAP_RAB-SetupItem-RelocReq.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_RAB-SetupList-EnhancedRelocCompleteReq.h RANAP_RAB-SetupList-EnhancedRelocCompleteRes.h RANAP_RAB-SetupList-EnhRelocInfoReq.h RANAP_RAB-SetupList-EnhRelocInfoRes.h RANAP_RAB-SetupList-RelocReqAck.h RANAP_RAB-SetupList-RelocReq.h RANAP_RAB-SetupOrModifiedItem.h RANAP_RAB-SetupOrModifiedList.h RANAP_RAB-SetupOrModifyItemFirst.h RANAP_RAB-SetupOrModifyItemSecond.h RANAP_RAB-SetupOrModifyList.h RANAP_RABs-failed-to-reportItem.h RANAP_RABs-failed-to-reportList.h RANAP_RAB-SubflowCombinationBitRate.h RANAP_RAB-ToBeReleasedItem-EnhancedRelocCompleteRes.h RANAP_RAB-ToBeReleasedList-EnhancedRelocCompleteRes.h RANAP_RAB-TrCH-Mapping.h RANAP_RAB-TrCH-MappingItem.h RANAP_RAC.h RANAP_RAI.h RANAP_RAI-List.h RANAP_RAListofIdleModeUEs.h RANAP_RAListwithNoIdleModeUEsAnyMore.h RANAP_RANAP-EnhancedRelocationInformationRequest.h RANAP_RANAP-EnhancedRelocationInformationResponse.h RANAP_RANAP-PDU.h RANAP_RANAP-RelocationInformation.h RANAP_RAofIdleModeUEs.h RANAP_RateControlAllowed.h RANAP_RAT-Type.h RANAP_RedirectAttemptFlag.h RANAP_RedirectionCompleted.h RANAP_RedirectionIndication.h RANAP_RejectCauseValue.h RANAP_RelocationCancelAcknowledge.h RANAP_RelocationCancel.h RANAP_RelocationCommand.h RANAP_RelocationComplete.h RANAP_RelocationDetect.h RANAP_RelocationFailure.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_RelocationPreparationFailure.h RANAP_RelocationRequestAcknowledge.h RANAP_RelocationRequest.h RANAP_RelocationRequired.h RANAP_RelocationRequirement.h RANAP_RelocationType.h RANAP_RepetitionNumber0.h RANAP_RepetitionNumber1.h RANAP_ReportAmount.h RANAP_ReportArea.h RANAP_ReportChangeOfSAI.h RANAP_ReportInterval.h RANAP_RequestedGANSSAssistanceData.h RANAP_RequestedGPSAssistanceData.h RANAP_RequestedLocationRelatedDataType.h RANAP_RequestedMBMSIPMulticastAddressandAPNRequest.h RANAP_RequestedMulticastServiceList.h RANAP_Requested-RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_Requested-RAB-Parameter-ExtendedMaxBitrateList.h RANAP_Requested-RAB-Parameter-GuaranteedBitrateList.h RANAP_Requested-RAB-Parameter-MaxBitrateList.h RANAP_Requested-RAB-Parameter-Values.h RANAP_RequestType.h RANAP_ResetAcknowledge.h RANAP_Reset.h RANAP_ResetResourceAckItem.h RANAP_ResetResourceAckList.h RANAP_ResetResourceAcknowledge.h RANAP_ResetResource.h RANAP_ResetResourceItem.h RANAP_ResetResourceList.h RANAP_ResidualBitErrorRatio.h RANAP_ResponseTime.h RANAP_RIMInformation.h RANAP_RIMRoutingAddress.h RANAP_RIM-Transfer.h RANAP_RNC-ID.h RANAP_RNCTraceInformation.h RANAP_RNSAPRelocationParameters.h RANAP_RRC-Container.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_RSRQ-Extension.h RANAP_RSRQ-Type.h RANAP_RSRVCC-HO-Indication.h RANAP_RSRVCC-Information.h RANAP_RSRVCC-Operation-Possible.h RANAP_RTLoadValue.h RANAP_SAC.h RANAP_SAI.h RANAP_SAPI.h RANAP_SDU-ErrorRatio.h RANAP_SDU-FormatInformationParameterItem.h RANAP_SDU-FormatInformationParameters.h RANAP_SDU-ParameterItem.h RANAP_SDU-Parameters.h RANAP_SecurityModeCommand.h RANAP_SecurityModeComplete.h RANAP_SecurityModeReject.h RANAP_Service-Handover.h RANAP_Session-Re-establishment-Indicator.h RANAP_SessionUpdateID.h RANAP_Shared-Network-Information.h RANAP_SignallingIndication.h RANAP_SNA-Access-Information.h RANAP_SNAC.h RANAP_SourceBSS-ToTargetBSS-TransparentContainer.h RANAP_SourceCellID.h RANAP_SourceeNodeB-ToTargeteNodeB-TransparentContainer.h RANAP_SourceID.h RANAP_SourceRNC-ID.h RANAP_SourceRNC-ToTargetRNC-TransparentContainer.h RANAP_SourceStatisticsDescriptor.h RANAP_Source-ToTarget-TransparentContainer.h RANAP_SourceUTRANCellID.h RANAP_SRB-ID.h RANAP_SRB-TrCH-Mapping.h RANAP_SRB-TrCH-MappingItem.h RANAP_SRNS-ContextRequest.h RANAP_SRNS-ContextResponse.h RANAP_SRNS-DataForwardCommand.h RANAP_SRVCC-CSKeysRequest.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_SRVCC-CSKeysResponse.h RANAP_SRVCC-HO-Indication.h RANAP_SRVCC-Information.h RANAP_SRVCC-Operation-Possible.h RANAP_SubflowSDU-Size.h RANAP_SubscriberProfileIDforRFP.h RANAP_SuccessfulOutcome.h RANAP_SupportedBitrate.h RANAP_SupportedRAB-ParameterBitrateList.h RANAP_TAC.h RANAP_TAI.h RANAP_TargetBSS-ToSourceBSS-TransparentContainer.h RANAP_TargetCellId.h RANAP_TargetENB-ID.h RANAP_TargeteNodeB-ToSourceeNodeB-TransparentContainer.h RANAP_TargetID.h RANAP_TargetRNC-ID.h RANAP_TargetRNC-ToSourceRNC-TransparentContainer.h RANAP_Target-ToSource-TransparentContainer.h RANAP_TBCD-STRING.h RANAP_TemporaryUE-ID.h RANAP_TimeToMBMSDataTransfer.h RANAP_Time-UE-StayedInCell-EnhancedGranularity.h RANAP_Time-UE-StayedInCell.h RANAP_TimingDifferenceULDL.h RANAP_TMGI.h RANAP_TMSI.h RANAP_TNLInformationEnhRelInfoReq.h RANAP_TNLInformationEnhRelInfoRes.h RANAP_TraceDepth.h RANAP_TraceInformation.h RANAP_TracePropagationParameters.h RANAP_TraceRecordingSessionInformation.h RANAP_TraceRecordingSessionReference.h RANAP_TraceReference.h RANAP_TraceType.h RANAP_TrafficClass.h RANAP_TrafficHandlingPriority.h RANAP_TransferDelay.h RANAP_TransportLayerAddress.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
 /usr/bin/install -c -m 644 RANAP_TransportLayerInformation.h RANAP_TrCH-ID.h RANAP_TrCH-ID-List.h RANAP_TriggerID.h RANAP_TriggeringMessage.h RANAP_TunnelInformation.h RANAP_TypeOfError.h RANAP_UE-AggregateMaximumBitRateDownlink.h RANAP_UE-AggregateMaximumBitRate.h RANAP_UE-AggregateMaximumBitRateUplink.h RANAP_UE-History-Information.h RANAP_UE-ID.h RANAP_UeRadioCapabilityMatchRequest.h RANAP_UeRadioCapabilityMatchResponse.h RANAP_UESBI-IuA.h RANAP_UESBI-IuB.h RANAP_UESBI-Iu.h RANAP_UESpecificInformationIndication.h RANAP_UL-GTP-PDU-SequenceNumber.h RANAP_UL-N-PDU-SequenceNumber.h RANAP_UnsuccessfulLinking-IEs.h RANAP_UnsuccessfulLinking-IEs-Value.h RANAP_UnsuccessfullyTransmittedDataVolume.h RANAP_UnsuccessfulOutcome.h RANAP_UPInformation.h RANAP_UPInitialisationFrame.h RANAP_UplinkInformationExchangeFailure.h RANAP_UplinkInformationExchangeRequest.h RANAP_UplinkInformationExchangeResponse.h RANAP_UP-ModeVersions.h RANAP_USCH-ID.h RANAP_UserPlaneInformation.h RANAP_UserPlaneMode.h RANAP_UTRAN-CellID.h RANAP_VelocityEstimate.h RANAP_VerticalAccuracyCode.h RANAP_VerticalSpeedDirection.h RANAP_VerticalVelocity.h RANAP_VoiceSupportMatchIndicator.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/ranap'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/ranap'
Making install in rua
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/include/osmocom/rua'
 /usr/bin/install -c -m 644 rua_common.h rua_ies_defs.h rua_msg_factory.h RUA_Ansi-41-IDNNS.h RUA_Cause.h RUA_CauseMisc.h RUA_CauseProtocol.h RUA_CauseRadioNetwork.h RUA_CauseTransport.h RUA_CN-DomainIndicator.h RUA_Connect.h RUA_ConnectionlessTransfer.h RUA_Context-ID.h RUA_CriticalityDiagnostics.h RUA_CriticalityDiagnostics-IE-List.h RUA_CriticalityDiagnostics-IE-List-Value.h RUA_Criticality.h RUA_CSGMembershipStatus.h RUA_DirectTransfer.h RUA_Disconnect.h RUA_ErrorIndication.h RUA_Establishment-Cause.h RUA_Gsm-map-IDNNS.h RUA_IE-Extensions.h RUA_IE.h RUA_InitiatingMessage.h RUA_IntraDomainNasNodeSelector.h RUA_Presence.h RUA_PrivateIE-ID.h RUA_PrivateMessage.h RUA_ProcedureCode.h RUA_ProtocolIE-ID.h RUA_RANAP-Message.h RUA_RoutingParameter.h RUA_RUA-PDU.h RUA_SuccessfulOutcome.h RUA_TriggeringMessage.h RUA_TypeOfError.h RUA_UnsuccessfulOutcome.h '/build/deps/install/stow/osmo-iuh/include/osmocom/rua'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/rua'
Making install in sabp
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
 /usr/bin/install -c -m 644 sabp_ies_defs.h sabp_common.h SABP_InitiatingMessage.h SABP_SABP-PDU.h SABP_SuccessfulOutcome.h SABP_UnsuccessfulOutcome.h SABP_Criticality.h SABP_Presence.h SABP_ProcedureCode.h SABP_ProtocolExtensionID.h SABP_ProtocolIE-ID.h SABP_TriggeringMessage.h SABP_IE-Extensions.h SABP_Available-Bandwidth.h SABP_Broadcast-Message-Content.h SABP_Broadcast-Message-Content-Validity-Indicator.h SABP_Category.h SABP_Cause.h SABP_Criticality-Diagnostics.h SABP_CriticalityDiagnostics-IE-List.h SABP_CriticalityDiagnostics-IE-List-Value.h SABP_MessageStructure.h SABP_MessageStructure-Value.h SABP_Data-Coding-Scheme.h SABP_Failure-List.h SABP_Failure-List-Item.h SABP_Message-Identifier.h SABP_New-Serial-Number.h SABP_Number-of-Broadcasts-Completed-List.h SABP_Number-of-Broadcasts-Completed-List-Item.h SABP_Number-Of-Broadcasts-Completed-Info.h SABP_Number-of-Broadcasts-Requested.h SABP_Old-Serial-Number.h SABP_Paging-ETWS-Indicator.h SABP_Radio-Resource-Loading-List.h SABP_Radio-Resource-Loading-List-Item.h SABP_Recovery-Indication.h SABP_RepetitionNumber0.h SABP_RepetitionNumber1.h SABP_Repetition-Period.h '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
 /usr/bin/install -c -m 644 SABP_Serial-Number.h SABP_Service-Area-Identifier.h SABP_Service-Areas-List.h SABP_TypeOfError.h SABP_WarningSecurityInfo.h SABP_Warning-Type.h SABP_Write-Replace.h SABP_Write-Replace-Complete.h SABP_Write-Replace-Failure.h SABP_Kill.h SABP_Kill-Complete.h SABP_Kill-Failure.h SABP_Load-Query.h SABP_Load-Query-Complete.h SABP_Load-Query-Failure.h SABP_Message-Status-Query.h SABP_Message-Status-Query-Complete.h SABP_Message-Status-Query-Failure.h SABP_Reset.h SABP_Reset-Complete.h SABP_Reset-Failure.h SABP_Restart.h SABP_Failure.h SABP_Error-Indication.h SABP_IE.h '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/sabp'
Making install in iuh
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[3]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[3]: Entering directory '/build/deps/osmo-iuh/include'
make[4]: Entering directory '/build/deps/osmo-iuh/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-iuh/include'
make[3]: Leaving directory '/build/deps/osmo-iuh/include'
make[2]: Leaving directory '/build/deps/osmo-iuh/include'
Making install in doc
make[2]: Entering directory '/build/deps/osmo-iuh/doc'
make[3]: Entering directory '/build/deps/osmo-iuh/doc'
make[4]: Entering directory '/build/deps/osmo-iuh/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-iuh/doc'
make[3]: Leaving directory '/build/deps/osmo-iuh/doc'
make[2]: Leaving directory '/build/deps/osmo-iuh/doc'
Making install in tests
make[2]: Entering directory '/build/deps/osmo-iuh/tests'
make[3]: Entering directory '/build/deps/osmo-iuh/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/osmo-iuh/tests'
make[2]: Leaving directory '/build/deps/osmo-iuh/tests'
make[2]: Entering directory '/build/deps/osmo-iuh'
make[3]: Entering directory '/build/deps/osmo-iuh'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/lib/pkgconfig'
 /usr/bin/install -c -m 644 libosmo-hnbap.pc libosmo-ranap.pc libosmo-rua.pc libosmo-sabp.pc '/build/deps/install/stow/osmo-iuh/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/osmo-iuh'
make[2]: Leaving directory '/build/deps/osmo-iuh'
make[1]: Leaving directory '/build/deps/osmo-iuh'
+ STOW_DIR=/build/deps/install/stow stow --restow osmo-iuh
+ CONFIG=
+ '[' 1 = 1 ']'
+ CONFIG=--enable-manuals
+ set +x



 =============================== osmo-sgsn ===============================

+ cd /build
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:65: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:65: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:65: the top level
configure.ac:116: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:116: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:116: the top level
configure.ac:153: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:153: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:153: the top level
configure.ac:232: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:232: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:232: the top level
configure.ac:234: warning: AC_OUTPUT should be used without arguments.
configure.ac:234: You should run autoupdate.
configure.ac:21: installing './compile'
configure.ac:23: installing './config.guess'
configure.ac:23: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
src/gprs/Makefile.am: installing './depcomp'
tests/gprs/Makefile.am:9: warning: source file '$(top_srcdir)/src/gprs/gprs_utils.c' is in a subdirectory,
tests/gprs/Makefile.am:9: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least one source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However, this
automake: behavior may change in a future Automake major version, with object
automake: files being placed in the same subdirectory as the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
+ ./configure --enable-sanitize --enable-werror --enable-iu --enable-external-tests --enable-manuals
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmo-gsup-client >= 1.8.0... yes
checking for libgtp >= 1.12.0... yes
checking for libosmo-sigtran >= 1.9.0... yes
checking for libasn1c >= 0.9.30... yes
checking for libosmo-ranap >= 1.6.0... yes
checking for libcares... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking whether struct tm has tm_gmtoff member... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/gtphub/Makefile
config.status: creating include/osmocom/sgsn/Makefile
config.status: creating src/Makefile
config.status: creating src/libvlr/Makefile
config.status: creating src/gprs/Makefile
config.status: creating src/sgsn/Makefile
config.status: creating src/gtphub/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/gprs/Makefile
config.status: creating tests/gprs_routing_area/Makefile
config.status: creating tests/sgsn/Makefile
config.status: creating tests/gtphub/Makefile
config.status: creating tests/xid/Makefile
config.status: creating tests/sndcp_xid/Makefile
config.status: creating tests/slhc/Makefile
config.status: creating tests/v42bis/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 12
echo 1.12.0.41-1b546 > .version-t && mv .version-t .version
make  all-recursive
make[1]: Entering directory '/build'
Making all in include
make[2]: Entering directory '/build/include'
Making all in osmocom
make[3]: Entering directory '/build/include/osmocom'
Making all in gtphub
make[4]: Entering directory '/build/include/osmocom/gtphub'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/include/osmocom/gtphub'
Making all in sgsn
make[4]: Entering directory '/build/include/osmocom/sgsn'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/include/osmocom/sgsn'
make[4]: Entering directory '/build/include/osmocom'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/include/osmocom'
make[3]: Leaving directory '/build/include/osmocom'
make[3]: Entering directory '/build/include'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/include'
make[2]: Leaving directory '/build/include'
Making all in src
make[2]: Entering directory '/build/src'
Making all in libvlr
make[3]: Entering directory '/build/src/libvlr'
  CC       vlr.o
  CC       vlr_auth_fsm.o
  CC       vlr_access_req_fsm.o
  CC       vlr_lu_fsm.o
  CC       vlr_sgs.o
  CC       vlr_sgs_fsm.o
  AR       libvlr.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: Leaving directory '/build/src/libvlr'
Making all in gprs
make[3]: Entering directory '/build/src/gprs'
  CC       gprs_llc_parse.lo
  CC       crc24.lo
  CC       gprs_utils.lo
  CC       sgsn_ares.lo
  CCLD     libcommon.la
make[3]: Leaving directory '/build/src/gprs'
Making all in sgsn
make[3]: Entering directory '/build/src/sgsn'
  CC       apn.o
  CC       gprs_gmm_attach.o
  CC       gprs_bssgp.o
  CC       gprs_gmm_fsm.o
  CC       gprs_gmm.o
  CC       gprs_gmm_util.o
  CC       gprs_mm_state_gb_fsm.o
  CC       gprs_ns.o
  CC       gprs_routing_area.o
  CC       gprs_sm.o
  CC       gprs_sndcp.o
  CC       gprs_sndcp_comp.o
  CC       gprs_sndcp_dcomp.o
  CC       gprs_sndcp_pcomp.o
  CC       gprs_sndcp_vty.o
  CC       gprs_sndcp_xid.o
  CC       gtp_ggsn.o
  CC       gtp_mme.o
  CC       sgsn.o
  CC       sgsn_main.o
  CC       sgsn_vty.o
  CC       sgsn_libgtp.o
  CC       gprs_llc.o
  CC       gprs_llc_vty.o
  CC       mmctx.o
  CC       pdpctx.o
  CC       sgsn_ctrl.o
  CC       sgsn_auth.o
  CC       gprs_subscriber.o
  CC       sgsn_cdr.o
  CC       sgsn_rim.o
  CC       slhc.o
  CC       gprs_llc_xid.o
  CC       v42bis.o
  CC       gprs_mm_state_iu_fsm.o
  CC       gprs_ranap.o
gprs_ranap.c: In function 'gsm0408_gprs_rcvmsg_iu':
gprs_ranap.c:274:9: note: '#pragma message: set drop_cipherable arg for gsm0408_rcv_gmm() from IuPS?'
  274 | #pragma message "set drop_cipherable arg for gsm0408_rcv_gmm() from IuPS?"
      |         ^~~~~~~
  CCLD     osmo-sgsn
make[3]: Leaving directory '/build/src/sgsn'
Making all in gtphub
make[3]: Entering directory '/build/src/gtphub'
  CC       gtphub_main.o
  CC       gtphub.o
  CC       gtphub_sock.o
  CC       gtphub_vty.o
  CC       gtphub_ares.o
  CCLD     osmo-gtphub
make[3]: Leaving directory '/build/src/gtphub'
make[3]: Entering directory '/build/src'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making all in contrib
make[2]: Entering directory '/build/contrib'
Making all in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
Making all in tests
make[2]: Entering directory '/build/tests'
Making all in gprs
make[3]: Entering directory '/build/tests/gprs'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/gprs'
Making all in gtphub
make[3]: Entering directory '/build/tests/gtphub'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/gtphub'
Making all in gprs_routing_area
make[3]: Entering directory '/build/tests/gprs_routing_area'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/gprs_routing_area'
Making all in sgsn
make[3]: Entering directory '/build/tests/sgsn'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/sgsn'
Making all in xid
make[3]: Entering directory '/build/tests/xid'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/xid'
Making all in sndcp_xid
make[3]: Entering directory '/build/tests/sndcp_xid'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/sndcp_xid'
Making all in slhc
make[3]: Entering directory '/build/tests/slhc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/slhc'
Making all in v42bis
make[3]: Entering directory '/build/tests/v42bis'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/v42bis'
make[3]: Entering directory '/build/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
Making all in manuals
make[3]: Entering directory '/build/doc/manuals'
ln -s /opt/osmo-gsm-manuals/build build
ln -s /opt/osmo-gsm-manuals/common common
mkdir -p ./vty
xmllint --xinclude --postvalid --noout osmosgsn-vty-reference.xml
if ! [ -f osmosgsn-usermanual.adoc ]; then \
	ln -s osmosgsn-usermanual.adoc osmosgsn-usermanual.adoc; \
fi
../../src/sgsn/osmo-sgsn --vty-ref-xml > vty/sgsn_vty_reference.xml
TEXINPUTS="/opt/osmo-gsm-manuals" \
	a2x -vv -L --asciidoc-opts="-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' " --dblatex-opts="--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 " -a docinfo -a revnumber="DRAFT 1.12.0-41-g1b546" -a revdate="2024-Oct-21" osmosgsn-usermanual.adoc
rate_ctr.c:86 validating counter group 0x55d3081f0a80(sgsn) with 23 counters
Generating the VTY reference in mode 'default' (all commands except deprecated and hidden)
mkdir -p generated
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
	$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" . .) \
	/opt/osmo-gsm-manuals/common/vty_additions.xml \
	./vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.OcZFPF59Kk
+ mktemp
+ combine_src=/tmp/tmp.u0RzIGUDxE
+ cp ./vty/sgsn_vty_reference.xml /tmp/tmp.OcZFPF59Kk
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.OcZFPF59Kk /tmp/tmp.u0RzIGUDxE
+ xsltproc -o /tmp/tmp.OcZFPF59Kk --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.u0RzIGUDxE
asciidoc: reading: /etc/asciidoc/asciidoc.conf
+ [ -n ./vty/sgsn_vty_additions.xml ]
+ realpath ./vty/sgsn_vty_additions.xml
+ addition=/build/doc/manuals/vty/sgsn_vty_additions.xml
+ shift
+ cp /tmp/tmp.OcZFPF59Kk /tmp/tmp.u0RzIGUDxE
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
+ xsltproc -o /tmp/tmp.OcZFPF59Kk --stringparam with /build/doc/manuals/vty/sgsn_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.u0RzIGUDxE
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
+ [ -n  ]
+ cat /tmp/tmp.OcZFPF59Kk
+ rm -f /tmp/tmp.u0RzIGUDxE
+ rm -f /tmp/tmp.OcZFPF59Kk
asciidoc: reading: /build/doc/manuals/osmosgsn-usermanual.adoc
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
	> generated/docbook_vty.xml
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
set -x && \
export GIT_DATE="2024-May-16" && \
export REVNUMBER="DRAFT 1.12.0-41-g1b546" && \
export TEMPFILE="/build/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "osmosgsn-vty-reference.xml" && \
dblatex \
	--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
	--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/generated" \
	 \
	-P draft.mode=no \
	-o osmosgsn-vty-reference.pdf \
	"$TEMPFILE" && \
rm $TEMPFILE
asciidoc: writing: /build/doc/manuals/osmosgsn-usermanual.xml
+ export GIT_DATE=2024-May-16
+ GIT_DATE=2024-May-16
+ export 'REVNUMBER=DRAFT 1.12.0-41-g1b546'
+ REVNUMBER='DRAFT 1.12.0-41-g1b546'
+ export TEMPFILE=/build/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
+ TEMPFILE=/build/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py osmosgsn-vty-reference.xml
asciidoc: osmosgsn-usermanual.adoc: line 5: evaluating: {include:/build/doc/manuals/osmosgsn-usermanual-docinfo.xml}
asciidoc: include: /build/doc/manuals/common/chapters/preface.adoc
asciidoc: osmosgsn-usermanual.adoc: line 8: reading: /build/doc/manuals/common/chapters/preface.adoc
Changing revhistory to DRAFT 1.12.0-41-g1b546, 2024-May-16...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/generated' -P draft.mode=no -o osmosgsn-vty-reference.pdf /build/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
asciidoc: include: /build/doc/manuals/chapters/overview.adoc
asciidoc: osmosgsn-usermanual.adoc: line 10: reading: /build/doc/manuals/chapters/overview.adoc
asciidoc: overview.adoc: line 24: evaluating: {counter2:target-number}
asciidoc: overview.adoc: line 24: evaluating: {set2:target:osmosgsn-usermanual__1.svg}
asciidoc: overview.adoc: line 36: filtering: dot -o "/build/doc/manuals/osmosgsn-usermanual__1.svg" -T svg && echo " "
Build the book set list...
asciidoc: include: /build/doc/manuals/chapters/running.adoc
asciidoc: osmosgsn-usermanual.adoc: line 12: reading: /build/doc/manuals/chapters/running.adoc
asciidoc: include: /build/doc/manuals/chapters/control.adoc
asciidoc: osmosgsn-usermanual.adoc: line 14: reading: /build/doc/manuals/chapters/control.adoc
asciidoc: include: /build/doc/manuals/common/chapters/vty.adoc
asciidoc: osmosgsn-usermanual.adoc: line 16: reading: /build/doc/manuals/common/chapters/vty.adoc
Build the listings...
asciidoc: include: /build/doc/manuals/common/chapters/logging.adoc
asciidoc: osmosgsn-usermanual.adoc: line 18: reading: /build/doc/manuals/common/chapters/logging.adoc
asciidoc: include: /build/doc/manuals/chapters/configuration.adoc
asciidoc: osmosgsn-usermanual.adoc: line 20: reading: /build/doc/manuals/chapters/configuration.adoc
asciidoc: include: /build/doc/manuals/common/chapters/cs7-config.adoc
asciidoc: osmosgsn-usermanual.adoc: line 22: reading: /build/doc/manuals/common/chapters/cs7-config.adoc
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
asciidoc: include: /build/doc/manuals/common/chapters/gb-ns2.adoc
asciidoc: osmosgsn-usermanual.adoc: line 24: reading: /build/doc/manuals/common/chapters/gb-ns2.adoc
Processing stripped document.
asciidoc: include: /build/doc/manuals/common/chapters/gb-ip-sns.msc
asciidoc: gb-ns2.adoc: line 153: reading: /build/doc/manuals/common/chapters/gb-ip-sns.msc
asciidoc: gb-ns2.adoc: line 152: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 152: evaluating: {set2:target:osmosgsn-usermanual__2.svg}
asciidoc: gb-ip-sns.msc: line 38: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__2.svg" -Tsvg -
asciidoc: include: /build/doc/manuals/common/chapters/gb-ns2-nsvc-states-reset-block.dot
asciidoc: gb-ns2.adoc: line 436: reading: /build/doc/manuals/common/chapters/gb-ns2-nsvc-states-reset-block.dot
asciidoc: gb-ns2.adoc: line 435: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 435: evaluating: {set2:target:osmosgsn-usermanual__3.svg}
asciidoc: gb-ns2-nsvc-states-reset-block.dot: line 9: filtering: dot -o "/build/doc/manuals/osmosgsn-usermanual__3.svg" -T svg && echo " "
asciidoc: include: /build/doc/manuals/common/chapters/gb-ns2-nsvc-states-alive.dot
asciidoc: gb-ns2.adoc: line 443: reading: /build/doc/manuals/common/chapters/gb-ns2-nsvc-states-alive.dot
asciidoc: gb-ns2.adoc: line 442: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 442: evaluating: {set2:target:osmosgsn-usermanual__4.svg}
asciidoc: gb-ns2-nsvc-states-alive.dot: line 6: filtering: dot -o "/build/doc/manuals/osmosgsn-usermanual__4.svg" -T svg && echo " "
asciidoc: include: /build/doc/manuals/common/chapters/control_if.adoc
asciidoc: osmosgsn-usermanual.adoc: line 26: reading: /build/doc/manuals/common/chapters/control_if.adoc
asciidoc: control_if.adoc: line 25: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 25: evaluating: {set2:target:osmosgsn-usermanual__5.svg}
asciidoc: control_if.adoc: line 32: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__5.svg" -Tsvg - && echo " "
Build _temp_osmosgsn-vty-reference.pdf
asciidoc: control_if.adoc: line 40: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 40: evaluating: {set2:target:osmosgsn-usermanual__6.svg}
asciidoc: control_if.adoc: line 46: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__6.svg" -Tsvg - && echo " "
asciidoc: control_if.adoc: line 77: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 77: evaluating: {set2:target:osmosgsn-usermanual__7.svg}
asciidoc: control_if.adoc: line 83: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__7.svg" -Tsvg -
asciidoc: control_if.adoc: line 88: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 88: evaluating: {set2:target:osmosgsn-usermanual__8.svg}
asciidoc: control_if.adoc: line 94: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__8.svg" -Tsvg -
asciidoc: control_if.adoc: line 104: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 104: evaluating: {set2:target:osmosgsn-usermanual__9.svg}
asciidoc: control_if.adoc: line 110: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__9.svg" -Tsvg -
asciidoc: control_if.adoc: line 115: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 115: evaluating: {set2:target:osmosgsn-usermanual__10.svg}
asciidoc: control_if.adoc: line 121: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__10.svg" -Tsvg -
asciidoc: control_if.adoc: line 131: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 131: evaluating: {set2:target:osmosgsn-usermanual__11.svg}
asciidoc: control_if.adoc: line 136: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__11.svg" -Tsvg -
asciidoc: include: /build/doc/manuals/common/chapters/oap.adoc
asciidoc: osmosgsn-usermanual.adoc: line 28: reading: /build/doc/manuals/common/chapters/oap.adoc
asciidoc: oap.adoc: line 27: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 27: evaluating: {set2:target:osmosgsn-usermanual__12.svg}
asciidoc: oap.adoc: line 35: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__12.svg" -Tsvg -
asciidoc: oap.adoc: line 40: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 40: evaluating: {set2:target:osmosgsn-usermanual__13.svg}
asciidoc: oap.adoc: line 46: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__13.svg" -Tsvg -
asciidoc: oap.adoc: line 51: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 51: evaluating: {set2:target:osmosgsn-usermanual__14.svg}
asciidoc: oap.adoc: line 61: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__14.svg" -Tsvg -
asciidoc: oap.adoc: line 243: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 243: evaluating: {set2:target:osmosgsn-usermanual__15.svg}
asciidoc: oap.adoc: line 251: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__15.svg" -Tsvg - && echo " "
asciidoc: include: /build/doc/manuals/common/chapters/gsup.adoc
asciidoc: osmosgsn-usermanual.adoc: line 30: reading: /build/doc/manuals/common/chapters/gsup.adoc
asciidoc: gsup.adoc: line 63: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 63: evaluating: {set2:target:osmosgsn-usermanual__16.svg}
asciidoc: gsup.adoc: line 70: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__16.svg" -Tsvg -
asciidoc: gsup.adoc: line 75: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 75: evaluating: {set2:target:osmosgsn-usermanual__17.svg}
asciidoc: gsup.adoc: line 82: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__17.svg" -Tsvg -
asciidoc: gsup.adoc: line 92: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 92: evaluating: {set2:target:osmosgsn-usermanual__18.svg}
asciidoc: gsup.adoc: line 98: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__18.svg" -Tsvg -
asciidoc: gsup.adoc: line 113: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 113: evaluating: {set2:target:osmosgsn-usermanual__19.svg}
asciidoc: gsup.adoc: line 122: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__19.svg" -Tsvg -
asciidoc: gsup.adoc: line 127: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 127: evaluating: {set2:target:osmosgsn-usermanual__20.svg}
asciidoc: gsup.adoc: line 134: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__20.svg" -Tsvg -
asciidoc: gsup.adoc: line 144: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 144: evaluating: {set2:target:osmosgsn-usermanual__21.svg}
asciidoc: gsup.adoc: line 151: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__21.svg" -Tsvg -
asciidoc: gsup.adoc: line 156: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 156: evaluating: {set2:target:osmosgsn-usermanual__22.svg}
asciidoc: gsup.adoc: line 163: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__22.svg" -Tsvg -
asciidoc: gsup.adoc: line 175: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 175: evaluating: {set2:target:osmosgsn-usermanual__23.svg}
asciidoc: gsup.adoc: line 182: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__23.svg" -Tsvg -
asciidoc: gsup.adoc: line 194: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 194: evaluating: {set2:target:osmosgsn-usermanual__24.svg}
asciidoc: gsup.adoc: line 201: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__24.svg" -Tsvg -
asciidoc: gsup.adoc: line 213: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 213: evaluating: {set2:target:osmosgsn-usermanual__25.svg}
asciidoc: gsup.adoc: line 220: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__25.svg" -Tsvg -
asciidoc: gsup.adoc: line 239: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 239: evaluating: {set2:target:osmosgsn-usermanual__26.svg}
asciidoc: gsup.adoc: line 251: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__26.svg" -Tsvg -
asciidoc: gsup.adoc: line 260: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 260: evaluating: {set2:target:osmosgsn-usermanual__27.svg}
asciidoc: gsup.adoc: line 278: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__27.svg" -Tsvg -
asciidoc: gsup.adoc: line 289: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 289: evaluating: {set2:target:osmosgsn-usermanual__28.svg}
asciidoc: gsup.adoc: line 297: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__28.svg" -Tsvg -
asciidoc: gsup.adoc: line 314: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 314: evaluating: {set2:target:osmosgsn-usermanual__29.svg}
asciidoc: gsup.adoc: line 321: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__29.svg" -Tsvg -
asciidoc: gsup.adoc: line 1249: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1249: evaluating: {set2:target:osmosgsn-usermanual__30.svg}
asciidoc: gsup.adoc: line 1261: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__30.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1282: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1282: evaluating: {set2:target:osmosgsn-usermanual__31.svg}
asciidoc: gsup.adoc: line 1291: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__31.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1387: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1387: evaluating: {set2:target:osmosgsn-usermanual__32.svg}
asciidoc: gsup.adoc: line 1396: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__32.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1469: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1469: evaluating: {set2:target:osmosgsn-usermanual__33.svg}
asciidoc: gsup.adoc: line 1477: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__33.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1487: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1487: evaluating: {set2:target:osmosgsn-usermanual__34.svg}
asciidoc: gsup.adoc: line 1500: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__34.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1514: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1514: evaluating: {set2:target:osmosgsn-usermanual__35.svg}
asciidoc: gsup.adoc: line 1529: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__35.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1549: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1549: evaluating: {set2:target:osmosgsn-usermanual__36.svg}
asciidoc: gsup.adoc: line 1558: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__36.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1571: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1571: evaluating: {set2:target:osmosgsn-usermanual__37.svg}
asciidoc: gsup.adoc: line 1578: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__37.svg" -Tsvg - && echo " "
'osmosgsn-vty-reference.pdf' successfully built
+ rm /build/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
asciidoc: gsup.adoc: line 1596: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1596: evaluating: {set2:target:osmosgsn-usermanual__38.svg}
asciidoc: gsup.adoc: line 1611: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__38.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1679: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1679: evaluating: {set2:target:osmosgsn-usermanual__39.svg}
asciidoc: gsup.adoc: line 1688: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/doc/manuals/osmosgsn-usermanual__39.svg" -Tsvg -
asciidoc: gsup.adoc: line 1711: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1711: evaluating: {set2:target:osmosgsn-usermanual__40.svg}
asciidoc: gsup.adoc: line 1721: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__40.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1846: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1846: evaluating: {set2:target:osmosgsn-usermanual__41.svg}
asciidoc: gsup.adoc: line 1854: filtering: packetdiag3 -o "/build/doc/manuals/osmosgsn-usermanual__41.svg" -Tsvg - && echo " "
asciidoc: include: /build/doc/manuals/chapters/counters.adoc
asciidoc: osmosgsn-usermanual.adoc: line 32: reading: /build/doc/manuals/chapters/counters.adoc
asciidoc: include: /build/doc/manuals/chapters/counters_generated.adoc
asciidoc: counters.adoc: line 4: reading: /build/doc/manuals/chapters/counters_generated.adoc
asciidoc: include: /build/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmosgsn-usermanual.adoc: line 34: reading: /build/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/doc/manuals/common/chapters/bibliography.adoc
asciidoc: osmosgsn-usermanual.adoc: line 36: reading: /build/doc/manuals/common/chapters/bibliography.adoc
asciidoc: include: /build/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmosgsn-usermanual.adoc: line 38: reading: /build/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmosgsn-usermanual.adoc: line 40: reading: /build/doc/manuals/common/chapters/gfdl.adoc
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 1.12.0-41-g1b546', '-a', 'revdate=2024-Oct-21', 'osmosgsn-usermanual.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 1.12.0-41-g1b546'), ('--attribute', 'revdate=2024-Oct-21'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/doc/manuals/osmosgsn-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0  -V  "/build/doc/manuals/osmosgsn-usermanual.xml"

Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/doc/manuals/osmosgsn-usermanual.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/doc/manuals/osmosgsn-usermanual.xml
xsltproc -o osmosgsn-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmpagkxjne9/listings.xml' --param current.dir '/build/doc/manuals' /tmp/tmpagkxjne9/custom.xsl /build/doc/manuals/osmosgsn-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: gsup-msg-purge-ms-reqs.
XRef to nonexistent id: gsup-msg-purge-ms-reqs
Error: no ID for constraint linkend: gsup-ie-pdptaddress.
XRef to nonexistent id: gsup-ie-pdptaddress
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:in.
XRef to nonexistent id: bssgp:bss_ctx_packets:in
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:out.
XRef to nonexistent id: bssgp:bss_ctx_packets:out
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:in.
XRef to nonexistent id: bssgp:bss_ctx_bytes:in
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:out.
XRef to nonexistent id: bssgp:bss_ctx_bytes:out
Error: no ID for constraint linkend: bssgp:bss_ctx_blocked.
XRef to nonexistent id: bssgp:bss_ctx_blocked
Error: no ID for constraint linkend: bssgp:bss_ctx_discarded.
XRef to nonexistent id: bssgp:bss_ctx_discarded
Error: no ID for constraint linkend: bssgp:bss_ctx_status.
XRef to nonexistent id: bssgp:bss_ctx_status
Error: no ID for constraint linkend: sgsn_llc:dl_bytes.
XRef to nonexistent id: sgsn_llc:dl_bytes
Error: no ID for constraint linkend: sgsn_llc:ul_bytes.
XRef to nonexistent id: sgsn_llc:ul_bytes
Error: no ID for constraint linkend: sgsn_llc:dl_packets.
XRef to nonexistent id: sgsn_llc:dl_packets
Error: no ID for constraint linkend: sgsn_llc:ul_packets.
XRef to nonexistent id: sgsn_llc:ul_packets
Error: no ID for constraint linkend: sgsn_gprs:attach_requested.
XRef to nonexistent id: sgsn_gprs:attach_requested
Error: no ID for constraint linkend: sgsn_gprs:attach_accepted.
XRef to nonexistent id: sgsn_gprs:attach_accepted
Error: no ID for constraint linkend: sgsn_gprs:attach_rejected.
XRef to nonexistent id: sgsn_gprs:attach_rejected
Error: no ID for constraint linkend: sgsn_gprs:detach_requested.
XRef to nonexistent id: sgsn_gprs:detach_requested
Error: no ID for constraint linkend: sgsn_gprs:detach_acked.
XRef to nonexistent id: sgsn_gprs:detach_acked
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_pdp:activate_requested.
XRef to nonexistent id: sgsn_pdp:activate_requested
Error: no ID for constraint linkend: sgsn_pdp:activate_rejected.
XRef to nonexistent id: sgsn_pdp:activate_rejected
Error: no ID for constraint linkend: sgsn_pdp:activate_accepted.
XRef to nonexistent id: sgsn_pdp:activate_accepted
Error: no ID for constraint linkend: sgsn_pdp:request_activated.
XRef to nonexistent id: sgsn_pdp:request_activated
Error: no ID for constraint linkend: sgsn_pdp:request_activate_rejected.
XRef to nonexistent id: sgsn_pdp:request_activate_rejected
Error: no ID for constraint linkend: sgsn_pdp:modify_requested.
XRef to nonexistent id: sgsn_pdp:modify_requested
Error: no ID for constraint linkend: sgsn_pdp:modify_accepted.
XRef to nonexistent id: sgsn_pdp:modify_accepted
Error: no ID for constraint linkend: sgsn_pdp:dl_deactivate_requested.
XRef to nonexistent id: sgsn_pdp:dl_deactivate_requested
Error: no ID for constraint linkend: sgsn_pdp:dl_deactivate_accepted.
XRef to nonexistent id: sgsn_pdp:dl_deactivate_accepted
Error: no ID for constraint linkend: sgsn_pdp:ul_deactivate_requested.
XRef to nonexistent id: sgsn_pdp:ul_deactivate_requested
Error: no ID for constraint linkend: sgsn_pdp:ul_deactivate_accepted.
XRef to nonexistent id: sgsn_pdp:ul_deactivate_accepted
Error: no ID for constraint linkend: ns:nsvc_packets:in.
XRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/doc/manuals/osmosgsn-usermanual__1.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig1.pdf /build/doc/manuals/osmosgsn-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/doc/manuals/osmosgsn-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/doc/manuals/osmosgsn-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/doc/manuals/osmosgsn-usermanual__5.svg
rsvg-convert -a -f pdf -o fig5.pdf /build/doc/manuals/osmosgsn-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/doc/manuals/osmosgsn-usermanual__7.svg
rsvg-convert -a -f pdf -o fig7.pdf /build/doc/manuals/osmosgsn-usermanual__8.svg
rsvg-convert -a -f pdf -o fig8.pdf /build/doc/manuals/osmosgsn-usermanual__9.svg
rsvg-convert -a -f pdf -o fig9.pdf /build/doc/manuals/osmosgsn-usermanual__10.svg
rsvg-convert -a -f pdf -o fig10.pdf /build/doc/manuals/osmosgsn-usermanual__11.svg
rsvg-convert -a -f pdf -o fig11.pdf /build/doc/manuals/osmosgsn-usermanual__12.svg
rsvg-convert -a -f pdf -o fig12.pdf /build/doc/manuals/osmosgsn-usermanual__13.svg
rsvg-convert -a -f pdf -o fig13.pdf /build/doc/manuals/osmosgsn-usermanual__14.svg
rsvg-convert -a -f pdf -o fig14.pdf /build/doc/manuals/osmosgsn-usermanual__15.svg
rsvg-convert -a -f pdf -o fig15.pdf /build/doc/manuals/osmosgsn-usermanual__16.svg
rsvg-convert -a -f pdf -o fig16.pdf /build/doc/manuals/osmosgsn-usermanual__17.svg
rsvg-convert -a -f pdf -o fig17.pdf /build/doc/manuals/osmosgsn-usermanual__18.svg
rsvg-convert -a -f pdf -o fig18.pdf /build/doc/manuals/osmosgsn-usermanual__19.svg
rsvg-convert -a -f pdf -o fig19.pdf /build/doc/manuals/osmosgsn-usermanual__20.svg
rsvg-convert -a -f pdf -o fig20.pdf /build/doc/manuals/osmosgsn-usermanual__21.svg
rsvg-convert -a -f pdf -o fig21.pdf /build/doc/manuals/osmosgsn-usermanual__22.svg
rsvg-convert -a -f pdf -o fig22.pdf /build/doc/manuals/osmosgsn-usermanual__23.svg
rsvg-convert -a -f pdf -o fig23.pdf /build/doc/manuals/osmosgsn-usermanual__24.svg
rsvg-convert -a -f pdf -o fig24.pdf /build/doc/manuals/osmosgsn-usermanual__25.svg
rsvg-convert -a -f pdf -o fig25.pdf /build/doc/manuals/osmosgsn-usermanual__26.svg
rsvg-convert -a -f pdf -o fig26.pdf /build/doc/manuals/osmosgsn-usermanual__27.svg
rsvg-convert -a -f pdf -o fig27.pdf /build/doc/manuals/osmosgsn-usermanual__28.svg
rsvg-convert -a -f pdf -o fig28.pdf /build/doc/manuals/osmosgsn-usermanual__29.svg
rsvg-convert -a -f pdf -o fig29.pdf /build/doc/manuals/osmosgsn-usermanual__30.svg
rsvg-convert -a -f pdf -o fig30.pdf /build/doc/manuals/osmosgsn-usermanual__31.svg
rsvg-convert -a -f pdf -o fig31.pdf /build/doc/manuals/osmosgsn-usermanual__32.svg
rsvg-convert -a -f pdf -o fig32.pdf /build/doc/manuals/osmosgsn-usermanual__33.svg
rsvg-convert -a -f pdf -o fig33.pdf /build/doc/manuals/osmosgsn-usermanual__34.svg
rsvg-convert -a -f pdf -o fig34.pdf /build/doc/manuals/osmosgsn-usermanual__35.svg
rsvg-convert -a -f pdf -o fig35.pdf /build/doc/manuals/osmosgsn-usermanual__36.svg
rsvg-convert -a -f pdf -o fig36.pdf /build/doc/manuals/osmosgsn-usermanual__37.svg
rsvg-convert -a -f pdf -o fig37.pdf /build/doc/manuals/osmosgsn-usermanual__38.svg
rsvg-convert -a -f pdf -o fig38.pdf /build/doc/manuals/osmosgsn-usermanual__39.svg
rsvg-convert -a -f pdf -o fig39.pdf /build/doc/manuals/osmosgsn-usermanual__40.svg
rsvg-convert -a -f pdf -o fig40.pdf /build/doc/manuals/osmosgsn-usermanual__41.svg
Build osmosgsn-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmosgsn-usermanual.tex

kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 1+0/600 --dpi 600 tctt0900
mktexpk: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1+0/600; nonstopmode; input tctt0900
This is METAFONT, Version 2.71828182 (TeX Live 2022/Debian) (preloaded base=mf)

(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/tctt0900.mf
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/exbase.mf)
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/tctt.mf
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txsymb.mf
 Ok (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/exaccess.mf
 Ok) (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txpseudo.mf
 Ok) (/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txaccent.mf
 Ok [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [27] [29])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txgen.mf
 Ok [100] [109] [98] [99] [108])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txsymbol.mf
 Ok [13] [18] [21] [22] [23] [24] [25] [26] [28] [31] [32] [36] [39] [44]
[45] [46] [42] [47] [60] [61] [62] [77] [79] [87] [110] [91] [93] [94] [95]
[96] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137]
[138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149]
[150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161]
[162] [163] [164] [165] [166] [167] [168] [169] [171] [172] [173] [174]
[175] [177] [176] [180] [181] [182] [183] [184] [187] [191] [214] [246])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txromod.mf
 Ok [48] [49] [50] [51] [52] [53] [54] [55] [56] [57])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txrsuper.mf
 Ok [185] [178] [179] [170] [186])
(/usr/share/texlive/texmf-dist/fonts/source/jknappen/ec/txrfract.mf
 Ok [188] [189] [190]) ) ) )
Font metrics written on tctt0900.tfm.
Output written on tctt0900.600gf (128 characters, 17564 bytes).
Transcript written on tctt0900.log.
mktexpk: /build/.texlive2022/texmf-var/fonts/pk/ljfour/jknappen/ec/tctt0900.600pk: successfully generated.
running post-compilation scripts...
[index] the index file /tmp/tmpagkxjne9/osmosgsn-usermanual.idx is empty
osmosgsn-usermanual.aux MD5 checksum changed
osmosgsn-usermanual.toc MD5 checksum changed
the /tmp/tmpagkxjne9/osmosgsn-usermanual.aux file has changed
pdflatex -interaction=batchmode osmosgsn-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpagkxjne9/osmosgsn-usermanual.idx is empty
osmosgsn-usermanual.aux MD5 checksum changed
the /tmp/tmpagkxjne9/osmosgsn-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmosgsn-usermanual.pdf' successfully built

a2x: deleting /build/doc/manuals/osmosgsn-usermanual.xml
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ make check
make  check-recursive
make[1]: Entering directory '/build'
Making check in include
make[2]: Entering directory '/build/include'
Making check in osmocom
make[3]: Entering directory '/build/include/osmocom'
Making check in gtphub
make[4]: Entering directory '/build/include/osmocom/gtphub'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/include/osmocom/gtphub'
Making check in sgsn
make[4]: Entering directory '/build/include/osmocom/sgsn'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/include/osmocom/sgsn'
make[4]: Entering directory '/build/include/osmocom'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/include/osmocom'
make[3]: Leaving directory '/build/include/osmocom'
make[3]: Entering directory '/build/include'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/include'
make[2]: Leaving directory '/build/include'
Making check in src
make[2]: Entering directory '/build/src'
Making check in libvlr
make[3]: Entering directory '/build/src/libvlr'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/libvlr'
Making check in gprs
make[3]: Entering directory '/build/src/gprs'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/gprs'
Making check in sgsn
make[3]: Entering directory '/build/src/sgsn'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/sgsn'
Making check in gtphub
make[3]: Entering directory '/build/src/gtphub'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/gtphub'
make[3]: Entering directory '/build/src'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making check in contrib
make[2]: Entering directory '/build/contrib'
Making check in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
Making check in tests
make[2]: Entering directory '/build/tests'
Making check in gprs
make[3]: Entering directory '/build/tests/gprs'
make  gprs_test
make[4]: Entering directory '/build/tests/gprs'
  CC       gprs_test.o
  CC       gprs_utils.o
  CCLD     gprs_test
make[4]: Leaving directory '/build/tests/gprs'
make[3]: Leaving directory '/build/tests/gprs'
Making check in gtphub
make[3]: Entering directory '/build/tests/gtphub'
make  gtphub_test
make[4]: Entering directory '/build/tests/gtphub'
  CC       gtphub_test.o
  CCLD     gtphub_test
make[4]: Leaving directory '/build/tests/gtphub'
make[3]: Leaving directory '/build/tests/gtphub'
Making check in gprs_routing_area
make[3]: Entering directory '/build/tests/gprs_routing_area'
make  gprs_routing_area_test
make[4]: Entering directory '/build/tests/gprs_routing_area'
  CC       gprs_routing_area_test.o
  CCLD     gprs_routing_area_test
make[4]: Leaving directory '/build/tests/gprs_routing_area'
make[3]: Leaving directory '/build/tests/gprs_routing_area'
Making check in sgsn
make[3]: Entering directory '/build/tests/sgsn'
make  sgsn_test
make[4]: Entering directory '/build/tests/sgsn'
  CC       sgsn_test.o
  CC       gprs_gb_parse.o
  CCLD     sgsn_test
make[4]: Leaving directory '/build/tests/sgsn'
make[3]: Leaving directory '/build/tests/sgsn'
Making check in xid
make[3]: Entering directory '/build/tests/xid'
make  xid_test
make[4]: Entering directory '/build/tests/xid'
  CC       xid_test.o
  CCLD     xid_test
make[4]: Leaving directory '/build/tests/xid'
make[3]: Leaving directory '/build/tests/xid'
Making check in sndcp_xid
make[3]: Entering directory '/build/tests/sndcp_xid'
make  sndcp_xid_test
make[4]: Entering directory '/build/tests/sndcp_xid'
  CC       sndcp_xid_test.o
  CCLD     sndcp_xid_test
make[4]: Leaving directory '/build/tests/sndcp_xid'
make[3]: Leaving directory '/build/tests/sndcp_xid'
Making check in slhc
make[3]: Entering directory '/build/tests/slhc'
make  slhc_test
make[4]: Entering directory '/build/tests/slhc'
  CC       slhc_test.o
  CCLD     slhc_test
make[4]: Leaving directory '/build/tests/slhc'
make[3]: Leaving directory '/build/tests/slhc'
Making check in v42bis
make[3]: Entering directory '/build/tests/v42bis'
make  v42bis_test
make[4]: Entering directory '/build/tests/v42bis'
  CC       v42bis_test.o
  CCLD     v42bis_test
make[4]: Leaving directory '/build/tests/v42bis'
make[3]: Leaving directory '/build/tests/v42bis'
make[3]: Entering directory '/build/tests'
make  check-local
make[4]: Entering directory '/build/tests'
:;{ \
               echo '# Signature of the current package.' && \
               echo 'm4_define([AT_PACKAGE_NAME],' && \
               echo '  [osmo-sgsn])' && \
               echo 'm4_define([AT_PACKAGE_TARNAME],' && \
               echo '  [osmo-sgsn])' && \
               echo 'm4_define([AT_PACKAGE_VERSION],' && \
               echo '  [1.12.0.41-1b546])' && \
               echo 'm4_define([AT_PACKAGE_STRING],' && \
               echo '  [osmo-sgsn 1.12.0.41-1b546])' && \
               echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
               echo '  [osmocom-net-gprs@lists.osmocom.org])'; \
               echo 'm4_define([AT_PACKAGE_URL],' && \
               echo '  [])'; \
             } >'./package.m4'
/bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at
mv testsuite.tmp testsuite
/bin/bash './testsuite' 
## ------------------------------------- ##
## osmo-sgsn 1.12.0.41-1b546 test suite. ##
## ------------------------------------- ##

Regression tests.

  1: gprs                                            ok
  2: sgsn                                            ok
  3: gprs_routing_area                               ok
  4: gtphub                                          ok
  5: xid                                             ok
  6: sndcp_xid                                       ok
  7: slhc                                            ok
  8: v42bis                                          ok

## ------------- ##
## Test results. ##
## ------------- ##

All 8 tests were successful.
make  python-tests
make[5]: Entering directory '/build/tests'
make vty-test
make[6]: Entering directory '/build/tests'
make vty-python-test
make[7]: Entering directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY.test_history) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/osmo-sgsn.cfg'

> ls -l /proc/111413/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111413 54.5  0.0  27992 23300 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     111414 50.0  0.0 21475163140 26120 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg
build     111421  0.0  0.0   2576   880 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111423  0.0  0.0   3700  1800 ?        S    21:35   0:00 grep osmo

ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38258), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38258), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg from /build
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/osmo-sgsn.cfg'

> ls -l /proc/111413/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111413  3.8  0.0  27992 23300 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     111425 50.0  0.0 21475163140 26128 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg
build     111432  0.0  0.0   2576   916 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111434  0.0  0.0   3700  1876 ?        S    21:35   0:00 grep osmo

ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38268), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38268), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg from /build
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/osmo-sgsn.cfg'

> ls -l /proc/111413/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111413  1.9  0.0  27992 23300 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     111436 50.0  0.0 21475163140 26264 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg
build     111443  0.0  0.0   2576   936 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111445  0.0  0.0   3700  1796 ?        S    21:35   0:00 grep osmo

ok

----------------------------------------------------------------------
Ran 3 tests in 4.369s

OK
Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38276), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38276), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
osmotestconfig.py -p /build -w /build -v
Warning: doc/examples/osmo-sgsn/osmo-sgsn.cfg is not being tested
Warning: doc/examples/osmo-sgsn/osmo-sgsn_custom-sccp.cfg is not being tested
Warning: doc/examples/osmo-sgsn/osmo-sgsn-accept-all.cfg is not being tested
Warning: doc/examples/osmo-gtphub/osmo-gtphub.cfg is not being tested
Verifying src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build 'src/sgsn/osmo-sgsn' '-c' '/build/tests/osmo-sgsn.cfg'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111447 60.0  0.0  28084 23432 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111448 66.6  0.0 21475163140 26260 ?   S    21:35   0:00 src/sgsn/osmo-sgsn -c /build/tests/osmo-sgsn.cfg
build     111455  0.0  0.0   2576   896 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111457  0.0  0.0   3700  1776 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42294), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42294), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfgszvxdvj2, test write_config
Launching: PWD=/build 'src/sgsn/osmo-sgsn' '-c' '/build/writtenconfig/osmo-sgsn.cfgszvxdvj2'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111447  4.4  0.0  28028 23936 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111459 25.0  0.0 21475163140 26320 ?   S    21:35   0:00 src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfgszvxdvj2
build     111466  0.0  0.0   2576   876 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111468  0.0  0.0   3700  1812 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42310), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42310), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfgszvxdvj2, test token_vty_command
Launching: PWD=/build 'src/sgsn/osmo-sgsn' '-c' '/build/writtenconfig/osmo-sgsn.cfgszvxdvj2'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111447  2.3  0.0  28028 23936 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111470 25.0  0.0 21475163140 25960 ?   S    21:35   0:00 src/sgsn/osmo-sgsn -c /build/writtenconfig/osmo-sgsn.cfgszvxdvj2
build     111477  0.0  0.0   2576   904 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111479  0.0  0.0   3700  1788 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42324), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42324), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg, test verify_doc
Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4253      0.0.0.0:*          


> ps xua | grep osmo
build     111447  1.5  0.0  28028 23936 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111481  0.0  0.0 21474888964 14228 ?   S    21:35   0:00 src/gtphub/osmo-gtphub -c /build/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg
build     111488  0.0  0.0   2576   892 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111490  0.0  0.0   3700  1972 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37694), raddr=('127.0.0.1', 4253)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37694), raddr=('127.0.0.1', 4253)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j, test write_config
Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4253      0.0.0.0:*          


> ps xua | grep osmo
build     111447  1.1  0.0  28180 23936 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111492  0.0  0.0 21474888964 14208 ?   S    21:35   0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j
build     111499  0.0  0.0   2576   932 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111501  0.0  0.0   3700  1808 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37702), raddr=('127.0.0.1', 4253)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37702), raddr=('127.0.0.1', 4253)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j, test token_vty_command
Launching: PWD=/build 'src/gtphub/osmo-gtphub' '-c' '/build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j'

> ls -l /proc/111447/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4253      0.0.0.0:*          


> ps xua | grep osmo
build     111447  0.9  0.0  28180 23936 ?        S    21:35   0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build     111503  0.0  0.0 21474888964 14232 ?   S    21:35   0:00 src/gtphub/osmo-gtphub -c /build/writtenconfig/osmo-gtphub-1iface.cfg19l19z4j
build     111510  0.0  0.0   2576   896 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111512  0.0  0.0   3700  1820 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37708), raddr=('127.0.0.1', 4253)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37708), raddr=('127.0.0.1', 4253)> (0 sockets open)
./vty_test_runner.py -w /build -v
confpath /build/tests/.., workdir /build
Running tests for specific VTY commands
testVtyAuth (__main__.TestVTYSGSN.testVtyAuth) ... Opening /dev/null
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111515 25.0  0.0 21475163140 26136 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111522  0.0  0.0   2576   896 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111524  0.0  0.0   3700  1756 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42338), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42338), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyCDR (__main__.TestVTYSGSN.testVtyCDR) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111526 25.0  0.0 21475163140 25776 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111533  0.0  0.0   2576   948 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111535  0.0  0.0   3700  1800 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43994), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43994), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyEasyAPN (__main__.TestVTYSGSN.testVtyEasyAPN) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111537 50.0  0.0 21475163140 25504 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111544  0.0  0.0   2576   884 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111546  0.0  0.0   3700  1860 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44010), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44010), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyGgsn (__main__.TestVTYSGSN.testVtyGgsn) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111548 50.0  0.0 21475163140 27480 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111555  0.0  0.0   2576   944 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111557  0.0  0.0   3700  1972 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44026), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44026), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyShow (__main__.TestVTYSGSN.testVtyShow) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111559 50.0  0.0 21475163140 25584 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111566  0.0  0.0   2576   924 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111568  0.0  0.0   3700  1852 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44034), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44034), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtySubscriber (__main__.TestVTYSGSN.testVtySubscriber) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111570 25.0  0.0 21475163140 25920 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111577  0.0  0.0   2576   912 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111579  0.0  0.0   3700  1892 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44048), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44048), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyTimers (__main__.TestVTYSGSN.testVtyTimers) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111581 25.0  0.0 21475163140 25980 ?   S    21:35   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111588  0.0  0.0   2576   952 ?        S    21:35   0:00 /bin/sh -c ps xua | grep osmo
build     111590  0.0  0.0   3700  1976 ?        S    21:35   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44060), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44060), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyTree (__main__.TestVTYSGSN.testVtyTree) ... Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn-accept-all.cfg'

> ls -l /proc/111514/fd
total 0
lr-x------ 1 build build 64 Feb 16 21:35 0 -> pipe:[3866074086]
l-wx------ 1 build build 64 Feb 16 21:35 1 -> pipe:[3866074087]
l-wx------ 1 build build 64 Feb 16 21:35 2 -> pipe:[3866074088]
l-wx------ 1 build build 64 Feb 16 21:35 3 -> /dev/null


> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess


> ss -tln
State  Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0      10         127.0.0.1:4245      0.0.0.0:*          


> ps xua | grep osmo
build     111592 33.3  0.0 21475163140 27916 ?   S    21:36   0:00 ./src/sgsn/osmo-sgsn -c /build/tests/../tests/osmo-sgsn-accept-all.cfg
build     111599  0.0  0.0   2576   928 ?        S    21:36   0:00 /bin/sh -c ps xua | grep osmo
build     111601  0.0  0.0   3700  1896 ?        S    21:36   0:00 grep osmo

Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44066), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44066), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok

----------------------------------------------------------------------
Ran 8 tests in 11.649s

OK
rm -f ../gsn_restart ../gtphub_restart_count
make[7]: Leaving directory '/build/tests'
make vty-transcript-test
make[7]: Entering directory '/build/tests'
osmo_verify_transcript_vty.py -v \
	-n OsmoSGSN -p 4245 \
	-r "../src/sgsn/osmo-sgsn -c ../tests/osmo-sgsn.cfg" \
	 ${T:-./osmo-sgsn*.vty}
rate_ctr.c:86 validating counter group 0x5579ffaa4a80(sgsn) with 23 counters
DLGLOBAL NOTICE Available via telnet 127.0.0.1 4245 (telnet_interface.c:88)
DLGTP NOTICE GTP: gtp_newgsn() started at 127.0.0.1 (gsn.c:468)
DLGTP NOTICE State information file (.//gsn_restart) not found. Creating new file. (gsn.c:389)
DGPRS NOTICE Created GTP on 127.0.0.1 (sgsn_libgtp.c:970)
DGPRS NOTICE libGTP v1.13.0 initialized (sgsn_main.c:463)
DLCTRL NOTICE CTRL at 127.0.0.1 4251 (control_if.c:1026)
DLGSUP NOTICE GSUP connecting to 127.0.0.1:4222 (gsup_client.c:77)
DLSCCP NOTICE OsmoSGSN: Creating SS7 instance (sccp_user.c:545)
DLSCCP NOTICE OsmoSGSN: Using SS7 instance 0, pc:0.23.4 (sccp_user.c:572)
DLSCCP NOTICE OsmoSGSN: Creating AS instance (sccp_user.c:579)
DLSCCP NOTICE OsmoSGSN: Using AS instance as-clnt-OsmoSGSN (sccp_user.c:590)
DLSCCP NOTICE OsmoSGSN: Creating default route (sccp_user.c:596)
DLSCCP NOTICE OsmoSGSN: No unassociated ASP for m3ua, creating new ASP asp-clnt-OsmoSGSN (sccp_user.c:635)
DLSCCP NOTICE OsmoSGSN: Using ASP instance asp-clnt-OsmoSGSN (sccp_user.c:705)
DLSS7 NOTICE 0: Creating SCCP instance (osmo_ss7_instance.c:158)
DLINP ERROR CLICONN(asp-clnt-OsmoSGSN,){CONNECTING} connect failed (-111) (stream_cli.c:423)
Launching: cd '/build/tests'; ../src/sgsn/osmo-sgsn -c ../tests/osmo-sgsn.cfg
OsmoSGSN> enable

OsmoSGSN# show timer
T3312 = 600 s	Periodic RA Update timer (s) (default: 600 s)
T3313 = 30 s	Waiting for paging response timer (s) (default: 30 s)
T3314 = 44 s	READY timer. Force to STANDBY on expiry timer (s) (default: 44 s)
T3316 = 44 s	AA-Ready timer (s) (default: 44 s)
T3322 = 6 s	Detach request -> accept timer (s) (default: 6 s)
T3350 = 6 s	Waiting for ATT/RAU/TMSI_COMPL timer (s) (default: 6 s)
T3360 = 6 s	Waiting for AUTH/CIPH response timer (s) (default: 6 s)
T3370 = 6 s	Waiting for IDENTITY response timer (s) (default: 6 s)
T3385 = 8 s	Wait for ACT PDP CTX REQ timer (s) (default: 8 s)
T3386 = 8 s	Wait for MODIFY PDP CTX ACK timer (s) (default: 8 s)
T3395 = 8 s	Wait for DEACT PDP CTX ACK timer (s) (default: 8 s)
T3397 = 8 s	Wait for DEACT AA PDP CTX ACK timer (s) (default: 8 s)
X1001 = 5 s	RANAP Release timeout. Wait for RANAP Release Complete.On expiry release Iu connection (s) (default: 5 s)
OsmoSGSN# configure terminal

OsmoSGSN(config)# list
  help
  list [with-flags]
  show vty-attributes
  show vty-attributes (application|library|global)
  write terminal
  write file [PATH]
  write memory
  write
  show running-config
  exit
  end
  hostname WORD
  no hostname [HOSTNAME]
  password (8|) WORD
  password LINE
  enable password (8|) WORD
  enable password LINE
  no enable password
  banner motd default
  banner motd file [FILE]
  no banner motd
  service terminal-length <0-512>
  no service terminal-length [<0-512>]
  line vty
  service advanced-vty
  no service advanced-vty
  show history
  log stderr [blocking-io]
  no log stderr
  log file FILENAME [blocking-io]
  no log file FILENAME
  log alarms <2-32700>
  no log alarms
  log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
  log syslog local <0-7>
  no log syslog
  log systemd-journal [raw]
  no log systemd-journal
  log gsmtap [HOSTNAME]
  no log gsmtap [HOSTNAME]
  stats reporter statsd [NAME]
  no stats reporter statsd [NAME]
  stats reporter log [NAME]
  no stats reporter log [NAME]
  stats interval <0-65535>
  stats-tcp interval <0-65535>
  stats-tcp batch-size <1-65535>
  sgsn
  ctrl
  cpu-sched
  cs7 instance <0-15>
  ns
  bssgp

OsmoSGSN(config)# sgsn

OsmoSGSN(config-sgsn)# list
  help
  list [with-flags]
  show vty-attributes
  show vty-attributes (application|library|global)
  write terminal
  write file [PATH]
  write memory
  write
  show running-config
  exit
  end
  gtp state-dir PATH
  gtp local-ip A.B.C.D
  ggsn <0-255> remote-ip A.B.C.D
  ggsn <0-255> gtp-version (0|1)
  ggsn <0-255> echo-interval <1-36000>
  ggsn <0-255> no echo-interval
  imsi-acl (add|del) IMSI
  auth-policy (accept-all|closed|acl-only|remote)
  authentication (optional|required)
  encryption gea <0-4> [<0-4>] [<0-4>] [<0-4>] [<0-4>]
  encryption uea <0-2> [<0-2>] [<0-2>]
  encryption cipher-plugin-path PATH
  no encryption cipher-plugin-path PATH
  gsup ipa-name NAME
  gsup remote-ip A.B.C.D
  gsup remote-port <0-65535>
  gsup oap-id <0-65535>
  gsup oap-k K
  gsup oap-opc OPC
  apn APNAME ggsn <0-255>
  apn APNAME imsi-prefix IMSIPRE ggsn <0-255>
  access-point-name NAME
  no access-point-name NAME
  cdr filename NAME
  no cdr filename
  cdr trap
  no cdr trap
  cdr interval <1-2147483647>
  ggsn dynamic
  grx-dns-add A.B.C.D
  timer [TNNNN] [(<0-2147483647>|default)]
  timer gtp [TNNNN] [(<0-2147483647>|default)]
  no compression rfc1144
  compression rfc1144 active slots <1-256>
  compression rfc1144 passive
  no compression v42bis
  compression v42bis active direction (ms|sgsn|both) codewords <512-65535> strlen <6-250>
  compression v42bis passive
  mme NAME
  no mme NAME
  cs7-instance-iu <0-15>
  iu rab-assign-addr-enc (x213|v4raw)
  asn1 debug (1|0)
  asn1 xer-print (1|0)

OsmoSGSN(config-sgsn)# mme test0

OsmoSGSN(config-sgsn-mme)# gtp remote-ip 1.2.3.4

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 907 10 567

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 202 12 51

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 907 10 567

OsmoSGSN(config-sgsn-mme)# exit

OsmoSGSN(config-sgsn)# mme test1

OsmoSGSN(config-sgsn-mme)# gtp remote-ip 5.6.7.8

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default

OsmoSGSN(config-sgsn-mme)# exit

OsmoSGSN(config-sgsn)# show running-config

Current configuration:
!
!
log stderr
 logging filter all 1
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging print thread-id 0
 logging timestamp 0
 logging print level 1
 logging print file basename last
 logging level mm notice
 logging level pag notice
 logging level meas notice
 logging level ref notice
 logging level gprs notice
 logging level llc notice
 logging level sndcp notice
 logging level slhc notice
 logging level ranap notice
 logging level sua notice
 logging level v42bis notice
 logging level gtp notice
 logging level rim notice
 logging level ra notice
 logging level lglobal notice
 logging level llapd notice
 logging level linp notice
 logging level lmux notice
 logging level lmi notice
 logging level lmib notice
 logging level lsms notice
 logging level lctrl notice
 logging level lgtp notice
 logging level lstats notice
 logging level lgsup notice
 logging level loap notice
 logging level lss7 notice
 logging level lsccp notice
 logging level lsua notice
 logging level lm3ua notice
 logging level lmgcp notice
 logging level ljibuf notice
 logging level lrspro notice
 logging level lns notice
 logging level lbssgp notice
 logging level lnsdata notice
 logging level lnssignal notice
 logging level liuup notice
 logging level lpfcp notice
 logging level lcsn1 notice
 logging level lio notice
!
stats interval 5
!
line vty
 no login
!
ns
 timer tns-block 3
 timer tns-block-retries 3
 timer tns-reset 3
 timer tns-reset-retries 3
 timer tns-test 30
 timer tns-alive 3
 timer tns-alive-retries 10
 timer tsns-prov 3
 timer tsns-size-retries 3
 timer tsns-config-retries 3
 timer tsns-procedures-retries 3
 bind udp local
  listen 127.0.0.1 23000
  accept-ipaccess
  ip-sns signalling-weight 1 data-weight 1
bssgp
cs7 instance 0
 point-code 0.23.4
sgsn
 gtp state-dir ./
 gtp local-ip 127.0.0.1
 ggsn 0 remote-ip 127.0.0.2
 ggsn 0 gtp-version 1
 ggsn 0 echo-interval 60
 encryption gea 0
 encryption uea 1 2
 gsup remote-ip 127.0.0.1
 gsup remote-port 4222
 auth-policy remote
 gsup oap-id 0
 ! apn * ggsn 0
 no cdr filename
 no cdr trap
 cdr interval 600
 no compression rfc1144
 no compression v42bis
 mme test0
  gtp remote-ip 1.2.3.4
  gtp ran-info-relay 907 10 567
  gtp ran-info-relay 202 12 51
 mme test1
  gtp remote-ip 5.6.7.8
  gtp ran-info-relay default
 cs7-instance-iu 0
end
OsmoSGSN(config-sgsn)# mme test0

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default
% Another MME test1 is already set as default route, remove it before setting it here.
OsmoSGSN(config-sgsn-mme)# exit

OsmoSGSN(config-sgsn)# mme test1

OsmoSGSN(config-sgsn-mme)# no gtp ran-info-relay default

OsmoSGSN(config-sgsn-mme)# exit

OsmoSGSN(config-sgsn)# mme test0

OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default

OsmoSGSN(config-sgsn-mme)# exit

OsmoSGSN(config-sgsn)# show running-config

Current configuration:
!
!
log stderr
 logging filter all 1
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging print thread-id 0
 logging timestamp 0
 logging print level 1
 logging print file basename last
 logging level mm notice
 logging level pag notice
 logging level meas notice
 logging level ref notice
 logging level gprs notice
 logging level llc notice
 logging level sndcp notice
 logging level slhc notice
 logging level ranap notice
 logging level sua notice
 logging level v42bis notice
 logging level gtp notice
 logging level rim notice
 logging level ra notice
 logging level lglobal notice
 logging level llapd notice
 logging level linp notice
 logging level lmux notice
 logging level lmi notice
 logging level lmib notice
 logging level lsms notice
 logging level lctrl notice
 logging level lgtp notice
 logging level lstats notice
 logging level lgsup notice
 logging level loap notice
 logging level lss7 notice
 logging level lsccp notice
 logging level lsua notice
 logging level lm3ua notice
 logging level lmgcp notice
 logging level ljibuf notice
 logging level lrspro notice
 logging level lns notice
 logging level lbssgp notice
 logging level lnsdata notice
 logging level lnssignal notice
 logging level liuup notice
 logging level lpfcp notice
 logging level lcsn1 notice
 logging level lio notice
!
stats interval 5
!
line vty
 no login
!
ns
 timer tns-block 3
 timer tns-block-retries 3
 timer tns-reset 3
 timer tns-reset-retries 3
 timer tns-test 30
 timer tns-alive 3
 timer tns-alive-retries 10
 timer tsns-prov 3
 timer tsns-size-retries 3
 timer tsns-config-retries 3
 timer tsns-procedures-retries 3
 bind udp local
  listen 127.0.0.1 23000
  accept-ipaccess
  ip-sns signalling-weight 1 data-weight 1
bssgp
cs7 instance 0
 point-code 0.23.4
sgsn
 gtp state-dir ./
 gtp local-ip 127.0.0.1
 ggsn 0 remote-ip 127.0.0.2
 ggsn 0 gtp-version 1
 ggsn 0 echo-interval 60
 encryption gea 0
 encryption uea 1 2
 gsup remote-ip 127.0.0.1
 gsup remote-port 4222
 auth-policy remote
 gsup oap-id 0
 ! apn * ggsn 0
 no cdr filename
 no cdr trap
 cdr interval 600
 no compression rfc1144
 no compression v42bis
 mme test0
  gtp remote-ip 1.2.3.4
  gtp ran-info-relay default
  gtp ran-info-relay 907 10 567
  gtp ran-info-relay 202 12 51
 mme test1
  gtp remote-ip 5.6.7.8
 cs7-instance-iu 0
end
OsmoSGSN(config-sgsn)# no mme test0

OsmoSGSN(config-sgsn)# show running-config

Current configuration:
!
!
log stderr
 logging filter all 1
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging print thread-id 0
 logging timestamp 0
 logging print level 1
 logging print file basename last
 logging level mm notice
 logging level pag notice
 logging level meas notice
 logging level ref notice
 logging level gprs notice
 logging level llc notice
 logging level sndcp notice
 logging level slhc notice
 logging level ranap notice
 logging level sua notice
 logging level v42bis notice
 logging level gtp notice
 logging level rim notice
 logging level ra notice
 logging level lglobal notice
 logging level llapd notice
 logging level linp notice
 logging level lmux notice
 logging level lmi notice
 logging level lmib notice
 logging level lsms notice
 logging level lctrl notice
 logging level lgtp notice
 logging level lstats notice
 logging level lgsup notice
 logging level loap notice
 logging level lss7 notice
 logging level lsccp notice
 logging level lsua notice
 logging level lm3ua notice
 logging level lmgcp notice
 logging level ljibuf notice
 logging level lrspro notice
 logging level lns notice
 logging level lbssgp notice
 logging level lnsdata notice
 logging level lnssignal notice
 logging level liuup notice
 logging level lpfcp notice
 logging level lcsn1 notice
 logging level lio notice
!
stats interval 5
!
line vty
 no login
!
ns
 timer tns-block 3
 timer tns-block-retries 3
 timer tns-reset 3
 timer tns-reset-retries 3
 timer tns-test 30
 timer tns-alive 3
 timer tns-alive-retries 10
 timer tsns-prov 3
 timer tsns-size-retries 3
 timer tsns-config-retries 3
 timer tsns-procedures-retries 3
 bind udp local
  listen 127.0.0.1 23000
  accept-ipaccess
  ip-sns signalling-weight 1 data-weight 1
bssgp
cs7 instance 0
 point-code 0.23.4
sgsn
 gtp state-dir ./
 gtp local-ip 127.0.0.1
 ggsn 0 remote-ip 127.0.0.2
 ggsn 0 gtp-version 1
 ggsn 0 echo-interval 60
 encryption gea 0
 encryption uea 1 2
 gsup remote-ip 127.0.0.1
 gsup remote-port 4222
 auth-policy remote
 gsup oap-id 0
 ! apn * ggsn 0
 no cdr filename
 no cdr trap
 cdr interval 600
 no compression rfc1144
 no compression v42bis
 mme test1
  gtp remote-ip 5.6.7.8
 cs7-instance-iu 0
end
OsmoSGSN(config-sgsn)# no mme test1

OsmoSGSN(config-sgsn)# encryption gea 0 3

OsmoSGSN(config-sgsn)# encryption uea 1 2

OsmoSGSN(config-sgsn)# encryption cipher-plugin-path /foo/bar

OsmoSGSN(config-sgsn)# show running-config

Current configuration:
!
!
log stderr
 logging filter all 1
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging print thread-id 0
 logging timestamp 0
 logging print level 1
 logging print file basename last
 logging level mm notice
 logging level pag notice
 logging level meas notice
 logging level ref notice
 logging level gprs notice
 logging level llc notice
 logging level sndcp notice
 logging level slhc notice
 logging level ranap notice
 logging level sua notice
 logging level v42bis notice
 logging level gtp notice
 logging level rim notice
 logging level ra notice
 logging level lglobal notice
 logging level llapd notice
 logging level linp notice
 logging level lmux notice
 logging level lmi notice
 logging level lmib notice
 logging level lsms notice
 logging level lctrl notice
 logging level lgtp notice
 logging level lstats notice
 logging level lgsup notice
 logging level loap notice
 logging level lss7 notice
 logging level lsccp notice
 logging level lsua notice
 logging level lm3ua notice
 logging level lmgcp notice
 logging level ljibuf notice
 logging level lrspro notice
 logging level lns notice
 logging level lbssgp notice
 logging level lnsdata notice
 logging level lnssignal notice
 logging level liuup notice
 logging level lpfcp notice
 logging level lcsn1 notice
 logging level lio notice
!
stats interval 5
!
line vty
 no login
!
ns
 timer tns-block 3
 timer tns-block-retries 3
 timer tns-reset 3
 timer tns-reset-retries 3
 timer tns-test 30
 timer tns-alive 3
 timer tns-alive-retries 10
 timer tsns-prov 3
 timer tsns-size-retries 3
 timer tsns-config-retries 3
 timer tsns-procedures-retries 3
 bind udp local
  listen 127.0.0.1 23000
  accept-ipaccess
  ip-sns signalling-weight 1 data-weight 1
bssgp
cs7 instance 0
 point-code 0.23.4
sgsn
 gtp state-dir ./
 gtp local-ip 127.0.0.1
 ggsn 0 remote-ip 127.0.0.2
 ggsn 0 gtp-version 1
 ggsn 0 echo-interval 60
 encryption gea 0 3
 encryption uea 1 2
 encryption cipher-plugin-path /foo/bar
 gsup remote-ip 127.0.0.1
 gsup remote-port 4222
 auth-policy remote
 gsup oap-id 0
 ! apn * ggsn 0
 no cdr filename
 no cdr trap
 cdr interval 600
 no compression rfc1144
 no compression v42bis
 cs7-instance-iu 0
end
signal 15 received
Terminating took 0.897s

RESULTS:
pass: ./osmo-sgsn_test-nodes.vty

rm -f ./gsn_restart
make[7]: Leaving directory '/build/tests'
make[6]: Leaving directory '/build/tests'
make ctrl-python-test
make[6]: Entering directory '/build/tests'
./ctrl_test_runner.py -w /build -v
testListSubscribers (__main__.TestCtrlSGSN.testListSubscribers) ... ok

----------------------------------------------------------------------
Ran 1 test in 3.415s

OK
confpath /build/tests/.., workdir /build
Running tests for specific control commands
Opening /dev/null
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn.cfg'
Connecting to host 127.0.0.1:4251
Sending "GET 1000 subscriber-list-active-v1"
Got message: GET_REPLY 1000 subscriber-list-active-v1 
Decoded replies:  {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'subscriber-list-active-v1', 'value': None}}
Terminating took 0.897s
Process returned code: 0
rm -f ../gsn_restart ../gtphub_restart_count
make[6]: Leaving directory '/build/tests'
make[5]: Leaving directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
Making check in manuals
make[3]: Entering directory '/build/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
	make osmosgsn-usermanual.check; \
fi
make[4]: Entering directory '/build/doc/manuals'
if ! [ -f osmosgsn-usermanual.adoc ]; then \
	ln -s osmosgsn-usermanual.adoc osmosgsn-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common'  osmosgsn-usermanual.adoc > osmosgsn-usermanual.check 2>&1
touch osmosgsn-usermanual.check
make[4]: Leaving directory '/build/doc/manuals'
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ DISTCHECK_CONFIGURE_FLAGS='--enable-werror --enable-iu --enable-external-tests --enable-manuals'
+ make -j 12 distcheck
make  dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make  distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-sgsn-1.12.0.41-1b546"; then find "osmo-sgsn-1.12.0.41-1b546" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-sgsn-1.12.0.41-1b546" || { sleep 5 && rm -rf "osmo-sgsn-1.12.0.41-1b546"; }; else :; fi
test -d "osmo-sgsn-1.12.0.41-1b546" || mkdir "osmo-sgsn-1.12.0.41-1b546"
 (cd include && make  top_distdir=../osmo-sgsn-1.12.0.41-1b546 distdir=../osmo-sgsn-1.12.0.41-1b546/include \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make  distdir-am
make[4]: Entering directory '/build/include'
 (cd osmocom && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/include/osmocom \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/include/osmocom'
make  distdir-am
make[6]: Entering directory '/build/include/osmocom'
 (cd gtphub && make  top_distdir=../../../osmo-sgsn-1.12.0.41-1b546 distdir=../../../osmo-sgsn-1.12.0.41-1b546/include/osmocom/gtphub \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/include/osmocom/gtphub'
make  distdir-am
make[8]: Entering directory '/build/include/osmocom/gtphub'
make[8]: Leaving directory '/build/include/osmocom/gtphub'
make[7]: Leaving directory '/build/include/osmocom/gtphub'
 (cd sgsn && make  top_distdir=../../../osmo-sgsn-1.12.0.41-1b546 distdir=../../../osmo-sgsn-1.12.0.41-1b546/include/osmocom/sgsn \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/include/osmocom/sgsn'
make  distdir-am
make[8]: Entering directory '/build/include/osmocom/sgsn'
make[8]: Leaving directory '/build/include/osmocom/sgsn'
make[7]: Leaving directory '/build/include/osmocom/sgsn'
make[6]: Leaving directory '/build/include/osmocom'
make[5]: Leaving directory '/build/include/osmocom'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
 (cd src && make  top_distdir=../osmo-sgsn-1.12.0.41-1b546 distdir=../osmo-sgsn-1.12.0.41-1b546/src \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make  distdir-am
make[4]: Entering directory '/build/src'
 (cd libvlr && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/src/libvlr \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/libvlr'
make  distdir-am
make[6]: Entering directory '/build/src/libvlr'
make[6]: Leaving directory '/build/src/libvlr'
make[5]: Leaving directory '/build/src/libvlr'
 (cd gprs && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/src/gprs \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/gprs'
make  distdir-am
make[6]: Entering directory '/build/src/gprs'
make[6]: Leaving directory '/build/src/gprs'
make[5]: Leaving directory '/build/src/gprs'
 (cd sgsn && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/src/sgsn \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/sgsn'
make  distdir-am
make[6]: Entering directory '/build/src/sgsn'
make[6]: Leaving directory '/build/src/sgsn'
make[5]: Leaving directory '/build/src/sgsn'
 (cd gtphub && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/src/gtphub \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/gtphub'
make  distdir-am
make[6]: Entering directory '/build/src/gtphub'
make[6]: Leaving directory '/build/src/gtphub'
make[5]: Leaving directory '/build/src/gtphub'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
 (cd contrib && make  top_distdir=../osmo-sgsn-1.12.0.41-1b546 distdir=../osmo-sgsn-1.12.0.41-1b546/contrib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make  distdir-am
make[4]: Entering directory '/build/contrib'
 (cd systemd && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/contrib/systemd \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make  distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
 (cd tests && make  top_distdir=../osmo-sgsn-1.12.0.41-1b546 distdir=../osmo-sgsn-1.12.0.41-1b546/tests \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make  distdir-am
make[4]: Entering directory '/build/tests'
 (cd gprs && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/gprs \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gprs'
make  distdir-am
make[6]: Entering directory '/build/tests/gprs'
make[6]: Leaving directory '/build/tests/gprs'
make[5]: Leaving directory '/build/tests/gprs'
 (cd gtphub && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/gtphub \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gtphub'
make  distdir-am
make[6]: Entering directory '/build/tests/gtphub'
make[6]: Leaving directory '/build/tests/gtphub'
make[5]: Leaving directory '/build/tests/gtphub'
 (cd gprs_routing_area && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/gprs_routing_area \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gprs_routing_area'
make  distdir-am
make[6]: Entering directory '/build/tests/gprs_routing_area'
make[6]: Leaving directory '/build/tests/gprs_routing_area'
make[5]: Leaving directory '/build/tests/gprs_routing_area'
 (cd sgsn && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/sgsn \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/sgsn'
make  distdir-am
make[6]: Entering directory '/build/tests/sgsn'
make[6]: Leaving directory '/build/tests/sgsn'
make[5]: Leaving directory '/build/tests/sgsn'
 (cd xid && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/xid \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/xid'
make  distdir-am
make[6]: Entering directory '/build/tests/xid'
make[6]: Leaving directory '/build/tests/xid'
make[5]: Leaving directory '/build/tests/xid'
 (cd sndcp_xid && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/sndcp_xid \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/sndcp_xid'
make  distdir-am
make[6]: Entering directory '/build/tests/sndcp_xid'
make[6]: Leaving directory '/build/tests/sndcp_xid'
make[5]: Leaving directory '/build/tests/sndcp_xid'
 (cd slhc && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/slhc \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/slhc'
make  distdir-am
make[6]: Entering directory '/build/tests/slhc'
make[6]: Leaving directory '/build/tests/slhc'
make[5]: Leaving directory '/build/tests/slhc'
 (cd v42bis && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/tests/v42bis \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/v42bis'
make  distdir-am
make[6]: Entering directory '/build/tests/v42bis'
make[6]: Leaving directory '/build/tests/v42bis'
make[5]: Leaving directory '/build/tests/v42bis'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
 (cd doc && make  top_distdir=../osmo-sgsn-1.12.0.41-1b546 distdir=../osmo-sgsn-1.12.0.41-1b546/doc \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make  distdir-am
make[4]: Entering directory '/build/doc'
 (cd examples && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/doc/examples \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make  distdir-am
make[6]: Entering directory '/build/doc/examples'
make  \
  top_distdir="../../osmo-sgsn-1.12.0.41-1b546" distdir="../../osmo-sgsn-1.12.0.41-1b546/doc/examples" \
  dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
	j="../../osmo-sgsn-1.12.0.41-1b546/doc/examples/$f" && \
	mkdir -p "$(dirname $j)" && \
	/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
 (cd manuals && make  top_distdir=../../osmo-sgsn-1.12.0.41-1b546 distdir=../../osmo-sgsn-1.12.0.41-1b546/doc/manuals \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make  distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
make  \
  top_distdir="osmo-sgsn-1.12.0.41-1b546" distdir="osmo-sgsn-1.12.0.41-1b546" \
  dist-hook
make[3]: Entering directory '/build'
echo 1.12.0.41-1b546 > osmo-sgsn-1.12.0.41-1b546/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-sgsn-1.12.0.41-1b546" -type d ! -perm -755 \
	-exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-sgsn-1.12.0.41-1b546"
make[2]: Leaving directory '/build'
tardir=osmo-sgsn-1.12.0.41-1b546 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-sgsn-1.12.0.41-1b546.tar.bz2
tardir=osmo-sgsn-1.12.0.41-1b546 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-sgsn-1.12.0.41-1b546.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-sgsn-1.12.0.41-1b546"; then find "osmo-sgsn-1.12.0.41-1b546" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-sgsn-1.12.0.41-1b546" || { sleep 5 && rm -rf "osmo-sgsn-1.12.0.41-1b546"; }; else :; fi
case 'osmo-sgsn-1.12.0.41-1b546.tar.gz osmo-sgsn-1.12.0.41-1b546.tar.bz2' in \
*.tar.gz*) \
  eval GZIP= gzip --best -dc osmo-sgsn-1.12.0.41-1b546.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
  bzip2 -dc osmo-sgsn-1.12.0.41-1b546.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
  lzip -dc osmo-sgsn-1.12.0.41-1b546.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
  xz -dc osmo-sgsn-1.12.0.41-1b546.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
  uncompress -c osmo-sgsn-1.12.0.41-1b546.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
  eval GZIP= gzip --best -dc osmo-sgsn-1.12.0.41-1b546.shar.gz | unshar ;;\
*.zip*) \
  unzip osmo-sgsn-1.12.0.41-1b546.zip ;;\
*.tar.zst*) \
  zstd -dc osmo-sgsn-1.12.0.41-1b546.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-sgsn-1.12.0.41-1b546
chmod u+w osmo-sgsn-1.12.0.41-1b546
mkdir osmo-sgsn-1.12.0.41-1b546/_build osmo-sgsn-1.12.0.41-1b546/_build/sub osmo-sgsn-1.12.0.41-1b546/_inst
chmod a-w osmo-sgsn-1.12.0.41-1b546
test -d osmo-sgsn-1.12.0.41-1b546/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.41-1b546/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
  && am__cwd=`pwd` \
  && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.41-1b546/_build/sub \
  && ../../configure \
    --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
    --enable-werror --enable-iu --enable-external-tests --enable-manuals \
    --srcdir=../.. --prefix="$dc_install_base" \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$dc_destdir") \
       && make  DESTDIR="$dc_destdir" install \
       && make  DESTDIR="$dc_destdir" uninstall \
       && make  DESTDIR="$dc_destdir" \
            distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf osmo-sgsn-1.12.0.41-1b546.tar.gz osmo-sgsn-1.12.0.41-1b546.tar.bz2 \
  && make  distcleancheck \
  && cd "$am__cwd" \
  || exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmo-gsup-client >= 1.8.0... yes
checking for libgtp >= 1.12.0... yes
checking for libosmo-sigtran >= 1.9.0... yes
checking for libasn1c >= 0.9.30... yes
checking for libosmo-ranap >= 1.6.0... yes
checking for libcares... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking whether struct tm has tm_gmtoff member... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS="-g -O2 -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/gtphub/Makefile
config.status: creating include/osmocom/sgsn/Makefile
config.status: creating src/Makefile
config.status: creating src/libvlr/Makefile
config.status: creating src/gprs/Makefile
config.status: creating src/sgsn/Makefile
config.status: creating src/gtphub/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/gprs/Makefile
config.status: creating tests/gprs_routing_area/Makefile
config.status: creating tests/sgsn/Makefile
config.status: creating tests/gtphub/Makefile
config.status: creating tests/xid/Makefile
config.status: creating tests/sndcp_xid/Makefile
config.status: creating tests/slhc/Makefile
config.status: creating tests/v42bis/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub'
make  all-recursive
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub'
Making all in include
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include'
Making all in osmocom
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom'
Making all in gtphub
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom/gtphub'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom/gtphub'
Making all in sgsn
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom/sgsn'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom/sgsn'
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/include'
Making all in src
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/src'
Making all in libvlr
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/src/libvlr'
  CC       vlr.o
  CC       vlr_access_req_fsm.o
  CC       vlr_auth_fsm.o
  CC       vlr_lu_fsm.o
  CC       vlr_sgs.o
  CC       vlr_sgs_fsm.o
../../../../src/libvlr/vlr_sgs.c:25:10: fatal error: osmocom/vlr/vlr.h: No such file or directory
   25 | #include <osmocom/vlr/vlr.h>
      |          ^~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:437: vlr_sgs.o] Error 1
make[4]: *** Waiting for unfinished jobs....
../../../../src/libvlr/vlr_lu_fsm.c:25:10: fatal error: osmocom/vlr/vlr.h: No such file or directory
   25 | #include <osmocom/vlr/vlr.h>
      |          ^~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:437: vlr_lu_fsm.o] Error 1
../../../../src/libvlr/vlr_auth_fsm.c:27:10: fatal error: osmocom/vlr/vlr.h: No such file or directory
   27 | #include <osmocom/vlr/vlr.h>
      |          ^~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:437: vlr_auth_fsm.o] Error 1
../../../../src/libvlr/vlr_access_req_fsm.c:26:10: fatal error: osmocom/vlr/vlr.h: No such file or directory
   26 | #include <osmocom/vlr/vlr.h>
      |          ^~~~~~~~~~~~~~~~~~~
compilation terminated.
../../../../src/libvlr/vlr.c:35:10: fatal error: osmocom/vlr/vlr_sgs.h: No such file or directory
   35 | #include <osmocom/vlr/vlr_sgs.h>
      |          ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:437: vlr_access_req_fsm.o] Error 1
make[4]: *** [Makefile:437: vlr.o] Error 1
../../../../src/libvlr/vlr_sgs_fsm.c:24:10: fatal error: osmocom/vlr/vlr.h: No such file or directory
   24 | #include <osmocom/vlr/vlr.h>
      |          ^~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:437: vlr_sgs_fsm.o] Error 1
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/src/libvlr'
make[3]: *** [Makefile:392: all-recursive] Error 1
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub/src'
make[2]: *** [Makefile:459: all-recursive] Error 1
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub'
make[1]: *** [Makefile:391: all] Error 2
make[1]: Leaving directory '/build/osmo-sgsn-1.12.0.41-1b546/_build/sub'
make: *** [Makefile:678: distcheck] Error 1
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
Finished: FAILURE