Skipping 28 KB..
Full Log -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c
board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits'
board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask'
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c
../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits'
../common/fpga_load.c:181: warning 126: unreachable code
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c
test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' .
test -f ../common/`basename 'usb_descriptors.a51'` -o \
\! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \
|| ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'`
sdas8051 -plosgff `basename 'usb_descriptors.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o spi.rel `test -f 'spi.c' || echo './'`spi.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c
sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel
make[4]: Leaving directory '/build/firmware/src/usrp2'
make[4]: Entering directory '/build/firmware/src'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/firmware/src'
make[3]: Leaving directory '/build/firmware/src'
make[3]: Entering directory '/build/firmware'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/firmware'
make[2]: Leaving directory '/build/firmware'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ make distcheck
make dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "libusrp-3.4.9.1-7530"; then find "libusrp-3.4.9.1-7530" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.9.1-7530" || { sleep 5 && rm -rf "libusrp-3.4.9.1-7530"; }; else :; fi
test -d "libusrp-3.4.9.1-7530" || mkdir "libusrp-3.4.9.1-7530"
(cd host && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/host \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/host'
make distdir-am
make[4]: Entering directory '/build/host'
(cd misc && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/misc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/host/misc'
make distdir-am
make[6]: Entering directory '/build/host/misc'
make[6]: Leaving directory '/build/host/misc'
make[5]: Leaving directory '/build/host/misc'
(cd lib && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/lib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/host/lib'
make[6]: Entering directory '/build/host/lib'
mkdir -p .deps
PYTHONPATH=../../usrp/src srcdir=. /usr/bin/python3 ./gen_usrp_dbid.py ./usrp_dbid.dat
make[6]: Leaving directory '/build/host/lib'
make distdir-am
make[6]: Entering directory '/build/host/lib'
make[6]: Leaving directory '/build/host/lib'
make[5]: Leaving directory '/build/host/lib'
(cd include && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/host/include'
make distdir-am
make[6]: Entering directory '/build/host/include'
(cd usrp && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/host/include/usrp \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/host/include/usrp'
make distdir-am
make[8]: Entering directory '/build/host/include/usrp'
make[8]: Leaving directory '/build/host/include/usrp'
make[7]: Leaving directory '/build/host/include/usrp'
make[6]: Leaving directory '/build/host/include'
make[5]: Leaving directory '/build/host/include'
(cd apps && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/apps \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/host/apps'
make distdir-am
make[6]: Entering directory '/build/host/apps'
make[6]: Leaving directory '/build/host/apps'
make[5]: Leaving directory '/build/host/apps'
(cd swig && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/swig \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/host/swig'
make distdir-am
make[6]: Entering directory '/build/host/swig'
make[6]: Leaving directory '/build/host/swig'
make[5]: Leaving directory '/build/host/swig'
make[4]: Leaving directory '/build/host'
make[3]: Leaving directory '/build/host'
(cd fpga && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/fpga \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/fpga'
make distdir-am
make[4]: Entering directory '/build/fpga'
(cd rbf && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/fpga/rbf \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/fpga/rbf'
make distdir-am
make[6]: Entering directory '/build/fpga/rbf'
(cd rev2 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/fpga/rbf/rev2 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/fpga/rbf/rev2'
make distdir-am
make[8]: Entering directory '/build/fpga/rbf/rev2'
make[8]: Leaving directory '/build/fpga/rbf/rev2'
make[7]: Leaving directory '/build/fpga/rbf/rev2'
(cd rev4 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/fpga/rbf/rev4 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/fpga/rbf/rev4'
make distdir-am
make[8]: Entering directory '/build/fpga/rbf/rev4'
make[8]: Leaving directory '/build/fpga/rbf/rev4'
make[7]: Leaving directory '/build/fpga/rbf/rev4'
make[6]: Leaving directory '/build/fpga/rbf'
make[5]: Leaving directory '/build/fpga/rbf'
make[4]: Leaving directory '/build/fpga'
make[3]: Leaving directory '/build/fpga'
(cd doc && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd other && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/doc/other \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/other'
make distdir-am
make[6]: Entering directory '/build/doc/other'
make[6]: Leaving directory '/build/doc/other'
make[5]: Leaving directory '/build/doc/other'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd firmware && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/firmware \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/firmware'
make distdir-am
make[4]: Entering directory '/build/firmware'
(cd include && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/firmware/include'
make distdir-am
make[6]: Entering directory '/build/firmware/include'
make[6]: Leaving directory '/build/firmware/include'
make[5]: Leaving directory '/build/firmware/include'
(cd lib && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/lib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/firmware/lib'
make distdir-am
make[6]: Entering directory '/build/firmware/lib'
make[6]: Leaving directory '/build/firmware/lib'
make[5]: Leaving directory '/build/firmware/lib'
(cd src && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/firmware/src'
make distdir-am
make[6]: Entering directory '/build/firmware/src'
(cd common && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/firmware/src/common \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/firmware/src/common'
make distdir-am
make[8]: Entering directory '/build/firmware/src/common'
make[8]: Leaving directory '/build/firmware/src/common'
make[7]: Leaving directory '/build/firmware/src/common'
(cd usrp2 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/firmware/src/usrp2 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/firmware/src/usrp2'
make distdir-am
make[8]: Entering directory '/build/firmware/src/usrp2'
make[8]: Leaving directory '/build/firmware/src/usrp2'
make[7]: Leaving directory '/build/firmware/src/usrp2'
make[6]: Leaving directory '/build/firmware/src'
make[5]: Leaving directory '/build/firmware/src'
make[4]: Leaving directory '/build/firmware'
make[3]: Leaving directory '/build/firmware'
make \
top_distdir="libusrp-3.4.9.1-7530" distdir="libusrp-3.4.9.1-7530" \
dist-hook
make[3]: Entering directory '/build'
echo 3.4.9.1-7530 > libusrp-3.4.9.1-7530/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "libusrp-3.4.9.1-7530" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "libusrp-3.4.9.1-7530"
make[2]: Leaving directory '/build'
tardir=libusrp-3.4.9.1-7530 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >libusrp-3.4.9.1-7530.tar.gz
make[1]: Leaving directory '/build'
if test -d "libusrp-3.4.9.1-7530"; then find "libusrp-3.4.9.1-7530" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.9.1-7530" || { sleep 5 && rm -rf "libusrp-3.4.9.1-7530"; }; else :; fi
case 'libusrp-3.4.9.1-7530.tar.gz' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc libusrp-3.4.9.1-7530.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc libusrp-3.4.9.1-7530.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc libusrp-3.4.9.1-7530.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc libusrp-3.4.9.1-7530.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c libusrp-3.4.9.1-7530.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc libusrp-3.4.9.1-7530.shar.gz | unshar ;;\
*.zip*) \
unzip libusrp-3.4.9.1-7530.zip ;;\
*.tar.zst*) \
zstd -dc libusrp-3.4.9.1-7530.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w libusrp-3.4.9.1-7530
chmod u+w libusrp-3.4.9.1-7530
mkdir libusrp-3.4.9.1-7530/_build libusrp-3.4.9.1-7530/_build/sub libusrp-3.4.9.1-7530/_inst
chmod a-w libusrp-3.4.9.1-7530
test -d libusrp-3.4.9.1-7530/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd libusrp-3.4.9.1-7530/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd libusrp-3.4.9.1-7530/_build/sub \
&& ../../configure \
\
\
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf libusrp-3.4.9.1-7530.tar.gz \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for gcc... gcc
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libusb-1.0... yes
checking for boostlib >= 1.37 (103700)... yes
checking whether the Boost::Thread library is available... yes
checking for exit in -lboost_thread... yes
checking whether the Boost::Date_Time library is available... yes
checking for exit in -lboost_date_time... yes
checking whether the Boost::Filesystem library is available... yes
checking for exit in -lboost_filesystem... yes
checking whether the Boost::Program_Options library is available... yes
checking for exit in -lboost_program_options... yes
checking whether the Boost::System library is available... yes
checking for exit in -lboost_system... yes
checking for python... no
checking for python2... no
checking for python3... /usr/bin/python3
checking for python version... 3.11
checking for python platform... linux
checking for GNU default python prefix... ${prefix}
checking for GNU default python exec_prefix... ${exec_prefix}
checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages
checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages
checking for doxygen... /usr/bin/doxygen
checking for xmlto... no
checking for sdcc... sdcc -mmcs51 --no-xinit-opt
checking for sdas8051... sdas8051 -plosgff
checking sdcc_version "4.2.0
published under GNU General Public License (GPL)"... 4 published under GNU General Public License (GPL).2 published under GNU General Public License (GPL).0 published under GNU General Public License (GPL)
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating usrp.pc
config.status: creating usrp.iss
config.status: creating doc/Doxyfile
config.status: creating doc/Makefile
config.status: creating doc/other/Makefile
config.status: creating host/Makefile
config.status: creating host/include/Makefile
config.status: creating host/include/usrp/Makefile
config.status: creating host/include/usrp/libusb_types.h
config.status: creating host/misc/Makefile
config.status: creating host/lib/Makefile
config.status: creating host/lib/std_paths.h
config.status: creating host/swig/Makefile
config.status: creating host/apps/Makefile
config.status: creating firmware/Makefile
config.status: creating firmware/include/Makefile
config.status: creating firmware/lib/Makefile
config.status: creating firmware/src/Makefile
config.status: creating firmware/src/common/Makefile
config.status: creating firmware/src/usrp2/Makefile
config.status: creating fpga/Makefile
config.status: creating fpga/rbf/Makefile
config.status: creating fpga/rbf/rev2/Makefile
config.status: creating fpga/rbf/rev4/Makefile
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make all-recursive
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making all in host
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making all in misc
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make all-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
CXX bug_work_around_8.lo
CXXLD libmisc.la
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making all in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: '../../../../host/lib/stamp-sources-generate' is up to date.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make all-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
CXX fusb.lo
CC md5.lo
CXX usrp_basic.lo
CXX usrp_config.lo
CXX usrp_dbid.lo
CXX usrp_local_sighandler.lo
CXX usrp_prims_common.lo
CXX usrp_standard.lo
CXX db_wbxng_adf4350.lo
CXX db_wbxng_adf4350_regs.lo
CXX db_boards.lo
CXX db_base.lo
CXX db_basic.lo
CXX db_bitshark_rx.lo
../../../../host/lib/db_bitshark_rx.cc: In member function 'virtual bool db_bitshark_rx::set_bw(float)':
../../../../host/lib/db_bitshark_rx.cc:207:11: warning: 'void* memcpy(void*, const void*, size_t)' reading 4 bytes from a region of size 2 [-Wstringop-overread]
207 | memcpy(val,&rf_bw_in_khz,4);
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~
../../../../host/lib/db_bitshark_rx.cc:195:14: note: source object 'rf_bw_in_khz' of size 2
195 | uint16_t rf_bw_in_khz = (uint16_t)(bw/1000.0);
| ^~~~~~~~~~~~
CXX db_tv_rx.lo
CXX db_tv_rx_mimo.lo
CXX db_flexrf.lo
CXX db_flexrf_mimo.lo
CXX db_dbs_rx.lo
CXX db_wbxng.lo
CXX db_xcvr2450.lo
CXX db_dtt754.lo
CXX db_dtt768.lo
CXX db_util.lo
CXX fusb_libusb1.lo
CXX fusb_sysconfig_libusb1.lo
CXX usrp_prims_libusb1.lo
../../../../host/lib/usrp_prims_libusb1.cc: In function 'void usrp_one_time_init(libusb_context**)':
../../../../host/lib/usrp_prims_libusb1.cc:155:21: warning: 'void libusb_set_debug(libusb_context*, int)' is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
155 | libusb_set_debug(*ctx, 3);
| ~~~~~~~~~~~~~~~~^~~~~~~~~
In file included from ../../../../host/include/usrp/libusb_types.h:26,
from ../../../../host/include/usrp/usrp_prims.h:27,
from ../../../../host/lib/usrp_primsi.h:30,
from ../../../../host/lib/usrp_prims_libusb1.cc:27:
/usr/include/libusb-1.0/libusb.h:1365:18: note: declared here
1365 | void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
| ^~~~~~~~~~~~~~~~
CXXLD libusrp.la
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making all in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making all in usrp
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make all-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making all in apps
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make all-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
CXX usrper.o
CXXLD usrper
CXX usrp_cal_dc_offset.o
In file included from ../../../../host/apps/usrp_cal_dc_offset.cc:37:
../../../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp]
37 | #warning Using non-portable code (likely wrong other than ILP32).
| ^~~~~~~
CXXLD usrp_cal_dc_offset
CXX check_order_quickly.o
CXXLD check_order_quickly
CXX test_usrp_standard_rx.o
In file included from ../../../../host/apps/test_usrp_standard_rx.cc:36:
../../../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp]
37 | #warning Using non-portable code (likely wrong other than ILP32).
| ^~~~~~~
CC time_stuff.o
CXXLD test_usrp_standard_rx
CXX test_usrp_standard_tx.o
In file included from ../../../../host/apps/test_usrp_standard_tx.cc:37:
../../../../host/include/usrp/usrp_bytesex.h:37:2: warning: #warning Using non-portable code (likely wrong other than ILP32). [-Wcpp]
37 | #warning Using non-portable code (likely wrong other than ILP32).
| ^~~~~~~
CXXLD test_usrp_standard_tx
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making all in fpga
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making all in rbf
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making all in rev2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make all-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making all in rev4
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make all-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making all in doc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make all-recursive
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making all in other
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make all-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
/usr/bin/mkdir -p html
/usr/bin/doxygen Doxyfile
warning: Tag 'COLS_IN_ALPHA_INDEX' at line 556 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'HTML_ALIGN_MEMBERS' at line 611 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'XML_SCHEMA' at line 843 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'XML_DTD' at line 849 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'PERL_PATH' at line 1008 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: Tag 'CLASS_DIAGRAMS' at line 1020 of file 'Doxyfile' has become obsolete.
To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u"
warning: argument '@enable_html_docs@' for option GENERATE_HTML is not a valid boolean value
Using the default: YES!
warning: argument '@enable_latex_docs@' for option GENERATE_LATEX is not a valid boolean value
Using the default: YES!
warning: argument '@enable_xml_docs@' for option GENERATE_XML is not a valid boolean value
Using the default: NO!
warning: argument '@HAVE_DOT@' for option HAVE_DOT is not a valid boolean value
Using the default: YES!
warning: tag INPUT: input source '../../../usrp/host' does not exist
warning: tag INPUT: input source '../../../usrp/doc/other' does not exist
warning: source '../../../usrp/host' is not a readable file or directory... skipping.
warning: source '../../../usrp/doc/other' is not a readable file or directory... skipping.
Doxygen version used: 1.9.4
Searching for include files...
Searching for example files...
Searching for images...
Searching for dot files...
Searching for msc files...
Searching for dia files...
Searching for files to exclude
Searching INPUT for files to process...
Reading and parsing tag files
Parsing files
Building macro definition list...
Building group list...
Building directory list...
Building namespace list...
Building file list...
Building class list...
Building concept list...
Computing nesting relations for classes...
Associating documentation with classes...
Associating documentation with concepts...
Building example list...
Searching for enumerations...
Searching for documented typedefs...
Searching for members imported via using declarations...
Searching for included using directives...
Searching for documented variables...
Building interface member list...
Building member list...
Searching for friends...
Searching for documented defines...
Computing class inheritance relations...
Computing class usage relations...
Flushing cached template relations that have become invalid...
Computing class relations...
Add enum values to enums...
Searching for member function documentation...
Creating members for template instances...
Building page list...
Search for main page...
Computing page relations...
Determining the scope of groups...
Sorting lists...
Determining which enums are documented
Computing member relations...
Building full member lists recursively...
Adding members to member groups.
Computing member references...
Inheriting documentation...
Generating disk names...
Adding source references...
Adding xrefitems...
Sorting member lists...
Setting anonymous enum type...
Computing dependencies between directories...
Generating citations page...
Counting members...
Counting data structures...
Resolving user defined references...
Finding anchors and sections in the documentation...
Transferring function references...
Combining using relations...
Adding members to index pages...
Correcting members for VHDL...
Computing tooltip texts...
Generating style sheet...
Generating search indices...
Generating example documentation...
Generating file sources...
Generating file documentation...
Generating page documentation...
Generating group documentation...
Generating class documentation...
Generating concept documentation...
Generating namespace index...
Generating graph info page...
Generating directory documentation...
Generating index page...
Generating page index...
Generating module index...
Generating namespace index...
Generating namespace member index...
Generating concept index...
Generating annotated compound index...
Generating alphabetical compound index...
Generating hierarchical class index...
Generating graphical class hierarchy...
Generating member index...
Generating file index...
Generating file member index...
Generating example index...
finalizing index lists...
writing tag file...
Running plantuml with JAVA...
Running dot...
Running dot for graph 1/1
lookup cache used 0/65536 hits=0 misses=0
finished...
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making all in firmware
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making all in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making all in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/delay.c -o delay.rel
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/fx2utils.c -o fx2utils.rel
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/i2c.c -o i2c.rel
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/isr.c -o isr.rel
../../../../firmware/lib/isr.c:73: warning 94: comparison is always false due to limited range of data type
../../../../firmware/lib/isr.c:100: warning 94: comparison is always false due to limited range of data type
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/timer.c -o timer.rel
../../../../firmware/lib/timer.c:45: warning 158: overflow in implicit constant conversion
sdcc -mmcs51 --no-xinit-opt -I../../../../firmware/include -c ../../../../firmware/lib/usb_common.c -o usb_common.rel
../../../../firmware/lib/usb_common.c:65: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:66: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:67: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:68: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:71: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:72: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:73: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:74: warning 196: pointer target lost const qualifier
../../../../firmware/lib/usb_common.c:140: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* fixed'
../../../../firmware/lib/usb_common.c:143: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* fixed'
../../../../firmware/lib/usb_common.c:148: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* fixed'
../../../../firmware/lib/usb_common.c:150: warning 154: converting integral to pointer without a cast
from type 'int fixed'
to type 'volatile-unsigned-char xdata* fixed'
../../../../firmware/lib/usb_common.c:216: warning 126: unreachable code
../../../../firmware/lib/usb_common.c:217: warning 126: unreachable code
../../../../firmware/lib/usb_common.c:225: warning 126: unreachable code
../../../../firmware/lib/usb_common.c:226: warning 126: unreachable code
../../../../firmware/lib/usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG
../../../../firmware/lib/usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG
rm -f libfx2.lib
touch libfx2.lib
for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making all in src
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making all in common
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
srcdir=../../../../../firmware/src/common ../../../../../firmware/src/common/edit-gpif ../../../../../firmware/src/common/gpif.c usrp_gpif.c usrp_gpif_inline.h
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making all in usrp2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
test -f `basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'` || ln -s '../../../../../firmware/src/usrp2/eeprom_boot.a51' .
test -f ../common/`basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'` -o \
\! -f `dirname '../../../../../firmware/src/usrp2/eeprom_boot.a51'`/../common/`basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'` \
|| ln -s `dirname '../../../../../firmware/src/usrp2/eeprom_boot.a51'`/../common/`basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'` ../common/`basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'`
sdas8051 -plosgff `basename '../../../../../firmware/src/usrp2/eeprom_boot.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o eeprom_init.rel `test -f '../../../../../firmware/src/usrp2/eeprom_init.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/eeprom_init.c
test -f `basename '../../../../../firmware/src/usrp2/_startup.a51'` || ln -s '../../../../../firmware/src/usrp2/_startup.a51' .
test -f ../common/`basename '../../../../../firmware/src/usrp2/_startup.a51'` -o \
\! -f `dirname '../../../../../firmware/src/usrp2/_startup.a51'`/../common/`basename '../../../../../firmware/src/usrp2/_startup.a51'` \
|| ln -s `dirname '../../../../../firmware/src/usrp2/_startup.a51'`/../common/`basename '../../../../../firmware/src/usrp2/_startup.a51'` ../common/`basename '../../../../../firmware/src/usrp2/_startup.a51'`
sdas8051 -plosgff `basename '../../../../../firmware/src/usrp2/_startup.a51'`
sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel
../../../../../firmware/src/usrp2/../common/build_eeprom.py -p/build/libusrp-3.4.9.1-7530/_inst -r2 eeprom_boot.ihx > burn-usrp2-eeprom
chmod +x burn-usrp2-eeprom
../../../../../firmware/src/usrp2/../common/build_eeprom.py -p/build/libusrp-3.4.9.1-7530/_inst -r4 eeprom_boot.ihx > burn-usrp4-eeprom
chmod +x burn-usrp4-eeprom
test -f `basename '../../../../../firmware/src/usrp2/vectors.a51'` || ln -s '../../../../../firmware/src/usrp2/vectors.a51' .
test -f ../common/`basename '../../../../../firmware/src/usrp2/vectors.a51'` -o \
\! -f `dirname '../../../../../firmware/src/usrp2/vectors.a51'`/../common/`basename '../../../../../firmware/src/usrp2/vectors.a51'` \
|| ln -s `dirname '../../../../../firmware/src/usrp2/vectors.a51'`/../common/`basename '../../../../../firmware/src/usrp2/vectors.a51'` ../common/`basename '../../../../../firmware/src/usrp2/vectors.a51'`
sdas8051 -plosgff `basename '../../../../../firmware/src/usrp2/vectors.a51'`
srcdir=../../../../../firmware/src/usrp2 ../../../../../firmware/src/usrp2/edit-gpif ../../../../../firmware/src/usrp2/gpif.c usrp_gpif.c usrp_gpif_inline.h
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_main.rel `test -f '../../../../../firmware/src/usrp2/usrp_main.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/usrp_main.c
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_common.rel `test -f '../../../../../firmware/src/usrp2/usrp_common.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/usrp_common.c
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o board_specific.rel `test -f '../../../../../firmware/src/usrp2/board_specific.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/board_specific.c
../../../../../firmware/src/usrp2/board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits'
../../../../../firmware/src/usrp2/board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask'
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_load.rel `test -f '../../../../../firmware/src/usrp2/fpga_load.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/fpga_load.c
../../../../../firmware/src/usrp2/../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits'
../../../../../firmware/src/usrp2/../common/fpga_load.c:181: warning 126: unreachable code
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_rev2.rel `test -f '../../../../../firmware/src/usrp2/fpga_rev2.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/fpga_rev2.c
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o init_gpif.rel `test -f '../../../../../firmware/src/usrp2/init_gpif.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/init_gpif.c
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo '../../../../../firmware/src/usrp2/'`usrp_gpif.c
test -f `basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'` || ln -s '../../../../../firmware/src/usrp2/usb_descriptors.a51' .
test -f ../common/`basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'` -o \
\! -f `dirname '../../../../../firmware/src/usrp2/usb_descriptors.a51'`/../common/`basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'` \
|| ln -s `dirname '../../../../../firmware/src/usrp2/usb_descriptors.a51'`/../common/`basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'` ../common/`basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'`
sdas8051 -plosgff `basename '../../../../../firmware/src/usrp2/usb_descriptors.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o spi.rel `test -f '../../../../../firmware/src/usrp2/spi.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/spi.c
sdcc -mmcs51 --no-xinit-opt -I../../../../../firmware/include -I../../../../../firmware/src/usrp2 -I../../../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o eeprom_io.rel `test -f '../../../../../firmware/src/usrp2/eeprom_io.c' || echo '../../../../../firmware/src/usrp2/'`../../../../../firmware/src/usrp2/eeprom_io.c
sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making dvi in host
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making dvi in misc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making dvi in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making dvi in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making dvi in usrp
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making dvi in apps
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making dvi in fpga
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making dvi in rbf
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making dvi in rev2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making dvi in rev4
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making dvi in doc
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making dvi in other
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making dvi in firmware
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making dvi in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making dvi in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making dvi in src
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making dvi in common
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making dvi in usrp2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make check-recursive
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making check in host
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making check in misc
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make check-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making check in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: '../../../../host/lib/stamp-sources-generate' is up to date.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make check-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making check in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making check in usrp
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make check-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[6]: Nothing to be done for 'check-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making check in apps
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make check-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making check in fpga
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making check in rbf
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making check in rev2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make check-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[6]: Nothing to be done for 'check-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making check in rev4
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make check-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[6]: Nothing to be done for 'check-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making check in doc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make check-recursive
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making check in other
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make check-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[6]: Nothing to be done for 'check-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making check in firmware
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making check in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making check in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making check in src
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making check in common
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making check in usrp2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make install-recursive
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making install in host
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making install in misc
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making install in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: '../../../../host/lib/stamp-sources-generate' is up to date.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libusrp.la '/build/libusrp-3.4.9.1-7530/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libusrp.so.1.0.0 /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1.0.0
libtool: install: (cd /build/libusrp-3.4.9.1-7530/_inst/lib && { ln -s -f libusrp.so.1.0.0 libusrp.so.1 || { rm -f libusrp.so.1 && ln -s libusrp.so.1.0.0 libusrp.so.1; }; })
libtool: install: (cd /build/libusrp-3.4.9.1-7530/_inst/lib && { ln -s -f libusrp.so.1.0.0 libusrp.so || { rm -f libusrp.so && ln -s libusrp.so.1.0.0 libusrp.so; }; })
libtool: install: /usr/bin/install -c .libs/libusrp.lai /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/libusrp-3.4.9.1-7530/_inst/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/libusrp-3.4.9.1-7530/_inst/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making install in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making install in usrp
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig'
/usr/bin/install -c -m 644 ../../../../../host/include/usrp/db_base.i '/build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig'
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/include/usrp'
/usr/bin/install -c -m 644 ../../../../../host/include/usrp/db_base.h ../../../../../host/include/usrp/db_basic.h ../../../../../host/include/usrp/db_bitshark_rx.h ../../../../../host/include/usrp/db_dbs_rx.h ../../../../../host/include/usrp/db_dtt754.h ../../../../../host/include/usrp/db_dtt768.h ../../../../../host/include/usrp/db_flexrf.h ../../../../../host/include/usrp/db_flexrf_mimo.h ../../../../../host/include/usrp/db_tv_rx.h ../../../../../host/include/usrp/db_tv_rx_mimo.h ../../../../../host/include/usrp/db_wbxng.h ../../../../../host/include/usrp/db_xcvr2450.h libusb_types.h ../../../../../host/include/usrp/usrp_basic.h ../../../../../host/include/usrp/usrp_bytesex.h ../../../../../host/include/usrp/usrp_dbid.h ../../../../../host/include/usrp/usrp_local_sighandler.h ../../../../../host/include/usrp/usrp_prims.h ../../../../../host/include/usrp/usrp_slots.h ../../../../../host/include/usrp/usrp_standard.h ../../../../../host/include/usrp/usrp_subdev_spec.h ../../../../../host/include/usrp/usrp_tune_result.h '/build/libusrp-3.4.9.1-7530/_inst/include/usrp'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making install in apps
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c usrper usrp_cal_dc_offset '/build/libusrp-3.4.9.1-7530/_inst/bin'
libtool: install: /usr/bin/install -c .libs/usrper /build/libusrp-3.4.9.1-7530/_inst/bin/usrper
libtool: install: /usr/bin/install -c .libs/usrp_cal_dc_offset /build/libusrp-3.4.9.1-7530/_inst/bin/usrp_cal_dc_offset
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making install in fpga
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making install in rbf
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making install in rev2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/install -c -m 644 ../../../../../fpga/rbf/rev2/std_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev2/std_4rx_0tx.rbf ../../../../../fpga/rbf/rev2/inband_1rxhb_1tx.rbf ../../../../../fpga/rbf/rev2/inband_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev2/multi_2rxhb_2tx.rbf '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making install in rev4
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
/usr/bin/install -c -m 644 ../../../../../fpga/rbf/rev4/std_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev4/std_4rx_0tx.rbf ../../../../../fpga/rbf/rev4/inband_1rxhb_1tx.rbf ../../../../../fpga/rbf/rev4/inband_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev4/multi_2rxhb_2tx.rbf '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making install in doc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make install-recursive
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making install in other
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[7]: Nothing to be done for 'install-exec-am'.
make[7]: Nothing to be done for 'install-data-am'.
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p /build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-/html
cp -r html /build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-'
/usr/bin/install -c -m 644 ../../../README '/build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making install in firmware
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making install in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/include/usrp'
/usr/bin/install -c -m 644 ../../../../firmware/include/usrp_i2c_addr.h ../../../../firmware/include/usrp_spi_defs.h ../../../../firmware/include/fpga_regs_common.h ../../../../firmware/include/fpga_regs_standard.h '/build/libusrp-3.4.9.1-7530/_inst/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making install in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making install in src
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making install in common
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making install in usrp2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/install -c -m 644 std.ihx '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
/usr/bin/install -c -m 644 std.ihx '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig'
/usr/bin/install -c -m 644 usrp.pc '/build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making installcheck in host
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making installcheck in misc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making installcheck in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making installcheck in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making installcheck in usrp
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making installcheck in apps
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making installcheck in fpga
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making installcheck in rbf
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making installcheck in rev2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making installcheck in rev4
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making installcheck in doc
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making installcheck in other
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making installcheck in firmware
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making installcheck in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making installcheck in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making installcheck in src
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making installcheck in common
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making installcheck in usrp2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making uninstall in host
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making uninstall in misc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making uninstall in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
/bin/bash ../../libtool --mode=uninstall rm -f '/build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la'
libtool: uninstall: rm -f /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1.0.0 /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1 /build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so
Skipping uninstall-usrpythonPYTHON (OS#5609)
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making uninstall in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making uninstall in usrp
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
( cd '/build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig' && rm -f db_base.i )
( cd '/build/libusrp-3.4.9.1-7530/_inst/include/usrp' && rm -f db_base.h db_basic.h db_bitshark_rx.h db_dbs_rx.h db_dtt754.h db_dtt768.h db_flexrf.h db_flexrf_mimo.h db_tv_rx.h db_tv_rx_mimo.h db_wbxng.h db_xcvr2450.h libusb_types.h usrp_basic.h usrp_bytesex.h usrp_dbid.h usrp_local_sighandler.h usrp_prims.h usrp_slots.h usrp_standard.h usrp_subdev_spec.h usrp_tune_result.h )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making uninstall in apps
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
( cd '/build/libusrp-3.4.9.1-7530/_inst/bin' && rm -f usrper usrp_cal_dc_offset )
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making uninstall in fpga
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making uninstall in rbf
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making uninstall in rev2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
( cd '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2' && rm -f std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making uninstall in rev4
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
( cd '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4' && rm -f std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making uninstall in doc
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making uninstall in other
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
( cd '/build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-' && rm -f README )
rm -rf /build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-/html
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making uninstall in firmware
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making uninstall in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
( cd '/build/libusrp-3.4.9.1-7530/_inst/include/usrp' && rm -f usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h )
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making uninstall in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making uninstall in src
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making uninstall in common
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making uninstall in usrp2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
( cd '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2' && rm -f std.ihx )
( cd '/build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4' && rm -f std.ihx )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
( cd '/build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig' && rm -f usrp.pc )
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make install-recursive
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making install in host
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making install in misc
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making install in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: '../../../../host/lib/stamp-sources-generate' is up to date.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libusrp.la '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib'
libtool: install: /usr/bin/install -c .libs/libusrp.so.1.0.0 /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1.0.0
libtool: install: (cd /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib && { ln -s -f libusrp.so.1.0.0 libusrp.so.1 || { rm -f libusrp.so.1 && ln -s libusrp.so.1.0.0 libusrp.so.1; }; })
libtool: install: (cd /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib && { ln -s -f libusrp.so.1.0.0 libusrp.so || { rm -f libusrp.so && ln -s libusrp.so.1.0.0 libusrp.so; }; })
libtool: install: /usr/bin/install -c .libs/libusrp.lai /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la
libtool: warning: remember to run 'libtool --finish /build/libusrp-3.4.9.1-7530/_inst/lib'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making install in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making install in usrp
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig'
/usr/bin/install -c -m 644 ../../../../../host/include/usrp/db_base.i '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig'
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp'
/usr/bin/install -c -m 644 ../../../../../host/include/usrp/db_base.h ../../../../../host/include/usrp/db_basic.h ../../../../../host/include/usrp/db_bitshark_rx.h ../../../../../host/include/usrp/db_dbs_rx.h ../../../../../host/include/usrp/db_dtt754.h ../../../../../host/include/usrp/db_dtt768.h ../../../../../host/include/usrp/db_flexrf.h ../../../../../host/include/usrp/db_flexrf_mimo.h ../../../../../host/include/usrp/db_tv_rx.h ../../../../../host/include/usrp/db_tv_rx_mimo.h ../../../../../host/include/usrp/db_wbxng.h ../../../../../host/include/usrp/db_xcvr2450.h libusb_types.h ../../../../../host/include/usrp/usrp_basic.h ../../../../../host/include/usrp/usrp_bytesex.h ../../../../../host/include/usrp/usrp_dbid.h ../../../../../host/include/usrp/usrp_local_sighandler.h ../../../../../host/include/usrp/usrp_prims.h ../../../../../host/include/usrp/usrp_slots.h ../../../../../host/include/usrp/usrp_standard.h ../../../../../host/include/usrp/usrp_subdev_spec.h ../../../../../host/include/usrp/usrp_tune_result.h '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making install in apps
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make install-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c usrper usrp_cal_dc_offset '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/bin'
libtool: warning: '../../host/lib/libusrp.la' has not been installed in '/build/libusrp-3.4.9.1-7530/_inst/lib'
libtool: install: /usr/bin/install -c .libs/usrper /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/bin/usrper
libtool: warning: '../../host/lib/libusrp.la' has not been installed in '/build/libusrp-3.4.9.1-7530/_inst/lib'
libtool: install: /usr/bin/install -c .libs/usrp_cal_dc_offset /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/bin/usrp_cal_dc_offset
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making install in fpga
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making install in rbf
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making install in rev2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/install -c -m 644 ../../../../../fpga/rbf/rev2/std_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev2/std_4rx_0tx.rbf ../../../../../fpga/rbf/rev2/inband_1rxhb_1tx.rbf ../../../../../fpga/rbf/rev2/inband_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev2/multi_2rxhb_2tx.rbf '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making install in rev4
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
/usr/bin/install -c -m 644 ../../../../../fpga/rbf/rev4/std_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev4/std_4rx_0tx.rbf ../../../../../fpga/rbf/rev4/inband_1rxhb_1tx.rbf ../../../../../fpga/rbf/rev4/inband_2rxhb_2tx.rbf ../../../../../fpga/rbf/rev4/multi_2rxhb_2tx.rbf '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making install in doc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make install-recursive
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making install in other
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make install-am
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[7]: Nothing to be done for 'install-exec-am'.
make[7]: Nothing to be done for 'install-data-am'.
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-/html
cp -r html /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-'
/usr/bin/install -c -m 644 ../../../README '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making install in firmware
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making install in include
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp'
/usr/bin/install -c -m 644 ../../../../firmware/include/usrp_i2c_addr.h ../../../../firmware/include/usrp_spi_defs.h ../../../../firmware/include/fpga_regs_common.h ../../../../firmware/include/fpga_regs_standard.h '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making install in lib
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making install in src
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making install in common
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making install in usrp2
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/install -c -m 644 std.ihx '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2'
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
/usr/bin/install -c -m 644 std.ihx '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig'
/usr/bin/install -c -m 644 usrp.pc '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making uninstall in host
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making uninstall in misc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making uninstall in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
/bin/bash ../../libtool --mode=uninstall rm -f '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la'
libtool: uninstall: rm -f /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.la /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1.0.0 /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so.1 /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/libusrp.so
Skipping uninstall-usrpythonPYTHON (OS#5609)
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making uninstall in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making uninstall in usrp
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/gnuradio/swig' && rm -f db_base.i )
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp' && rm -f db_base.h db_basic.h db_bitshark_rx.h db_dbs_rx.h db_dtt754.h db_dtt768.h db_flexrf.h db_flexrf_mimo.h db_tv_rx.h db_tv_rx_mimo.h db_wbxng.h db_xcvr2450.h libusb_types.h usrp_basic.h usrp_bytesex.h usrp_dbid.h usrp_local_sighandler.h usrp_prims.h usrp_slots.h usrp_standard.h usrp_subdev_spec.h usrp_tune_result.h )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making uninstall in apps
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/bin' && rm -f usrper usrp_cal_dc_offset )
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making uninstall in fpga
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making uninstall in rbf
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making uninstall in rev2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2' && rm -f std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making uninstall in rev4
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4' && rm -f std_2rxhb_2tx.rbf std_4rx_0tx.rbf inband_1rxhb_1tx.rbf inband_2rxhb_2tx.rbf multi_2rxhb_2tx.rbf )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making uninstall in doc
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making uninstall in other
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-' && rm -f README )
rm -rf /tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/doc/usrp-/html
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making uninstall in firmware
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making uninstall in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/include/usrp' && rm -f usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h )
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making uninstall in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making uninstall in src
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making uninstall in common
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making uninstall in usrp2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev2' && rm -f std.ihx )
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/share/usrp/rev4' && rm -f std.ihx )
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
( cd '/tmp/am-dc-7078//build/libusrp-3.4.9.1-7530/_inst/lib/pkgconfig' && rm -f usrp.pc )
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make distdir-am
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
if test -d "libusrp-3.4.9.1-7530"; then find "libusrp-3.4.9.1-7530" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.9.1-7530" || { sleep 5 && rm -rf "libusrp-3.4.9.1-7530"; }; else :; fi
test -d "libusrp-3.4.9.1-7530" || mkdir "libusrp-3.4.9.1-7530"
(cd host && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/host \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make distdir-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
(cd misc && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/misc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
(cd lib && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/lib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[7]: '../../../../host/lib/stamp-sources-generate' is up to date.
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
(cd include && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
(cd usrp && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/host/include/usrp \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make distdir-am
make[9]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[9]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[8]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
(cd apps && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/apps \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
(cd swig && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/host/swig \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
(cd fpga && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/fpga \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make distdir-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
(cd rbf && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/fpga/rbf \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
(cd rev2 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/fpga/rbf/rev2 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make distdir-am
make[9]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[9]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
make[8]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
(cd rev4 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/fpga/rbf/rev4 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make distdir-am
make[9]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[9]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[8]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
(cd doc && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
(cd other && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/doc/other \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
(cd firmware && make top_distdir=../libusrp-3.4.9.1-7530 distdir=../libusrp-3.4.9.1-7530/firmware \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make distdir-am
make[5]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
(cd include && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
(cd lib && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/lib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
(cd src && make top_distdir=../../libusrp-3.4.9.1-7530 distdir=../../libusrp-3.4.9.1-7530/firmware/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make distdir-am
make[7]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
(cd common && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/firmware/src/common \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make distdir-am
make[9]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[9]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
make[8]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
(cd usrp2 && make top_distdir=../../../libusrp-3.4.9.1-7530 distdir=../../../libusrp-3.4.9.1-7530/firmware/src/usrp2 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make distdir-am
make[9]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[9]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[8]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[7]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[6]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[5]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make \
top_distdir="libusrp-3.4.9.1-7530" distdir="libusrp-3.4.9.1-7530" \
dist-hook
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
echo 3.4.9.1-7530 > libusrp-3.4.9.1-7530/.tarball-version
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
test -n "" \
|| find "libusrp-3.4.9.1-7530" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/libusrp-3.4.9.1-7530/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "libusrp-3.4.9.1-7530"
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
tardir=libusrp-3.4.9.1-7530 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >libusrp-3.4.9.1-7530.tar.gz
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
if test -d "libusrp-3.4.9.1-7530"; then find "libusrp-3.4.9.1-7530" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.9.1-7530" || { sleep 5 && rm -rf "libusrp-3.4.9.1-7530"; }; else :; fi
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
make[1]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
Making distclean in host
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making distclean in misc
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z "libmisc.la" || rm -f libmisc.la
rm -f ./so_locations
rm -f *.o
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../../host/misc" || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/bug_work_around_8.Plo
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/misc'
Making distclean in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
test -z "guile.log" || rm -f guile.log
test -z "libusrp.la" || rm -f libusrp.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
test -z "../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py .deps/stamp-sources-generate* *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/* stamp-sources-generate" || rm -f ../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py .deps/stamp-sources-generate* *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/* stamp-sources-generate
rm -f *.lo
rm -f *.tab.c
test -z "std_paths.h" || rm -f std_paths.h
test . = "../../../../host/lib" || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/db_base.Plo
rm -f ./.deps/db_basic.Plo
rm -f ./.deps/db_bitshark_rx.Plo
rm -f ./.deps/db_boards.Plo
rm -f ./.deps/db_dbs_rx.Plo
rm -f ./.deps/db_dtt754.Plo
rm -f ./.deps/db_dtt768.Plo
rm -f ./.deps/db_flexrf.Plo
rm -f ./.deps/db_flexrf_mimo.Plo
rm -f ./.deps/db_tv_rx.Plo
rm -f ./.deps/db_tv_rx_mimo.Plo
rm -f ./.deps/db_util.Plo
rm -f ./.deps/db_wbxng.Plo
rm -f ./.deps/db_wbxng_adf4350.Plo
rm -f ./.deps/db_wbxng_adf4350_regs.Plo
rm -f ./.deps/db_xcvr2450.Plo
rm -f ./.deps/fusb.Plo
rm -f ./.deps/fusb_darwin.Plo
rm -f ./.deps/fusb_generic.Plo
rm -f ./.deps/fusb_libusb1.Plo
rm -f ./.deps/fusb_linux.Plo
rm -f ./.deps/fusb_ra_wb.Plo
rm -f ./.deps/fusb_sysconfig_darwin.Plo
rm -f ./.deps/fusb_sysconfig_generic.Plo
rm -f ./.deps/fusb_sysconfig_libusb1.Plo
rm -f ./.deps/fusb_sysconfig_linux.Plo
rm -f ./.deps/fusb_sysconfig_ra_wb.Plo
rm -f ./.deps/fusb_sysconfig_win32.Plo
rm -f ./.deps/fusb_win32.Plo
rm -f ./.deps/md5.Plo
rm -f ./.deps/usrp_basic.Plo
rm -f ./.deps/usrp_config.Plo
rm -f ./.deps/usrp_dbid.Plo
rm -f ./.deps/usrp_local_sighandler.Plo
rm -f ./.deps/usrp_prims_common.Plo
rm -f ./.deps/usrp_prims_libusb0.Plo
rm -f ./.deps/usrp_prims_libusb1.Plo
rm -f ./.deps/usrp_standard.Plo
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/lib'
Making distclean in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making distclean in usrp
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "libusb_types.h" || rm -f libusb_types.h
test . = "../../../../../host/include/usrp" || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f Makefile
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include/usrp'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../host/include" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/include'
Making distclean in apps
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
rm -f usrper usrp_cal_dc_offset
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
rm -f check_order_quickly test_usrp_standard_rx test_usrp_standard_tx
rm -f *.o
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../../host/apps" || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/check_order_quickly.Po
rm -f ./.deps/test_usrp_standard_rx.Po
rm -f ./.deps/test_usrp_standard_tx.Po
rm -f ./.deps/time_stuff.Po
rm -f ./.deps/usrp_cal_dc_offset.Po
rm -f ./.deps/usrper.Po
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/apps'
Making distclean in swig
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
test -z "guile.log python/*.lo python/*.o python/*.d guile/*.lo guile/*.o guile/*.d" || rm -f guile.log python/*.lo python/*.o python/*.d guile/*.lo guile/*.o guile/*.d
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "../../../../host/swig" || test -z "" || rm -f
test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host/swig'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../host" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
rm -f Makefile
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/host'
Making distclean in fpga
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making distclean in rbf
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
Making distclean in rev2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "../../../../../fpga/rbf/rev2" || test -z "" || rm -f
test -z "" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev2'
Making distclean in rev4
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "../../../../../fpga/rbf/rev4" || test -z "" || rm -f
test -z "" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf/rev4'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../fpga/rbf" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga/rbf'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../fpga" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
rm -f Makefile
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/fpga'
Making distclean in doc
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making distclean in other
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/other" || test -z "" || rm -f
test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc/other'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
rm -rf latex html man xml
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "Doxyfile" || rm -f Doxyfile
test . = "../../../doc" || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/doc'
Making distclean in firmware
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
Making distclean in include
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../firmware/include" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/include'
Making distclean in lib
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../firmware/lib" || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/lib'
Making distclean in src
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
Making distclean in common
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../../firmware/src/common" || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h " || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h
rm -f Makefile
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/common'
Making distclean in usrp2
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib *.lk usrp_gpif.c usrp_gpif_inline.h burn-usrp2-eeprom burn-usrp4-eeprom" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib *.lk usrp_gpif.c usrp_gpif_inline.h burn-usrp2-eeprom burn-usrp4-eeprom
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../../firmware/src/usrp2" || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
rm -f Makefile
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src/usrp2'
make[4]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../firmware/src" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[4]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
rm -f Makefile
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware/src'
make[3]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../firmware" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
rm -f Makefile
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub/firmware'
make[2]: Entering directory '/build/libusrp-3.4.9.1-7530/_build/sub'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z "../../.version *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f ../../.version *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm: cannot remove '../../.version': Permission denied
rm -f *.lo
make[2]: [Makefile:962: mostlyclean-generic] Error 1 (ignored)
test -z "usrp.pc usrp.iss" || rm -f usrp.pc usrp.iss
test . = "../.." || test -z "" || rm -f
test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/libusrp-3.4.9.1-7530/_build/sub'
if test -d "libusrp-3.4.9.1-7530"; then find "libusrp-3.4.9.1-7530" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.9.1-7530" || { sleep 5 && rm -rf "libusrp-3.4.9.1-7530"; }; else :; fi
======================================================
libusrp-3.4.9.1-7530 archives ready for distribution:
libusrp-3.4.9.1-7530.tar.gz
======================================================
+ make maintainer-clean
Making maintainer-clean in host
make[1]: Entering directory '/build/host'
Making maintainer-clean in misc
make[2]: Entering directory '/build/host/misc'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z "libmisc.la" || rm -f libmisc.la
rm -f ./so_locations
rm -f *.o
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/bug_work_around_8.Plo
rm -f Makefile
make[2]: Leaving directory '/build/host/misc'
Making maintainer-clean in lib
make[2]: Entering directory '/build/host/lib'
test -z "guile.log" || rm -f guile.log
test -z "libusrp.la" || rm -f libusrp.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
test -z "../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py .deps/stamp-sources-generate* *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/* stamp-sources-generate" || rm -f ../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py .deps/stamp-sources-generate* *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/* stamp-sources-generate
rm -f *.lo
rm -f *.tab.c
test -z "std_paths.h" || rm -f std_paths.h
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py" || rm -f ../../usrp/host/include/usrp/usrp_dbid.h usrp_dbid.cc usrp_dbid.py
rm -f ./.deps/db_base.Plo
rm -f ./.deps/db_basic.Plo
rm -f ./.deps/db_bitshark_rx.Plo
rm -f ./.deps/db_boards.Plo
rm -f ./.deps/db_dbs_rx.Plo
rm -f ./.deps/db_dtt754.Plo
rm -f ./.deps/db_dtt768.Plo
rm -f ./.deps/db_flexrf.Plo
rm -f ./.deps/db_flexrf_mimo.Plo
rm -f ./.deps/db_tv_rx.Plo
rm -f ./.deps/db_tv_rx_mimo.Plo
rm -f ./.deps/db_util.Plo
rm -f ./.deps/db_wbxng.Plo
rm -f ./.deps/db_wbxng_adf4350.Plo
rm -f ./.deps/db_wbxng_adf4350_regs.Plo
rm -f ./.deps/db_xcvr2450.Plo
rm -f ./.deps/fusb.Plo
rm -f ./.deps/fusb_darwin.Plo
rm -f ./.deps/fusb_generic.Plo
rm -f ./.deps/fusb_libusb1.Plo
rm -f ./.deps/fusb_linux.Plo
rm -f ./.deps/fusb_ra_wb.Plo
rm -f ./.deps/fusb_sysconfig_darwin.Plo
rm -f ./.deps/fusb_sysconfig_generic.Plo
rm -f ./.deps/fusb_sysconfig_libusb1.Plo
rm -f ./.deps/fusb_sysconfig_linux.Plo
rm -f ./.deps/fusb_sysconfig_ra_wb.Plo
rm -f ./.deps/fusb_sysconfig_win32.Plo
rm -f ./.deps/fusb_win32.Plo
rm -f ./.deps/md5.Plo
rm -f ./.deps/usrp_basic.Plo
rm -f ./.deps/usrp_config.Plo
rm -f ./.deps/usrp_dbid.Plo
rm -f ./.deps/usrp_local_sighandler.Plo
rm -f ./.deps/usrp_prims_common.Plo
rm -f ./.deps/usrp_prims_libusb0.Plo
rm -f ./.deps/usrp_prims_libusb1.Plo
rm -f ./.deps/usrp_standard.Plo
rm -f Makefile
make[2]: Leaving directory '/build/host/lib'
Making maintainer-clean in include
make[2]: Entering directory '/build/host/include'
Making maintainer-clean in usrp
make[3]: Entering directory '/build/host/include/usrp'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "libusb_types.h" || rm -f libusb_types.h
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/host/include/usrp'
make[3]: Entering directory '/build/host/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/host/include'
rm -f Makefile
make[2]: Leaving directory '/build/host/include'
Making maintainer-clean in apps
make[2]: Entering directory '/build/host/apps'
rm -f usrper usrp_cal_dc_offset
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
rm -f check_order_quickly test_usrp_standard_rx test_usrp_standard_tx
rm -f *.o
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/check_order_quickly.Po
rm -f ./.deps/test_usrp_standard_rx.Po
rm -f ./.deps/test_usrp_standard_tx.Po
rm -f ./.deps/time_stuff.Po
rm -f ./.deps/usrp_cal_dc_offset.Po
rm -f ./.deps/usrper.Po
rm -f Makefile
make[2]: Leaving directory '/build/host/apps'
Making maintainer-clean in swig
make[2]: Entering directory '/build/host/swig'
test -z "guile.log python/*.lo python/*.o python/*.d guile/*.lo guile/*.o guile/*.d" || rm -f guile.log python/*.lo python/*.o python/*.d guile/*.lo guile/*.o guile/*.d
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z " " || rm -f
rm -f Makefile
make[2]: Leaving directory '/build/host/swig'
make[2]: Entering directory '/build/host'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/host'
rm -f Makefile
make[1]: Leaving directory '/build/host'
Making maintainer-clean in fpga
make[1]: Entering directory '/build/fpga'
Making maintainer-clean in rbf
make[2]: Entering directory '/build/fpga/rbf'
Making maintainer-clean in rev2
make[3]: Entering directory '/build/fpga/rbf/rev2'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/fpga/rbf/rev2'
Making maintainer-clean in rev4
make[3]: Entering directory '/build/fpga/rbf/rev4'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/fpga/rbf/rev4'
make[3]: Entering directory '/build/fpga/rbf'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/fpga/rbf'
rm -f Makefile
make[2]: Leaving directory '/build/fpga/rbf'
make[2]: Entering directory '/build/fpga'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/fpga'
rm -f Makefile
make[1]: Leaving directory '/build/fpga'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in other
make[2]: Entering directory '/build/doc/other'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory '/build/doc/other'
make[2]: Entering directory '/build/doc'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
rm -rf latex html man xml
test -z " *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "Doxyfile" || rm -f Doxyfile
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in firmware
make[1]: Entering directory '/build/firmware'
Making maintainer-clean in include
make[2]: Entering directory '/build/firmware/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/firmware/include'
Making maintainer-clean in lib
make[2]: Entering directory '/build/firmware/lib'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/firmware/lib'
Making maintainer-clean in src
make[2]: Entering directory '/build/firmware/src'
Making maintainer-clean in common
make[3]: Entering directory '/build/firmware/src/common'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h " || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib usrp_gpif.c usrp_gpif_inline.h
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/firmware/src/common'
Making maintainer-clean in usrp2
make[3]: Entering directory '/build/firmware/src/usrp2'
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib *.lk usrp_gpif.c usrp_gpif_inline.h burn-usrp2-eeprom burn-usrp4-eeprom" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib *.lk usrp_gpif.c usrp_gpif_inline.h burn-usrp2-eeprom burn-usrp4-eeprom
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib" || rm -f *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/firmware/src/usrp2'
make[3]: Entering directory '/build/firmware/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/firmware/src'
rm -f Makefile
make[2]: Leaving directory '/build/firmware/src'
make[2]: Entering directory '/build/firmware'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/firmware'
rm -f Makefile
make[1]: Leaving directory '/build/firmware'
make[1]: Entering directory '/build'
test -z "guile.log" || rm -f guile.log
rm -rf .libs _libs
test -z "./.version *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*" || rm -f ./.version *.pyc *.pyo *~ *.tmp *.loT .unittests/* .unittests/python/*
rm -f *.lo
test -z "usrp.pc usrp.iss" || rm -f usrp.pc usrp.iss
test . = "." || test -z "" || rm -f
test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
[osmocom-master] $ /bin/sh -xe /tmp/jenkins15050094629424657151.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-libusrp/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-libusrp/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 897699 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
